r: 02814994 p: 38.677 pid: 17212 b: WERA q: 0 st: lt: 8 ean: 4013288179821 sr: WERA 05057430001 sr_no_br: 05057430001 sr_no_br_cl: 05057430001 sr_cl: WERA05057430001 sr_dash: sold: 464.124 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Mixed; Phillips; Pozidriv; Torx Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 30 Product Range Wera Bit-Check n: WERA Bit-Check 30 BiTorsion 1 screwdriver bit set, 30-piece - 05057430001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description Tough-absorbing bits for universal use. BiTorsion bits with a torsion zone - where kinetic energy is diverted from peak loads. This greatly extends the product service life. Offer the best possible service life with the appropriate holder. Comes with Rapidaptor technology, which allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward - for rapid bit change with just one hand. For the take-up of bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 und E 6.3. For insertion in the power screwdriver or into the chuck of the power drill. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera Take it easy Tool Finder with its colour coding and clearly visible imprint. BiTorsion bits for long service life Quick-release chuck with Rapidaptor technology Take it easy tool finder: colour coding according to profile and size The Bit-Checks by Wera are extremely compact and are therefore the ideal companion for mobile applications. Upright positionable Bit-Checks convince due to their functionality in a minimum of space 1 bit holder Rapidaptor with quick-release chuck, 29 BiTorsion bits for long service life, tough, for universal use. The Take it easy Bit-Checks have bits with a sleeve which - from its colour and size designation - make it simple to access the right bit quickly. Features and benefits The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. With softer BiTorsion zone to prevent the bit tip from twisting at high loads. This significantly increases product life. Tough design for universal use. Lightning-fast bit change without any extra tools. One-handed operation. With fast-rotating sleeve for easy wielding of the screwdriver. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. Bitholders, magnetic, for easier application of the screw ds: dsc: Scope of delivery Bit-Check 30 BiTorsion 1, 30 pieces 1x 889/4/1 K Rapidaptor Universal Bit Holder: 1/4" x 50 mm 9x 851/1 BTZ bits: 2x PH 1x25 mm, 5x PH 2x25 mm, 2x PH 3x25 mm 10x 855/1 BTZ bits: 2x PZ 1x25 mm, 6x PZ 2x25 mm, 2x PZ 3x25 mm 10x 867/1 BTZ TORX® bits: TX 10x25 mm, 2x TX 15x25 mm, 2x TX 20x25 mm, 2x TX 25x25 mm, 2x TX 30x25 mm, TX 40x25 mm kts: screwdriver bit set, 30-piece kpn: Bit-Check 30 BiTorsion 1 kpn_dash: Bit kpn_clear: BitCheck30BiTorsion1 bkpn: WERA Bit-Check 30 BiTorsion 1 bkpn_clear: WERA BitCheck30BiTorsion1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05057430001 sr_ns: WERA05057430001
r: 02829077 p: 57.685 pid: 42970 b: WERA q: 0 st: lt: 11 ean: 4013288165503 sr: WERA 05059294001 sr_no_br: 05059294001 sr_no_br_cl: 05059294001 sr_cl: WERA05059294001 sr_dash: sold: 461.48 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder type Internal hex VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 17 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 60 Kraftform Kompakt screwdriver handle with interchangeable blades 17-piece - 05059294001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Pouch with 89-mm long ballpoint bits, which enable a swivelling or pivoting of the tool axis. Includes 816 R Kraftform holder with Rapidaptor quick-release chuck and multi-component Kraftform handle for low-fatigue working. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Suitable for manual and power tool operations; 17-piece. Pouch with 89 mm-long bits Kraftform holder with Rapidaptor quick-release chuck Rapidaptor quick-release chuck allows rapid bit change Tough viscous bits for universal use Ballpoint bits allow a swivelling of the tool axis Pouch with 89 mm bits17-piece set1 Kraftform bitholding screwdriver 816 R with Rapidaptor quick-release chuck Features and benefits Why is the right tool so often not at hand? The reason: too many tools and overly-heavy tool bags can make it bothersome to carry them onsite. So for us it was a clear challenge: to design a tool that is suitable for a whole host of applications and can be easily taken along to jobs at other sites. Our solution: Kraftform