r: 03166697 p: 11.9 pid: 33830 b: WERA q: 1 st: 1 lt: 1 ean: 4013288212719 sr: WERA 05020206001 sr_no_br: 05020206001 sr_no_br_cl: 05020206001 sr_cl: WERA05020206001 sr_dash: sold: 130.9 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 15 mm Length 174 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (15 x 174 mm) - 05020206001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 15 x 174 mm kts: ring spanner (15 x 174 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020206001 sr_ns: WERA05020206001
r: 02828948 p: 25.785 pid: 42940 b: WERA q: 0 st: lt: 8 ean: 4013288183910 sr: WERA 05020066001 sr_no_br: 05020066001 sr_no_br_cl: 05020066001 sr_cl: WERA05020066001 sr_dash: sold: 128.925 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 11 mm Overall length 165 mm Product Range Wera Joker n: WERA 6001 Joker Switch socket and ring spanner, switchable, 11 x 165 mm - 05020066001 cn: RATCHET COMBINATION SPANNER cn2: RATCHET COMBINATION SPANNER cn_clear: RATCHETCOMBINATIONSPANNER d: Product description Joker ratcheting combination wrenches with angled ratchet head and switch lever. The metal plate in the jaw provides for the holding function which reduces the risk of losing nuts and bolts. The integrated limit stop can prevent any slipping from the bolt head downwards and enables higher torque to be applied. The exchangeable metal plate in the jaw securely holds nuts and bolts with its extra hard teeth and reduces the risk of slipping. The double-hex geometry delivers a very positive connection with nuts or bolts and again provides for a lower risk of any slipping. The low return angle of only 30° at the jaw end avoids any time-consuming flipping of the wrench when fastening. The reversible ratchet mechanism at the ring end with its fine toothing (80 teeth) ensures great flexibility even in confined spaces. Audibly precise ratchet mechanism. Additionally, the robust two-piece locking element provides for an extreme stability. Comes with a 15° tilted ratchet end for secure work even at high torque. The special forged geometry allows for high torque transfer and high flexural rigidity. Manufactured out of high-performance chrome-molybdenum steel with a nickel-chromium coating for high corrosion protection. With Take it easy tool finder: colour coding according to size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping Very fine toothing and robust locking element Ratchet end tilted by 15° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench, switch lever for convenient change of direction; ring end tilted at 15° from the handle Features and benefits With the Joker you can now loosen, lock and tighten screws and bolts in situations where conventional tools fail. That's why the Joker is smarter. Plus, it cuts a damn good figure in every position. The direction of the fine-tooth ratchet mechanism can easily be changed via the smooth switch lever. The ratchet end is tilted at 15° to the tool axis, making application of the tool in confined spaces much easier. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6001 Joker Switch Ratcheting combination wrench, with switch lever, 11 x 165 mm kts: socket and ring spanner, switchable, 11 x 165 mm kpn: 6001 Joker Switch kpn_dash: kpn_clear: 6001JokerSwitch bkpn: WERA 6001 Joker Switch bkpn_clear: WERA 6001JokerSwitch c_path: Home / Tools / Hand tools / Keys / Keys / Ratchet combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratchet combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020066001 sr_ns: WERA05020066001
r: 03176902 p: 24.628 pid: 31409 b: WERA q: 0 st: lt: 8 ean: 4013288218865 sr: WERA 05020504001 sr_no_br: 05020504001 sr_no_br_cl: 05020504001 sr_cl: WERA05020504001 sr_dash: sold: 123.14 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 27 mm Length 300 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (27 x 300 mm) - 05020504001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 27 x 300 mm kts: ring spanner (27 x 300 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020504001 sr_ns: WERA05020504001
r: 03176907 p: 17.024 pid: 33861 b: WERA q: 0 st: lt: 15 ean: 4013288218797 sr: WERA 05020500001 sr_no_br: 05020500001 sr_no_br_cl: 05020500001 sr_cl: WERA05020500001 sr_dash: sold: 119.168 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 20 mm Length 230 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (20 x 230 mm) - 05020500001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 20 x 230 mm kts: ring spanner (20 x 230 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020500001 sr_ns: WERA05020500001
