r: 02830647 p: 11.239 pid: 43166 b: WERA q: 0 st: lt: 16 ean: 4013288108029 sr: WERA 05007640001 sr_no_br: 05007640001 sr_no_br_cl: 05007640001 sr_cl: WERA05007640001 sr_dash: sold: 101.151 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 8 mm Blade length 175 mm Blade thickness 1,6 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted n: WERA 334 saw blade screwdriver, garage blade, 1.6 x 8 x 175 mm - 05007640001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform Plus handle for comfortable ergonomic screwdriving, avoiding blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface "bites" into the screw head and unintentional slipping is a thing of the past. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Slotted screwdriver - workshop blade Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Application Slotted screws Blade Round Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component, sizes 2.0 x 12.0, 2.5 x 14.0: Kraftform with non-roll feature, single-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. ds: dsc: Scope of delivery 334 Screwdriver for slotted screws, 1.6 x 8 x 175 mm kts: saw blade screwdriver, garage blade, 1.6 x 8 x 175 mm kpn: 334 kpn_dash: kpn_clear: 334 bkpn: WERA 334 bkpn_clear: WERA 334 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05007640001 sr_ns: WERA05007640001
r: 03057803 p: 11.239 pid: 31850 b: WERA q: 0 st: lt: 7 ean: 4013288208446 sr: WERA 05023400001 sr_no_br: 05023400001 sr_no_br_cl: 05023400001 sr_cl: WERA05023400001 sr_dash: sold: 101.151 p_range: none type: standard act: 1 avo: 1 av: Length 60 mm Drive profile size 6 mm n: WERA 95 Vario T-handle holder for Vario blades, 6 x 60 mm - 05023400001 cn: HANDLE cn2: HANDLE cn_clear: HANDLE d: Product description T-handle screwdriver: The ideal handle shape to allow high torque transmission in difficult tightening and loosening situations. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. Vario T-handle for 6 mm Vario blades and adaptor Not suitable for bits with 1/4" hex drive T-handle screwdriver for the transmission of particularly high tightening and loosening torque Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working Application 6 mm Vario blades/adapters Blade Round Handle T-shape, 2 components, with hole for hanging. Features and benefits The ergonomically shaped 2-component T-handle with finger recesses and pleasant surface facilitates very high power transmission and fatigue-free working. By using the blade as an extension of your lower arm you can transfer particularly high torque. ds: dsc: Scope of delivery 95 Vario T-handle for Vario blades, 6 x 60 mm kts: T-handle holder for Vario blades, 6 x 60 mm kpn: 95 Vario kpn_dash: kpn_clear: 95Vario bkpn: WERA 95 Vario bkpn_clear: WERA 95Vario c_path: Home / Tools / Hand tools / Sockets and ratchets / Accessories and spare parts / Handle | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera accessories and spare parts / Wera handle sr_no_br_cl_ns: 05023400001 sr_ns: WERA05023400001
r: 02829016 p: 11.239 pid: 42953 b: WERA q: 0 st: lt: 10 ean: 4013288168320 sr: WERA 05671383001 sr_no_br: 05671383001 sr_no_br_cl: 05671383001 sr_cl: WERA05671383001 sr_dash: sold: 101.151 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Accessory/Part type Case Product Range Wera Joker n: WERA 9453 case 6000 for 4 Joker socket and ratchet spanners, empty, 290 x 100 mm - 05671383001 cn: ACCESSORY/PART WRENCH cn2: ACCESSORY/PART WRENCH cn_clear: ACCESSORYPARTWRENCH d: Product description Robust pouch for 4 Jokers; with rubber label. Offers space for 4 JOKER combination ratcheting wrenches Pouch for 4 Joker combination ratcheting wrenches, empty Robust bag with strong hook-and-loop fastener and hanger Features and benefits ds: dsc: Scope of delivery 9453 Pouch 6000 for 4 Joker Ratcheting combination wrenches, empty, 290 x 100 mm kts: case 6000 for 4 Joker socket and ratchet spanners, empty, 290 x 100 mm kpn: 9453 kpn_dash: kpn_clear: 9453 bkpn: WERA 9453 bkpn_clear: WERA 9453 c_path: Home / Tools / Hand tools / Keys / Accessories and spare parts / Accessory/part wrench | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera accessories and spare parts / Wera accessory/part wrench | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05671383001 sr_ns: WERA05671383001
