r: 02053611 p: 8.36 pid: 42816 b: WERA q: 0 st: lt: 10 ean: 4013288041289 sr: WERA 05060148001 sr_no_br: 05060148001 sr_no_br_cl: 05060148001 sr_cl: WERA05060148001 sr_dash: sold: 41.8 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Square Connection size (bit) 1/4" VDE approved No Bit tip # 2 n: WERA 868/4 BTZ Square-Plus inside square bit, 2 x 50 mm - 05060148001 cn: BIT cn2: BIT cn_clear: BIT d: Product description BiTorsion bits for square head socket screws with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Best possible service life with the matching holder. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-F 6.3. Suitable for square head socket screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Square socket head screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design BiTorsion for long service life, extra-tough, for universal use Features and benefits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. The BiTorsion holder and the BiTorsion bit can, of course, be used independently of one another. ds: dsc: Scope of delivery 868/4 BTZ Square-Plus bits, # 2 x 50 mm kts: inside square bit, # 2 x 50 mm kpn: 868/4 BTZ Square-Plus kpn_dash: 868/4 BTZ Square kpn_clear: 8684BTZSquarePlus bkpn: WERA 868/4 BTZ Square-Plus bkpn_clear: WERA 8684BTZSquarePlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05060148001 sr_ns: WERA05060148001
r: 41071187 p: 13.884 pid: 72586 b: WERA q: 0 st: lt: 13 ean: 4013288108210 sr: WERA 05009343001 sr_no_br: 05009343001 sr_no_br_cl: 05009343001 sr_cl: WERA05009343001 sr_dash: sold: 41.652 p_range: none type: standard act: 1 avo: 1 av: Drive size PZ3 Blade length 150 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Pozidriv n: WERA 355 SK PZ Pozidriv screwdriver, PZ 3 x 150 mm - 05009343001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdriver by Wera. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer for fast and low-fatigue working. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdriver, for cross-recess screws, Pozidriv Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Application Suitable for Pozidriv screws Blade Hexagonal, sizes 1 - 3 with bolster Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (black = Pozidriv) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Hexagonal blade and bolster for higher torque transfer. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 355 SK PZ Screwdriver for Pozidriv screws, PZ 3 x 150 mm kts: Pozidriv screwdriver, PZ 3 x 150 mm kpn: 355 SK PZ kpn_dash: kpn_clear: 355SKPZ bkpn: WERA 355 SK PZ bkpn_clear: WERA 355SKPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05009343001 sr_ns: WERA05009343001
r: 02830656 p: 10.413 pid: 42825 b: WERA q: 0 st: lt: 16 ean: 4013288181411 sr: WERA 05100030001 sr_no_br: 05100030001 sr_no_br_cl: 05100030001 sr_cl: WERA05100030001 sr_dash: sold: 41.652 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 6,5 mm Drive type Slotted Blade length 150 mm Blade thickness 1,2 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V n: WERA 334 SB saw blade screwdriver, garage blade, 1.2 x 6.5 x 150 mm - 05100030001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform Plus handle for comfortable ergonomic screwdriving, avoiding blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface "bites" into the screw head and unintentional slipping is a thing of the past. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Screwdriver for slotted screws Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal blade and bolster for higher torque transfer Lasertip tips for more secure fit in the screw head Application Slotted screws Blade Round Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component, sizes 2.0 x 12.0, 2.5 x 14.0: Kraftform with non-roll feature, single-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. ds: dsc: Scope of delivery 334 SB Screwdriver for slotted screws, 1.2 x 6.5 x 150 mm kts: saw blade screwdriver, garage blade, 1.2 x 6.5 x 150 mm kpn: 334 SB kpn_dash: kpn_clear: 334SB bkpn: WERA 334 SB bkpn_clear: WERA 334SB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05100030001 sr_ns: WERA05100030001
