r: 02830471 p: 8.429 pid: 43122 b: WERA q: 0 st: lt: 13 ean: 4013288179548 sr: WERA 05020129001 sr_no_br: 05020129001 sr_no_br_cl: 05020129001 sr_cl: WERA05020129001 sr_dash: sold: 202.296 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 4 mm Blade length 100 mm Blade thickness 0,8 mm ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No Drive type Slotted n: WERA 160 iSS VDE insulated cutting screwdriver, reduced-diameter blade, extra-slim handle 0.8 x 4 x 100mm - 05020129001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description VDE insulated slotted screwdriver with reduced blade and handle diameter, suitable for actuating low-lying screws in particularly confined working spaces. Multi-component Kraftform Plus handle for fast and low-fatigue working: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Individual testing at 10,000 volts so as to ensure safe working at the permitted voltage of 1,000 volts. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Reduced blade and handle diameter Application Slotted screws and actuating tool for spring terminals Blade Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900 Design Conical blade, zinc-phosphated Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The super slim screwdrivers for installation jobs in particularly confined spaces. Not only do the blades have a reduced diameter, the handles also have a very slim design. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces - resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 160 iSS VDE Insulated screwdriver with reduced blade and handle diameter for slotted screws, 0.8 x 4 x 100 mm kts: VDE insulated cutting screwdriver, reduced-diameter blade, extra-slim handle 0.8 x 4 x 100mm kpn: 160 iSS kpn_dash: kpn_clear: 160iSS bkpn: WERA 160 iSS bkpn_clear: WERA 160iSS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05020129001 sr_ns: WERA05020129001
r: 03176901 p: 28.76 pid: 31948 b: WERA q: 0 st: lt: 7 ean: 4013288218872 sr: WERA 05020505001 sr_no_br: 05020505001 sr_no_br_cl: 05020505001 sr_cl: WERA05020505001 sr_dash: sold: 201.32 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 36 mm Length 330 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (30 x 330 mm) - 05020505001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 30 x 330 mm kts: ring spanner (30 x 330 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020505001 sr_ns: WERA05020505001
r: 02835450 p: 7.44 pid: 41989 b: WERA q: 2 st: 1 lt: 1 ean: 4013288031877 sr: WERA 05118002001 sr_no_br: 05118002001 sr_no_br_cl: 05118002001 sr_cl: WERA05118002001 sr_dash: sold: 200.88 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size Slotted 1,5 mm Blade length 40 mm Blade thickness 0,23 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted Product Range Wera Kraftform n: WERA 2035 Micro Kraftform cutting screwdriver, 0.23 x 1.5 x 40 mm - 05118002001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro screwdriver for slotted screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Anti-roll feature and rotating cap for rapid twisting The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Application Slotted screws Blade Round Design Chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Indispensable for many users, including electronics technicians, opticians, precision engineers, jewellers, EDP hardware fitters and model-makers ds: dsc: Scope of delivery 2035 Screwdriver for slotted screws for electronic applications, 0.23 x 1.5 x 40 mm kts: Kraftform cutting screwdriver, 0.23 x 1.5 x 40 mm kpn: 2035 Micro kpn_dash: kpn_clear: 2035Micro bkpn: WERA 2035 Micro bkpn_clear: WERA 2035Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118002001 sr_ns: WERA05118002001