r: 02827852 p: 8.36 pid: 44652 b: WERA q: 0 st: lt: 12 ean: 4013288041296 sr: WERA 05060149001 sr_no_br: 05060149001 sr_no_br_cl: 05060149001 sr_cl: WERA05060149001 sr_dash: sold: 100.32 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 3 Blade thickness Type of drive profile (bit) Square Connection size (bit) 1/4" VDE approved No Bit tip # 3 n: WERA 868/4 BTZ Square-Plus inside square bit, 3 x 50 mm - 05060149001 cn: BIT cn2: BIT cn_clear: BIT d: Product description BiTorsion bits for square head socket screws with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Best possible service life with the matching holder. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-F 6.3. Suitable for square head socket screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Square socket head screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design BiTorsion for long service life, extra-tough, for universal use Features and benefits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. The BiTorsion holder and the BiTorsion bit can, of course, be used independently of one another. ds: dsc: Scope of delivery 868/4 BTZ Square-Plus bits, # 3 x 50 mm kts: inside square bit, # 3 x 50 mm kpn: 868/4 BTZ Square-Plus kpn_dash: 868/4 BTZ Square kpn_clear: 8684BTZSquarePlus bkpn: WERA 868/4 BTZ Square-Plus bkpn_clear: WERA 8684BTZSquarePlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05060149001 sr_ns: WERA05060149001
r: 02953428 p: 16.694 pid: 31189 b: WERA q: 0 st: lt: 8 ean: 4013288163196 sr: WERA 05203914001 sr_no_br: 05203914001 sr_no_br_cl: 05203914001 sr_cl: WERA05203914001 sr_dash: sold: 100.164 p_range: none type: standard act: 1 avo: 1 av: Length 200 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH2 n: WERA 853/4 ACR SL bit Phillips bit with plastic sheath, magnetised, PH 2 x 200 mm - 05203914001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits with rough ribs (anti cam-out feature, ACR®) to prevent any slipping out of the screw head, permanently magnetized, thus screws can be held securely on the tip of the bit; with plastic sleeve, protects components from being damaged when screwdriving. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For Phillips screws ACR® (anti cam-out feature) to prevent any slipping out of the screw head Permanently magnetized, thus screws can be held securely on the tip of the bit With plastic sleeve, protects components from being damaged when screwdriving 1/4" hexagon drive (Wera connecting series 4) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use, ACR® (Anti Cam-Out Ribs) prevents bit from slipping out of screw head, permanently magnetized, thus screws can be held securely on the tip of the bit; with plastic sleeve, protects components from being damaged when screwdriving Features and benefits ACR® stands for "anti-cam-out ribs". ACR® bits have ribs at the drive tip that protect against slipping out of the screw head. It is recommended that ACR® bits are matched with ribbed ACR® screws for maximum effect. ACR® is a registered trademark of Phillips Screw Company. With plastic sleeve, protects components from being damaged when screwdriving Permanently magnetized, thus screws can be held securely on the tip of the bit. ds: dsc: Scope of delivery 853/4 ACR® SL bits with sleeve, magnetized, PH 2 x 200 mm kts: bit Phillips bit with plastic sheath, magnetised, PH 2 x 200 mm kpn: 853/4 ACR SL kpn_dash: kpn_clear: 8534ACRSL bkpn: WERA 853/4 ACR SL bkpn_clear: WERA 8534ACRSL c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05203914001 sr_ns: WERA05203914001
r: 03226505 p: 7.15 pid: 71429 b: WERA q: 0 st: lt: 8 ean: 4013288194800 sr: WERA 05118026001 sr_no_br: 05118026001 sr_no_br_cl: 05118026001 sr_cl: WERA05118026001 sr_dash: sold: 100.1 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size PH0 Blade length 40 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Phillips Product Range Wera Kraftform n: WERA 2050 PH Micro Kraftform Phillips screwdriver, PH 0 x 40 mm - 05118026001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro screwdriver for cross-recess Phillips screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Anti-roll feature and rotating cap for rapid twisting The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Application Phillips screws Blade Round Design Chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (red = Phillips) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2050 PH Screwdriver for Phillips screws for electronic applications, PH 0 x 40 mm kts: Kraftform Phillips screwdriver, PH 0 x 40 mm kpn: 2050 PH Micro kpn_dash: kpn_clear: 2050PHMicro bkpn: WERA 2050 PH Micro bkpn_clear: WERA 2050PHMicro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118026001 sr_ns: WERA05118026001
