r: 41071387 p: 59.338 pid: 71983 b: WERA q: 0 st: lt: 14 ean: 4013288121882 sr: WERA 05003600001 sr_no_br: 05003600001 sr_no_br_cl: 05003600001 sr_cl: WERA05003600001 sr_dash: sold: 1661.464 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Length 277 mm Drive profile size 1/2" Non-sparking No VDE approved No With safety colour code 1000V No Product Range Wera Zyklop n: WERA 8000 C Zyklop Speed Ratchet with 1/2" drive (1/2" x 277 mm) - 05003600001 cn: RATCHET SPANNER cn2: RATCHET SPANNER cn_clear: RATCHETSPANNER d: Product description Zyklop ratchet with 1/2" drive. The fine toothing with 72 teeth allows for a low return angle of 5°. The ratchet head swivels freely and can be locked in any position using the slide switch on both sides. Unproblematic working with plenty of hand space even in very narrow or difficult-to-reach installation situations. The pre-defined positions at 0°, 15° and 90° to the left and right guarantee safe working without the ratchet head slipping. In the 0° position, the ratchet with adapter and bit can be used like a conventional screwdriver. The flywheel design helps accelerate the screwdriving process. The rotationally symmetrical design of the Kraftform handle and the fast-rotating sleeve support rapid turning. Thanks to the shape of the Kraftform handle being perfectly adapted to the hand, hand injuries such as blisters and calluses are avoided. The hard materials used for the handle guarantee quick hand switching without the risk of the skin "sticking" to the handle. The softer, "non-slip" zones offer transmission of high forces without loss. For 1/2" square head socket wrench inserts as well as 1/2" connectors with square head drive, with ball lock. Combines five different types of a ratchet in one Flywheel design and easy-to-grip free-turning sleeve for very high working speeds Freely pivoting ratchet head, push button release and left/right switchover Fine-tooth design allows a small return angle of 5° Can also be used as a screwdriver Application 1/2" square drive sockets and 1/2" adapters with square drive, equipped with ball lock Design Flywheel design and easy-to-grip free-turning sleeve for faster work, swivel ratchet head, defined lock positions at 0° and 90° to the left and right as well as at 15° before 90° inwards, at 0° it can be used like a conventional screwdriver, pushbutton release, left/right switchover, fine-tooth design, small return angle of 5° Handle Multi-component Kraftform handle ensures minimum fatigue Features and benefits Incredibly fast 1/4" Zyklop Speed ratchet with pivoting ratchet head and 5 predefined locking positions 1. Fine-tooth ratchet 2. Flex-head ratchet 3. Angle ratchet 4. Quick-release ratchet 5. Power ratchet 6. Screwdriver The ratchet head pivots freely and can be locked into any defined position by using the slide switch that is positioned on either side. It is even possible to work in very confined and difficult-to-access areas with enhanced hand clearance. The predefined locking at 0°, 15° and 90°, both to the right and left, ensure safe working without any slipping of the ratchet head. The Zyklop Speed ratchets are really fast movers. The gyrating mass design means that screwdriving is accelerated. The rotation-symmetric structure of the Kraftform handle and the free-turning sleeve reinforce this rapid twisting process, particularly when the ratchet does not engage due to too little resistance in the thread. All Zyklop Speed ratchets feature a thumbwheel that can be used to quickly and easily switch between clockwise and anticlockwise rotation, at any position. No complicated handling, no loss of time! The reversible ratchet with 72 fine-pitched teeth has a low return angle of only 5°. This short stroke allows fast and precise work in all types of installation. The ratchet can be used as a conventional screwdriver in the 0° position by attaching a bitholding adaptor and a bit. The ball lock holds the sockets and attachments securely, ensuring safe working. A changeover into any predefined position is completed by simply pressing the release button - this is even the case in the 90° position. ds: dsc: Scope of delivery 8000 C Zyklop Speed Ratchet with 1/2" drive, 1/2" x 277 mm kts: Zyklop Speed Ratchet with 1/2" drive (1/2" x 277 mm) kpn: 8000 C kpn_dash: kpn_clear: 8000C bkpn: WERA 8000 C bkpn_clear: WERA 8000C c_path: Home / Tools / Hand tools / Sockets and ratchets / Ratchets / Ratchet spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera ratchets / Wera ratchet spanner | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05003600001 sr_ns: WERA05003600001
r: 02829061 p: 24.628 pid: 42746 b: WERA q: 3 st: 1 lt: 1 ean: 4013288138927 sr: WERA 05073240001 sr_no_br: 05073240001 sr_no_br_cl: 05073240001 sr_cl: WERA05073240001 sr_dash: sold: 1650.076 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder type Internal hex VDE approved No With safety colour code 1000V ESD No Quantity per set 6 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 28 SB screwdriver handle with bit magazine 6-piece - 05073240001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Wera compact tools with multi-component Kraftform handle for high working speeds and particularly ergonomic screwdriving. Bit magazine integrated in the handle, for storage of 6 bits. The bayonet blade can be retracted for tight screwdriving situations. It can also be removed for machine operation.The strong permanent magnet guarantees a tight fit of the bits. Kraftform Kompakt 28 Kraftform holder with anti-roll feature, multi-component, bayonet blade and bit magazine Adaptor bayonet with stainless sleeve and strong permanent magnet Suitable for bits with 1/4" hexagon drive (Wera connecting series 1) Tough viscous bits for universal use Application Suitable for bits with 1/4" - external hexagon drive as per DIN ISO 1173-C 6,3 and Wera connection series 1 Design Attachment, telescopic, with stainless steel sleeve and strong permanent magnet Handle Kraftform with anti-roll protection, multi-component, integrated magazine Features and benefits The sets in the series Kraftform Kompakt 28 are really something. A 2 position telescopic blade can be retracted into the handle for confined space operation or extended for more reach. It can also be removed and used as a 100 mm bit holder in the power tool. Six bits are conveniently integrated into a push-button opening bit magazine. When the unique telescopic blade is lowered into the handle, fast, easy screw-driving action is possible, even in the tightest spots! By pushing the clamping sleeve, the telescopic blade can be extended out of the handle and the compact tool becomes a full-sized screwdriver. If the clamping sleeve is pushed again the telescopic blade can be taken out of the handle, and be used as a machine bit adaptor. Strong permanent magnet for secure fit of bits. The sets come with a Kraftform handle, quick-release chuck and bits for manual and power tool operations. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery Kraftform Kompakt 28 SB, 6 pieces 2x 851/1 Z bits: PH 1x25 mm, PH 2x25 mm 2x 855/1 Z bits: PZ 1x25 mm, PZ 2x25 mm 2x 800/1 Z bits: 1x5.5x25 mm, 1.2x6.5x25 mm kts: screwdriver handle with bit magazine 6-piece kpn: Kraftform Kompakt 28 SB kpn_dash: kpn_clear: KraftformKompakt28SB bkpn: WERA Kraftform Kompakt 28 SB bkpn_clear: WERA KraftformKompakt28SB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05073240001 sr_ns: WERA05073240001