r: 03230288 p: 49.752 pid: 70156 b: WERA q: 0 st: lt: 11 ean: 4013288223258 sr: WERA 05005450001 sr_no_br: 05005450001 sr_no_br_cl: 05005450001 sr_cl: WERA05005450001 sr_dash: sold: 199.008 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Type of drive profile (socket) Hexagonal Connection size 3/8" Min. socket size 1/4 inch; 3/4 inch Quantity per set 9 Product Range Wera Zyklop n: WERA B Imperial 1 Zyklop socket set 3/8" on magnetic strip in inch 9-piece - 05005450001 cn: HAND SOCKET SET cn2: HAND SOCKET SET cn_clear: HANDSOCKETSET d: Product description Socket rail with 9 manual and machine sockets (non-impact), 3/8". A smooth rotary mechanism allows a secure hold and easy access of the sockets. With Take it easy tool finder with colour coding by size - to help you find the required tool quickly and easily. The rail allows temporary attachment to metallic surfaces and, with its twist-to-unlock function, ensures secure locking and unlocking of the sockets. 9-piece socket set on socket rail, 3/8" Magnetic rail with secure socket mounting and yet easy removal (twist-to-unlock) for temporary attachment on wall, shelf or workshop trolley Smooth rotary mechanism for a secure hold and easy access of the tools With Take it easy tool finder: colour coding by size For manual and power tool operations (non-impact) 9-piece set; on rail for temporary attachment on walls, shelves, workshop trolleys. Smooth rotary mechanism for safe storage and easy access of the tool.9 Zyklop sockets with 3/8" drive. Take it easy tool finder: With colour coding by size - to help you find the required tool quickly and easily. Features and benefits The manual and machine sockets can be used both for hand and power tools use (non-impact). Users need just one socket set for all applications. Knurling on lower end for more grip when used manually. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). With its twist-to-unlock mechanism, the socket rail ensures easy access of the sockets. At the same time the sockets are held securely. Thanks to the magnet, the rail is suitable for temporary attachment to the wall, shelf or workshop trolley. ds: dsc: Scope of delivery Magnetic socket rail B Imperial 1 Zyklop socket set 3/8" drive, imperial, 9 pieces 9x 8790 HMB Zyklop socket with 3/8" drive: 1/4"x29 mm, 5/16"x29 mm, 11/32"x29 mm, 3/8"x29 mm, 7/16"x29 mm, 1/2"x29 mm, 9/16"x29 mm, 5/8"x30 mm, 3/4"x30 mm 1x 9601 Magnetic socket rail, 3/8", empty: 30 x 340 mm kts: socket set 3/8" on magnetic strip in inch 9-piece kpn: B Imperial 1 Zyklop kpn_dash: kpn_clear: BImperial1Zyklop bkpn: WERA B Imperial 1 Zyklop bkpn_clear: WERA BImperial1Zyklop c_path: Home / Tools / Hand tools / Sockets and ratchets / Sets / Hand socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sets / Wera hand socket set | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05005450001 sr_ns: WERA05005450001
r: 02828301 p: 6.63 pid: 42851 b: WERA q: 0 st: lt: 12 ean: 4013288111081 sr: WERA 05071034001 sr_no_br: 05071034001 sr_no_br_cl: 05071034001 sr_cl: WERA05071034001 sr_dash: sold: 198.9 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 20 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T20 n: WERA 3867/1 TS TORX bit, stainless steel, TX 20 x 25 mm - 05071034001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits out of stainless steel for recessed TORX® screws. Wera stainless are made out of stainless steel which prevents the formation of unsightly extraneous rust. Come with Torsion zone: Torsion bits take-up torque peaks and absorb them in the Torsion zone. This prevents premature wear and extends the service life of the bit. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For recessed TORX® screws Stainless Steel Bits Solution to the extraneous rust problem: fasten stainless screws with stainless tools Vacuum ice-hardened Torsion design against premature wear Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Stainless steel for minimising rust, special torsion-style design to reduce premature wear. Take it easy. tool finder: Output colour coding (green = TORX®) and large stamp to enable the desired bit to be easily located. Features and benefits Wera stainless steel bits are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel bits from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Torsion bits (T) absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 3867/1 TS TORX® bits, stainless, TX 20 x 25 mm kts: bit, stainless steel, TX 20 x 25 mm kpn: 3867/1 TS TORX kpn_dash: kpn_clear: 38671TSTORX bkpn: WERA 3867/1 TS TORX bkpn_clear: WERA 38671TSTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05071034001 sr_ns: WERA05071034001