r: 03228385 p: 23.471 pid: 31580 b: WERA q: 0 st: lt: 8 ean: 4013288194473 sr: WERA 05136461001 sr_no_br: 05136461001 sr_no_br_cl: 05136461001 sr_cl: WERA05136461001 sr_dash: sold: 117.355 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Accessory/Part type Roll-up pouch Product Range Wera Joker n: WERA 9412 textile box for 6001 Joker Switch 11, empty, 180 x 88 x 46 mm - 05136461001 cn: ACCESSORY/PART WRENCH cn2: ACCESSORY/PART WRENCH cn_clear: ACCESSORYPARTWRENCH d: Product description Robust box for space-saving tool storage; ideal for mobile use, as the material used is light and firm; for Joker Switch spanner; 11 loops; empty. Robust material Strong hook and loop fastener system to prevent unintentional opening and therefore loss of the tool Compact design for space-saving storage Low weight for easy transport Compatible with Wera 2go Features and benefits The material used is distinguished by its high level of robustness. At the same time, the textile box is light and rigid. Even if the textile box falls down, the tools are well protected. The mesh pouches hold the tools securely and reliably. The size marking can be seen through the mesh material. The textile box features a fleece zone at the back. Using the provided self-adhesive hook and loop fastener strips, the textile box can be attached to the Wera 2go components. Or to the wall, shelf or workshop trolley. ds: dsc: Scope of delivery 9412 Textile Box 6001 for 11 Joker Switch, empty, 180 x 88 x 46 mm kts: textile box for 6001 Joker Switch 11, empty, 180 x 88 x 46 mm kpn: 9412 kpn_dash: kpn_clear: 9412 bkpn: WERA 9412 bkpn_clear: WERA 9412 c_path: Home / Tools / Hand tools / Keys / Accessories and spare parts / Accessory/part wrench | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera accessories and spare parts / Wera accessory/part wrench | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05136461001 sr_ns: WERA05136461001
r: 08085442 p: 26.611 pid: 69965 b: WERA q: 0 st: lt: 8 ean: 4013288225498 sr: WERA 05137330001 sr_no_br: 05137330001 sr_no_br_cl: 05137330001 sr_cl: WERA05137330001 sr_dash: sold: 106.444 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Length 392 mm Width 172 mm Product Range Wera Joker n: WERA 9830 foam insert for 6000 Joker Set 1, without tools, 172 x 30 x 392 mm - 05137330001 cn: TOOL TRAY INSERT cn2: TOOL TRAY INSERT cn_clear: TOOLTRAYINSERT d: Product description One durable foam insert, without tools; two-coloured for quick identification of missing parts; width x height x depth: 172 x 30 x 392 mm; spare foam insert for Wera item 9730; suitable for the Tool Rebel roller cabinet. Durable foam insert, each tool has its own place; two-coloured, missing tools will quickly be noticed High-quality, durable foam insert without chemical vapours Optimum fit for the best possible removal of the tools from the foam insert Water- and oil-repellent, low maintenance and easy to clean Protection of the tool from dirt and impact One durable foam insert, without tools; two-coloured for quick identification of missing parts; width x height x depth: 172 x 30 x 392 mm; spare insert for Wera item 9730; suitable for the Tool Rebel roller cabinet. Features and benefits The tools sit securely in the foam thanks to precise contour cutouts, but are easy to remove. The carefully designed arrangement of the tools ensures space-saving storage and quick access to each tool. After removing the tool the light grey second foam becomes visible and therefore missing tools are quickly identified. ds: dsc: Scope of delivery 9830 Foam insert 6000 Joker Set 1, empty, 172 x 30 x 392 mm kts: foam insert for 6000 Joker Set 1, without tools, 172 x 30 x 392 mm kpn: 9830 kpn_dash: kpn_clear: 9830 bkpn: WERA 9830 bkpn_clear: WERA 9830 c_path: Home / Corporate and environmental facilities / Workshop furniture & tooling / Accessories and parts fixed and mobile furniture / Tool tray insert | Home / Our brands / Wera / Wera corporate and environmental facilities / Wera workshop furniture & tooling / Wera accessories and parts fixed and mobile furniture / Wera tool tray insert | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05137330001 sr_ns: WERA05137330001
r: 03176912 p: 7.603 pid: 32966 b: WERA q: 1 st: 1 lt: 1 ean: 4013288218780 sr: WERA 05020198001 sr_no_br: 05020198001 sr_no_br_cl: 05020198001 sr_cl: WERA05020198001 sr_dash: sold: 106.442 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 6 mm Length 105 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (6 x 105 mm) - 05020198001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 6 x 105 mm kts: ring spanner (6 x 105 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020198001 sr_ns: WERA05020198001