r: 08085418 p: 78.347 pid: 70284 b: WERA q: 0 st: lt: 14 ean: 4013288225320 sr: WERA 05150102001 sr_no_br: 05150102001 sr_no_br_cl: 05150102001 sr_cl: WERA05150102001 sr_dash: sold: 1645.287 p_range: none type: standard act: 1 avo: 1 av: VDE approved Yes With safety colour code 1000V No Quantity per set 16 n: WERA 9711 screwdriver set VDE Set 1 in foam insert 16-piece - 05150102001 cn: SCREWDRIVER MODULE cn2: SCREWDRIVER MODULE cn_clear: SCREWDRIVERMODULE d: Product description Durable foam insert; two-coloured for quick identification of missing parts; suitable for the Tool Rebel roller cabinet, equipped with 14 Wera Kraftform VDE screwdrivers as well as two screw grippers. High-quality, durable foam insert without chemical vapours Screwdriver with insulated blades for safe working up to 1,000 volt, five of which with reduced blade diameter for lower-lying screws Optimum fit for the best possible removal of the tools from the foam insert Water- and oil-repellent, low maintenance and easy to clean Protection of the tool from dirt and impact 16-piece VDE-insulated screwdriver set (14 screwdrivers, 2 screw grippers) in a two-coloured foam insert for the Tool Rebel roller cabinet. Width x height x depth: without tools 344 x 30 x 392 mm, with tools 344 x 46 x 392 mm. Features and benefits The tools sit securely in the foam thanks to precise contour cutouts, but are easy to remove. The carefully designed arrangement of the tools ensures space-saving storage and quick access to each tool. After removing the tool the light grey second foam becomes visible and therefore missing tools are quickly identified. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Push the screw gripper onto the tip of the screwdriver until the end of the blade protrudes from the rubber blade holder. Pull the screw gripper towards the screwdriver handle until the two arms of the gripper sit against the head of the screw and are spread slightly apart. The Wera screw gripper releases the screw automatically after it has been fastened. ds: dsc: Scope of delivery 9711 Foam insert VDE screwdriver set 1, 16 pieces 2x 162 iS PH VDE Insulated screwdriver with reduced blade diameter for Phillips screws: PH 1x80 mm, PH 2x100 mm 2x 165 iS PZ VDE Insulated screwdriver with reduced blade diameter for Pozidriv screws: PZ 1x80 mm, PZ 2x100 mm 1x 165 i PZ/S VDE Insulated screwdriver for PlusMinus screws (Pozidriv/slotted): # 2 x 100 mm 3x 160 i VDE Insulated screwdriver for slotted screws: 0.4x2.5x80 mm, 0.8x4x100 mm, 1x5.5x125 mm 1x 160 iS VDE Insulated screwdriver with reduced blade diameter for slotted screws: 0.6 x 3.5 x 100 mm 5x 167 i VDE Insulated screwdriver for TORX® screws: TX 10x80 mm, TX 15x80 mm, TX 20x80 mm, TX 25x100 mm, TX 30x100 mm 1x 1440 Screw Gripper: 4.5-6 x 41 mm 1x 1442 Screw Gripper: 6.0-8.5 x 41 mm 1x 9811 Foam insert VDE screwdriver set 1, empty: 344 x 30 x 392 mm kts: screwdriver set VDE Set 1 in foam insert 16-piece kpn: 9711 kpn_dash: kpn_clear: 9711 bkpn: WERA 9711 bkpn_clear: WERA 9711 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver module | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver module sr_no_br_cl_ns: 05150102001 sr_ns: WERA05150102001
r: 03176887 p: 32.066 pid: 31339 b: WERA q: 2 st: 1 lt: 1 ean: 4013288219107 sr: WERA 05022640001 sr_no_br: 05022640001 sr_no_br_cl: 05022640001 sr_cl: WERA05022640001 sr_dash: sold: 1635.366 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Min. width across flats 5/64 inch Max. width across flats 3/8 inch With ball head Yes Quantity per set 9 Product Range Wera Hex-Plus n: WERA 950/9 Hex-Plus Multicolour Imperial 2 socket wrench set inch BlackLaser 9-piece - 05022640001 cn: HEX KEY SET cn2: HEX KEY SET cn_clear: HEXKEYSET d: Product description 9 L-keys with plastic sleeve (SPKL) made from circular, grippable material. The sleeve makes working comfortable even at low temperatures and is easy on the fingers. All L-keys are easily accessible due to their colour coding and size markings. The wear-free material of the clip guarantees easy removal and a secure hold of the L-key. For hexagonal socket screws. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer L-keys are quickly to hand thanks to their size markings Wear-resistant size marking Wear-resistant clip material for enhanced durability 9-piece set in a two-component clip Application Hexagon socket screws Design BlackLaser surface, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. L-keys made from circular material fit into the hand better and allow less strenuous work over a longer period. Additionally, the rubber sleeve provides a pleasant grip, particularly in applications at low temperatures. Colour coding and large stamp enable the desired L-key to be easily located. Moreover, the round material keys are more robust, particularly where smaller sizes are concerned. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The wear-resistant clip material ensures that the L-keys are securely held yet are easy to remove. ds: dsc: Scope of delivery 950/9 Hex-Plus Multicolour Imperial 2 L-key set, imperial, BlackLaser, 9 pieces 9x 950 SPKL L-key Multicolour, Imperial: 3/8"x224 mm, 5/16"x195 mm, 1/4"x185 mm, 7/32"x172 mm, 3/16"x154 mm, 5/32"x137 mm, 1/8"x123 mm, 3/32"x112 mm, 5/64"x101 mm kts: socket wrench set inch BlackLaser 9-piece kpn: 950/9 Hex-Plus Multicolour Imperial 2 kpn_dash: 950/9 Hex kpn_clear: 9509HexPlusMulticolourImperial2 bkpn: WERA 950/9 Hex-Plus Multicolour Imperial 2 bkpn_clear: WERA 9509HexPlusMulticolourImperial2 c_path: Home / Tools / Hand tools / Keys / Sets / Hex key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera hex key set | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05022640001 sr_ns: WERA05022640001
r: 41071142 p: 70.909 pid: 71149 b: WERA q: 0 st: lt: 14 ean: 4013288000675 sr: WERA 05002990001 sr_no_br: 05002990001 sr_no_br_cl: 05002990001 sr_cl: WERA05002990001 sr_dash: sold: 1630.907 p_range: none type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No ESD No Supplied in Case Quantity per set 11 n: WERA 88/1 Vario-Set screwdriver set 11-piece - 05002990001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description 11-piece Vario set with handle and blades. In a practical belt pouch, enabling the tools to be safely and securely stored and to always be at hand. The Kraftform grip on the handle stands for pleasant, ergonomic working and makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. The hexagonal non-roll feature prevents any annoying rolling away at the workplace. The integrated hex bolster allows higher torque to be applied with an open-end or ring spanner. The double blades are out of high quality bit material and are therefore particularly durable. The Wera Black Point tip on the blade offers a perfect fit and optimised corrosion protection. Vario set with handle and 10 combination blades Smooth hard zones for high speed turning, soft grip zones for high torque transfer Chrome-plated hexagonal blade material, 6 mm Black Point tip offers a perfect fit with optimised corrosion protection In a robust belt pouch 11-piece set, specifically for demanding workshop environments Features and benefits The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The 6 mm double-ended blades of 175 mm length are out of high quality bit material which gives them a particularly long service life. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery 88/1 Vario set, 11 pieces 1x 80 Vario handle: 6 x 98 mm 1x 85 Combination blade for Phillips screws: PH 1 x PH 2 x 175 mm 1x 86 Combination blade for Pozidriv screws: PZ 1 x PZ 2 x 175 mm 3x 87 Combination blade for TORX® screws: TX 10xTX 15x175 mm, TX 20xTX 25x175 mm, TX 30xTX 40x175 mm 2x 81 Combination blade for slotted screws: 0.6x4x1x6x175 mm, 0.8x5x1.2x7x175 mm 3x 84 Combination blade for hexagon socket screws: 4x4 x 175 mm, 5x5 x 175 mm, 6x6 x 175 mm kts: screwdriver set 11-piece kpn: 88/1 Vario-Set kpn_dash: 88/1 Vario kpn_clear: 881VarioSet bkpn: WERA 88/1 Vario-Set bkpn_clear: WERA 881VarioSet c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set sr_no_br_cl_ns: 05002990001 sr_ns: WERA05002990001