r: 03166688 p: 7.603 pid: 31338 b: WERA q: 1 st: 1 lt: 1 ean: 4013288212528 sr: WERA 05020200001 sr_no_br: 05020200001 sr_no_br_cl: 05020200001 sr_cl: WERA05020200001 sr_dash: sold: 197.678 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 8 mm Length 115 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (8 x 115 mm) - 05020200001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 8 x 115 mm kts: ring spanner (8 x 115 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020200001 sr_ns: WERA05020200001
r: 02263375 p: 9.876 pid: 43996 b: WERA q: 0 st: lt: 8 ean: 4013288033192 sr: WERA 05066646001 sr_no_br: 05066646001 sr_no_br_cl: 05066646001 sr_cl: WERA05066646001 sr_dash: sold: 197.52 p_range: none type: standard act: 1 avo: 1 av: Length 32 mm Blade thickness Type of drive profile (bit) Torq-set Connection size (bit) 1/4" VDE approved No Bit tip Torq-set 1/4" Drive profile size (bit) 1/4" n: WERA 871/1 DC TORQ-SET Mplus bit, 1/4" x 32 mm - 05066646001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for TORQ-SET® screws. The stronger flanks - when compared with the conventional TORQ-SET® profile - result in 70% more breaking torque and thereby enhanced durability whilst at the same time providing a perfect fit in the screw head. The diamond coating of the bit ensures a secure fit in the screw, reduces the contact pressure required and lowers the risk of slipping. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For TORQ-SET® screws Mplus for more breaking torque and longer service life Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out 1/4" hexagon drive (Wera connecting series 1) Application TORQ-SET® screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Mplus for higher breaking torque and longer service life, diamond-coated for secure screw fit Features and benefits Wera developed the Mplus profile with stronger flanks compared with tools with a conventional TORQ-SET® profile. This results in approximately 70 % extra torsional strength and greatly extends the service life of Wera Mplus tools. The diamond coating of the DC bits lowers the danger of slipping as the minute diamond particles literally "bite" themselves into the screw head. Today, the Wera diamond bit - manufactured with the technology specifically developed by Wera for this application - still sets the standard in terms of resilience and functionality. Wera bits with a diamond coating ensure a secure fit of the bit in the screw head. The minute diamond particles applied to the tip of the tool literally "bite" into the screw and ensure an exact, anti-slip fit in the head of the screw. This secure fit protects the screw. The cam-out forces which compel the user to apply greater pressure to the screw are considerably reduced. Ideal for sensitive materials ds: dsc: Scope of delivery 871/1 DC TORQ-SET® Mplus bits, 1/4" x 32 mm kts: bit, 1/4" x 32 mm kpn: 871/1 DC TORQ-SET Mplus kpn_dash: 871/1 DC TORQ kpn_clear: 8711DCTORQSETMplus bkpn: WERA 871/1 DC TORQ-SET Mplus bkpn_clear: WERA 8711DCTORQSETMplus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066646001 sr_ns: WERA05066646001
r: 08131705 p: 196.528 pid: 173494 b: WERA q: 0 st: lt: 8 ean: 4013288233660 sr: WERA 05075695001 sr_no_br: 05075695001 sr_no_br_cl: 05075695001 sr_cl: WERA05075695001 sr_dash: sold: 196.528 p_range: KLIUM_PRODUCT_RANGE_305 type: standard act: 1 avo: 1 av: Min. tightening torque 40 Nm Drive profile size 1/2" VDE approved No With safety colour code 1000V ESD No Display Analogue Adjustable torque range 40-200 Nm Max. tightening torque 200 Nm Product Range Wera Click-Torque Lock n: WERA Click-Torque Lock C 3 R/L torque spanner, adjustable, Torque Lock function, piercing square 1/2", clockwise and anticlockwise tightening, 40-200 