r: 03176911 p: 8.099 pid: 32960 b: WERA q: 0 st: lt: 15 ean: 4013288220097 sr: WERA 05020219001 sr_no_br: 05020219001 sr_no_br_cl: 05020219001 sr_cl: WERA05020219001 sr_dash: sold: 105.287 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 9 mm Length 120 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (9 x 120 mm) - 05020219001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 9 x 120 mm kts: ring spanner (9 x 120 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020219001 sr_ns: WERA05020219001
r: 02828853 p: 97.19 pid: 42689 b: WERA q: 0 st: lt: 12 ean: 4013288167460 sr: WERA 05073295001 sr_no_br: 05073295001 sr_no_br_cl: 05073295001 sr_cl: WERA05073295001 sr_dash: sold: 97.19 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Type of drive profile Hexagonal Smallest size 7/16 inch Largest size 3/4 inch Supplied in Case Quantity per set 4 Product Range Wera Joker n: WERA 6000 Joker 4 Imperial Set 1 socket and ratchet spanner set, Inch, 4-piece - 05073295001 cn: RATCHETING COMBINATION SPANNER SET cn2: RATCHETING COMBINATION SPANNER SET cn_clear: RATCHETINGCOMBINATIONSPANNERSET d: Product description High quality combination ratchet wrench set by Wera: everything that a wrench has to be able to do. And a whole lot more. Faster, better, stylish. Yes, a real Joker. The new generation of combination ratchet wrenches. 4-piece set with imperial sizes in a robust pouch. Suitable for hexagon bolt heads or nuts. Comes with a holding function, thanks to the metal plate in the jaw, which reduces the risk of dropping nuts and bolts. The replaceable metal plate in the jaw secures nuts and bolts with its extra hard teeth and limits the danger of slipping. The integrated limit stop prevents any slipping down around the bolt head and allows higher torque to be applied. The double-hex geometry makes for a positive connection with nuts or bolts and reduces the risk of slipping. A return angle of only 30° at the open end prevents any time consuming flipping of the wrench during fastening jobs. The ratchet mechanism at the ring end, with an exceptional, fine-tooth mechanism - 80 teeth in all - enables flexibility even in very confined working spaces. The specially forged geometry provides for high torque transfer and strength. Manufactured out of high performance chrome molybdenum steel with a nickel-chrome coating for high corrosion protection. Take it easy Tool Finder with colour coding according to sizes Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping The double-hex geometry reduces the risk of slipping Return angle of only 30° With Take it easy tool finder: colour coding by size Set of ratcheting combination wrenches4-piece setIn robust pouch Features and benefits With the Joker you can now loosen, lock and tighten screws and bolts in situations where conventional tools fail. That's why the Joker is smarter. Plus, it cuts a damn good figure in every position. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). When we began to think about open-ended wrenches, we asked ourselves: why does the wrench always have to be flipped over; why does it have an offset design; why does it slip off injuring fingers? The new design of the open end resulted in a real "Joker" that works even when all other trumps have been played. ds: dsc: Scope of delivery 6000 Joker 4 Imperial Set 1 Ratcheting combination wrenches set, Imperial, 4 pieces 4x 6000 Joker Ratcheting combination wrenches, Imperial: 7/16"x165 mm, 1/2"x177 mm, 9/16"x188 mm, 3/4"x246 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: socket and ratchet spanner set, Inch, 4-piece kpn: 6000 Joker 4 Imperial Set 1 kpn_dash: kpn_clear: 6000Joker4ImperialSet1 bkpn: WERA 6000 Joker 4 Imperial Set 1 bkpn_clear: WERA 6000Joker4ImperialSet1 c_path: Home / Tools / Hand tools / Keys / Sets / Ratchet combination spanner set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera ratchet combination spanner set | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05073295001 sr_ns: WERA05073295001
r: 03166689 p: 8.099 pid: 33821 b: WERA q: 1 st: 1 lt: 1 ean: 4013288212542 sr: WERA 05020201001 sr_no_br: 05020201001 sr_no_br_cl: 05020201001 sr_cl: WERA05020201001 sr_dash: sold: 97.188 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 10 mm Length 125 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (10 x 125 mm) - 05020201001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 10 x 125 mm kts: ring spanner (10 x 125 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020201001 sr_ns: WERA05020201001