r: 03262217 p: 85.785 pid: 71192 b: WERA q: 0 st: lt: 16 ean: 4013288223050 sr: WERA 05004281001 sr_no_br: 05004281001 sr_no_br_cl: 05004281001 sr_cl: WERA05004281001 sr_dash: sold: 1629.915 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Connection size 3/8" Supplied in Case Quantity per set 18 Product Range Wera Zyklop n: WERA 8009 Zyklop Pocket Set 2 compact ratchet with integrated 18-piece bit magazine - 05004281001 cn: BIT AND HAND SOCKET SET cn2: BIT AND HAND SOCKET SET cn_clear: BITANDHANDSOCKETSET d: Product description Compact Zyklop ratchet with bit magazine for the pocket. Magnetic direct mounting for 1/4" hex drive bits and 3/8" sockets. Rapid tool change thanks to the non-locking mounting. As the head is lockable at 0°, 15° and 90°, the tool can be used as a ratchet and as a ratchet screwdriver. The fine toothing with 72 teeth allows for a low return angle of 5°. Wide range of applications thanks to 12 bits integrated in the handle. The robust ratchet mechanism allows for ample torque. Perfect combination of a Zyklop ratchet with a 12-piece screwdriver set. The 75 mm long universal holder for 1/4" hex drive bits can be used as an extension. Including sockets in the commonest dimensions. One robust textile holster 9468 to be attached to the belt and docked onto the Wera 2go system. Compact Zyklop ratchet with integrated bit magazine The magnetic direct mounting simultaneously turns the 3/8" ratchet into a bit ratchet screwdriver with 1/4" bit mounting Freely pivoting ratchet head with 5 predefined locking positions Fine tooth reversible ratchet (72 teeth) for a low return angle of only 5° Captive and freely swivelling bit magazine for easy removal and secure storage of the bits 18-piece set; 1 Zyklop Pocket 8009 for 3/8" sockets as well as 3/8" connectors with square head drive; also suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 and Wera connection series 1 and 4. 3/8" ratchet and 1/4" bit ratchet screwdriver; freely swivelling ratchet head; pre-defined positions at 0°, 15° and 90° to the left and right; can be used as a conventional screwdriver in the 0° position; clockwise/counterclockwise switching, fine-toothed, small return angle of 5°; magnetic direct mounting. Multi-component Kraftform handle for fatigue-free working; captive, freely swivelling magazine with 12 bits integrated in the handle, 1/4", 25 mm length; one universal holder (75 mm length) with stainless steel sleeve and strong permanent magnet, suitable for mounting bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and Wera connection series 1; 3 Zyklop sockets, 3/8"; one robust textile tool holster 9468, can be attached to the belt and docked onto the Wera 2go system. Features and benefits Zyklop Pocket The magnetic direct mounting is suitable for 3/8" sockets as well as 1/4" bits without the need for an adapter. A captive, freely swivelling bit magazine for 12 bits (1/4", 25 mm length) is integrated in the handle of the compact Zyklop ratchet. The swivelling bit magazine allows for the bits to be removed easily in almost any situation and cannot be lost. The bits are safely stored. The ratchet head pivots freely and can be locked into any defined position by using the slide switch that is positioned on either side. It is even possible to work in very confined and difficult-to-access areas with enhanced hand clearance. The predefined locking at 0°, 15° and 90°, both to the right and left, ensure safe working without any slipping of the ratchet head. Thanks to the sliding switch on both sides, the ratchet head can be locked at the pre-defined positions 0° as well as 15° and 90° to the right and left. The fine toothing with 72 teeth allows for a low return angle of only 5° for working in constricted screwdriving situations. The Zyklop Pocket ratchet can be quickly and easily reversed for clockwise/anti-clockwise rotation in any position using the knurl. ds: dsc: Scope of delivery 8009 Zyklop Pocket Set 2, 18 pieces 1x 8009 Zyklop Pocket: 3/8" x 1/4" x 133 mm 1x 893/1/1 Universal Bit Holder: 1/4" x 75 mm 2x 851/1 BTZ bits: PH 1x25 mm, PH 2x25 mm 2x 855/1 BTZ bits: PZ 1x25 mm, PZ 2x25 mm 4x 867/1 BTZ TORX® bits: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm 4x 840/1 BTZ bits: 3x25 mm, 5x25 mm, 6x25 mm, 4x25 mm 3x 8790 HMB Zyklop socket with 3/8" drive: 8x29 mm, 10x29 mm, 13x29 mm 1x 9468 Zyklop Pocket holster, empty: 155 x 65 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mm kts: compact ratchet with integrated 18-piece bit magazine kpn: 8009 Zyklop Pocket Set 2 kpn_dash: kpn_clear: 8009ZyklopPocketSet2 bkpn: WERA 8009 Zyklop Pocket Set 2 bkpn_clear: WERA 8009ZyklopPocketSet2 c_path: Home / Tools / Hand tools / Mixed sets / Single sets / Bit and hand socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera mixed sets / Wera single sets / Wera bit and hand socket set | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05004281001 sr_ns: WERA05004281001
r: 02830469 p: 37.024 pid: 42391 b: WERA q: 1 st: 1 lt: 1 ean: 4013288160713 sr: WERA 05006480001 sr_no_br: 05006480001 sr_no_br_cl: 05006480001 sr_cl: WERA05006480001 sr_dash: sold: 1629.056 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved Yes With safety colour code 1000V No Quantity per set 7 Product Range Wera Kraftform n: WERA 160 iS/7 screwdriver set Kraftform Plus Series 100 + single-pole phase tester in holder, reduced blade diameter 7-piece - 05006480001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 7-piece screwdriver set with reduced shaft diameter and integrated insulation protection so that even low-lying screw and spring elements can be accessed and actuated. Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Take it easy Tool Finder: colour coding according to profile and size. The anti-roll feature prevents any bothersome rolling away at the workplace. Including single-pole phase tester and 1 rack for storage. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Reduced shaft diameter Kraftform: The safety screwdriver. With reduced blade diameter, single-pole phase tester and rack. Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted, Phillips and PlusMinus screws (Pozidriv/slotted) Content 7-piece set and rack in display carton Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. Our screwdrivers are tested for dielectric strength under a 10,000 volt load to make sure that their most important property, their insulation, has been exhaustively tested. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces - resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 160 iS/7 Rack Screwdriver set Kraftform Plus Series 100, single-pole phase tester and rack. With reduced blade diameter, 7 pieces 2x 162 iS PH VDE Insulated screwdriver with reduced blade diameter for Phillips screws: PH 1x80 mm, PH 2x100 mm 1x 165 iS PZ/S VDE Insulated screwdriver with reduced blade diameter for PlusMinus screws (Pozidriv/slotted): # 2 x 100 mm 3x 160 iS VDE Insulated screwdriver with reduced blade diameter for slotted screws: 0.6x3.5x100 mm, 0.8x4x100 mm, 1x5.5x125 mm 1x 247 Single-pole phase tester: 0.5 x 3 x 70 mm kts: screwdriver set Kraftform Plus Series 100 + single-pole phase tester in holder, reduced blade diameter 7-piece kpn: 160 iS/7 kpn_dash: kpn_clear: 160iS7 bkpn: WERA 160 iS/7 bkpn_clear: WERA 160iS7 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05006480001 sr_ns: WERA05006480001