r: 02833745 p: 7.14 pid: 41830 b: WERA q: 0 st: lt: 14 ean: 4013288167859 sr: WERA 05022604001 sr_no_br: 05022604001 sr_no_br_cl: 05022604001 sr_cl: WERA05022604001 sr_dash: sold: 99.96 p_range: none type: standard act: 1 avo: 1 av: Width across flats 2,5 mm With ball head Yes With handle No Handle type VDE approved No With safety colour code 1000V No Non-sparking No Blade length 112 mm Short arm length 19 mm Overall length 112 mm n: WERA 950 SPKL socket spanner multicolour metric 2.5 x 112 mm - 05022604001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description Premium Wera L-key with colour-coded, convenient hose sleeve, which makes the tool easily accessible and the ergonomic and comfortable handle is easy on the hands even at low temperatures. The Hex Plus profile offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw head is almost eliminated. The ball on the long arm allows safe working even in difficult installation positions. The BlackLaser surface treatment makes for excellent surface protection, even from corrosion, and for long durability. Lasered and therefore abrasion-proof size marking on the L-key for quick access. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer Colour coded, easy-to-grip plastic sleeve, even at low temperatures Hexagonal ballpoint on the long arm Wear-resistant size marking Application Hexagon socket screws Design BlackLaser surface, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. L-keys made from circular material fit into the hand better and allow less strenuous work over a longer period. Additionally, the rubber sleeve provides a pleasant grip, particularly in applications at low temperatures. Colour coding and large stamp enable the desired L-key to be easily located. Moreover, the round material keys are more robust, particularly where smaller sizes are concerned. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 950 SPKL L-key Multicolour, metric, 2.5 x 112 mm kts: socket spanner multicolour metric 2.5 x 112 mm kpn: 950 SPKL kpn_dash: kpn_clear: 950SPKL bkpn: WERA 950 SPKL bkpn_clear: WERA 950SPKL c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05022604001 sr_ns: WERA05022604001
r: 08131762 p: 49.09 pid: 173583 b: WERA q: 2 st: 1 lt: 1 ean: 4013288233981 sr: WERA 05051513001 sr_no_br: 05051513001 sr_no_br_cl: 05051513001 sr_cl: WERA05051513001 sr_dash: sold: 98.18 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Bit holder type Internal hexagon Type of drive profile (bit) Mixed VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 6 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 20 RA-R bit set, 6-piece - 05051513001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Kraftform handle with magazine for 6 bits integrated in the handle; with telescopic blade; for 1/4" hex drive bits. The ratchet with fine toothing integrated in the handle allows fast working. Switching the screwdriving direction is intuitive: Turn the ring switch clockwise for clockwise screwdriving, turn it counterclockwise for counterclockwise screwdriving. Use position 0 to deactivate the ratchet mechanism for precise working. The telescopic blade with Rapidaptor quick-release chuck, which can be retracted into the handle, allows quick manual screwdriving even in confined working situations when the blade is retracted. The blade can be extended by simply pressing the locking sleeve. The tool can now be used as a fully-fledged screwdriver. The telescopic blade can be removed and used as a machine adapter, as well as returned to its original position. The Rapidaptor technology of the bit holder makes for a quick bit change. Includes 6 BiTorsion bits for long product life, tough, for universal use; stored in the bit magazine integrated in the handle. The strong permanent magnet in the 1/4" bit mounting ensures a secure hold of the bit. The 2-component Kraftform handle with the combination of hard and soft zones allows for a firm grip and precise working. With a robust pouch. The ratchet with fine toothing integrated in the handle allows fast working The innovative ratchet mechanism also allows fast "spinning". A real problem solver when there is no resistance from the screw Intuitive switching: If I turn the switch clockwise - the ratchet turns clockwise, if I turn the switch counterclockwise - it goes counterclockwise Integrated bit magazine with 6x 25 mm bits BiTorsion Bits Application Suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 and Wera connection series 1 and 4 Design Ratchet with fine toothing integrated in the handle, intuitive switching, use position 0 to deactivate the ratchet mechanism for precise working; 1/4" hexagonal bit mounting, magnetic; connector, telescopic blade, Rapidaptor technology with rapid-in, rapid-out, rapid-spin, chuck-all and single-hand functions. 