Kompakt tools. A handle into which blades with a range of different profiles can be inserted. Compactly and protectively housed in a light and robust textile pouch or plastic box. Frequently, users have to work with their tools at a fixed workplace location as well as at external sites. Just as frequently, it is only on site that a decision is taken as to whether to work manually or with a power tool. The Kraftform Kompakt tool sets equip the user for both types of operation with just single set. Additionally, the sets are kept in belt pouches or plastic cases. This keeps them secure and clean and means that they are clearly arranged for easy tool selection, something that is very practical when they are to be used or transported. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The sets come with a Kraftform handle, quick-release chuck and bits for manual and power tool operations. The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. ds: dsc: Scope of delivery Kraftform Kompakt 60 KK, 17 pieces 1x 816 R Bitholding screwdriver with Rapidaptor quick-release chuck: 1/4" x 119 mm 3x 851/4 Z bits: PH 1x89 mm, PH 2x89 mm, PH 3x89 mm 3x 855/4 Z bits: PZ 1x89 mm, PZ 2x89 mm, PZ 3x89 mm 6x 867/4 KK TORX® bits: TX 10x89 mm, TX 15x89 mm, TX 20x89 mm, TX 25x89 mm, TX 30x89 mm, TX 40x89 mm 4x 842/4 Bits: 3x89 mm, 4x89 mm, 5x89 mm, 6x89 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mm kts: screwdriver handle with interchangeable blades 17-piece kpn: Kraftform Kompakt 60 Kraftform Kompakt kpn_dash: kpn_clear: KraftformKompakt60KraftformKompakt bkpn: WERA Kraftform Kompakt 60 Kraftform Kompakt bkpn_clear: WERA KraftformKompakt60KraftformKompakt c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05059294001 sr_ns: WERA05059294001
r: 02831671 p: 38.347 pid: 44655 b: WERA q: 0 st: lt: 11 ean: 4013288138378 sr: WERA 05028074001 sr_no_br: 05028074001 sr_no_br_cl: 05028074001 sr_cl: WERA05028074001 sr_dash: sold: 460.164 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive type Torx VDE approved No With safety colour code 1000V No Quantity per set 4 Product Range Wera Kraftform n: WERA 367/4 TORX HF Kraftform Plus screwdriver set extra long with holding function with 300 mm long blades 4-piece - 05028074001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 4-piece screwdriver set by Wera. Comes with an extra-long blade for low-lying, difficult-to-access working situations. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Holding function: the wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screw on the tool. Handle markings for simplified finding and sorting of the tool. Screwdriver for TORX® screws; holding function and extra-long 300 mm blade Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Holding function for TORX® screws, chrome-plated Application TORX®, with holding function for TORX® screws made according to Acument Intellectual Properties specifications, extra long (300 mm) blade Content 4-piece set Features and benefits In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! Extra-long blade for low-lying working situations. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. ds: dsc: Scope of delivery 367/4 TORX® HF Kraftform Plus Screwdriver set with holding function and 300 mm-long blades, 4 pieces 4x 367 TORX® HF Screwdriver with holding function for TORX® screws: TX 20x300 mm, TX 25x300 mm, TX 27x300 mm, TX 30x300 mm kts: Kraftform Plus screwdriver set extra long with holding function with 300 mm long blades 4-piece kpn: 367/4 TORX HF kpn_dash: kpn_clear: 3674TORXHF bkpn: WERA 367/4 TORX HF bkpn_clear: WERA 3674TORXHF c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05028074001 sr_ns: WERA05028074001
r: 03176877 p: 65.454 pid: 31931 b: WERA q: 0 st: lt: 12 ean: 4013288219510 sr: WERA 05134021001 sr_no_br: 05134021001 sr_no_br_cl: 05134021001 sr_cl: WERA05134021001 sr_dash: sold: 458.178 p_range: none type: standard act: 1 avo: 1 av: Type of drive profile (bit) Mixed; Phillips; Pozidriv; Torx Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 21 n: WERA 05134021001 screwdriver bit set T 1 for terrace construction 21-piece cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description Compact Wera tool set with the 17 most common screwdriving tools for patio construction. Bits in stainless steel design prevent extraneous rust. With extra smart bit holder, which enables a uniform depth thanks to the variable screw depth limitation, and prevents damage to decking with the fitted felt ring. High-quality 17-piece tool set for evenly flush countersunk screw heads for decking in patio construction Bit holder with adjustable screw depth limitation and protective felt ring for surface protection 15 bits (TORX®, PH, PZ) made from stainless steel to prevent extraneous rust plus 3888/4/1 K Rapidaptor stainless steel bit holder Take it easy tool finder: colour coding according to profile and size Compact folding pouch with Wera 2go compatibility incl. 4 spare felt rings Compact Wera tool set with the 17 most common screwdriving tools for patio construction. 