r: 02833289 p: 28.884 pid: 41866 b: WERA q: 0 st: lt: 12 ean: 4013288030160 sr: WERA 05073391001 sr_no_br: 05073391001 sr_no_br_cl: 05073391001 sr_cl: WERA05073391001 sr_dash: sold: 173.304 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Min. width across flats 1,5 mm With ball head Yes Quantity per set 9 Product Range Wera Hex-Plus n: WERA 950/9 Hex-Plus 1 SB SiS socket wrench set metric chrome plated 9-piece - 05073391001 cn: HEX KEY SET cn2: HEX KEY SET cn_clear: HEXKEYSET d: Product description High quality L-key set for hexagonal socket screws in a practical clip fastener out of wear-resistant material, enabling secure storage of the L-keys as well as simple removal. L-keys with Hex-Plus profile: offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The precise chrome-plated design ensures high corrosion protection. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer High corrosion protection thanks to chrome-plating L-keys are quickly to hand thanks to their size markings Wear-resistant clip material for enhanced durability 9-piece set in a two-component clip Application Hexagon socket screws Design Chrome-plated Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. Chrome-plated hexagon L-keys for outstanding surface protection and long service life. High corrosion protection. The wear-resistant clip material ensures that the L-keys are securely held yet are easy to remove. ds: dsc: Scope of delivery 950/9 Hex-Plus 1 SB L-key set, metric, chrome-plated, 9 pieces 9x 950 PKL L-key, metric, chrome-plated: 1.5x90 mm, 2x100 mm, 2.5x112 mm, 3x126 mm, 4x140 mm, 5x160 mm, 6x180 mm, 8x200 mm, 10x219 mm kts: socket wrench set metric chrome plated 9-piece kpn: 950/9 Hex-Plus 1 SB SiS kpn_dash: 950/9 Hex kpn_clear: 9509HexPlus1SBSiS bkpn: WERA 950/9 Hex-Plus 1 SB SiS bkpn_clear: WERA 9509HexPlus1SBSiS c_path: Home / Tools / Hand tools / Keys / Sets / Hex key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera hex key set | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05073391001 sr_ns: WERA05073391001
r: 08103768 p: 43.305 pid: 72196 b: WERA q: 0 st: lt: 8 ean: 4013288229366 sr: WERA 05020172001 sr_no_br: 05020172001 sr_no_br_cl: 05020172001 sr_cl: WERA05020172001 sr_dash: sold: 173.22 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 19 - 24 mm Connection size (wrench) 14 x 18 mm Connection type (wrench) Outer rectangle Product Range Wera Joker n: WERA 7880 Joker XL self-adjusting insert spanner for spanner size 19-24 mm, 14 x 18 mm - 05020172001 cn: INTERCHANGEABLE OPEN-ENDED SPANNER cn2: INTERCHANGEABLE OPEN-ENDED SPANNER cn_clear: INTERCHANGEABLEOPENENDEDSPANNER d: Product description Self-setting insert spanner, for hexagon screw heads and bolts, for torque wrenches from the Click-Torque X and XP series with 14x18 mm mounting. Covers all metric and imperial dimensions in the respective field of application. With its continuous and parallel jaws, the tool replaces several single spanner sizes. The required size is automatically and continuously set when attaching the tool to the hexagon bolt or screw. The integrated lever mechanism securely clamps the hexagon screw or bolt between the jaws, which significantly reduces the risk of slippage or damage. The ratchet feature ensures fast and consistent screwdriving without removing the tool. By using the corner-width rectangular prisms, a return angle of only 30° can be achieved. Square head insert tool 14x18 mm For torque wrenches from the Click-Torque X series with 14x18 mm mounting For hexagon screw heads and bolts with wrench sizes 19.0; 20.0; 21.0; 22.0; 24.0 (metric) For hexagon screw heads and bolts with wrench sizes 3/4"; 25/32"; 13/16"; 7/8"; 15/16" (imperial) Automatically and continuously gripping hexagonal screws and bolts Application Hexagonal screw heads and bolts Drive 14x18 mm; for torque wrenches of the Click-Torque X and XP series with 14x18 mm mounting Design Self-setting spanner with ratchet functionality; open end adjustable in size, parallel smooth jaws; with 30° return angle via the corner-width prisms in the jaw Features and benefits The laser-engraved, abrasion-proof QR code makes it easier to determine the correct torque value depending on the torque wrench and insert tool used. Simply scan with your smartphone or tablet (if available, both QR codes: torque wrench and insert tool). A website opens automatically which recognizes the scanned tools (no app needed!). Then enter the required torque value; the corrected value is determined automatically. No need to use formulas/calculations. For torque wrenches from the Click-Torque X series with 14x18 mm mounting. With its automatically and continuously gripping parallel jaws, the 7880 Joker covers all dimensions within the potential operative range. The tool finds the required size by itself when attaching it to the bolt or screw. The parallel, smooth jaws of the 7880 Joker offer a seating stress and can thus prevent the nut or screw head from rounding, which can occur when power is transmitted over corners. The ratchet feature in the jaw ensures fast and consistent screwdriving without removing the tool. The corner-width rectangular prisms in the jaw allow a return angle of only 30°. Safe working and rapid tool change thanks to the pin lock of the insert tools. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. ds: dsc: Scope of delivery 7880 Joker XL Self-setting insert spanner for wrench sizes 19-24 mm, 14x18mm, 14x18 x 19-24 x 3/4-15/16" x 95 mm kts: self-adjusting insert spanner for spanner size 19-24 mm, 14 x 18 mm kpn: 7880 Joker XL kpn_dash: kpn_clear: 7880JokerXL bkpn: WERA 7880 Joker XL bkpn_clear: WERA 7880JokerXL c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable open-ended spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020172001 sr_ns: WERA05020172001
r: 02865720 p: 57.685 pid: 31093 b: WERA q: 0 st: lt: 12 ean: 4013288196347 sr: WERA 05078635001 sr_no_br: 05078635001 sr_no_br_cl: 05078635001 sr_cl: WERA05078635001 sr_dash: sold: 173.055 p_range: none type: standard act: 1 avo: 1 av: Drive profile size 1/4" Type of drive profile External square Connection size 9 x 12 mm Connection profile Outer rectangle n: WERA 7772 A plug-in ratchet switchable, 9x12 mm, 49 mm x 1/4" - 05078635001 cn: RATCHET HEAD cn2: RATCHET HEAD cn_clear: RATCHETHEAD d: Product description Ratchet insert, reversible, for 1/4" square socket wrench inserts and 1/4" connecting parts with square drive; for torque wrenches of the Click-Torque X series with 9x12 mm holder. For torque wrenches from the Click-Torque X series with 9x12 mm mounting For 1/4" square socket wrench inserts and 1/4" connecting parts with square drive Fine toothing with 72 teeth Easy switching by knob Socket lock by push button Application For 1/4" square socket wrench inserts and 1/4" connecting parts with square drive Drive 9x12 mm; for torque wrenches of the Click-Torque X and XP series with 9x12 mm holder Design With reversing ratchet, push-button release, forged, chrome-vanadium steel, matt chrome-plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 9x12 mm mounting. Fine-pitched with 72 teeth for a return angle of only 5° For 1/4" square socket wrench inserts and 1/4" connecting parts with square drive. Easy switching by knob. Safe socket lock via push button The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. ds: dsc: Scope of delivery 7772 A Ratchet insert, reversible, 9x12 mm, 9x12 x 1/4" x 48.6 mm kts: plug-in ratchet switchable, 9x12 mm, 49 mm x 1/4" kpn: 7772 A kpn_dash: kpn_clear: 7772A bkpn: WERA 7772 A bkpn_clear: WERA 7772A c_path: Home / Tools / Hand tools / Sockets and ratchets / Ratchets / Ratchet head | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera ratchets / Wera ratchet head sr_no_br_cl_ns: 05078635001 sr_ns: WERA05078635001
r: 03177019 p: 11.528 pid: 31375 b: WERA q: 0 st: lt: 13 ean: 4013288219497 sr: WERA 05030331001 sr_no_br: 05030331001 sr_no_br_cl: 05030331001 sr_cl: WERA05030331001 sr_dash: sold: 172.92 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size PL1 Blade length 40 mm Blade thickness ESD Yes Non-sparking No VDE approved No With safety colour code 1000V Drive type Pentalobe Product Range Wera Kraftform n: WERA 1573 Pentalobe ESD Kraftform Micro screwdriver, PL 1.4 x 40 mm - 05030331001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description ESD-safe Micro screwdriver. Dependable protection against electrostatic energy and associated damage. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Power zones with integrated soft sections ensure the transfer of high loosening and tightening torque; a precision zone for the right rotation angle during fine adjustment work. The Black Point tip offers optimised corrosion protection and an exact fit. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. Kraftform Micro screwdriver for Pentalobe screws ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Multi-component Kraftform Micro handle for fast and ergonomic screwdriving The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Application Pentalobe screws Blade Round Design Nicromatt, Black Point tip Handle Kraftform Micro with anti-roll protection and rotating cap, multi-component. With tool finder Take it easy: colour coding by profile (purple = Pentalobe) and size stamping. Features and benefits The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Multi-component screwdriver handle for ergonomic working. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 1573 Pentalobe ESD Kraftform Micro screwdriver, PL 1.4 x 40 mm kts: Kraftform Micro screwdriver, PL 1.4 x 40 mm kpn: 1573 Pentalobe ESD kpn_dash: kpn_clear: 1573PentalobeESD bkpn: WERA 1573 Pentalobe ESD bkpn_clear: WERA 1573PentalobeESD c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05030331001 sr_ns: WERA05030331001