r: 02033085 p: 6.942 pid: 42793 b: WERA q: 0 st: lt: 11 ean: 4013288030696 sr: WERA 05060201001 sr_no_br: 05060201001 sr_no_br_cl: 05060201001 sr_cl: WERA05060201001 sr_dash: sold: 41.652 p_range: none type: standard act: 1 avo: 1 av: Length 152 mm Drive profile size (bit) 30 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T30 n: WERA 867/4 Z TORX bit, TX 30 x 152 mm - 05060201001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for TORX® socket screws. Tough, for universal use. 1/4" hexagonal, suitable for bitholding screwdrivers as per DIN ISO 1173-F 6.3. For recessed TORX® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 Z TORX® bits, TX 30 x 152 mm kts: bit, TX 30 x 152 mm kpn: 867/4 Z TORX kpn_dash: kpn_clear: 8674ZTORX bkpn: WERA 867/4 Z TORX bkpn_clear: WERA 8674ZTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05060201001 sr_ns: WERA05060201001
r: 41071160 p: 6.942 pid: 70671 b: WERA q: 0 st: lt: 10 ean: 4013288036469 sr: WERA 05006177001 sr_no_br: 05006177001 sr_no_br_cl: 05006177001 sr_cl: WERA05006177001 sr_dash: sold: 41.652 p_range: none type: standard act: 1 avo: 1 av: Drive size T27 Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No Drive type Torx n: WERA 167 i TORX VDE 167 i VDE insulated screwdriver Torx TX 27 x 100 mm - 05006177001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera VDE screwdriver with multi-component Kraftform Plus handle for fast and smooth work: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Zinc phosphate plated Application TORX® socket screws Blade Insulated, individually tested as per IEC 60900 Design Zinc-phosphated Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (green = TORX®) and size stamp. Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces - resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 167 i VDE Insulated screwdriver for TORX® screws, TX 27 x 100 mm kts: 167 i VDE insulated screwdriver Torx TX 27 x 100 mm kpn: 167 i TORX VDE kpn_dash: kpn_clear: 167iTORXVDE bkpn: WERA 167 i TORX VDE bkpn_clear: WERA 167iTORXVDE c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05006177001 sr_ns: WERA05006177001
r: 02824982 p: 10.36 pid: 46902 b: WERA q: 0 st: lt: 10 ean: 4013288155566 sr: WERA 05060193001 sr_no_br: 05060193001 sr_no_br_cl: 05060193001 sr_cl: WERA05060193001 sr_dash: sold: 41.44 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 9 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T9 n: WERA 867/4 Z TORX bit, TX 9 x 89 mm - 05060193001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for TORX® socket screws. Tough, for universal use. 1/4" hexagonal, suitable for bitholding screwdrivers as per DIN ISO 1173-F 6.3. For recessed TORX® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 Z TORX® bits, TX 9 x 89 mm kts: bit, TX 9 x 89 mm kpn: 867/4 Z TORX kpn_dash: kpn_clear: 8674ZTORX bkpn: WERA 867/4 Z TORX bkpn_clear: WERA 8674ZTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05060193001 sr_ns: WERA05060193001
r: 02818613 p: 10.36 pid: 46767 b: WERA q: 0 st: lt: 9 ean: 4013288030474 sr: WERA 05059785001 sr_no_br: 05059785001 sr_no_br_cl: 05059785001 sr_cl: WERA05059785001 sr_dash: sold: 41.44 p_range: none type: standard act: 1 avo: 1 av: Length 127 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH2 n: WERA 851/4 Z PH bit Phillips, PH 2 x 127 mm - 05059785001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for Phillips screws. Tough, for universal use. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For Phillips screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 851/4 Z bits, PH 2 x 127 mm kts: bit Phillips, PH 2 x 127 mm kpn: 851/4 Z PH kpn_dash: kpn_clear: 8514ZPH bkpn: WERA 851/4 Z PH bkpn_clear: WERA 8514ZPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059785001 sr_ns: WERA05059785001
r: 87990592 p: 10.36 pid: 71033 b: WERA q: 0 st: lt: 15 ean: 4013288030627 sr: WERA 05060189001 sr_no_br: 05060189001 sr_no_br_cl: 05060189001 sr_cl: WERA05060189001 sr_dash: sold: 41.44 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 25 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T25 n: WERA 867/4 Z TORX bit, TX 25 x 89 mm - 05060189001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for TORX® socket screws. Tough, for universal use. 1/4" hexagonal, suitable for bitholding screwdrivers as per DIN ISO 1173-F 6.3. For recessed TORX® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 Z TORX® bits, TX 25 x 89 mm kts: bit, TX 25 x 89 mm kpn: 867/4 Z TORX kpn_dash: kpn_clear: 8674ZTORX bkpn: WERA 867/4 Z TORX bkpn_clear: WERA 8674ZTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05060189001 sr_ns: WERA05060189001