r: 02836475 p: 107.272 pid: 33553 b: WERA q: 0 st: lt: 8 ean: 4013288173843 sr: WERA 05004019001 sr_no_br: 05004019001 sr_no_br_cl: 05004019001 sr_cl: WERA05004019001 sr_dash: sold: 1609.08 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Connection size 1/4" Supplied in Case Quantity per set 24 Product Range Wera Zyklop n: WERA 8100 SA 9 zyklop speed ratchet set, 1/4 drive, inch (28 -piece) - 05004019001 cn: BIT AND HAND SOCKET SET cn2: BIT AND HAND SOCKET SET cn_clear: BITANDHANDSOCKETSET d: Product description Incredibly compact set arrangement with many tools in a minimum of space. A completely new ratchet set feeling thanks to the unique textile boxes that are very robust and durable. They can be positioned upright for tidy storage on the workshop shelf. Additional surface protection due to textile outer material. Low weight and volume for simpler mobility. Take it easy Tool Finder with colour coding according to sizes. Freely pivoting ratchet head with 5 predefined locking positions Fine-pitched with 72 teeth Small return angle of only 5° Free-turning sleeve for high working speeds With Take it easy tool finder: colour coding by size 28-piece set; in a surface-preserving, compact and extremely robust textile box; low volume and weight for simplified mobility1 Zyklop Speed Ratchet with 1/4" drive, 9 Zyklop sockets, 1 Zyklop extension (long) with free-turning sleeve, 1 "Wobble" extension, 1 adaptor with quick-release chuck, 15 bits Features and benefits Incredibly fast 1/4" Zyklop Speed ratchet with pivoting ratchet head and 5 predefined locking positions 1. Fine-tooth ratchet 2. Flex-head ratchet 3. Angle ratchet 4. Quick-release ratchet 5. Power ratchet 6. Screwdriver The ratchet head pivots freely and can be locked into any defined position by using the slide switch that is positioned on either side. It is even possible to work in very confined and difficult-to-access areas with enhanced hand clearance. The predefined locking at 0°, 15° and 90°, both to the right and left, ensure safe working without any slipping of the ratchet head. The Zyklop Speed ratchets are really fast movers. The gyrating mass design means that screwdriving is accelerated. The rotation-symmetric structure of the Kraftform handle and the free-turning sleeve reinforce this rapid twisting process, particularly when the ratchet does not engage due to too little resistance in the thread. All Zyklop Speed ratchets feature a thumbwheel that can be used to quickly and easily switch between clockwise and anticlockwise rotation, at any position. No complicated handling, no loss of time! The reversible ratchet with 72 fine-pitched teeth has a low return angle of only 5°. This short stroke allows fast and precise work in all types of installation. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The textile boxes offer dramatically improved portability, and are space-saving to boot! This means you can now carry the same collection of tools, in a much more compact and comfortable package. The hassle of running back and forth for the right tools has now become a thing of the past. And the much lower weight of a set makes carrying more convenient than ever before. The textile box including the tool will even survive a fall undamaged. ds: dsc: Scope of delivery 8100 SA 9 Zyklop Speed Ratchet Set, 1/4" drive, imperial, 28 pieces 1x 8000 A Zyklop Speed Ratchet with 1/4" drive: 1/4" x 152 mm 9x 8790 HMA Zyklop 1/4" socket: 3/16"x23 mm, 7/32"x23 mm, 1/4"x23 mm, 9/32"x23 mm, 5/16"x23 mm, 11/32"x23 mm, 3/8"x23 mm, 7/16"x23 mm, 1/2"x23 mm 1x 8794 LA Zyklop extension with free-turning sleeve, long, 1/4": 1/4" x 150 mm 1x 8794 A Zyklop wobble extension, 1/4": 1/4" x 56 mm 1x 8784 A1 Zyklop bit adaptor, 1/4": 1/4" x 37 mm 3x 851/4 TZ bits: PH 1x50 mm, PH 2x50 mm, PH 3x50 mm 2x 855/4 TZ bits: PZ 1x50 mm, PZ 2x50 mm 6x 867/4 Z TORX® bits: TX 10x50 mm, TX 15x50 mm, TX 20x50 mm, TX 25x50 mm, TX 27x50 mm, TX 30x50 mm 4x 840/4 Z bits: 5/32"x50 mm, 3/16"x50 mm, 7/32"x50 mm, 1/4"x50 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: zyklop speed ratchet set, 1/4 drive, inch (28 -piece) kpn: 8100 SA 9 kpn_dash: kpn_clear: 8100SA9 bkpn: WERA 8100 SA 9 bkpn_clear: WERA 8100SA9 c_path: Home / Tools / Hand tools / Mixed sets / Single sets / Bit and hand socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera mixed sets / Wera single sets / Wera bit and hand socket set | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05004019001 sr_ns: WERA05004019001
r: 41070210 p: 11.34 pid: 70511 b: WERA q: 121 st: 1 lt: 1 ean: 4013288027221 sr: WERA 05006100001 sr_no_br: 05006100001 sr_no_br_cl: 05006100001 sr_cl: WERA05006100001 sr_dash: sold: 1598.94 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 2,5 mm Blade length 80 mm Blade thickness 0,4 mm ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No Drive type Slotted n: WERA 160 i VDE insulated slotted screwdriver, 0.4 x 2.5 x 80 mm - 05006100001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera VDE screwdriver with multi-component Kraftform Plus handle for fast and smooth work: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Conical blade Application Slotted screws Blade Insulated, individually tested as per IEC 60900 Design Conical tip, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 160 i VDE Insulated screwdriver for slotted screws, 0.4 x 2.5 x 80 mm kts: insulated slotted screwdriver, 0.4 x 2.5 x 80 mm kpn: 160 i VDE kpn_dash: kpn_clear: 160iVDE bkpn: WERA 160 i VDE bkpn_clear: WERA 160iVDE c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05006100001 sr_ns: WERA05006100001
r: 87010053 p: 10.578 pid: 73964 b: WERA q: 126 st: 1 lt: 1 ean: 4013288017666 sr: WERA 05053455001 sr_no_br: 05053455001 sr_no_br_cl: 05053455001 sr_cl: WERA05053455001 sr_dash: sold: 1597.278 p_range: none type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Connection size (machine) 1/4" Connection type (machine) Outer hexagon With lock No Magnetic Yes Length 75 mm n: WERA 899/4/1 universal bit holder, 1/4" x 75 mm - 05053455001 cn: BIT HOLDER cn2: BIT HOLDER cn_clear: BITHOLDER d: Product description Universal holder for mounting bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3. Stainless steel sleeve for outstanding corrosion protection. The retaining ring guarantees optimal fit of the tool in the holder. The strong permanent magnet holds the bits firmly. 1/4" hexagon, suitable for machine use with mounting as per DIN ISO 1173-F 6.3. Universal holder for the take-up of bits with 1/4" hexagon head drive Stainless sleeve, retaining ring and strong permanent magnet 1/4" hexagon drive (Wera connecting series 4) Application Suitable for 1/4" DIN ISO 1173-C 6,3 hexagon insert bits and Wera Series 1 Design With stainless steel sleeve, retaining ring, and strong permanent magnet Drive 1/4" hexagon, suitable for power tools with DIN ISO 1173-F 6,3 receiver Features and benefits The retaining ring and the strong permanent magnet ensure a particularly secure fitting of the bit in the holder. ds: dsc: Scope of delivery 899/4/1 Universal Bit Holder, 1/4" x 75 mm kts: universal bit holder, 1/4" x 75 mm kpn: 899/4/1 kpn_dash: kpn_clear: 89941 bkpn: WERA 899/4/1 bkpn_clear: WERA 89941 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Bit holder | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera bit holder sr_no_br_cl_ns: 05053455001 sr_ns: WERA05053455001