r: 87010034 p: 4.43 pid: 72827 b: WERA q: 8 st: 1 lt: 1 ean: 4013288011190 sr: WERA 05056240001 sr_no_br: 05056240001 sr_no_br_cl: 05056240001 sr_cl: WERA05056240001 sr_dash: sold: 172.77 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Blade thickness 1,6 mm Type of drive profile (bit) Slotted Connection size (bit) 1/4" VDE approved No Bit tip Slotted 8 mm Drive profile size (bit) 8 mm n: WERA 800/1 TZ slotted screw bit, 1.6 x 8 x 25 mm - 05056240001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Bits for slotted screws with torsion zone against premature wear. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For slotted screws Torsion design against premature wear Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Slotted screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Torsion-style design to reduce premature wear, tough, for universal use Features and benefits TZ-Bits are tough bits with a torsion zone. Torsion bits absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 800/1 TZ bits, 1.6 x 8 x 25 mm kts: slotted screw bit, 1.6 x 8 x 25 mm kpn: 800/1 TZ kpn_dash: kpn_clear: 8001TZ bkpn: WERA 800/1 TZ bkpn_clear: WERA 8001TZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05056240001 sr_ns: WERA05056240001
r: 02829034 p: 57.19 pid: 42742 b: WERA q: 0 st: lt: 8 ean: 4013288138569 sr: WERA 05072452001 sr_no_br: 05072452001 sr_no_br_cl: 05072452001 sr_cl: WERA05072452001 sr_dash: sold: 171.57 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 40 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T40 Quantity per box 100 n: WERA 867/1 TORX DIY 100 SiS bits, TX 40 x 25 mm (100 pcs) - 05072452001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX® screws. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For recessed TORX® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design For universal use Features and benefits ds: dsc: Scope of delivery 867/1 TORX® DIY 100, TX 40 x 25 mm, 100 pieces 100x 867/1 TORX® bits: TX 40 x 25 mm kts: bits, TX 40 x 25 mm (100 pcs) kpn: 867/1 TORX DIY 100 SiS kpn_dash: kpn_clear: 8671TORXDIY100SiS bkpn: WERA 867/1 TORX DIY 100 SiS bkpn_clear: WERA 8671TORXDIY100SiS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05072452001 sr_ns: WERA05072452001
r: 02823059 p: 6.12 pid: 46805 b: WERA q: 0 st: lt: 16 ean: 4013288034342 sr: WERA 05059912001 sr_no_br: 05059912001 sr_no_br_cl: 05059912001 sr_cl: WERA05059912001 sr_dash: sold: 171.36 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ2 n: WERA 855/4 BTH PZ bit Pozidriv, PZ 2 x 50 mm - 05059912001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Torsion bits for Pozidriv screws with Torsion zone where kinetic energy is diverted from peak loads. This greatly extends the product service life. This provides the best possible durability together with the matching holder. Extra-hard; 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Suitable for Pozidriv screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Particularly hard for semi-hard materials 1/4" hexagon drive (Wera connecting series 4) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design BiTorsion for long service life, extra-hard. Take it easy tool finder: Output colour coding (black = Pozidriv) and large stamp to enable the desired bit to be easily located. Features and benefits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. With BiTorsion zone to cushion peak loads. ds: dsc: Scope of delivery 855/4 BTH bits, PZ 2 x 50 mm kts: bit Pozidriv, PZ 2 x 50 mm kpn: 855/4 BTH PZ kpn_dash: kpn_clear: 8554BTHPZ bkpn: WERA 855/4 BTH PZ bkpn_clear: WERA 8554BTHPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059912001 sr_ns: WERA05059912001
r: 02829011 p: 11.404 pid: 42618 b: WERA q: 0 st: lt: 8 ean: 4013288172631 sr: WERA 05671388001 sr_no_br: 05671388001 sr_no_br_cl: 05671388001 sr_cl: WERA05671388001 sr_dash: sold: 171.06 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Accessory/Part type Case For Kraftform Kompakt (18 pieces) Product Range Wera Kraftform Kompakt n: WERA 9457 folding case for Kraftform Kompakt VDE sets with max. 18 parts, empty, 180 x 85 mm - 05671388001 cn: ACCESSORY/PART SCREWING cn2: ACCESSORY/PART SCREWING cn_clear: ACCESSORYPARTSCREWING d: Product description Empty folding pocket for up to 18-part Kraftform Compact VDE sets Robust pouch with strong hook and loop fastener system With 3D product labelling Suitable for docking with the Wera 2go system. Features and benefits ds: dsc: Scope of delivery 9457 Folding pouch for 18-piece Kraftform Kompakt VDE sets, empty, 180 x 85 mm kts: folding case for Kraftform Kompakt VDE sets with max. 18 parts, empty, 180 x 85 mm kpn: 9457 kpn_dash: kpn_clear: 9457 bkpn: WERA 9457 bkpn_clear: WERA 9457 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Accessory/part screwing | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera accessory/part screwing | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05671388001 sr_ns: WERA05671388001