1 bit holder with variable screw depth limitation, with retaining ring for a secure hold of the bits, 4 spare felt rings, which prevent brush marks on the patio decking, 1 Rapidaptor Stainless bit holder with quick-release chuck, 15 Stainless bits in stainless steel design to prevent extraneous rust, Take it easy tool finder: Colour coding in accordance to profile & size stamp, helps find the required bit quickly. Features and benefits Bit holder for evenly flush countersunk screws in patio construction The 881/4/1 bit holder allows for evenly flush countersinking of screws in decking when building patios. The screw depth can be adjusted as required. This prevents screws from being countersunk too deep. The screw head is evenly flush with the decking, therefore so-called "water nests", which usually lead to rot, are avoided. The required screw depth is set using the counter thread. Proven holder design, optimal fitting of the tool in the holder. Particularly robust for series applications. The exchangeable felt ring in the front of the bit mounting prevents brush marks on patio decking. Wera stainless steel bits are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel bits from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery Patio construction set T 1, 17 pieces 1x 881/4/1 Bit holder with variable screw depth limitation: 1/4" x 95 mm 1x 3888/4/1 K Rapidaptor Universal Bit Holder, stainless: 1/4" x 50 mm 3x 3851/1 TS bits, stainless: PH 1x25 mm, PH 2x25 mm, PH 3x25 mm 4x 3855/1 TS bits, stainless: PZ 1x25 mm, 2x PZ 2x25 mm, PZ 3x25 mm 6x 3867/1 TS TORX® bits, stainless: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 30x25 mm, TX 40x25 mm 2x 3867/1 TS P TORX® bits with pin, stainless: TX 25 x 25 mm 4x 9201 Felt ring for 881/4/1: 27 mm kts: screwdriver bit set T 1 for terrace construction 21-piece kpn: 05134021001 kpn_dash: kpn_clear: 05134021001 bkpn: WERA 05134021001 bkpn_clear: WERA 05134021001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set sr_no_br_cl_ns: 05134021001 sr_ns: WERA05134021001
r: 03226637 p: 26.776 pid: 71461 b: WERA q: 0 st: lt: 8 ean: 4013288214317 sr: WERA 05006470001 sr_no_br: 05006470001 sr_no_br_cl: 05006470001 sr_cl: WERA05006470001 sr_dash: sold: 455.192 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive type Pozidriv/Slotted VDE approved Yes With safety colour code 1000V No Quantity per set 2 Product Range Wera Kraftform n: WERA 165 iS PZ/S 1 + 2 screwdriver set Kraftform Plus series 100 with reduced blade diameter 2-piece - 05006470001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description Wera VDE screwdrivers with multi-component Kraftform Plus handle for fast and low-fatigue working: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Combination profile - slotted and Pozidriv* particularly for jobs on terminal blocks, fuse boxes, switches and relays. Individually tested in water bath at 10,000 volts for secure work at the permissible voltage of 1,000 volts. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Reduced shaft diameter: combination profile - Pozidriv/slotted Kraftform: The security screwdriver. With reduced blade diameter Application Combination profile Pozidriv/slotted Design 2-piece set in a box Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. Our screwdrivers are tested for dielectric strength under a 10,000 volt load to make sure that their most important property, their insulation, has been exhaustively tested. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces - resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. All Kraftform screwdrivers have a non-roll feature at the lower end of the handle. The hexagonal design prevents any annoying rolling away of the screwdriver at the workplace. ds: dsc: Scope of delivery 165 iS PZ/S # 1 + 2 Screwdriver set Kraftform Plus series 100. With reduced blade diameter, 2 pieces 2x 165 iS PZ/S VDE Insulated screwdriver with reduced blade diameter for PlusMinus screws (Pozidriv/slotted): # 1x80 mm, # 2x100 mm kts: screwdriver set Kraftform Plus series 100 with reduced blade diameter 2-piece kpn: 165 iS PZ/S # 1 + 2 kpn_dash: kpn_clear: 165iSPZS12 bkpn: WERA 165 iS PZ/S # 1 + 2 bkpn_clear: WERA 165iSPZS12 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05006470001 sr_ns: WERA05006470001