r: 02828949 p: 31.239 pid: 42269 b: WERA q: 0 st: lt: 8 ean: 4013288183927 sr: WERA 05020067001 sr_no_br: 05020067001 sr_no_br_cl: 05020067001 sr_cl: WERA05020067001 sr_dash: sold: 93.717 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 12 mm Overall length 171 mm Product Range Wera Joker n: WERA 6001 Joker Switch socket and ring spanner, switchable, 12 x 171 mm - 05020067001 cn: RATCHET COMBINATION SPANNER cn2: RATCHET COMBINATION SPANNER cn_clear: RATCHETCOMBINATIONSPANNER d: Product description Joker ratcheting combination wrenches with angled ratchet head and switch lever. The metal plate in the jaw provides for the holding function which reduces the risk of losing nuts and bolts. The integrated limit stop can prevent any slipping from the bolt head downwards and enables higher torque to be applied. The exchangeable metal plate in the jaw securely holds nuts and bolts with its extra hard teeth and reduces the risk of slipping. The double-hex geometry delivers a very positive connection with nuts or bolts and again provides for a lower risk of any slipping. The low return angle of only 30° at the jaw end avoids any time-consuming flipping of the wrench when fastening. The reversible ratchet mechanism at the ring end with its fine toothing (80 teeth) ensures great flexibility even in confined spaces. Audibly precise ratchet mechanism. Additionally, the robust two-piece locking element provides for an extreme stability. Comes with a 15° tilted ratchet end for secure work even at high torque. The special forged geometry allows for high torque transfer and high flexural rigidity. Manufactured out of high-performance chrome-molybdenum steel with a nickel-chromium coating for high corrosion protection. With Take it easy tool finder: colour coding according to size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping Very fine toothing and robust locking element Ratchet end tilted by 15° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench, switch lever for convenient change of direction; ring end tilted at 15° from the handle Features and benefits With the Joker you can now loosen, lock and tighten screws and bolts in situations where conventional tools fail. That's why the Joker is smarter. Plus, it cuts a damn good figure in every position. The direction of the fine-tooth ratchet mechanism can easily be changed via the smooth switch lever. The ratchet end is tilted at 15° to the tool axis, making application of the tool in confined spaces much easier. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6001 Joker Switch Ratcheting combination wrench, with switch lever, 12 x 171 mm kts: socket and ring spanner, switchable, 12 x 171 mm kpn: 6001 Joker Switch kpn_dash: kpn_clear: 6001JokerSwitch bkpn: WERA 6001 Joker Switch bkpn_clear: WERA 6001JokerSwitch c_path: Home / Tools / Hand tools / Keys / Keys / Ratchet combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratchet combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020067001 sr_ns: WERA05020067001
r: 03166692 p: 9.752 pid: 31346 b: WERA q: 0 st: lt: 15 ean: 4013288212566 sr: WERA 05020203001 sr_no_br: 05020203001 sr_no_br_cl: 05020203001 sr_cl: WERA05020203001 sr_dash: sold: 87.768 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 12 mm Length 48 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (12 x 148 mm) - 05020203001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 12 x 148 mm kts: ring spanner (12 x 148 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020203001 sr_ns: WERA05020203001
r: 02828984 p: 42.809 pid: 42947 b: WERA q: 0 st: lt: 8 ean: 4013288184849 sr: WERA 05020081001 sr_no_br: 05020081001 sr_no_br_cl: 05020081001 sr_cl: WERA05020081001 sr_dash: sold: 85.618 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 11/16" Overall length 234 mm Product Range Wera Joker n: WERA 6001 Joker Switch Imperial socket and ring spanner, switchable, inch, 11/16" x 234 mm - 05020081001 cn: RATCHET COMBINATION SPANNER cn2: RATCHET COMBINATION SPANNER cn_clear: RATCHETCOMBINATIONSPANNER d: Product description Joker ratcheting combination wrenches with angled ratchet head and switch lever. The metal plate in the jaw provides for the holding function which reduces the risk of losing nuts and bolts. The integrated limit stop can prevent any slipping from the bolt head downwards and enables higher torque to be applied. The exchangeable metal plate in the jaw securely holds nuts and bolts with its extra hard teeth and reduces the risk of slipping. The double-hex geometry delivers a very positive connection with nuts or bolts and again provides for a lower risk of any slipping. The low return angle of only 30° at the jaw end avoids any time-consuming