r: 08103762 p: 56.983 pid: 70364 b: WERA q: 0 st: lt: 13 ean: 4013288230669 sr: WERA 05075810001 sr_no_br: 05075810001 sr_no_br_cl: 05075810001 sr_cl: WERA05075810001 sr_dash: sold: 170.949 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 1 Nm Max. tightening torque 3 Nm Drive size HEX 1/4" ESD No VDE approved No With safety colour code 1000V Product Range Wera Kraftform n: WERA 7510 Kraftform Safe-Torque Speed torque screwdriver 45352 Nm, 1/4" - 05075810001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description For professional screwdriving/fine adjustment AND for torque-controlled screwdriving. Secure slip-over torque mechanism with quick setting for five selectable clockwise/counterclockwise tightening torques (1.0; 1.5; 2.0; 2.5; 3.0 Nm) and one fixed position (Torque Lock) for unlimited loosening and tightening moments. Quick-release holder for high robustness. Suitable for bits with 1/4" external hexagon drive. Torque screwdriver with quick torque adjustment Easy and quick torque setting Fixed position (Torque Lock) for unlimited tightening and loosening moments Secure slip-over torque function for clockwise/anti-clockwise torque-control Quick and easy setting of the selectable tightening torques (1.0; 1.5; 2.0; 2.5; 3.0 Nm) Application Suitable for bits with 1/4" external hexagon drive Design Five selectable maximum tightening torques and one fixed position; bit mounting with ±10 % precision. Digital torque value display. Reliable signal when the set torque is reached. Handle Kraftform, multi-component Features and benefits Torque screwdriver with quick torque adjustment Five selectable tightening torques (1.0; 1.5; 2.0; 2.5; 3.0 Nm) and one fixed position (Torque Lock) for unlimited tightening and loosening moments. Rapid setting of the selectable tightening torques. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. ds: dsc: Scope of delivery 7510 Kraftform Safe-Torque Speed Torque screwdriver, 1-3 Nm, 1/4" x 1.0 Nm x 1.5 Nm x 2.0 Nm x 2.5 Nm x 3.0 Nm x 147.5 mm kts: torque screwdriver 45352 Nm, 1/4" kpn: 7510 Kraftform Safe-Torque Speed kpn_dash: 7510 Kraftform Safe kpn_clear: 7510KraftformSafeTorqueSpeed bkpn: WERA 7510 Kraftform Safe-Torque Speed bkpn_clear: WERA 7510KraftformSafeTorqueSpeed c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05075810001 sr_ns: WERA05075810001
r: 02142118 p: 15.537 pid: 44168 b: WERA q: 0 st: lt: 14 ean: 4013288160287 sr: WERA 05006466001 sr_no_br: 05006466001 sr_no_br_cl: 05006466001 sr_cl: WERA05006466001 sr_dash: sold: 170.907 p_range: none type: standard act: 1 avo: 1 av: Drive size PZ/S 1 Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No Drive type Pozidriv/Slotted n: WERA 165 iS PZ/S VDE insulated screwdriver for PlusMinus screws, reduced-diameter blade, square 2 x 100 mm - 05006466001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera VDE screwdriver with multi-component Kraftform Plus handle for fast and smooth work: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. Combination profile slotted and Pozidriv*, especially for use with terminal strips, fuse boxes, switches, relays. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Reduced shaft diameter: combination profile - Pozidriv/slotted Application For PlusMinus screws (Pozidriv/slotted) Blade Reduced blade diameter with integrated protective insulation, allows sunken PlusMinus screws to be accessed and actuated, individually tested as per IEC 60900 Design PlusMinus (Pozidriv/slotted), blade zinc-phosphated Handle Kraftform with non-roll feature, multi-component Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 165 iS PZ/S VDE Insulated screwdriver with reduced blade diameter for PlusMinus screws (Pozidriv/slotted), # 2 x 100 mm kts: VDE insulated screwdriver for PlusMinus screws, reduced-diameter blade, square 2 x 100 mm kpn: 165 iS PZ/S kpn_dash: kpn_clear: 165iSPZS bkpn: WERA 165 iS PZ/S bkpn_clear: WERA 165iSPZS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05006466001 sr_ns: WERA05006466001
r: 03229208 p: 21.322 pid: 71004 b: WERA q: 0 st: lt: 8 ean: 4013288187970 sr: WERA 05057761001 sr_no_br: 05057761001 sr_no_br_cl: 05057761001 sr_cl: WERA05057761001 sr_dash: sold: 170.576 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ2 Quantity per box 20 n: WERA Bit-Box 20 BTZ PZ Bit-Box 20 BTZ PZ, PZ 2 x 25 mm (20 pcs) - 05057761001 cn: BIT cn2: BIT cn_clear: BIT d: Product description BiTorsion Bits for Pozidriv screws in a practical Bit-Box. Come with a torsion zone where kinetic energy is diverted to when peak loads prevail: this significantly prolongs the product service life; with Take it easy tool finder: colour coding according to profile and size stamp; extra hard design; 1/4" hex, suitable for holders as per DIN ISO 1173-D 6.3. Suitable for Pozidriv screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design BiTorsion for long service life, extra-tough, for universal use. Take it easy tool finder: Output colour coding (black = Pozidriv) and large stamp to enable the desired bit to be easily located. Features and benefits BTZ-Bits The slide switch allows a simple and gradual removal and reinsertion of the bits. The transparent reverse side means that it is easy to know how many bits are still in the box. Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. ds: dsc: Scope of delivery Bit-Box 20 BTZ PZ, PZ 2 x 25 mm, 20 pieces 20x 855/1 BTZ bits: PZ 2 x 25 mm kts: Bit-Box 20 BTZ PZ, PZ 2 x 25 mm (20 pcs) kpn: Bit-Box 20 BTZ PZ kpn_dash: Bit kpn_clear: BitBox20BTZPZ bkpn: WERA Bit-Box 20 BTZ PZ bkpn_clear: WERA BitBox20BTZPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05057761001 sr_ns: WERA05057761001