r: 87010144 p: 6.89 pid: 70932 b: WERA q: 0 st: lt: 11 ean: 4013288011558 sr: WERA 05059478001 sr_no_br: 05059478001 sr_no_br_cl: 05059478001 sr_cl: WERA05059478001 sr_dash: sold: 41.34 p_range: none type: standard act: 1 avo: 1 av: Length 70 mm Blade thickness 0,8 mm Type of drive profile (bit) Slotted Connection size (bit) 1/4" VDE approved No Bit tip Slotted 4 mm Drive profile size (bit) 4 mm n: WERA 800/4 Z slotted screw bit, 0.8 x 4 x 70 mm - 05059478001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for slotted screws, for universal use. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For slotted screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Slotted screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 800/4 Z bits, 0.8 x 4 x 70 mm kts: slotted screw bit, 0.8 x 4 x 70 mm kpn: 800/4 Z kpn_dash: kpn_clear: 8004Z bkpn: WERA 800/4 Z bkpn_clear: WERA 8004Z c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059478001 sr_ns: WERA05059478001
r: 41070348 p: 13.719 pid: 71118 b: WERA q: 0 st: lt: 12 ean: 4013288003829 sr: WERA 05022830001 sr_no_br: 05022830001 sr_no_br_cl: 05022830001 sr_cl: WERA05022830001 sr_dash: sold: 41.157 p_range: none type: standard act: 1 avo: 1 av: Drive size HEX 10 mm Blade length 150 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Ball-end hexagon n: WERA 352 hexagonal ball head screwdriver, 10 x 150 mm - 05022830001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. The ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Hexagonal ballpoint screwdriver Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal blade and ballpoint for secure working even in difficult installation situations The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Hexagon socket screws Blade Hexagonal Design Ball end hexagon, chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, sizes W/F 12.0, W/F 1/2": Kraftform with non-roll feature, single-component. Take it easy tool finder: colour coding according to profile (blue = hexagon) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 352 Ball end screwdriver for hexagon socket screws, 10 x 150 mm kts: hexagonal ball head screwdriver, 10 x 150 mm kpn: 352 kpn_dash: kpn_clear: 352 bkpn: WERA 352 bkpn_clear: WERA 352 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05022830001 sr_ns: WERA05022830001
r: 03230167 p: 20.495 pid: 70564 b: WERA q: 0 st: lt: 13 ean: 4013288221568 sr: WERA 05136403001 sr_no_br: 05136403001 sr_no_br_cl: 05136403001 sr_cl: WERA05136403001 sr_dash: sold: 40.99 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Accessory/Part type Case For Kraftform Kompakt H 1 Product Range Wera Kraftform Kompakt n: WERA 9463 fabric case for Kraftform Kompakt H 1, empty, 302 x 50 x 120 mm - 05136403001 cn: ACCESSORY/PART SCREWING cn2: ACCESSORY/PART SCREWING cn_clear: ACCESSORYPARTSCREWING d: Product description Features and benefits ds: dsc: Scope of delivery 9463 Textile box Kraftform Kompakt H 1, empty, 302 x 50 x 120 mm kts: fabric case for Kraftform Kompakt H 1, empty, 302 x 50 x 120 mm kpn: 9463 kpn_dash: kpn_clear: 9463 bkpn: WERA 9463 bkpn_clear: WERA 9463 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Accessory/part screwing | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera accessory/part screwing | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05136403001 sr_ns: WERA05136403001
r: 08131801 p: 2.04 pid: 173629 b: WERA q: 0 st: lt: 8 ean: 4013288234520 sr: WERA 05058105001 sr_no_br: 05058105001 sr_no_br_cl: 05058105001 sr_cl: WERA05058105001 sr_dash: sold: 40.8 p_range: none type: standard act: 1 avo: 1 av: Length 30 mm Blade thickness 0,5 mm Type of drive profile (bit) Slotted Connection size (bit) 4 mm VDE approved No Bit tip Slotted 3 mm Drive profile size (bit) 3 mm n: WERA 800 Micro bit 0.50 x 3.0 x 30 mm - 05058105001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Bits for slotted screws. Tough, for universal use. 4 mm hexagonal. For slotted screws Tough for hard materials 4 mm hexagonal drive Application Slotted screws Drive 4 mm hexagonal Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 800/0 Micro bits for slotted screws, 0.50 x 3 x 30 mm kts: bit 0.50 x 3.0 x 30 mm kpn: 800 Micro kpn_dash: kpn_clear: 800Micro bkpn: WERA 800 Micro bkpn_clear: WERA 800Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05058105001 sr_ns: WERA05058105001