Nm - 05075695001 cn: TORQUE WRENCH cn2: TORQUE WRENCH cn_clear: TORQUEWRENCH d: Product description Adjustable torque wrench for controlled clockwise and counterclockwise torque operation. With 1/2" square head drive. The torque function can be deactivated (Torque Lock function), so that the tool can also be used for loosening. Easy setting and saving of the default value. The audible and tactile clicks on reaching the scale values facilitate the safe setting of the desired torque value. The robust release mechanism guarantees a clearly audible and tactile release signal when the set torque value is reached. Fine-toothed reversible ratchet with 45 teeth. Accuracy of ±3 % as per DIN EN ISO 6789-1:2017-07. For clockwise and counterclockwise operation Torque Lock function: The torque function can be deactivated so that the tool can also be used for loosening screws and bolts With square head insert (including patent-registered socket locking) Extra click: audible and tactile torque setting Torque wrench gives an audible and tactile signal Application For clockwise and counterclockwise torque operation. The torque function can be deactivated (Torque Lock function), so that the tool can also be used for loosening. Precision Accuracy ±3 % of the set value, as per DIN EN ISO 6789-1:2017-07 Design With 1/2" square head drive with socket locking, square head insert to change the tightening direction, fine-toothed ratchet mechanism, 45 teeth; easy setting and saving of the desired torque value, with audible and tactile locking when the scale values are reached (fine scale only in Newton meters), audible and tactile release mechanism when the set torque value is reached Handle Ergonomic 2-component handle Features and benefits The torque function can be deactivated so that the tool can also be used for loosening. With square head insert (including patent-registered socket locking) for controlled clockwise and counterclockwise torque operation. Precision of ±3 % as per DIN EN ISO 6789-1:2017-07. Easy setting and saving of the desired torque value; easy to read on main and fine scales. The Click-Torque torque wrench is suitable for clockwise and counterclockwise torque operation. Very smooth change of direction thanks to captive square head insert. With audible and tactile locking when the scale values are reached. On reaching the desired torque value, an audible and tactile mechanism is triggered. ds: dsc: Scope of delivery Click-Torque Lock C 3 R/L torque wrench, adjustable, Torque Lock function, internal square drive (1/2"), clockwise/anti-clockwise torque operation, 40-200 Nm, 1/2" x 40-200 Nm kts: torque spanner, adjustable, Torque Lock function, piercing square 1/2", clockwise and anticlockwise tightening, 40-200 Nm kpn: Click-Torque Lock C 3 R/L kpn_dash: Click kpn_clear: ClickTorqueLockC3RL bkpn: WERA Click-Torque Lock C 3 R/L bkpn_clear: WERA ClickTorqueLockC3RL c_path: Home / Tools / Hand tools / Torque tools / Torque wrenches / Torque wrench | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque wrenches / Wera torque wrench | Home / Our brands / Wera / Wera Ranges / Wera click-torque lock sr_no_br_cl_ns: 05075695001 sr_ns: WERA05075695001
r: 41070395 p: 7.272 pid: 72438 b: WERA q: 0 st: lt: 12 ean: 4013288018021 sr: WERA 05018264001 sr_no_br: 05018264001 sr_no_br_cl: 05018264001 sr_cl: WERA05018264001 sr_dash: sold: 196.344 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 5,5 mm Blade length 100 mm Blade thickness 1 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted n: WERA 932 A cutting screwdriver, 1 x 5.5 x 100 mm - 05018264001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera chiseldriver for screwdriving, chiseling, mortising and slackening stuck screws. With multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The pound-thru hexagonal blade made of premium bit material ensures power transmission without loss even at hammer blows. Tough tempered material to prevent the blade from splintering or breaking. With integrated impact cap to increase service life and reduce risk of splintering. Higher torques can be transmitted with open-end or ring spanners using the integrated hexagon bolster. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. With hexagon anti-roll protection to avoid bits from rolling away annoyingly in the workplace. Chiseldriver for fastening, chiselling and loosening Hexagonal blade extending through the handle Multi-component Kraftform handle for fast and ergonomic screwdriving Impact cap and bolster for the transfer of higher torque The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Slotted screws Blade Hexagonal throughout with impact cap, hexagonal bolster from 0.8 x 4.5 Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, sizes 2.0 x 12.0, 2.5 x 14.0: Kraftform with non-roll feature, single-component Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 932 A Screwdriver for slotted screws, 1 x 5.5 x 100 mm kts: cutting screwdriver, 1 x 5.5 x 100 mm kpn: 932 A kpn_dash: kpn_clear: 932A bkpn: WERA 932 A bkpn_clear: WERA 932A c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05018264001 sr_ns: WERA05018264001
r: 03166687 p: 13.057 pid: 31318 b: WERA q: 1 st: 1 lt: 1 ean: 4013288212733 sr: WERA 05020208001 sr_no_br: 05020208001 sr_no_br_cl: 05020208001 sr_cl: WERA05020208001 sr_dash: sold: 195.855 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 17 mm Length 190 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (17 x 190 mm) - 05020208001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 17 x 190 mm kts: ring spanner (17 x 190 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020208001 sr_ns: WERA05020208001
r: 08103823 p: 12.231 pid: 70431 b: WERA q: 0 st: lt: 28 ean: 4013288228390 sr: WERA 05136074001 sr_no_br: 05136074001 sr_no_br_cl: 05136074001 sr_cl: WERA05136074001 sr_dash: sold: 195.696 p_range: none type: standard act: 1 avo: 1 av: Length 154 mm n: WERA 9529 C SB step wrench insert for HVAC applications 1/2", 88 mm - 05136074001 cn: RADIATOR KEY cn2: RADIATOR KEY cn_clear: RADIATORKEY d: Product description Step wrench insert (1/2") for HVAC applications: Installation and removal of radiator valves, thermostats, drain fittings, etc. 5 steps (3/8", 7/16", 1/2", 16 and 21 mm) For 1/2" ratchets Chrome vanadium steel Drive 1/2" Application For all standard drain fittings, radiator valves, thermostats, etc. Design 5 steps: 3/8", 7/16", 1/2", 16 and 21 mm; chrome vanadium steel, matt chrome plated Features and benefits The step wrench (1/2") is suitable for all standard drain fittings, radiator valves, thermostats, etc. 5 steps (3/8", 7/16", 1/2", 16 and 21 mm). ds: dsc: Scope of delivery 9529 C SB 1/2" Step wrench, 88 mm kts: step wrench insert for HVAC applications 1/2", 88 mm kpn: 9529 C SB kpn_dash: kpn_clear: 9529CSB bkpn: WERA 9529 C SB bkpn_clear: WERA 9529CSB c_path: Home / Tools / Hand tools / Keys / Keys / Radiator key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera radiator key sr_no_br_cl_ns: 05136074001 sr_ns: WERA05136074001
r: 87010084 p: 2.79 pid: 70713 b: WERA q: 73 st: 1 lt: 1 ean: 4013288015808 sr: WERA 05066315001 sr_no_br: 05066315001 sr_no_br_cl: 05066315001 sr_cl: WERA05066315001 sr_dash: sold: 195.3 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 30 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T30 n: WERA 867/1 TZ TORX bit, TX 30 x 25 mm - 05066315001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For recessed TORX® screws Torsion design against premature wear Prevents premature breakage of the drive tip Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Torsion-style design to reduce premature wear, tough, for universal use Features and benefits TZ-Bits are tough bits with a torsion zone. Torsion bits absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/1 TZ TORX® bits, TX 30 x 25 mm kts: bit, TX 30 x 25 mm kpn: 867/1 TZ TORX kpn_dash: kpn_clear: 8671TZTORX bkpn: WERA 867/1 TZ TORX bkpn_clear: WERA 8671TZTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066315001 sr_ns: WERA05066315001