flipping of the wrench when fastening. The reversible ratchet mechanism at the ring end with its fine toothing (80 teeth) ensures great flexibility even in confined spaces. Audibly precise ratchet mechanism. Additionally, the robust two-piece locking element provides for an extreme stability. Comes with a 15° tilted ratchet end for secure work even at high torque. The special forged geometry allows for high torque transfer and high flexural rigidity. Manufactured out of high-performance chrome-molybdenum steel with a nickel-chromium coating for high corrosion protection. With Take it easy tool finder: colour coding according to size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping Very fine toothing and robust locking element Ratchet end tilted by 15° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench, switch lever for convenient change of direction; ring end tilted at 15° from the handle Features and benefits With the Joker you can now loosen, lock and tighten screws and bolts in situations where conventional tools fail. That's why the Joker is smarter. Plus, it cuts a damn good figure in every position. The direction of the fine-tooth ratchet mechanism can easily be changed via the smooth switch lever. The ratchet end is tilted at 15° to the tool axis, making application of the tool in confined spaces much easier. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6001 Joker Switch Ratcheting combination wrench, with switch lever, Imperial, 11/16" x 234 mm kts: socket and ring spanner, switchable, inch, 11/16" x 234 mm kpn: 6001 Joker Switch Imperial kpn_dash: kpn_clear: 6001JokerSwitchImperial bkpn: WERA 6001 Joker Switch Imperial bkpn_clear: WERA 6001JokerSwitchImperial c_path: Home / Tools / Hand tools / Keys / Keys / Ratchet combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratchet combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020081001 sr_ns: WERA05020081001
r: 02829016 p: 9.421 pid: 42953 b: WERA q: 0 st: lt: 10 ean: 4013288168320 sr: WERA 05671383001 sr_no_br: 05671383001 sr_no_br_cl: 05671383001 sr_cl: WERA05671383001 sr_dash: sold: 84.789 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Accessory/Part type Case Product Range Wera Joker n: WERA 9453 case 6000 for 4 Joker socket and ratchet spanners, empty, 290 x 100 mm - 05671383001 cn: ACCESSORY/PART WRENCH cn2: ACCESSORY/PART WRENCH cn_clear: ACCESSORYPARTWRENCH d: Product description Robust pouch for 4 Jokers; with rubber label. Offers space for 4 JOKER combination ratcheting wrenches Pouch for 4 Joker combination ratcheting wrenches, empty Robust bag with strong hook-and-loop fastener and hanger Features and benefits ds: dsc: Scope of delivery 9453 Pouch 6000 for 4 Joker Ratcheting combination wrenches, empty, 290 x 100 mm kts: case 6000 for 4 Joker socket and ratchet spanners, empty, 290 x 100 mm kpn: 9453 kpn_dash: kpn_clear: 9453 bkpn: WERA 9453 bkpn_clear: WERA 9453 c_path: Home / Tools / Hand tools / Keys / Accessories and spare parts / Accessory/part wrench | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera accessories and spare parts / Wera accessory/part wrench | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05671383001 sr_ns: WERA05671383001
r: 08085443 p: 34.876 pid: 71242 b: WERA q: 0 st: lt: 8 ean: 4013288225504 sr: WERA 05137331001 sr_no_br: 05137331001 sr_no_br_cl: 05137331001 sr_cl: WERA05137331001 sr_dash: sold: 69.752 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Length 392 mm Width 344 mm Product Range Wera Joker n: WERA 9831 foam insert for 6003 Joker Set 1, without tools, 344 x 30 x 392 mm - 05137331001 cn: TOOL TRAY INSERT cn2: TOOL TRAY INSERT cn_clear: TOOLTRAYINSERT d: Product description One durable foam insert, without tools; two-coloured for quick identification of missing parts; width x height x depth: 344 x 30 x 392 mm; spare foam insert for Wera item 9731; suitable for the Tool Rebel roller cabinet. Durable foam insert, each tool has its own place; two-coloured, missing tools will quickly be noticed High-quality, durable foam insert without chemical vapours Optimum fit for the best possible removal of the tools from the foam insert Water- and oil-repellent, low maintenance and easy to clean Protection of the tool from dirt and impact One durable foam insert, without tools; two-coloured for quick identification of missing parts; width x height x depth: 344 x 30 x 392 mm; spare insert for Wera item 9731; suitable for the Tool Rebel roller cabinet. Features and benefits The tools sit securely in the foam thanks to precise contour cutouts, but are easy to remove. The carefully designed arrangement of the tools