r: 08131800 p: 2.04 pid: 173630 b: WERA q: 0 st: lt: 8 ean: 4013288234513 sr: WERA 05058104001 sr_no_br: 05058104001 sr_no_br_cl: 05058104001 sr_cl: WERA05058104001 sr_dash: sold: 40.8 p_range: none type: standard act: 1 avo: 1 av: Length 30 mm Blade thickness 0,3 mm Type of drive profile (bit) Slotted Connection size (bit) 4 mm VDE approved No Bit tip Slotted 1,5 mm Drive profile size (bit) 1,5 mm n: WERA 800 Micro bit 0.30 x 1.5 x 30 mm - 05058104001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Bits for slotted screws. Tough, for universal use. 4 mm hexagonal. For slotted screws Tough for hard materials 4 mm hexagonal drive Application Slotted screws Drive 4 mm hexagonal Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 800/0 Micro bits for slotted screws, 0.3 x 1.5 x 30 mm kts: bit 0.30 x 1.5 x 30 mm kpn: 800 Micro kpn_dash: kpn_clear: 800Micro bkpn: WERA 800 Micro bkpn_clear: WERA 800Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05058104001 sr_ns: WERA05058104001
r: 03227243 p: 13.553 pid: 69587 b: WERA q: 0 st: lt: 8 ean: 4013288214997 sr: WERA 05136494001 sr_no_br: 05136494001 sr_no_br_cl: 05136494001 sr_cl: WERA05136494001 sr_dash: sold: 40.659 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Accessory/Part type Case For Kraftform Kompakt Turbo VDE (16 pieces) Product Range Wera Kraftform Kompakt n: WERA 9441 folding case for Kraftform Kompakt Turbo VDE 16, empty, 200 x 80 mm - 05136494001 cn: ACCESSORY/PART SCREWING cn2: ACCESSORY/PART SCREWING cn_clear: ACCESSORYPARTSCREWING d: Product description Robust folding bag for space-saving tool storage; ideal for mobile use, as the material used is light and firm; for Kraftform Kompakt Turbo VDE tool sets; empty. Robust material Strong hook and loop fastener system to prevent unintentional opening and therefore loss of the tool Compact design for space-saving storage Low weight for easy transport Compatible with Wera 2go Features and benefits The material used is distinguished by its high level of robustness. The robust loops made of broad rubber band hold the tool safe and tight. The textile box features a fleece zone at the back. Using the provided self-adhesive hook and loop fastener strips, the textile box can be attached to the Wera 2go components. Or to the wall, shelf or workshop trolley. ds: dsc: Scope of delivery 9441 Folding pouch Kraftform Kompakt Turbo VDE 16, empty, 200 x 80 mm kts: folding case for Kraftform Kompakt Turbo VDE 16, empty, 200 x 80 mm kpn: 9441 kpn_dash: kpn_clear: 9441 bkpn: WERA 9441 bkpn_clear: WERA 9441 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Accessory/part screwing | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera accessory/part screwing | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05136494001 sr_ns: WERA05136494001
r: 02059746 p: 8.099 pid: 42827 b: WERA q: 0 st: lt: 8 ean: 4013288025869 sr: WERA 05138260001 sr_no_br: 05138260001 sr_no_br_cl: 05138260001 sr_cl: WERA05138260001 sr_dash: sold: 40.495 p_range: none type: standard act: 1 avo: 1 av: Drive size TT10 Blade length 80 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx Tamper Resistant n: WERA 367 TORX BO screwdriver with bore, TX 10 x 80 mm - 05138260001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and low-fatigue working. TORX® BO screws have a protruding pin in their drive profile. This prevents any unauthorised loosening since the "normal" hex tools cannot move these screws. Only special TORX® BO tools have a bore hole which can slip over the pin. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Handle markings for simplified finding and sorting of the tool. Screwdrivers for recessed TORX® screws with safety pin Multi-component Kraftform handle for fast and ergonomic screwdriving For TORX® socket screws with safety pin Handle markings simplify finding and sorting of tools The Wera Black Point tip offers an exact fit and optimum corrosion protection Application TORX® screws with safety pin (BO = with bore hole) Blade Round Design Bore hole in TORX® section, chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. TORX® tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profile so that "normal" TORX® tools cannot be used. This pin fits into the borehole of TORX® BO tools allowing safety screws to be unfastened. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 367 TORX® BO Screwdriver for tamper-proof TORX® screws, TX 10 x 80 mm kts: screwdriver with bore, TX 10 x 80 mm kpn: 367 TORX BO kpn_dash: kpn_clear: 367TORXBO bkpn: WERA 367 TORX BO bkpn_clear: WERA 367TORXBO c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05138260001 sr_ns: WERA05138260001