r: 02357706 p: 6.1 pid: 44517 b: WERA q: 0 st: lt: 14 ean: 4013288112408 sr: WERA 05059602001 sr_no_br: 05059602001 sr_no_br_cl: 05059602001 sr_cl: WERA05059602001 sr_dash: sold: 195.2 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 50 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 1,5 mm Drive profile size (bit) 1,5 mm Product Range Wera Hex-Plus n: WERA 840/4 Z Hex-Plus hexagon bit, 1.5 x 50 mm - 05059602001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z bits, 1.5 x 50 mm kts: hexagon bit, 1.5 x 50 mm kpn: 840/4 Z Hex-Plus kpn_dash: 840/4 Z Hex kpn_clear: 8404ZHexPlus bkpn: WERA 840/4 Z Hex-Plus bkpn_clear: WERA 8404ZHexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05059602001 sr_ns: WERA05059602001
r: 02833019 p: 9.75 pid: 41848 b: WERA q: 0 st: lt: 15 ean: 4013288095077 sr: WERA 05027109001 sr_no_br: 05027109001 sr_no_br_cl: 05027109001 sr_cl: WERA05027109001 sr_dash: sold: 195 p_range: none type: standard act: 1 avo: 1 av: Width across flats 10 mm With ball head Yes With handle No Handle type VDE approved No With safety colour code 1000V No Non-sparking No Blade length 219 mm Short arm length 40 mm Overall length 219 mm n: WERA 950 PKL BM socket spanner metric blacklaser 10 x 219 mm - 05027109001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description High quality L-keys for hexagonal socket screws. Hex-Plus offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. L-keys for hexagonal socket screws Hexagonal socket wrench with Hex-Plus advantage for a longer screw life Hexagonal ballpoint on the long arm BlackLaser for high corrosion protection and long service life Metric Application Hexagon socket screws Design BlackLaser surface Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. L-keys with BlackLaser surface treatment for outstanding surface protection and long service life. High corrosion protection. ds: dsc: Scope of delivery 950 PKL BM L-key, metric, BlackLaser, 10 x 219 mm kts: socket spanner metric blacklaser 10 x 219 mm kpn: 950 PKL BM kpn_dash: kpn_clear: 950PKLBM bkpn: WERA 950 PKL BM bkpn_clear: WERA 950PKLBM c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05027109001 sr_ns: WERA05027109001
r: 02832391 p: 10.247 pid: 20656 b: WERA q: 0 st: lt: 12 ean: 4013288105288 sr: WERA 05160977001 sr_no_br: 05160977001 sr_no_br_cl: 05160977001 sr_cl: WERA05160977001 sr_dash: sold: 194.693 p_range: none type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Connection size (machine) 1/4" Connection type (machine) External hexagon With lock No Magnetic Yes Length 100 mm n: WERA 899/4/1 S universal bit holder with strong clamping ring, 1/4" x 100 mm - 05160977001 cn: BIT HOLDER cn2: BIT HOLDER cn_clear: BITHOLDER d: Product description Universal holder for the take-up of bits with 1/4" hex head drive as per DIN ISO 1173-C 6.3. Stainless sleeve for special corrosion protection. The particularly strong retaining ring ensures an optimum fixing of the tool in the holder. The especially strong permanent magnet makes sure that the bits are held absolutely securely. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Universal holder for the take-up of bits with 1/4" hexagon head drive Stainless sleeve, retaining ring and strong permanent magnet 1/4" hexagon drive (Wera connecting series 4) Strong retaining ring for optimum fit of the tool in the holder Strong permanent magnet holds the bits absolutely securely Application Suitable for 1/4" DIN ISO 1173-C 6,3 hexagon insert bits and Wera Series 1 Design With stainless steel sleeve, strong retaining ring, and strong permanent magnet Drive 1/4" hexagon, suitable for power tools with DIN ISO 1173-F 6,3 receiver Features and benefits The retaining ring and the strong permanent magnet ensure a particularly secure fitting of the bit in the holder. The retaining ring (S = extra strong) and the strong permanent magnet ensure a particularly secure fitting of the bit in the holder. ds: dsc: Scope of delivery 899/4/1 S Universal Bit Holder with strong retaining ring, 1/4" x 100 mm kts: universal bit holder with strong clamping ring, 1/4" x 100 mm kpn: 899/4/1 S kpn_dash: kpn_clear: 89941S bkpn: WERA 899/4/1 S bkpn_clear: WERA 89941S c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Bit holder | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera bit holder sr_no_br_cl_ns: 05160977001 sr_ns: WERA05160977001