r: 02688547 p: 18.842 pid: 44763 b: WERA q: 1 st: 1 lt: 1 ean: 4013288167316 sr: WERA 05073271001 sr_no_br: 05073271001 sr_no_br_cl: 05073271001 sr_cl: WERA05073271001 sr_dash: sold: 169.578 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 11 mm Overall length 165 mm Type of drive profile Twelve-point Product Range Wera Joker n: WERA 6000 Joker socket and ring spanner, 11 x 165 mm - 05073271001 cn: RATCHETING COMBINATION SPANNER cn2: RATCHETING COMBINATION SPANNER cn_clear: RATCHETINGCOMBINATIONSPANNER d: Product description Premium metric ring ratchet spanner by Wera: Everything a wrench can do and so much more. Faster, better, more beautiful. A real Joker. The new generation of ring ratchet spanners. For hexagon screw heads and bolts. With holding function enabled by a metal plate in the mouth, which reduces the risk of losing screws and sockets. With its extra hard teeth, the exchangeable metal plate in the mouth secures screws and sockets and reduces the risk of slipping. The integrated end stop can prevent the screw head from slipping down and allows application of high torques. The double hexagon geometry ensures a positive connection with the screw or bolt and thus reduces the risk of slipping. A return angle of only 30° at the jaw end avoids time-consuming rotating of the tool whilst screwdriving. Ratchet mechanism at the ring side with exceptionally high fine toothing of 80 teeth for flexibility even in confined spaces. The specially engineered geometry allows high torque transmission and high bending stiffness. Made of high-performance chromium molybdenum steel with nickel-chromium coating for high corrosion protection. With Take it easy tool finder: colour coding by size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping The double-hex geometry reduces the risk of slipping Return angle of only 30° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench Features and benefits The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined working spaces. When we began to think about open-ended wrenches, we asked ourselves: why does the wrench always have to be flipped over; why does it have an offset design; why does it slip off injuring fingers? The new design of the open end resulted in a real "Joker" that works even when all other trumps have been played. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6000 Joker Ratcheting combination wrenches, 11 x 165 mm kts: socket and ring spanner, 11 x 165 mm kpn: 6000 Joker kpn_dash: kpn_clear: 6000Joker bkpn: WERA 6000 Joker bkpn_clear: WERA 6000Joker c_path: Home / Tools / Hand tools / Keys / Keys / Ratcheting combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratcheting combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05073271001 sr_ns: WERA05073271001
r: 03226464 p: 18.842 pid: 70163 b: WERA q: 0 st: lt: 9 ean: 4013288214096 sr: WERA 05008872001 sr_no_br: 05008872001 sr_no_br_cl: 05008872001 sr_cl: WERA05008872001 sr_dash: sold: 169.578 p_range: none type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Quantity per set 5 n: WERA Stubby Set 3 screwdriver set 5-piece - 05008872001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description Especially small screwdrivers with short blades for hard to reach areas. The 2-component Kraftform handle with its practical combination of hard and soft zones allows for a firm grip and precise working. The blades have all the benefits of the Wera Bit technology. Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head. The hexagon anti-roll protection prevents annoying rolling away of bits in the workplace. Short compact shape for working in confined spaces Ergonomic 2-component Kraftform handle for precise work Blades with the benefits of the Wera Bit technology Hexagonal anti-roll feature against rolling away Take it easy tool finder: colour coding according to profile and size With Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted, Phillips and square socket screws Design 5-piece set in display carton Features and benefits With its compact handle shape and the short blade, the Kraftform Stubbies are particularly suitable for working in confined screwdriving situations. The 2-component Kraftform handle allows high power transmission due to the non-slip, softer grip areas and high working speeds due to the hard grip areas, which allow a quick hand switch. The special surface treatment of the blades sees to a high level of corrosion protection and optimum fitting accuracy of the screw. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery Stubby Set 3 Screwdriver set, 5 pieces 2x 350 PH Phillips-head Stubby/carburetor screwdriver: PH 1x25 mm, PH 2x25 mm 1x 335 Stubby/carburetor screwdriver: 1 x 5.5 x 24.5 mm 2x 368 Stubby screwdriver for square head socket screws: # 1x25 mm, # 2x25 mm kts: screwdriver set 5-piece kpn: Stubby Set 3 kpn_dash: kpn_clear: StubbySet3 bkpn: WERA Stubby Set 3 bkpn_clear: WERA StubbySet3 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set sr_no_br_cl_ns: 05008872001 sr_ns: WERA05008872001