ensures space-saving storage and quick access to each tool. After removing the tool the light grey second foam becomes visible and therefore missing tools are quickly identified. ds: dsc: Scope of delivery 9831 Foam insert 6003 Joker Set 1, empty, 344 x 30 x 392 mm kts: foam insert for 6003 Joker Set 1, without tools, 344 x 30 x 392 mm kpn: 9831 kpn_dash: kpn_clear: 9831 bkpn: WERA 9831 bkpn_clear: WERA 9831 c_path: Home / Corporate and environmental facilities / Workshop furniture & tooling / Accessories and parts fixed and mobile furniture / Tool tray insert | Home / Our brands / Wera / Wera corporate and environmental facilities / Wera workshop furniture & tooling / Wera accessories and parts fixed and mobile furniture / Wera tool tray insert | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05137331001 sr_ns: WERA05137331001
r: 08085444 p: 18.842 pid: 69968 b: WERA q: 0 st: lt: 8 ean: 4013288225511 sr: WERA 05137332001 sr_no_br: 05137332001 sr_no_br_cl: 05137332001 sr_cl: WERA05137332001 sr_dash: sold: 56.526 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Length 392 mm Width 172 mm Product Range Wera Joker n: WERA 9832 foam insert for 6004 Joker Set 1, without tools, 172 x 30 x 392 mm - 05137332001 cn: TOOL TRAY INSERT cn2: TOOL TRAY INSERT cn_clear: TOOLTRAYINSERT d: Product description One durable foam insert, without tools; two-coloured for quick identification of missing parts; width x height x depth: 172 x 30 x 392 mm; spare foam insert for Wera item 9732; suitable for the Tool Rebel roller cabinet. Durable foam insert, each tool has its own place; two-coloured, missing tools will quickly be noticed High-quality, durable foam insert without chemical vapours Optimum fit for the best possible removal of the tools from the foam insert Water- and oil-repellent, low maintenance and easy to clean Protection of the tool from dirt and impact One durable foam insert, without tools; two-coloured for quick identification of missing parts; width x height x depth: 172 x 30 x 392 mm; spare insert for Wera item 9732; suitable for the Tool Rebel roller cabinet. Features and benefits The tools sit securely in the foam thanks to precise contour cutouts, but are easy to remove. The carefully designed arrangement of the tools ensures space-saving storage and quick access to each tool. After removing the tool the light grey second foam becomes visible and therefore missing tools are quickly identified. ds: dsc: Scope of delivery 9832 Foam insert 6004 Joker Set 1, empty, 172 x 30 x 392 mm kts: foam insert for 6004 Joker Set 1, without tools, 172 x 30 x 392 mm kpn: 9832 kpn_dash: kpn_clear: 9832 bkpn: WERA 9832 bkpn_clear: WERA 9832 c_path: Home / Corporate and environmental facilities / Workshop furniture & tooling / Accessories and parts fixed and mobile furniture / Tool tray insert | Home / Our brands / Wera / Wera corporate and environmental facilities / Wera workshop furniture & tooling / Wera accessories and parts fixed and mobile furniture / Wera tool tray insert | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05137332001 sr_ns: WERA05137332001
r: 03176959 p: 52.727 pid: 33883 b: WERA q: 0 st: lt: 15 ean: 4013288214188 sr: WERA 05020240001 sr_no_br: 05020240001 sr_no_br_cl: 05020240001 sr_cl: WERA05020240001 sr_dash: sold: 52.727 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Min. width across flats 5/16 inch Max. width across flats 3/4 inch Supplied in Case Quantity per set 5 Product Range Wera Joker n: WERA 6003 Joker 5 Imperial Set 1 ring spanner set inch sizes 5-piece - 05020240001 cn: COMBINATION SPANNER SET cn2: COMBINATION SPANNER SET cn_clear: COMBINATIONSPANNERSET d: Product description As installation spaces become increasingly confined, it remains necessary that tools enable users to work successfully. Narrow spaces require additional placement points of the tool, to allow screws to be accessed and actuated. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be "taken" every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With Take it easy tool finder: colour coding by size. The Joker pouches are suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system thanks to the hook and loop fastener system on the back. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank Suitable for docking with the Wera 2go system Combination wrench set, open side offset by 7.5°5-piece setIn robust pouch Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The Joker pouches are suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system thanks to the hook and loop fastener system on the back. ds: dsc: Scope of delivery 6003 Joker 5 Imperial Set 1 Combination wrench set, Imperial, 5 pieces 5x 6003 Joker Combination wrench, Imperial: 5/16"x115 mm, 3/8"x125 mm, 1/2"x160 mm, 9/16"x167 mm, 3/4"x230 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: ring spanner set inch sizes 5-piece kpn: 6003 Joker 5 Imperial Set 1 kpn_dash: kpn_clear: 6003Joker5ImperialSet1 bkpn: WERA 6003 Joker 5 Imperial Set 1 bkpn_clear: WERA 6003Joker5ImperialSet1 c_path: Home / Tools / Hand tools / Keys / Sets / Combination spanner set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera combination spanner set | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020240001 sr_ns: WERA05020240001