r: 41071375 p: 13.884 pid: 70570 b: WERA q: 0 st: lt: 7 ean: 4013288121318 sr: WERA 05003591001 sr_no_br: 05003591001 sr_no_br_cl: 05003591001 sr_cl: WERA05003591001 sr_dash: sold: 194.376 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Connection size 1 3/8" Connection size 2 3/8" Connection type 1 (extension) Outer square Connection type 2 (extension) Internal square Length 125 mm VDE approved No With safety colour code 1000V No Non-sparking No Product Range Wera Zyklop n: WERA 8796 SB Zyklop "Flexible-Lock" extension with free-running sleeve, short for 3/8", 3/8" x 125 mm - 05003591001 cn: EXTENSION cn2: EXTENSION cn_clear: EXTENSION d: Product description Wera Zyklop extension with flexible-lock: when activated the sockets are secured and permanently fixed, any unintentional loss being avoided. When the system is deactivated, the sockets can be quickly attached and exchanged. Equipped with a free-turning sleeve for faster turning of screws and nuts. 3/8" Zyklop "flexible-lock" extension with free-turning sleeve, short For 3/8" square sockets with ball lock Flexible lock system for either locking or rapid exchange of the attached tool With free-turning sleeve for rapid tightening and loosening of screws and nuts Chrome vanadium steel, matte chrome-plated Application 3/8" square drive sockets with ball lock Design Flexible-lock system either for permanent interlocking or fast change of accessories, free-turning sleeve for rapid tightening or loosening of screws and nuts, chrome vanadium, brushed chrome-plated finish Features and benefits The extensions from the premium lines are also equipped with the unique "flexible-lock-system". By activating this system, attachments can be fixed to the extension permanently - preventing slipping and any unintentional loss of the attachment. When the system is deactivated, the sockets can be attached as usual and changed in a flash. The free-turning sleeve on the Zyklop Speed and the Zyklop extension effectively accelerates the turning of screws and nuts. ds: dsc: Scope of delivery 8796 SB Zyklop "flexible-lock" extension with free-turning sleeve, short, 3/8", 3/8" x 125 mm kts: Zyklop "Flexible-Lock" extension with free-running sleeve, short for 3/8", 3/8" x 125 mm kpn: 8796 SB kpn_dash: kpn_clear: 8796SB bkpn: WERA 8796 SB bkpn_clear: WERA 8796SB c_path: Home / Tools / Hand tools / Sockets and ratchets / Accessories and spare parts / Extension | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera accessories and spare parts / Wera extension | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05003591001 sr_ns: WERA05003591001
r: 02763444 p: 8.099 pid: 4309 b: WERA q: 0 st: lt: 8 ean: 4013288016577 sr: WERA 05060278001 sr_no_br: 05060278001 sr_no_br_cl: 05060278001 sr_cl: WERA05060278001 sr_dash: sold: 194.376 p_range: none type: standard act: 1 avo: 1 av: Shank size 1/4 inch Socket size 8 mm Type of drive profile (socket) Hexagonal Shank type External hexagon Length 65 mm n: WERA 869/4 cap bit 8 x 65 mm - 05060278001 cn: NUT SETTER cn2: NUT SETTER cn_clear: NUTSETTER d: Product description Non-magnetic design. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Nutsetter for hexagon head screws Metric Non-magnetic design 1/4" hexagon drive Application Hexagon headed bolts, screws and nuts Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Non-magnetic Features and benefits Non-magnetic nutsetters that do not attract metal filings. ds: dsc: Scope of delivery 869/4 Nutsetters, 8 x 65 mm kts: cap bit 8 x 65 mm kpn: 869/4 kpn_dash: kpn_clear: 8694 bkpn: WERA 869/4 bkpn_clear: WERA 8694 c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Nut setter | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera nut setter sr_no_br_cl_ns: 05060278001 sr_ns: WERA05060278001