r: 41070310 p: 6.776 pid: 71697 b: WERA q: 1 st: 1 lt: 1 ean: 4013288003331 sr: WERA 05110007001 sr_no_br: 05110007001 sr_no_br_cl: 05110007001 sr_cl: WERA05110007001 sr_dash: sold: 169.4 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 5,5 mm Blade length 125 mm Blade thickness 1 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted n: WERA 335 saw blade screwdriver, electrician blade, 1 x 5.5 x 125 mm - 05110007001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver with electrician's blade. Multi-component Kraftform Plus handle for comfortable ergonomic screwdriving, which avoids blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface "bites" into the screw head and unintentional slipping is a thing of the past. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Slotted screwdriver -electrician's blade Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Application Slotted screws Blade Round Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. ds: dsc: Scope of delivery 335 Screwdriver for slotted screws, 1 x 5.5 x 125 mm kts: saw blade screwdriver, electrician blade, 1 x 5.5 x 125 mm kpn: 335 kpn_dash: kpn_clear: 335 bkpn: WERA 335 bkpn_clear: WERA 335 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05110007001 sr_ns: WERA05110007001
r: 87990872 p: 3.17 pid: 71036 b: WERA q: 63 st: 1 lt: 1 ean: 4013288015587 sr: WERA 05056938001 sr_no_br: 05056938001 sr_no_br_cl: 05056938001 sr_cl: WERA05056938001 sr_dash: sold: 168.01 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ2 n: WERA 856/1 TZ ACR PZ bit Pozidriv, PZ 2 x 25 mm - 05056938001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits with Torsion zone: where kinetic energy is diverted from peak loads. This greatly extends the product service life. Come with rough ribs (anti cam-out feature, ACR®). Tough viscous, for universal use; 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Suitable for Pozidriv screws ACR® (anti cam-out feature) to prevent any slipping out of the screw head Torsion zone for absorption of peak loads Enhanced service life of the bits Tough for hard materials Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Torsion-style design to reduce premature wear, tough, for universal use, ACR® (Anti Cam-Out Ribs) prevents bits from slipping out of screw head Features and benefits ACR® stands for "anti-cam-out ribs". ACR® bits have ribs at the drive tip that protect against slipping out of the screw head. It is recommended that ACR® bits are matched with ribbed ACR® screws for maximum effect. ACR® is a registered trademark of Phillips Screw Company. TZ-Bits are tough viscous bits with a torsion zone. Torsion bits absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. ds: dsc: Scope of delivery 856/1 TZ ACR® bits, PZ 2 x 25 mm kts: bit Pozidriv, PZ 2 x 25 mm kpn: 856/1 TZ ACR PZ kpn_dash: kpn_clear: 8561TZACRPZ bkpn: WERA 856/1 TZ ACR PZ bkpn_clear: WERA 8561TZACRPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05056938001 sr_ns: WERA05056938001
r: 02831987 p: 11.2 pid: 42880 b: WERA q: 0 st: lt: 8 ean: 4013288029614 sr: WERA 05073344001 sr_no_br: 05073344001 sr_no_br_cl: 05073344001 sr_cl: WERA05073344001 sr_dash: sold: 168 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 1/4" Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 1/4" Quantity per blister 1 n: WERA 840/1 Z Set SB SiS 840/1 Z Set SB (3 pcs) - 05073344001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough viscous Wera bits for hexagon socket screws in a practical 3-piece set, for universal use. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3 In a practical 3-piece set Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/1 Z Sets SB, 3 pieces 3x 840/1 Z bits: 4x25 mm, 5x25 mm, 6x25 mm kts: 840/1 Z Set SB (3 pcs) kpn: 840/1 Z Set SB SiS kpn_dash: kpn_clear: 8401ZSetSBSiS bkpn: WERA 840/1 Z Set SB SiS bkpn_clear: WERA 8401ZSetSBSiS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073344001 sr_ns: WERA05073344001