6 BiTorsion bits for long product life, tough, for universal use. Take it easy toolfinder: with size stamping and colour coding by tip to help you find the required bit easily. Handle Kraftform with anti-roll protection, multi-component, integrated magazine Features and benefits The ratchet with fine toothing integrated in the handle allows fast working. The innovative ratchet mechanism also allows fast "spinning". A real problem solver when there is no resistance from the screw. Intuitive switching of the ratchet mechanism. Turn the switch clockwise for clockwise screwdriving; turn it counterclockwise for counterclockwise screwdriving. Use position 0 to deactivate the ratchet mechanism for precise working. The innovative ratchet mechanism also allows fast "spinning". A real problem solver when there is no resistance from the screw. This set has it all: ratchet integrated in the handle, a telescopic blade that can be retracted into the handle (which can also be removed and used as a bit holder in the screwdriver machine) and a bit magazine integrated in the handle. The Rapidaptor technology guarantees lightning-fast bit changes as well as easy wielding of the tool in machine operations via the fast-rotating sleeve. The sets come with a Kraftform handle, quick-release chuck and bits for manual and power tool operations. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. When the telescopic blade is retracted in the handle, the tool can be used even in confined working situations. The telescopic blade can be extended by simply pressing the locking sleeve. The tool can now be used as a fully-fledged screwdriver. ds: dsc: Scope of delivery Kraftform Kompakt 20 RA-R, 6 pieces 2x 851/1 BTZ bits: PH 1x25 mm, PH 2x25 mm 1x 855/1 BTZ bits: PZ 2 x 25 mm 2x 867/1 BTZ TORX® bits: TX 20x25 mm, TX 25x25 mm 1x 800/1 BTZ bits: 0.8 x 5.5 x 25 mm kts: bit set, 6-piece kpn: Kraftform Kompakt 20 RA-R kpn_dash: Kraftform Kompakt 20 RA kpn_clear: KraftformKompakt20RAR bkpn: WERA Kraftform Kompakt 20 RA-R bkpn_clear: WERA KraftformKompakt20RAR c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05051513001 sr_ns: WERA05051513001
r: 02042909 p: 48.925 pid: 42808 b: WERA q: 0 st: lt: 10 ean: 4013288102911 sr: WERA 05074715001 sr_no_br: 05074715001 sr_no_br_cl: 05074715001 sr_cl: WERA05074715001 sr_dash: sold: 97.85 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1,2 Nm Max. tightening torque 1,2 Nm Product Range Wera Kraftform n: WERA 7460 Kraftform torque screwdriver with standard settings with Rapidaptor quick-change holder 0.3 Nm x 0.3-1.2 Nm - 05074715001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Factory pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 0.3 Nm, 1.2 Nm Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 series Kraftform Torque screwdrivers, with factory pre-set value (0.3-3.0 Nm) and Rapidaptor quick-release chuck, handle size 105 mm, 7460 x 0.3 Nm x 0.3-1.2 Nm kts: Kraftform torque screwdriver with standard settings with Rapidaptor quick-change holder 0.3 Nm x 0.3-1.2 Nm kpn: 7460 kpn_dash: kpn_clear: 7460 bkpn: WERA 7460 bkpn_clear: WERA 7460 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074715001 sr_ns: WERA05074715001
r: 02818581 p: 19.504 pid: 45449 b: WERA q: 0 st: lt: 12 ean: 4013288105554 sr: WERA 05160896001 sr_no_br: 05160896001 sr_no_br_cl: 05160896001 sr_cl: WERA05160896001 sr_dash: sold: 97.52 p_range: none type: standard act: 1 avo: 1 av: Length 152 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH2 n: WERA 851/4 R PH bit Phillips with reduced shank, PH 2 x 152 mm - 05160896001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits with reduced shaft diameter for low-lying screw connections, enabling countersinking of screws without any surface damage. Profiled version. Extra-hard. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For Phillips screws With reduced shaft diameter Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Reduced shaft diameter Features and benefits Bits with reduced shaft diameter ensure that screws can be sunk without damaging the surface. This is particularly necessary in drywall construction applications. ds: dsc: Scope of delivery 851/4 R Reduced tip bits, PH 2 x 152 mm kts: bit Phillips with reduced shank, PH 2 x 152 mm kpn: 851/4 R PH kpn_dash: kpn_clear: 8514RPH bkpn: WERA 851/4 R PH bkpn_clear: WERA 8514RPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05160896001 sr_ns: WERA05160896001