r: 41071188 p: 32.396 pid: 72591 b: WERA q: 0 st: lt: 16 ean: 4013288111418 sr: WERA 05007680001 sr_no_br: 05007680001 sr_no_br_cl: 05007680001 sr_cl: WERA05007680001 sr_dash: sold: 453.544 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Quantity per set 6 Product Range Wera Kraftform n: WERA 334 SK/6 screwdriver set Kraftform Plus Lasertip in holder, 6-piece - 05007680001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 6-piece screwdriver set with Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. The Lasertip tip literally bites into the head of the screw and thereby prevents any slipping. More torque can be transferred with the help of an open-end or ring spanner applied to the hexagonal blade and the integrated bolster. Take it easy Tool Finder: colour coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Including a practical rack for tidy storage of the screwdrivers. Screwdriver for slotted and cross-recess screws, Phillips Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal blade and bolster for higher torque transfer Lasertip tips for more secure fit in the screw head Lasertip hexagon blades and rack. Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted and Phillips screws Content 6-piece set and rack in display carton Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Hexagonal blade and bolster for higher torque transfer. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 334 SK/6 Rack Screwdriver set Kraftform Plus Lasertip and rack, 6 pieces 2x 350 SK PH Screwdriver for Phillips screws: PH 1x80 mm, PH 2x100 mm 4x 334 SK Screwdriver for slotted screws: 0.6x3.5x75 mm, 0.8x4x90 mm, 1x5.5x100 mm, 1.2x6.5x125 mm kts: screwdriver set Kraftform Plus Lasertip in holder, 6-piece kpn: 334 SK/6 kpn_dash: kpn_clear: 334SK6 bkpn: WERA 334 SK/6 bkpn_clear: WERA 334SK6 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05007680001 sr_ns: WERA05007680001
r: 41071084 p: 23.801 pid: 70636 b: WERA q: 0 st: lt: 8 ean: 4013288031952 sr: WERA 05118152001 sr_no_br: 05118152001 sr_no_br_cl: 05118152001 sr_cl: WERA05118152001 sr_dash: sold: 452.219 p_range: none type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Quantity per set 6 n: WERA 2035/6 B micro screwdriver set in holder 6-piece - 05118152001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description High quality Wera Micro screwdriver set for precision mechanical work. Rapid twisting is possible by fixing the hand on the twist cap and using the fast-turning zone just below it. This makes time-consuming grip adjustments unnecessary. Power zone with integrated soft zones ensure the transfer of higher tightening and loosening torque. Precision zone for the right angle for adjustment work. The Wera Black Point tip offers high corrosion protection and an exact fit. Includes practical rack for tidy storage of the screwdrivers. Kraftform Micro screwdriver for slotted and cross-recess screws, Phillips Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Anti-roll feature and rotating cap for rapid twisting The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted and Phillips screws Content 6-piece set and rack in display carton Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2035/6 B Screwdriver set and rack for electronic applications, 6 pieces 2x 2050 PH Screwdriver for Phillips screws for electronic applications: PH 0x60 mm, PH 1x80 mm 4x 2035 Screwdriver for slotted screws for electronic applications: 0.40x2.5x80 mm, 0.50x3x80 mm, 0.60x3.5x80 mm, 0.80x4x80 mm kts: micro screwdriver set in holder 6-piece kpn: 2035/6 B kpn_dash: kpn_clear: 20356B bkpn: WERA 2035/6 B bkpn_clear: WERA 20356B c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set sr_no_br_cl_ns: 05118152001 sr_ns: WERA05118152001