r: 02830760 p: 8.099 pid: 42434 b: WERA q: 0 st: lt: 16 ean: 4013288097996 sr: WERA 05008723001 sr_no_br: 05008723001 sr_no_br_cl: 05008723001 sr_cl: WERA05008723001 sr_dash: sold: 40.495 p_range: none type: standard act: 1 avo: 1 av: Drive size PH2 Blade length 150 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Phillips n: WERA 350 PH Phillips screwdriver, PH 2 x 150 mm - 05008723001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform Plus handle for comfortable ergonomic screwdriving, avoiding blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface "bites" into the screw head and unintentional slipping is a thing of the past. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Screwdriver for cross-recess screws, Phillips Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Application Phillips screws Blade Round Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (red = Phillips) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 350 PH Screwdriver for Phillips screws, PH 2 x 150 mm kts: Phillips screwdriver, PH 2 x 150 mm kpn: 350 PH kpn_dash: kpn_clear: 350PH bkpn: WERA 350 PH bkpn_clear: WERA 350PH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05008723001 sr_ns: WERA05008723001
r: 41071250 p: 8.099 pid: 71836 b: WERA q: 0 st: lt: 11 ean: 4013288107435 sr: WERA 05032030001 sr_no_br: 05032030001 sr_no_br_cl: 05032030001 sr_cl: WERA05032030001 sr_dash: sold: 40.495 p_range: none type: standard act: 1 avo: 1 av: Drive size PZ0 Blade length 60 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Pozidriv n: WERA 3355 PZ Phillips screwdriver Pozidriv, stainless steel, PZ 0 x 60 mm - 05032030001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdriver out of stainless steel. The stainless tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. They can be used for industrial application without hesitation. Multi-component Kraftform handle for fast and low-fatigue working. Take it easy Tool Finder: colour coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Stainless screwdriver for cross-recess screws, Pozidriv Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Stainless against extraneous rust Application Suitable for Pozidriv screws Blade Round Design Stainless steel for minimising rust, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (black = Pozidriv) and size stamp. Features and benefits Screw stainless steel together with stainless steel! Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 3355 PZ Screwdriver for Pozidriv screws, stainless, PZ 0 x 60 mm kts: Phillips screwdriver Pozidriv, stainless steel, PZ 0 x 60 mm kpn: 3355 PZ kpn_dash: kpn_clear: 3355PZ bkpn: WERA 3355 PZ bkpn_clear: WERA 3355PZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05032030001 sr_ns: WERA05032030001
r: 41071261 p: 8.099 pid: 71230 b: WERA q: 0 st: lt: 12 ean: 4013288107541 sr: WERA 05032057001 sr_no_br: 05032057001 sr_no_br_cl: 05032057001 sr_cl: WERA05032057001 sr_dash: sold: 40.495 p_range: none type: standard act: 1 avo: 1 av: Drive size T30 Blade length 115 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx n: WERA 3367 TX Torx screwdriver, stainless steel, TX 30 x 115 mm - 05032057001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdriver out of stainless steel. The stainless tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. They can be used for industrial application without hesitation. Multi-component Kraftform handle for fast and low-fatigue working. Take it easy Tool Finder: colour coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Stainless screwdriver for recessed TORX® screws Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Stainless against extraneous rust Application TORX® socket screws Blade Round Design Stainless steel for minimising rust Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (green = TORX®) and size stamp. Features and benefits Screw stainless steel together with stainless steel! Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 3367 Screwdriver for TORX® screws, stainless, TX 30 x 115 mm kts: Torx screwdriver, stainless steel, TX 30 x 115 mm kpn: 3367 TX kpn_dash: kpn_clear: 3367TX bkpn: WERA 3367 TX bkpn_clear: WERA 3367TX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05032057001 sr_ns: WERA05032057001