r: 02823111 p: 9.73 pid: 45122 b: WERA q: 0 st: lt: 12 ean: 4013288105905 sr: WERA 05073523001 sr_no_br: 05073523001 sr_no_br_cl: 05073523001 sr_cl: WERA05073523001 sr_dash: sold: 97.3 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ1 Number per blister 1 n: WERA 855/4 Z SB bit Pozidriv, PZ 1 x 89 mm - 05073523001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for Pozidriv* screws. Tough, for universal use. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. * Pozidriv = registered trademark of the company European Industrial Service Ltd. Suitable for Pozidriv screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 855/4 Z SB bits, PZ 1 x 89 mm kts: bit Pozidriv, PZ 1 x 89 mm kpn: 855/4 Z SB kpn_dash: kpn_clear: 8554ZSB bkpn: WERA 855/4 Z SB bkpn_clear: WERA 8554ZSB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073523001 sr_ns: WERA05073523001
r: 02832178 p: 8.099 pid: 42909 b: WERA q: 0 st: lt: 12 ean: 4013288105783 sr: WERA 05073510001 sr_no_br: 05073510001 sr_no_br_cl: 05073510001 sr_cl: WERA05073510001 sr_dash: sold: 97.188 p_range: none type: standard act: 1 avo: 1 av: Shank size 1/4 inch Socket size 3/8" Type of drive profile (socket) Hexagonal Shank type External hexagon Length 50 mm n: WERA 869/4 M SB SiS cap bit magnetic 3/8" x 50 mm - 05073510001 cn: NUT SETTER cn2: NUT SETTER cn_clear: NUTSETTER d: Product description Imperial nutsetter for hexagon head screws. Comes with a strong permanent magnet. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Nutsetter for hexagon head screws Strong permanent magnet Imperial 1/4" hexagon drive (Wera connecting series 4) Application Hexagon headed bolts, screws and nuts Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Strong permanent magnet Features and benefits Nutsetters, magnetic, for easier application of the screw. ds: dsc: Scope of delivery 869/4 M SB Nutsetters, magnetic, 3/8" x 50 mm kts: cap bit magnetic 3/8" x 50 mm kpn: 869/4 M SB SiS kpn_dash: kpn_clear: 8694MSBSiS bkpn: WERA 869/4 M SB SiS bkpn_clear: WERA 8694MSBSiS c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Nut setter | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera nut setter sr_no_br_cl_ns: 05073510001 sr_ns: WERA05073510001
r: 03166689 p: 8.099 pid: 33821 b: WERA q: 1 st: 1 lt: 1 ean: 4013288212542 sr: WERA 05020201001 sr_no_br: 05020201001 sr_no_br_cl: 05020201001 sr_cl: WERA05020201001 sr_dash: sold: 97.188 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 10 mm Length 125 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (10 x 125 mm) - 05020201001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 10 x 125 mm kts: ring spanner (10 x 125 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020201001 sr_ns: WERA05020201001
r: 02828604 p: 6.942 pid: 42500 b: WERA q: 0 st: lt: 15 ean: 4013288155658 sr: WERA 05134655001 sr_no_br: 05134655001 sr_no_br_cl: 05134655001 sr_cl: WERA05134655001 sr_dash: sold: 97.188 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 25 Blade thickness Type of drive profile (bit) Torx Plus Tamper Resistant Connection size (bit) 1/4" VDE approved No Bit tip IPR25 n: WERA 867/4 IPR TORX PLUS bit with bore, 25 IPR x 50 mm - 05134655001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX PLUS® screws with safety pin. A 5-flank TORX PLUS® profile with bore hole. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For recessed TORX PLUS® IPR screws with safety pin TORX PLUS® IPR bit with bore hole on the output side Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX PLUS® IPR socket screws with safety pin Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits A 5-flank TORX PLUS® profile with a borehole. This drive geometry has only five flanks instead of the usual six and a borehole to protect safety screws against unauthorised unfastening. The screws cannot be turned with conventional, widely available tools. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 IPR TORX PLUS® bits with bore hole, 25 IPR x 50 mm kts: bit with bore, 25 IPR x 50 mm kpn: 867/4 IPR TORX PLUS kpn_dash: kpn_clear: 8674IPRTORXPLUS bkpn: WERA 867/4 IPR TORX PLUS bkpn_clear: WERA 8674IPRTORXPLUS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05134655001 sr_ns: WERA05134655001