r: 41071147 p: 31.239 pid: 71150 b: WERA q: 2 st: 1 lt: 1 ean: 4013288041715 sr: WERA 05006148001 sr_no_br: 05006148001 sr_no_br_cl: 05006148001 sr_cl: WERA05006148001 sr_dash: sold: 1593.189 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved Yes With safety colour code 1000V No Quantity per set 7 Product Range Wera Kraftform n: WERA 160 i/165 i/7 Rack Kraftform Plus series 100 screwdriver set + single-pole phase tester in holder 7-piece - 05006148001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 7-piece screwdriver set with individually tested, insulated screwdrivers as per IEC 60900. Individual testing at 10,000 volts so as to ensure safe working at the permitted voltage of 1,000 volts. Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Partially Lasertip: the tip literally bites itself into the screw head and prevents any slipping. Take it easy Tool Finder: colour coding according to profile and size. The anti-roll feature prevents any bothersome rolling away at the workplace. Including single-pole phase tester and 1 rack for storage. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Kraftform: The safety screwdriver with Lasertip blade, single-pole phase tester and rack. Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted and Pozidriv screws Content 7-piece set and rack in display carton Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Our screwdrivers are tested for dielectric strength under a 10,000 volt load to make sure that their most important property, their insulation, has been exhaustively tested. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. All Kraftform screwdrivers have a non-roll feature at the lower end of the handle. The hexagonal design prevents any annoying rolling away of the screwdriver at the workplace. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 160 i/165 i/7 Rack Screwdriver set Kraftform Plus Series 100, single-pole phase tester and rack, 7 pieces 2x 165 i PZ VDE Insulated screwdriver for Pozidriv screws: PZ 1x80 mm, PZ 2x100 mm 4x 160 i VDE Insulated screwdriver for slotted screws: 0.4x2.5x80 mm, 0.6x3.5x100 mm, 0.8x4x100 mm, 1x5.5x125 mm 1x 247 Single-pole phase tester: 0.5 x 3 x 70 mm kts: Kraftform Plus series 100 screwdriver set + single-pole phase tester in holder 7-piece kpn: 160 i/165 i/7 Rack kpn_dash: kpn_clear: 160i165i7Rack bkpn: WERA 160 i/165 i/7 Rack bkpn_clear: WERA 160i165i7Rack c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05006148001 sr_ns: WERA05006148001
r: 41071079 p: 28.76 pid: 70447 b: WERA q: 81 st: 1 lt: 1 ean: 4013288003133 sr: WERA 05105650001 sr_no_br: 05105650001 sr_no_br_cl: 05105650001 sr_cl: WERA05105650001 sr_dash: sold: 1581.8 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Quantity per set 6 Product Range Wera Kraftform n: WERA 334/6 screwdriver set Kraftform Plus laser tip in holder 6-piece - 05105650001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 6-piece screwdriver set with Kraftform Plus handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Partially Lasertip: the tip literally bites into the head of the screw and thereby prevents any slipping out of the screw head. Take it easy Tool Finder: colour coding according to profile and size. The hexagonal anti--roll feature prevents any bothersome rolling away at the workplace. Includes practical rack for tidy storage of the screwdrivers. Screwdriver for slotted and cross-recess screws, Phillips Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Lasertip round blades and rack. Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted and Phillips screws Content 6-piece set and rack in display carton Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 334/6 Rack Screwdriver set Kraftform Plus Lasertip and rack, 6 pieces 2x 350 PH Screwdriver for Phillips screws: PH 1x80 mm, PH 2x100 mm 1x 334 Screwdriver for slotted screws: 1.2 x 6.5 x 150 mm 3x 335 Screwdriver for slotted screws: 0.5x3x80 mm, 0.8x4x100 mm, 1x5.5x125 mm kts: screwdriver set Kraftform Plus laser tip in holder 6-piece kpn: 334/6 kpn_dash: kpn_clear: 3346 bkpn: WERA 334/6 bkpn_clear: WERA 3346 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05105650001 sr_ns: WERA05105650001
r: 02098337 p: 39.504 pid: 44123 b: WERA q: 3 st: 1 lt: 1 ean: 4013288118226 sr: WERA 05223161001 sr_no_br: 05223161001 sr_no_br_cl: 05223161001 sr_cl: WERA05223161001 sr_dash: sold: 1580.16 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive type Torx VDE approved No With safety colour code 1000V No Supplied in Storage box Quantity per set 7 Product Range Wera Kraftform n: WERA 367/7 TORX HF Kraftform Plus screwdriver set with holding function in holder 7-piece - 05223161001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 7-piece screwdriver set for TORX® screws. Multi-component Kraftform handle for fast and low-fatigue working. Comes with holding function: the wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screw on the tool. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Handle markings for simplified finding and sorting of the tool. Screwdriver for TORX® screws; holding function Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Holding function for TORX® screws, chrome-plated Application TORX®, with holding function for TORX® screws made according to Acument Intellectual Properties specifications Content 7-piece set and rack in display carton Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. ds: dsc: Scope of delivery 367/7 TORX® HF Kraftform Plus Screwdriver set with holding function and rack, 7 pieces 7x 367 TORX® HF Screwdriver with holding function for TORX® screws: TX 8x60 mm, TX 10x80 mm, TX 15x80 mm, TX 20x100 mm, TX 25x100 mm, TX 27x115 mm, TX 30x115 mm kts: Kraftform Plus screwdriver set with holding function in holder 7-piece kpn: 367/7 TORX HF kpn_dash: kpn_clear: 3677TORXHF bkpn: WERA 367/7 TORX HF bkpn_clear: WERA 3677TORXHF c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05223161001 sr_ns: WERA05223161001
r: 02611092 p: 9.276 pid: 44316 b: WERA q: 25 st: 1 lt: 1 ean: 4013288157515 sr: WERA 05057665001 sr_no_br: 05057665001 sr_no_br_cl: 05057665001 sr_cl: WERA05057665001 sr_dash: sold: 1576.92 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T25 Drive profile size (bit) 25 n: WERA 867/4 IMP DC TORX DIY bit, TX 25 x 50 mm - 05057665001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX® screws. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle coating on the bit tip, prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For recessed TORX® screws Impaktor technology for above-average service life Particularly suitable for use with customary impact drivers Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out 1/4" hexagon drive (Wera connecting series 4) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design The Impaktor technology ensures an above-average service life even under extreme conditions thanks to a best-possible utilisation of the material properties and optimally designed geometry, particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance. Take it easy tool finder: Output colour coding (green = TORX®) and large stamp to enable the desired bit to be easily located. Features and benefits For an above-average service life. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Another product advantage is the coating of the Impaktor bits with minute diamond particles. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. For use with impact screwdrivers. Improve productivity when screwdriving with power tools. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Particularly high strength. Reduce the danger of premature bit breakage. Torsion zone specially designed to absorb such forces and thereby protect the bit tip. Another product advantage is the coating of the Impaktor bits with minute diamond particles. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 1x 867/4 IMP DC Impaktor TORX® Bit: TX 25 x 50 mm kts: bit, TX 25 x 50 mm kpn: 867/4 IMP DC TORX DIY kpn_dash: kpn_clear: 8674IMPDCTORXDIY bkpn: WERA 867/4 IMP DC TORX DIY bkpn_clear: WERA 8674IMPDCTORXDIY c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Promotions / Promotions / Black friday / Black friday hand tools / Black friday hand tools bit set | Home / Promotions / Promotions / Black friday / Wera black friday / Wera black friday hand tools sr_no_br_cl_ns: 05057665001 sr_ns: WERA05057665001
r: 87011025 p: 26.28 pid: 19792 b: WERA q: 1 st: 1 lt: 1 ean: 4013288180018 sr: WERA 05057415001 sr_no_br: 05057415001 sr_no_br_cl: 05057415001 sr_cl: WERA05057415001 sr_dash: sold: 1576.8 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Torx Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 7 Product Range Wera Bit-Check n: WERA Bit-Check 7 TX Diamond 1 screwdriver bit set 7-piece - 05057415001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description Bits with tiny diamond particles on the bit tip. This ensures a secure fit in the screw head, reduces the contact pressure required and lowers the risk of slipping. BiTorsion bits with a torsion zone - where kinetic energy is diverted from peak loads. This greatly extends the product service life. Comes with Rapidaptor technology, which allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward - for rapid bit change with just one hand. For insertion in the power screwdriver or into the chuck of the power drill. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera Take it easy Tool Finder with its colour coding and clearly visible imprint. Upright positionable Bit-Checks convince due to their functionality in a minimum of space BiTorsion bits for long service life Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out Rapidaptor holder for rapid bit change Take it easy tool finder: colour coding according to profile and size 1 bit holder Rapidaptor with quick-release chuck, 6 BiTorsion bits for long service life, diamond-coated (BDC) for secure screw fit. The Take it easy Bit-Checks have bits with a sleeve which - from its colour and size designation - make it simple to access the right bit quickly. Features and benefits The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The diamond coating of the DC bits lowers the danger of slipping as the minute diamond particles literally "bite" themselves into the screw head. Today, the Wera diamond bit - manufactured with the technology specifically developed by Wera for this application - still sets the standard in terms of resilience and functionality. Wera bits with a diamond coating ensure a secure fit of the bit in the screw head. The minute diamond particles applied to the tip of the tool literally "bite" into the screw and ensure an exact, anti-slip fit in the head of the screw. This secure fit protects the screw. The cam-out forces which compel the user to apply greater pressure to the screw are considerably reduced. Ideal for sensitive materials Lightning-fast bit change without any extra tools. One-handed operation. With fast-rotating sleeve for easy wielding of the screwdriver. The Take it easy Bit-Checks have bits with a sleeve which - from its colour (e.g. red = Phillips) and size designation - make it simple to access the right bit quickly. ds: dsc: Scope of delivery Bit-Check 7 TX Diamond 1, 7 pieces 1x 889/4/1 K Rapidaptor Universal Bit Holder: 1/4" x 50 mm 6x 867/1 BDC TORX® bits: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 30x25 mm, TX 40x25 mm kts: screwdriver bit set 7-piece kpn: Bit-Check 7 TX Diamond 1 kpn_dash: Bit kpn_clear: BitCheck7TXDiamond1 bkpn: WERA Bit-Check 7 TX Diamond 1 bkpn_clear: WERA BitCheck7TXDiamond1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05057415001 sr_ns: WERA05057415001
r: 03229761 p: 221.157 pid: 69767 b: WERA q: 0 st: lt: 7 ean: 4013288217561 sr: WERA 05075681001 sr_no_br: 05075681001 sr_no_br_cl: 05075681001 sr_cl: WERA05075681001 sr_dash: sold: 1548.099 p_range: KLIUM_PRODUCT_RANGE_304 type: standard act: 1 avo: 1 av: Min. tightening torque 40 Nm Max. tightening torque 200 Nm Drive profile size 1/2" Adjustable torque range 40-200 Nm Product Range Wera Click-Torque n: WERA Click-Torque C 3 Set 2 screwdriver tool set for screws in concrete construction 40-200 Nm, 11-piece - 05075681001 cn: TORQUE WRENCH SET cn2: TORQUE WRENCH SET cn_clear: TORQUEWRENCHSET d: Product description 11-piece set for fitting security-relevant cement screws with defined torque moments as per screw manufacturer instructions. With Take it easy tool finder with colour coding and size stamping - for easy and fast location of the required tool. For fitting security-relevant cement screws with defined torque moments as per screw manufacturer instructions Click-Torque C 3 torque wrench with reversible ratchet (measuring range: 40-200 Nm; precision ± 3 % as per DIN EN ISO 6789-1:2017-07) 8790 C Impaktor socket wrench inserts for the application with compressed air or electrically driven impact wrenches with 12.5 mm = 1/2" drive (13 mm to 21 mm) Extension 8894 SC, short, 1/2" with cross-bore and the ring socket to secure the locking ring/locking pin of machine operated tools 11-piece set in premium textile tool box 11-piece set; in a surface-preserving, compact and extremely robust textile box. Low volume and weight for simplified mobility. 1 Click-Torque C 3 torque wrench with reversible ratchet with 1/2"-square head-drive, measuring range 40 Nm-200 Nm, accuracy ±3 % of the set value, as per DIN EN ISO 6789-1:2017-07, for clockwise torque control, reversible ratchet , 45 teeth, easy setting and saving of the desired torque value, with audible and tactile locking when the scale values are reached (fine scale only in Newton meters), audible and tactile release mechanism when the set torque value is reached, ergonomic 2-component handle; 9 Impaktor 8790 C socket wrench inserts and 1 short extension 8894 SC for the use with electric and cordless screwdrivers (not with impact wrenches). Features and benefits The tool set is particularly suitable for fitting security-relevant cement screws with defined torque moments as per screw manufacturer instructions. The Impaktor technology ensures above-average service life of the Impaktor socket wrench plug-ins even under extreme conditions. Thanks to the hole and the ring socket, the tools can be held securely on the power tool with a safety pin or an O-ring. Click torque wrench in unmistakable Wera design. Precision of ±3 % as per DIN EN ISO 6789-1:2017-07. Easy setting and saving of the desired torque value; easy to read on main and fine scales. With audible and tactile locking when the scale values are reached. On reaching the desired torque value, an audible and tactile mechanism is triggered. ds: dsc: Scope of delivery Click-Torque C 3 set 2 for cement screwdriving, 40-200 Nm, 11 pieces 1x Click-Torque C 3 torque wrench with reversible ratchet, 40-200 Nm: 1/2" x 40-200 Nm 9x 8790 C Impaktor socket with 1/2" drive: 13x38 mm, 14x38 mm, 15x38 mm, 16x38 mm, 17x38 mm, 18x38 mm, 19x38 mm, 20x38 mm, 21x38 mm 1x 8894 SC extension, short, 1/2": 1/2" x 125 mm kts: screwdriver tool set for screws in concrete construction 40-200 Nm, 11-piece kpn: Click-Torque C 3 Set 2 kpn_dash: Click kpn_clear: ClickTorqueC3Set2 bkpn: WERA Click-Torque C 3 Set 2 bkpn_clear: WERA ClickTorqueC3Set2 c_path: Home / Tools / Hand tools / Torque tools / Sets / Torque wrench set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera sets / Wera torque wrench set | Home / Our brands / Wera / Wera Ranges / Wera click-torque sr_no_br_cl_ns: 05075681001 sr_ns: WERA05075681001