r: 02828913 p: 16.363 pid: 42545 b: WERA q: 0 st: lt: 15 ean: 4013288167361 sr: WERA 05073281001 sr_no_br: 05073281001 sr_no_br_cl: 05073281001 sr_cl: WERA05073281001 sr_dash: sold: 49.089 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 3/8" Overall length 159 mm Product Range Wera Joker n: WERA 6000 Joker Imperial socket and ring spanner, inch, 3/8" x 159 mm - 05073281001 cn: RATCHET COMBINATION SPANNER cn2: RATCHET COMBINATION SPANNER cn_clear: RATCHETCOMBINATIONSPANNER d: Product description High quality, imperial, combination ratchet wrench by Wera. Everything that a wrench has to be able to do. And a whole lot more. Faster, better, stylish. Yes, a real Joker. The new generation of combination ratchet wrenches. Suitable for hexagon socket screws, bolts or nuts. Comes with holding function, thanks to the metal plate in the jaw, which reduces the risk of dropping nuts and bolts. The replaceable metal plate in the jaw secures nuts and bolts with its extra hard teeth and reduces the danger of slipping. The integrated limit stop prevents any slipping around the bolt head and allows higher torque to be applied. The double-hex geometry makes for a positive connection with nuts or bolts and reduces the risk of slipping. A return angle of only 30° at the open end prevents any time consuming flipping of the wrench. The ratchet mechanism at the ring end, with an exceptional, fine-tooth mechanism - 80 teeth in all - enables flexibility even in very confined working spaces. The specially forged geometry ensures high torque transfer and strength. The ratchet is manufactured out of high performance chrome molybdenum steel with nickel-chrome coating for high corrosion protection. Take it easy Tool Finder with colour coding according to sizes. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping The double-hex geometry reduces the risk of slipping Return angle of only 30° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench Features and benefits When we began to think about open-ended wrenches, we asked ourselves: why does the wrench always have to be flipped over; why does it have an offset design; why does it slip off injuring fingers? The new design of the open end resulted in a real "Joker" that works even when all other trumps have been played. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6000 Joker Ratcheting combination wrenches, Imperial, 3/8" x 159 mm kts: socket and ring spanner, inch, 3/8" x 159 mm kpn: 6000 Joker Imperial kpn_dash: kpn_clear: 6000JokerImperial bkpn: WERA 6000 Joker Imperial bkpn_clear: WERA 6000JokerImperial c_path: Home / Tools / Hand tools / Keys / Keys / Ratchet combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratchet combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05073281001 sr_ns: WERA05073281001
r: 02828915 p: 15.537 pid: 42932 b: WERA q: 0 st: lt: 15 ean: 4013288167378 sr: WERA 05073282001 sr_no_br: 05073282001 sr_no_br_cl: 05073282001 sr_cl: WERA05073282001 sr_dash: sold: 46.611 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 7/16" Overall length 165 mm Product Range Wera Joker n: WERA 6000 Joker Imperial socket and ring spanner, inch, 7/16" x 165 mm - 05073282001 cn: RATCHET COMBINATION SPANNER cn2: RATCHET COMBINATION SPANNER cn_clear: RATCHETCOMBINATIONSPANNER d: Product description High quality, imperial, combination ratchet wrench by Wera. Everything that a wrench has to be able to do. And a whole lot more. Faster, better, stylish. Yes, a real Joker. The new generation of combination ratchet wrenches. Suitable for hexagon socket screws, bolts or nuts. Comes with holding function, thanks to the metal plate in the jaw, which reduces the risk of dropping nuts and bolts. The replaceable metal plate in the jaw secures nuts and bolts with its extra hard teeth and reduces the danger of slipping. The integrated limit stop prevents any slipping around the bolt head and allows higher torque to be applied. The double-hex geometry makes for a positive connection with nuts or bolts and reduces the risk of slipping. A return angle of only 30° at the open end prevents any time consuming flipping of the wrench. The ratchet mechanism at the ring end, with an exceptional, fine-tooth mechanism - 80 teeth in all - enables flexibility even in very confined working spaces. The specially forged geometry ensures high torque transfer and strength. The ratchet is manufactured out of high performance chrome molybdenum steel with nickel-chrome coating for high corrosion protection. Take it easy Tool Finder with colour coding according to sizes. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping The double-hex geometry reduces the risk of slipping Return angle of only 30° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench Features and benefits When we began to think about open-ended wrenches, we asked ourselves: why does the wrench always have to be flipped over; why does it have an offset design; why does it slip off injuring fingers? The new design of the open end resulted in a real "Joker" that works even when all other trumps have been played. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6000 Joker Ratcheting combination wrenches, Imperial, 7/16" x 165 mm kts: socket and ring spanner, inch, 7/16" x 165 mm kpn: 6000 Joker Imperial kpn_dash: kpn_clear: 6000JokerImperial bkpn: WERA 6000 Joker Imperial bkpn_clear: WERA 6000JokerImperial c_path: Home / Tools / Hand tools / Keys / Keys / Ratchet combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratchet combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05073282001 sr_ns: WERA05073282001
r: 02828969 p: 42.809 pid: 42276 b: WERA q: 0 st: lt: 8 ean: 4013288184757 sr: WERA 05020073001 sr_no_br: 05020073001 sr_no_br_cl: 05020073001 sr_cl: WERA05020073001 sr_dash: sold: 42.809 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 18 mm Overall length 234 mm Product Range Wera Joker n: WERA 6001 Joker Switch socket and ring spanner, switchable, 18 x 234 mm - 05020073001 cn: RATCHET COMBINATION SPANNER cn2: RATCHET COMBINATION SPANNER cn_clear: RATCHETCOMBINATIONSPANNER d: Product description Joker ratcheting combination wrenches with angled ratchet head and switch lever. The metal plate in the jaw provides for the holding function which reduces the risk of losing nuts and bolts. The integrated limit stop can prevent any slipping from the bolt head downwards and enables higher torque to be applied. The exchangeable metal plate in the jaw securely holds nuts and bolts with its extra hard teeth and reduces the risk of slipping. The double-hex geometry delivers a very positive connection with nuts or bolts and again provides for a lower risk of any slipping. The low return angle of only 30° at the jaw end avoids any time-consuming flipping of the wrench when fastening. The reversible ratchet mechanism at the ring end with its fine toothing (80 teeth) ensures great flexibility even in confined spaces. Audibly precise ratchet mechanism. Additionally, the robust two-piece locking element provides for an extreme stability. Comes with a 15° tilted ratchet end for secure work even at high torque. The special forged geometry allows for high torque transfer and high flexural rigidity. Manufactured out of high-performance chrome-molybdenum steel with a nickel-chromium coating for high corrosion protection. With Take it easy tool finder: colour coding according to size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping Very fine toothing and robust locking element Ratchet end tilted by 15° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench, switch lever for convenient change of direction; ring end tilted at 15° from the handle Features and benefits With the Joker you can now loosen, lock and tighten screws and bolts in situations where conventional tools fail. That's why the Joker is smarter. Plus, it cuts a damn good figure in every position. The direction of the fine-tooth ratchet mechanism can easily be changed via the smooth switch lever. The ratchet end is tilted at 15° to the tool axis, making application of the tool in confined spaces much easier. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6001 Joker Switch Ratcheting combination wrench, with switch lever, 18 x 234 mm kts: socket and ring spanner, switchable, 18 x 234 mm kpn: 6001 Joker Switch kpn_dash: kpn_clear: 6001JokerSwitch bkpn: WERA 6001 Joker Switch bkpn_clear: WERA 6001JokerSwitch c_path: Home / Tools / Hand tools / Keys / Keys / Ratchet combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratchet combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020073001 sr_ns: WERA05020073001