r: 02828285 p: 9.68 pid: 42461 b: WERA q: 0 st: lt: 12 ean: 4013288115522 sr: WERA 05071085001 sr_no_br: 05071085001 sr_no_br_cl: 05071085001 sr_cl: WERA05071085001 sr_dash: sold: 96.8 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ2 n: WERA 3855/4 bit Pozidriv, stainless steel, PZ 2 x 89 mm - 05071085001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits out of stainless steel for Pozidriv* screws. Wera stainless are made out of stainless steel which prevents the formation of unsightly extraneous rust. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. * Pozidriv = registered trademark of European Industrial Service Ltd. Suitable for Pozidriv screws Stainless Steel Bits Solution to the extraneous rust problem: fasten stainless screws with stainless tools Vacuum ice-hardened 1/4" hexagon drive (Wera connecting series 4) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Stainless steel for minimising rust Features and benefits Stainless steel has the property of not rusting. However, if tools made out of conventional steel are used for stainless steel components or screws, the particles left behind from these tools can adhere to the surface and then rust. This effect - known as extraneous rust - can impair the visual appearance and even cause structural damage that may result in expensive repair work. The wear particles that cause this rust effect can be prevented by using stainless steel tools. Wera stainless steel bits are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel bits from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. ds: dsc: Scope of delivery 3855/4 Bits, stainless, PZ 2 x 89 mm kts: bit Pozidriv, stainless steel, PZ 2 x 89 mm kpn: 3855/4 kpn_dash: kpn_clear: 38554 bkpn: WERA 3855/4 bkpn_clear: WERA 38554 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05071085001 sr_ns: WERA05071085001
r: 02818347 p: 1.21 pid: 43861 b: WERA q: 0 st: lt: 12 ean: 4013288099976 sr: WERA 05134919001 sr_no_br: 05134919001 sr_no_br_cl: 05134919001 sr_cl: WERA05134919001 sr_dash: sold: 96.8 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH1 n: WERA 851/1 A PH bit Phillips, PH 1 x 25 mm - 05134919001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for Phillips screws. Extra-hard design. Profiled version. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For Phillips screws Profiled version Optimum torque transfer and enhanced penetration into the head of the screw Particularly hard for semi-hard materials 1/4" hexagon drive (Wera connecting series 1) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Extra-hard, profiled version Features and benefits A stands for aviation. A bits are particularly hard bits with a sharp-edged profile which e.g. penetrates screw profiles full of paint (such as on fuselage panels) ensuring a dependable transfer of force between the bit and the screw. ds: dsc: Scope of delivery 851/1 A bits, PH 1 x 25 mm kts: bit Phillips, PH 1 x 25 mm kpn: 851/1 A PH kpn_dash: kpn_clear: 8511APH bkpn: WERA 851/1 A PH bkpn_clear: WERA 8511APH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05134919001 sr_ns: WERA05134919001
r: 87010124 p: 3.22 pid: 37412 b: WERA q: 0 st: lt: 13 ean: 4013288012623 sr: WERA 05056303001 sr_no_br: 05056303001 sr_no_br_cl: 05056303001 sr_cl: WERA05056303001 sr_dash: sold: 96.6 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 25 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 1,5 mm Drive profile size (bit) 1,5 mm Product Range Wera Hex-Plus n: WERA 840/1 Z Hex-Plus hexagon bit, 1.5 x 25 mm - 05056303001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw head is almost eliminated. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/1 Z bits, 1.5 x 25 mm kts: hexagon bit, 1.5 x 25 mm kpn: 840/1 Z Hex-Plus kpn_dash: 840/1 Z Hex kpn_clear: 8401ZHexPlus bkpn: WERA 840/1 Z Hex-Plus bkpn_clear: WERA 8401ZHexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05056303001 sr_ns: WERA05056303001