r: 02953293 p: 108.925 pid: 31161 b: WERA q: 0 st: lt: 8 ean: 4013288204387 sr: WERA 05136026001 sr_no_br: 05136026001 sr_no_br_cl: 05136026001 sr_cl: WERA05136026001 sr_dash: sold: 1524.95 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 15 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt SH 2 plumbing/heating tool kit 15-piece - 05136026001 cn: TOOL SET cn2: TOOL SET cn_clear: TOOLSET d: Product description Compact tool set with 15 important screwdriving tools for the sanitary and heating sectors. With 2 Joker Switch ratcheting combination wrenches, VDE handle with 4 extra-slim blades, voltage tester, 4 L-keys with thermoplastic sleeve, chiseldriver and 2 Kraftform Plus nutspinners with hollow shaft. The details: 2 Joker Switch ratcheting combination wrenches with special retaining plate to prevent slipping/loss of the screw and more torque transfer; one Kraftform 817 VDE bladeholding screwdriver solely for Wera VDE blades; 4 VDE blades (each 157 mm length) with Take it easy tool finder with colour coding by profile and laser-engraved size indication; for safe working at up to 1000 volts (iS with reduced blade diameter and integrated protective insulation for reaching and operating low-lying screw and spring elements); 1 single-pole phase tester 247; 4 L-keys with Hex-Plus profile to prevent rounding out screws; 1 Kraftform chiseldriver 932 A (slotted) with pound-thru hexagonal blade and integrated impact cap for screwdriving and light chiselling; 2 socket wrench nutspinners 395 HO with hollow shaft for tightening or loosening nuts on protruding threaded rods as well as fixed screws. Including tools with Take it easy tool finder with colour coding in accordance to profiles and size stamping - for fast and easy tool selection. 15 screwdriving tools for sanitary or heating applications in compact and robust Wera textile box JOKER combination ratcheting wrench with special holding plate against slipping/loss of the screw VDE-insulated Kraftform 817 VDE bladeholding screwdriver with anti-roll protection VDE blades (157 mm length) with practical spinning function, anti-roll protection and Take it easy tool finder: colour coding by profile and laser-engraved size indication Kraftform Chiseldriver with hex blade extending through handle and integrated impact cap 15-piece set; in a surface-preserving, compact and extremely robust textile box; low volume and weight for simplified mobility.1 Kraftform chiseldriver 932 A (slotted) with pound-thru hexagonal blade and integrated impact cap for screwdriving and light chiselling; 2 socket wrench screwdrivers 395 HO with hollow shaft for tightening or loosening nuts on protruding threaded rods as well as fixed screws; One Kraftform 817 VDE bitholding screwdriver solely for Wera VDE blades; 4 VDE blades (each 157 mm length) with Take it easy toolfinder with colour coding by profile and laser-engraved size indication; with reduced blade diameter and integrated protective insulation, so low-lying screws can be accessed, individually tested as per IEC 60900; 1 single-pole phase tester 247, 2 Joker Switch ratcheting combination wrenches with holding function for nuts and bolts, protecting against slippage, double hexagon geometry and extremely hard tips on the metal plate to protect against slippage at high torques, with a small return angle of 30°, switch lever for a comfortable direction change, ring end angled at 15° from the handle; 4 L-keys with Hex-Plus profile (prevents the rounding of hexagon socket screws), with holding function for hexagon socket screws, hexagonal ball-end on the long arm, BlackLaser surface, plastic sleeve, all L-keys are easily identified by their colour coding and size marking. Features and benefits Compact tool set with 15 important screwdriving tools for the sanitary and heating sectors. Compact tool set with the 15 most important screwdriving tools for plumbing and heating applications. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. The chiseldriver is the solution for jobs that require more than just screwdriving. For fastening, chiselling and loosening seized screws or hose clamps. With an integrated impact cap that extends service live and reduces the risk of splintering. With a pound-thru hexagon blade made from high-grade material for - zero-loss transfer of high forces when struck with a hammer. The tough viscous tempered material prevents the blade from splintering or breaking. More TORQUE can be transferred by attaching an open-jawed or ring spanner to the integrated hexagon bolster. A screwdriver with a hollow shaft is needed whenever there are screwdriving jobs involving threaded rods i.e. the threaded rod can slip into the hollow shaft of the nutsetter. The Kraftform Kompakt VDE blades are equipped with the Take it easy Tool finder. The colour coding by profile and the laser-engraved size indication make it easy to identify the required tool quickly. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. ds: dsc: Scope of delivery Kraftform Kompakt SH 2 PlumbKit, 15 pieces 2x 395 HO Nutdriver: 10x90 mm, 13x90 mm 1x 932 A Screwdriver for slotted screws: 1.2 x 7 x 125 mm 2x 6001 Joker Switch Ratcheting combination wrench, with switch lever: 10x159 mm, 13x179 mm 4x 950 SPKL HF L-key Multicolour, metric, with holding function: 3x123 mm, 4x137 mm, 5x154 mm, 6x172 mm 1x 817 VDE Kraftform blade-holding handle: 9 x 98 mm 2x Kraftform Kompakt VDE 62 iS Take it easy: PH 1x157 mm, PH 2x157 mm 2x Kraftform Kompakt VDE 60 iS Take it easy: 0.6x3.5x157 mm, 1x5.5x157 mm 1x 247 Single-pole phase tester: 0.5 x 3 x 70 mm 1x Hook and Loop Fastener Strip 240: 50 x 240 mm kts: plumbing/heating tool kit 15-piece kpn: Kraftform Kompakt SH 2 kpn_dash: kpn_clear: KraftformKompaktSH2 bkpn: WERA Kraftform Kompakt SH 2 bkpn_clear: WERA KraftformKompaktSH2 c_path: Home / Tools / Hand tools / Mixed sets / Single sets / Tool set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera mixed sets / Wera single sets / Wera tool set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05136026001 sr_ns: WERA05136026001