r: 02835237 p: 10.082 pid: 41970 b: WERA q: 0 st: lt: 12 ean: 4013288093486 sr: WERA 05030150001 sr_no_br: 05030150001 sr_no_br_cl: 05030150001 sr_cl: WERA05030150001 sr_dash: sold: 40.328 p_range: none type: standard act: 1 avo: 1 av: Width across flats 5 mm With safety colour code 1000V ESD Yes Handle type Screwdriver handle Overall length 157 mm Blade length 60 mm VDE approved No n: WERA 1569 ESD cap screwdriver 5.0 x 60 mm - 05030150001 cn: NUT DRIVER cn2: NUT DRIVER cn_clear: NUTDRIVER d: Product description ESD-safe Micro screwdriver. Dependable protection against electrostatic energy and associated damage. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Power zones with integrated soft sections ensure the transfer of high loosening and tightening torque; a precision zone for the right rotation angle during fine adjustment work. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. Kraftform Micro screwdriver for hexagon head screws ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Kraftform Micro handle with rotating cap for rapid spinning Take it easy tool finder: colour coding according to profile and size Application Hexagon headed bolts, screws and nuts Blade Round Design Chrome-plated Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (gray = external hexagon) and size stamp. Features and benefits The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Multi-component screwdriver handle for ergonomic working. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allow rapid twisting. This makes time-consuming grip adjustments as with other conventional precision screwdrivers unnecessary. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 1569 ESD Nutdriver Kraftform Micro, 5 x 60 mm kts: ESD cap screwdriver 5.0 x 60 mm kpn: 1569 kpn_dash: kpn_clear: 1569 bkpn: WERA 1569 bkpn_clear: WERA 1569 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Nut driver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera nut driver sr_no_br_cl_ns: 05030150001 sr_ns: WERA05030150001
r: 41997506 p: 7.933 pid: 70683 b: WERA q: 0 st: lt: 11 ean: 4013288030740 sr: WERA 05060141001 sr_no_br: 05060141001 sr_no_br_cl: 05060141001 sr_cl: WERA05060141001 sr_dash: sold: 39.665 p_range: none type: standard act: 1 avo: 1 av: Length 70 mm Drive profile size (bit) 15 Blade thickness Type of drive profile (bit) Torx Tamper Resistant Connection size (bit) 1/4" VDE approved No Bit tip TT15 n: WERA 867/4 Z TORX BO bit with bore, TX 15 x 70 mm - 05060141001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for TORX® BO socket screws. TORX® BO screws have a protruding pin in their drive profile. This prevents unauthorized loosening, as these screws cannot be operated with "normal" TORX® tools. Only special TORX® BO tools have a bore which can mount the pin. Tough, for universal use. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For recessed TORX® screws with securing pin TORX® bit with bore hole on the output side Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX® socket screws with safety pin (BO = with bore hole) Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design TORX® with bore hole, tough, for universal use Features and benefits TORX® tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profile so that "normal" TORX® tools cannot be used. This pin fits into the borehole of TORX® BO tools allowing safety screws to be unfastened. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 Z TORX® BO bits with bore hole, TX 15 x 70 mm kts: bit with bore, TX 15 x 70 mm kpn: 867/4 Z TORX BO kpn_dash: kpn_clear: 8674ZTORXBO bkpn: WERA 867/4 Z TORX BO bkpn_clear: WERA 8674ZTORXBO c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05060141001 sr_ns: WERA05060141001