r: 87010084 p: 2.79 pid: 70713 b: WERA q: 38 st: 1 lt: 1 ean: 4013288015808 sr: WERA 05066315001 sr_no_br: 05066315001 sr_no_br_cl: 05066315001 sr_cl: WERA05066315001 sr_dash: sold: 167.4 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 30 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T30 n: WERA 867/1 TZ TORX bit, TX 30 x 25 mm - 05066315001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For recessed TORX® screws Torsion design against premature wear Prevents premature breakage of the drive tip Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Torsion-style design to reduce premature wear, tough, for universal use Features and benefits TZ-Bits are tough bits with a torsion zone. Torsion bits absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/1 TZ TORX® bits, TX 30 x 25 mm kts: bit, TX 30 x 25 mm kpn: 867/1 TZ TORX kpn_dash: kpn_clear: 8671TZTORX bkpn: WERA 867/1 TZ TORX bkpn_clear: WERA 8671TZTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066315001 sr_ns: WERA05066315001
r: 08131749 p: 55.702 pid: 173529 b: WERA q: 2 st: 1 lt: 1 ean: 4013288233295 sr: WERA 05020331001 sr_no_br: 05020331001 sr_no_br_cl: 05020331001 sr_cl: WERA05020331001 sr_dash: sold: 167.106 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 1 12,4 mm Width across flats 2 14 mm Length 239,4 mm Non-sparking No VDE approved No With safety colour code 1000V Product Range Wera Joker n: WERA 6006 Joker M/L self-adjusting double open-end spanner - 05020331001 cn: OPEN-ENDED SPANNER cn2: OPEN-ENDED SPANNER cn_clear: OPENENDEDSPANNER d: Product description Self-setting double spanner for hexagon screw heads and bolts with wrench sizes 13-16 and 16-19 (metric) or 1/2"-5/8" and 5/8"-3/4" and 7/16"-8/16" (imperial). With its continuous and parallel jaws, the tool replaces several single spanner sizes. The required size is automatically and continuously set when attaching the tool to the hexagon bolt or screw. The integrated lever mechanism securely clamps the hexagon screw or bolt between the jaws, which significantly reduces the risk of slippage or damage. The ratchet feature ensures fast and consistent screwdriving without removing the tool. By using the corner-width rectangular prisms, a return angle of only 30° can be achieved. Ratchet feature and corner-width prism make it possible to work even in confined spaces. The adjustable Joker 6006 double spanner with ratchet functionality is the universal screwdriving tool. Self-setting. Gripping. Spanning. Self-setting double spanner For hexagon screw heads and bolts with wrench sizes 13.0; 14.0; 15.0; 16.0; 17.0; 18.0; 19.0 (metric) For hexagon screw heads and bolts with wrench sizes 1/4"; 5/16"; 3/8"; 7/16"; 1/2"; 17/32"; 9/16"; 19/32"; 5/8"; 11/16"; 3/4" (imperial) Automatically and continuously gripping hexagon screws and bolts Lever mechanism upon gripping prevents slipping and damage Application Hexagon screw heads and bolts with wrench sizes 13,0; 14,0; 15,0; 16,0 and 16,0; 17,0; 18,0; 19,0 (metric) resp. 1/2"; 17/32"; 9/16", 19/32"; 5/8" and 5/8"; 11/16"; 3/4" (imperial) Design Self-setting double spanner with ratchet functionality; jaws adjustable in size, parallel smooth jaws; with 30° return angle via the corner-width prisms in the jaw Features and benefits The self-setting Joker 6006 double spanners cover all metric and imperial dimensions in the respective field of application With its automatically and continuously gripping parallel jaws, the Joker 6006 double spanner covers all dimensions within the potential operative range. The tool finds the required size by itself when attaching it to the bolt or screw. The parallel, smooth jaws of the Joker 6006 double spanner offer a seating stress and can thus prevent the nut or screw head from rounding, which can occur when power is transmitted over corners. The ratchet functionality in both jaws of the double spanner ensures fast and consistent screwdriving without removing the tool. Thanks to the corner-width rectangular prisms in both jaws of the double spanner, a return angle of only 30° can be achieved. ds: dsc: Scope of delivery 6006 Joker M/L Self-setting double spanner, 13; 14; 15; 16 x 1/2; 17/32; 9/16; 19/32; 5/8" x 16; 17; 18; 19 x 5/8; 11/16; 3/4" x 239.4 mm kts: self-adjusting double open-end spanner kpn: 6006 Joker M/L kpn_dash: kpn_clear: 6006JokerML bkpn: WERA 6006 Joker M/L bkpn_clear: WERA 6006JokerML c_path: Home / Tools / Hand tools / Keys / Keys / Open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera open-ended spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020331001 sr_ns: WERA05020331001