r: 02798475 p: 41.157 pid: 43774 b: WERA q: 3 st: 1 lt: 1 ean: 4013288174062 sr: WERA 05004064001 sr_no_br: 05004064001 sr_no_br_cl: 05004064001 sr_cl: WERA05004064001 sr_dash: sold: 1522.809 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Length 281 mm Drive profile size 1/2" Non-sparking No VDE approved No With safety colour code 1000V No Product Range Wera Zyklop n: WERA 8004 C Zyklop Metal ratchet with shuttle lever with 1/2" drive (1/2" x 281 mm) - 05004064001 cn: RATCHET SPANNER cn2: RATCHET SPANNER cn_clear: RATCHETSPANNER d: Product description Zyklop Metal ratchet with switchover lever. Slim design for work in even very confined spaces. The 72 fine-pitched teeth allow a small return angle of 5°. Comes with a switchover lever for convenient direction change and secure socket locking function. Forged, full metal ratchet (chrome-molybdenum steel) for particularly high robustness and long service life. Convenient direction change thanks to switchover lever Extremely slim ratchet with long lever Return angle of only 5° Secure socket locking For 1/2" square sockets with ball lock Application 1/2" square sockets as well as for 1/2" adaptors with square drive, with ball locking device Design Forged, full metal ratchet (chrome-molybdenum) that is extremely robust with a long service life; slim design to enable work in very confined spaces; fine-tooth mechanism with 72 teeth for a return angle of only 5°; switch lever for convenient change of direction; secure socket locking function Features and benefits Due to the ever-more confined working environment, space is becoming more and more an issue for the application of ratchets. Our product developers therefore intensively occupied themselves with the issue of confined working spaces, and Wera has now solved this problem. The extremely slim and robust Zyklop Metal ratchet with a long lever was what emerged. When the change in direction needs to be quick, the Zyklop Metal Switch ratchet is the right tool. When the socket must not get lost and a coincidental change of direction has to be avoided at all cost, the Zyklop Metal Push is the correct choice. Forged, full metal ratchet (chrome-molybdenum) that is extremely robust with a long service life; slim design to enable work in very confined spaces. Switch lever for convenient change of direction. Fine-pitched with 72 teeth for a return angle of only 5° The ball lock ensures sockets and accessories fit securely, providing increased safety during operation. A short press on the release button allows the tool to be changed quickly. ds: dsc: Scope of delivery 8004 C Zyklop Metal Ratchet with switch lever and 1/2" drive, 1/2" x 281 mm kts: Zyklop Metal ratchet with shuttle lever with 1/2" drive (1/2" x 281 mm) kpn: 8004 C kpn_dash: kpn_clear: 8004C bkpn: WERA 8004 C bkpn_clear: WERA 8004C c_path: Home / Tools / Hand tools / Sockets and ratchets / Ratchets / Ratchet spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera ratchets / Wera ratchet spanner | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05004064001 sr_ns: WERA05004064001
r: 02830298 p: 35.371 pid: 42311 b: WERA q: 0 st: lt: 13 ean: 4013288168115 sr: WERA 05073645001 sr_no_br: 05073645001 sr_no_br_cl: 05073645001 sr_cl: WERA05073645001 sr_dash: sold: 1520.953 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Type of drive profile (bit) Mixed; Phillips; Pozidriv; Torx; Hexagon VDE approved No ESD No Quantity per set 10 Product Range Wera Bit-Check n: WERA Bit-Check 10 Zyklop Mini 1 screwdriver bit set 10-piece - 05073645001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Many tools in a minimum of space. The sorting according to drive and size allows rapid accessing of the bits. The Wera Mini ratchet: drop-forged, full-steel design. Fine-pitched mechanism with 60 teeth that allows a small return angle of only 6° for precise work. Simple left/right switchover. Ergonomically-designed ratchet head and lever. 1/4" Mini ratchet and tough viscous bits Ideal for working in confined spaces Tough viscous bits for universal use Use of 1/4" sockets also possible with the Wera adaptor 870/1 In handy and robust Bit-Check 9 bits, tough, for universal use, 1 Wera Bit Ratchet Zyklop Mini 1, drop-forged full steel design, suitable for 1/4" hex bits as per DIN ISO 1173-C 6.3 and E 6.3 and Wera series 1 and 4. Can also be used with 1/4" sockets by using the Wera socket adaptor 870/1. Features and benefits Zyklop Mini For all difficult-to-access applications. The fine tooth mechanism, with its 60 teeth, allows a small return angle of only 6° - ideal for precision work. Simple switching between left/right operations. High working speeds can be attained with the Zyklop Mini bit ratchet. The thumb wheel is important, enabling more rapid screwdriving, and the lever of the Zyklop Mini only needs to be used for the final tightening of the screw. Its slim design makes it ideal for all particularly confined working situations. The Zyklop Mini 1 can withstand a torque up to 65 Nm. That is far more power than can normally be transferred to such a small tool. Bits and sockets. Bits can be connected directly. However, a holder can be connected first and then the bit can be attached to this. This then serves as an extension with a free-turning sleeve. An adaptor e.g. Wera 870/1 is needed for sockets - 1/4" hexagonal on a square drive (included in the Bit-Check and with the individual Zyklop Mini 1 in the set). ds: dsc: Scope of delivery Bit-Check 10 Zyklop Mini 1, 10 pieces 1x 8001 A Bit Ratchet 1/4": 1/4" x 87 mm 2x 851/1 Z bits: PH 1x25 mm, PH 2x25 mm 2x 855/1 Z bits: PZ 1x25 mm, PZ 2x25 mm 3x 867/1 TORX® bits: TX 15x25 mm, TX 20x25 mm, TX 25x25 mm 2x 840/1 Z bits: 4x25 mm, 5x25 mm kts: screwdriver bit set 10-piece kpn: Bit-Check 10 Zyklop Mini 1 kpn_dash: Bit kpn_clear: BitCheck10ZyklopMini1 bkpn: WERA Bit-Check 10 Zyklop Mini 1 bkpn_clear: WERA BitCheck10ZyklopMini1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05073645001 sr_ns: WERA05073645001
r: 41071294 p: 65.95 pid: 71876 b: WERA q: 0 st: lt: 9 ean: 4013288115713 sr: WERA 05071116001 sr_no_br: 05071116001 sr_no_br_cl: 05071116001 sr_cl: WERA05071116001 sr_dash: sold: 1516.85 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder type Internal hex VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 17 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 60 Stainless screwdriver handle with stainless steel change blades in belt pouch 17-piece - 05071116001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Pouch with bits in a length of 89 mm. Includes Kraftform holder 3816 R with Rapidaptor quick-release chuck and multi-component Kraftform handle for low-fatigue working. Stainless design to prevent the formation of extraneous rust. Solution to the extraneous rust problem: fasten stainless screws with stainless tools Vacuum ice-hardening provides the required hardness and strength Handle/Interchangeable blade system for rapid exchange of the blade Rapidaptor technology for rapid bit change Storage and transport in a robust belt pouch Pouch with 89 mm bits, stainless steel17-piece set1 Kraftform stainless bitholding screwdriver 3816 R with Rapidaptor quick-release chuck Features and benefits Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The tools can be stored and carried in a robust belt pouch, keeping them always to hand. ds: dsc: Scope of delivery Kraftform Kompakt 60, stainless, 17 pieces 1x 3816 R Bitholding screwdriver with Rapidaptor quick-release chuck, stainless: 1/4" x 119 mm 3x 3851/4 Bits, stainless: PH 1x89 mm, PH 2x89 mm, PH 3x89 mm 3x 3855/4 Bits, stainless: PZ 1x89 mm, PZ 2x89 mm, PZ 3x89 mm 5x 3867/4 TORX® BO bits with bore hole, stainless: TX 10x89 mm, TX 15x89 mm, TX 20x89 mm, TX 25x89 mm, TX 30x89 mm 1x 3800/4 Bits, stainless: 1 x 5.5 x 89 mm 4x 3840/4 Bits, stainless: 3x89 mm, 4x89 mm, 5x89 mm, 6x89 mm kts: screwdriver handle with stainless steel change blades in belt pouch 17-piece kpn: Kraftform Kompakt 60 Stainless kpn_dash: kpn_clear: KraftformKompakt60Stainless bkpn: WERA Kraftform Kompakt 60 Stainless bkpn_clear: WERA KraftformKompakt60Stainless c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05071116001 sr_ns: WERA05071116001