r: 02072166 p: 9.586 pid: 42837 b: WERA q: 0 st: lt: 8 ean: 4013288094308 sr: WERA 05059641001 sr_no_br: 05059641001 sr_no_br_cl: 05059641001 sr_cl: WERA05059641001 sr_dash: sold: 95.86 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 89 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 2,5 mm Drive profile size (bit) 2,5 mm Product Range Wera Hex-Plus n: WERA 840/4 Z Hex-Plus BO hexagonal BO bits with bore, 2.5 x 89 mm - 05059641001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough viscous Wera bits for hexagon socket screws for universal use. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Hexagon socket BO screws have a protruding pin in their drive profile. This prevents any unauthorised loosening since the "normal" hex tools cannot move these screws. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For hexagon socket screws with safety pin (BO = with bore hole) Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws with safety pin (BO = with bore hole) Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus with bore hole, tough, for universal use Features and benefits For hexagon socket screws with safety pin. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z Tamper-proof Hex-Plus BO bits, 2.5 x 89 mm kts: hexagonal BO bits with bore, 2.5 x 89 mm kpn: 840/4 Z Hex-Plus BO kpn_dash: 840/4 Z Hex kpn_clear: 8404ZHexPlusBO bkpn: WERA 840/4 Z Hex-Plus BO bkpn_clear: WERA 8404ZHexPlusBO c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05059641001 sr_ns: WERA05059641001
r: 02835682 p: 10.63 pid: 43727 b: WERA q: 0 st: lt: 14 ean: 4013288108661 sr: WERA 05118184001 sr_no_br: 05118184001 sr_no_br_cl: 05118184001 sr_cl: WERA05118184001 sr_dash: sold: 95.67 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size T8 Blade length 60 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx Product Range Wera Kraftform n: WERA 2067 TORX HF Kraftform screwdriver with holding function, TX 8 x 60 mm - 05118184001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. With practical holding function: The clamping force resulting from the seating stress between the tip and the screw profile keeps the screws securely on the tool. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro TORX® HF screwdriver with holding function for recessed TORX® screws Multi-component Kraftform Micro handle with anti-roll feature and rotating cap The Wera Black Point tip offers an exact fit and optimum corrosion protection Holding function for TORX® screws, chrome-plated Take it easy tool finder: colour coding according to profile and size Application TORX® socket screws Blade Round Design Holding function for TORX® screws made according to Acument Global Technologies Inc. specifications, chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (green = TORX®) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2067 TORX® HF Screwdriver with holding function for electronic applications, TX 8 x 60 mm kts: Kraftform screwdriver with holding function, TX 8 x 60 mm kpn: 2067 TORX HF kpn_dash: kpn_clear: 2067TORXHF bkpn: WERA 2067 TORX HF bkpn_clear: WERA 2067TORXHF c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118184001 sr_ns: WERA05118184001
r: 02835680 p: 10.63 pid: 43715 b: WERA q: 1 st: 1 lt: 1 ean: 4013288108647 sr: WERA 05118182001 sr_no_br: 05118182001 sr_no_br_cl: 05118182001 sr_cl: WERA05118182001 sr_dash: sold: 95.67 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size T6 Blade length 40 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx Product Range Wera Kraftform n: WERA 2067 TORX HF Kraftform screwdriver with holding function, TX 6 x 40 mm - 05118182001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. With practical holding function: The clamping force resulting from the seating stress between the tip and the screw profile keeps the screws securely on the tool. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro TORX® HF screwdriver with holding function for recessed TORX® screws Multi-component Kraftform Micro handle with anti-roll feature and rotating cap The Wera Black Point tip offers an exact fit and optimum corrosion protection Holding function for TORX® screws, chrome-plated Take it easy tool finder: colour coding according to profile and size Application TORX® socket screws Blade Round Design Holding function for TORX® screws made according to Acument Global Technologies Inc. specifications, chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (green = TORX®) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2067 TORX® HF Screwdriver with holding function for electronic applications, TX 6 x 40 mm kts: Kraftform screwdriver with holding function, TX 6 x 40 mm kpn: 2067 TORX HF kpn_dash: kpn_clear: 2067TORXHF bkpn: WERA 2067 TORX HF bkpn_clear: WERA 2067TORXHF c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118182001 sr_ns: WERA05118182001