r: 02835721 p: 7.768 pid: 42037 b: WERA q: 0 st: lt: 9 ean: 4013288150196 sr: WERA 05345282001 sr_no_br: 05345282001 sr_no_br_cl: 05345282001 sr_cl: WERA05345282001 sr_dash: sold: 194.2 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Width across flats 1/4" With safety colour code 1000V ESD No Handle type Screwdriver handle Blade length 60 mm VDE approved No Product Range Wera Kraftform n: WERA 2069 kraftform micro cap screwdriver 1/4 x 60 mm - 05345282001 cn: NUT DRIVER cn2: NUT DRIVER cn_clear: NUTDRIVER d: Product description Premium Wera Micro insert wrench for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro nutsetter for hex head screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Anti-roll feature and rotating cap for rapid twisting E.g. for electricians, opticians, precision mechanics, jewellers or IT hardware fitters Application Hexagon headed bolts, screws and nuts Blade Round Design Chrome-plated Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (gray = external hexagon) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Indispensable for many users, including electronics technicians, opticians, precision engineers, jewellers, EDP hardware fitters and model-makers ds: dsc: Scope of delivery 2069 Nutdriver for electronic applications, 1/4" x 60 mm kts: kraftform micro cap screwdriver 1/4 x 60 mm kpn: 2069 kpn_dash: kpn_clear: 2069 bkpn: WERA 2069 bkpn_clear: WERA 2069 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Nut driver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera nut driver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05345282001 sr_ns: WERA05345282001
r: 87010212 p: 8.429 pid: 76200 b: WERA q: 7 st: 1 lt: 1 ean: 4013288017079 sr: WERA 05050215001 sr_no_br: 05050215001 sr_no_br_cl: 05050215001 sr_cl: WERA05050215001 sr_dash: sold: 193.867 p_range: none type: standard act: 1 avo: 1 av: Drive profile size 3/8" Type of drive profile External square Connection size 1/4" Connection profile External hexagon Length 50 mm n: WERA 870/4 adapter 3/8" x 50 mm - 05050215001 cn: SOCKET ADAPTOR cn2: SOCKET ADAPTOR cn_clear: SOCKETADAPTOR d: Product description Tool shaft (adaptor) for power tool sockets with hexagon head drive by Wera. Drive: 1/4" hexagonal. Adaptor for machine-operated nut spinner sockets 1/4" external square 1/4" hexagon drive (Wera connecting series 4) Application Machine-operated nut spinner sockets Design With external square drive Drive 1/4" hexagon, suitable for power tools with DIN ISO 1173-F 6,3 receiver Features and benefits With locking pin; for machine-operated nut spinner sockets ds: dsc: Scope of delivery 870/4 Adaptor, machine-operated nut spinner sockets, 3/8" x 50 mm kts: adapter 3/8" x 50 mm kpn: 870/4 kpn_dash: kpn_clear: 8704 bkpn: WERA 870/4 bkpn_clear: WERA 8704 c_path: Home / Tools / Hand tools / Sockets and ratchets / Accessories and spare parts / Socket adaptor | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera accessories and spare parts / Wera socket adaptor sr_no_br_cl_ns: 05050215001 sr_ns: WERA05050215001
r: 87010143 p: 6.89 pid: 72164 b: WERA q: 0 st: lt: 11 ean: 4013288011527 sr: WERA 05059472001 sr_no_br: 05059472001 sr_no_br_cl: 05059472001 sr_cl: WERA05059472001 sr_dash: sold: 192.92 p_range: none type: standard act: 1 avo: 1 av: Length 70 mm Blade thickness 0,6 mm Type of drive profile (bit) Slotted Connection size (bit) 1/4" VDE approved No Bit tip Slotted 3,5 mm Drive profile size (bit) 3,5 mm n: WERA 800/4 Z slotted screw bit, 0.6 x 3.5 x 70 mm - 05059472001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for slotted screws, for universal use. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For slotted screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Slotted screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 800/4 Z bits, 0.6 x 3.5 x 70 mm kts: slotted screw bit, 0.6 x 3.5 x 70 mm kpn: 800/4 Z kpn_dash: kpn_clear: 8004Z bkpn: WERA 800/4 Z bkpn_clear: WERA 8004Z c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059472001 sr_ns: WERA05059472001