r: 02612961 p: 16.694 pid: 4073 b: WERA q: 0 st: lt: 8 ean: 4013288118158 sr: WERA 05071225001 sr_no_br: 05071225001 sr_no_br_cl: 05071225001 sr_cl: WERA05071225001 sr_dash: sold: 166.94 p_range: none type: standard act: 1 avo: 1 av: Shank size 1/4 inch Socket size 13 mm Type of drive profile (socket) Hexagonal Shank type External hex Length 50 mm n: WERA 3869/4 stainless steel cap bit 13 x 50 mm - 05071225001 cn: NUT SETTER cn2: NUT SETTER cn_clear: NUTSETTER d: Product description High quality nutsetter out of stainless steel for hexagon head screws. Stainless to prevent the risk of extraneous rust. Non-magnetic design with retaining spring. 1/4" hexagon, suitable for holders as per, DIN ISO 1173-F 6.3. Solution to the extraneous rust problem: fasten stainless screws with stainless tools Nutsetter for hexagon head screws Non-magnetic, with retaining spring, stainless steel against extraneous rust 1/4" hexagon drive (Wera connecting series 4) Application Hexagon headed bolts, screws and nuts Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Non-magnetic, retaining spring, stainless steel for minimising rust Features and benefits Stainless steel has the property of not rusting. However, if tools made out of conventional steel are used for stainless steel components or screws, the particles left behind from these tools can adhere to the surface and then rust. This effect - known as extraneous rust - can impair the visual appearance and even cause structural damage that may result in expensive repair work. The wear particles that cause this rust effect can be prevented by using stainless steel tools. Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. ds: dsc: Scope of delivery 3869/4 Nutsetters, stainless, 13 x 50 mm kts: stainless steel cap bit 13 x 50 mm kpn: 3869/4 kpn_dash: kpn_clear: 38694 bkpn: WERA 3869/4 bkpn_clear: WERA 38694 c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Nut setter | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera nut setter sr_no_br_cl_ns: 05071225001 sr_ns: WERA05071225001
r: 08131707 p: 166.611 pid: 173497 b: WERA q: 0 st: lt: 8 ean: 4013288233646 sr: WERA 05075693001 sr_no_br: 05075693001 sr_no_br_cl: 05075693001 sr_cl: WERA05075693001 sr_dash: sold: 166.611 p_range: KLIUM_PRODUCT_RANGE_305 type: standard act: 1 avo: 1 av: Min. tightening torque 2,5 Nm Drive profile size 1/4" VDE approved No With safety colour code 1000V ESD No Display Analog Adjustable torque range 2,5-25 Nm Max. tightening torque 25 Nm Product Range Wera Click-Torque Lock n: WERA Click-Torque Lock A 5 R/L torque spanner, adjustable, Torque Lock function, 1/4" square-through square, clockwise and anticlockwise tightening, 2.5-25 Nm - 05075693001 cn: TORQUE WRENCH cn2: TORQUE WRENCH cn_clear: TORQUEWRENCH d: Product description Adjustable torque wrench for controlled clockwise and counterclockwise torque operation. With 1/4" square head drive. The torque function can be deactivated (Torque Lock function), so that the tool can also be used for loosening. Easy setting and saving of the default value. The audible and tactile clicks on reaching the scale values facilitate the safe setting of the desired torque value. The robust release mechanism guarantees a clearly audible and tactile release signal when the set torque value is reached. Fine-toothed reversible ratchet with 45 teeth. Accuracy of ±4 % as per DIN EN ISO 6789-1:2017-07. For clockwise and counterclockwise operation Torque Lock function: The torque function can be deactivated so that the tool can also be used for loosening screws and bolts With square head insert (including patent-registered socket locking) Extra click: audible and tactile torque setting Torque wrench gives an audible and tactile signal Application For clockwise and counterclockwise torque operation. The torque function can be deactivated (Torque Lock function), so that the tool can also be used for loosening. Precision Accuracy ±4 % of the set value, as per DIN EN ISO 6789-1:2017-07 Design With 1/4" square head drive with socket locking, square head insert to change the tightening direction, 45 teeth; easy setting and saving of the desired torque value, with audible and tactile locking when the scale values are reached (fine scale only in Newton meters), audible and tactile release mechanism when the set torque value is reached Handle Ergonomic 2-component handle Features and benefits The torque function can be deactivated so that the tool can also be used for loosening. With square head insert (including patent-registered socket locking) for controlled clockwise and counterclockwise torque operation. Precision of ±34 % as per DIN EN ISO 6789-1:2017-07. Easy setting and saving of the desired torque value; easy to read on main and fine scales. With audible and tactile locking when the scale values are reached. On reaching the desired torque value, an audible and tactile mechanism is triggered. ds: dsc: Scope of delivery Click-Torque Lock A 5 R/L Torque wrench, adjustable, Torque Lock function, square head insert (1/4"), clockwise/counterclockwise torque operation, 2.5-25 Nm, 1/4" x 2.5-25 Nm kts: torque spanner, adjustable, Torque Lock function, 1/4" square-through square, clockwise and anticlockwise tightening, 2.5-25 Nm kpn: Click-Torque Lock A 5 R/L kpn_dash: Click kpn_clear: ClickTorqueLockA5RL bkpn: WERA Click-Torque Lock A 5 R/L bkpn_clear: WERA ClickTorqueLockA5RL c_path: Home / Tools / Hand tools / Torque tools / Torque wrenches / Torque wrench | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque wrenches / Wera torque wrench | Home / Our brands / Wera / Wera Ranges / Wera click-torque lock sr_no_br_cl_ns: 05075693001 sr_ns: WERA05075693001