r: 41071295 p: 73.719 pid: 71258 b: WERA q: 0 st: lt: 13 ean: 4013288115720 sr: WERA 05071117001 sr_no_br: 05071117001 sr_no_br_cl: 05071117001 sr_cl: WERA05071117001 sr_dash: sold: 442.314 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder type Internal hex VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 17 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 60 Stainless Imperial screwdriver handle with stainless steel interchangeable blades in belt case 17-piece - 05071117001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Pouch with bits in a length of 89 mm. Includes Kraftform holder 3816 R with Rapidaptor quick-release chuck and multi-component Kraftform handle for low-fatigue working. Stainless design to prevent the formation of extraneous rust. Solution to the extraneous rust problem: fasten stainless screws with stainless tools Vacuum ice-hardening provides the required hardness and strength Handle/Interchangeable blade system for rapid exchange of the blade Rapidaptor technology for rapid bit change Storage and transport in a robust belt pouch Pouch with 89 mm bits, stainless steel17-piece set1 Kraftform stainless bitholding screwdriver 3816 R with Rapidaptor quick-release chuck Features and benefits Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The tools can be stored and carried in a robust belt pouch, keeping them always to hand. ds: dsc: Scope of delivery Kraftform Kompakt 60, stainless, Imperial, 17 pieces 1x 3816 R Bitholding screwdriver with Rapidaptor quick-release chuck, stainless: 1/4" x 119 mm 3x 3851/4 Bits, stainless: PH 1x89 mm, PH 2x89 mm, PH 3x89 mm 5x 3867/4 TORX® BO bits with bore hole, stainless: TX 10x89 mm, TX 15x89 mm, TX 20x89 mm, TX 25x89 mm, TX 30x89 mm 1x 3800/4 Bits, stainless: 1 x 5.5 x 89 mm 4x 3840/4 Bits, stainless: 3/32"x89 mm, 1/8"x89 mm, 5/32"x89 mm, 3/16"x89 mm 3x 3868/4 Square-Plus bits, stainless: # 1x89 mm, # 2x89 mm, # 3x89 mm kts: screwdriver handle with stainless steel interchangeable blades in belt case 17-piece kpn: Kraftform Kompakt 60 Stainless Imperial kpn_dash: kpn_clear: KraftformKompakt60StainlessImperial bkpn: WERA Kraftform Kompakt 60 Stainless Imperial bkpn_clear: WERA KraftformKompakt60StainlessImperial c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05071117001 sr_ns: WERA05071117001
r: 02814999 p: 11.528 pid: 17627 b: WERA q: 0 st: lt: 12 ean: 4013288179890 sr: WERA 05057422001 sr_no_br: 05057422001 sr_no_br_cl: 05057422001 sr_cl: WERA05057422001 sr_dash: sold: 438.064 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Mixed; Phillips; Torx; Pozidriv Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 12 Product Range Wera Bit-Check n: WERA Bit-Check 12 Wood 2 screwdriver bit set 12-piece - 05057422001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description Robust Bit-Check by Wera. Bit-Checks provide a quick overview of the tools available. Bits not needed are simply reinserted into the set and do not get lost. Simple transportation e.g. in the shirt pocket. Includes universal holder with strong permanent magnet for the take-up of bits with 1/4" hexagon head drive. Can be inserted in the power screwdriver or for use in the chuck of the electric drill. Multi-component Bit-Check that can be positioned upright for permanently secure bit storage. Upright positionable Bit-Checks convince due to their functionality in a minimum of space Particularly for wood applications Universal holder with stainless sleeve 1 universal bit holder with stainless steel sleeve, retaining ring, and strong permanent magnet, 11 bits, tough, for universal use. Features and benefits The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. The retaining ring and the strong permanent magnet ensure a particularly secure fitting of the bit in the holder. ds: dsc: Scope of delivery Bit-Check 12 Wood 2, 12 pieces 1x 899/4/1 Universal Bit Holder: 1/4" x 50 mm 1x 851/1 Z bits: PH 2 x 25 mm 4x 855/1 Z bits: PZ 1x25 mm, 2x PZ 2x25 mm, PZ 3x25 mm 6x 867/1 TORX® bits: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 30x25 mm, TX 40x25 mm kts: screwdriver bit set 12-piece kpn: Bit-Check 12 Wood 2 kpn_dash: Bit kpn_clear: BitCheck12Wood2 bkpn: WERA Bit-Check 12 Wood 2 bkpn_clear: WERA BitCheck12Wood2 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05057422001 sr_ns: WERA05057422001
r: 08107992 p: 142.809 pid: 159689 b: WERA q: 3 st: 1 lt: 1 ean: 4013288229915 sr: WERA 05006605001 sr_no_br: 05006605001 sr_no_br_cl: 05006605001 sr_cl: WERA05006605001 sr_dash: sold: 428.427 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved Yes ESD No Product Range Wera Kraftform Kompakt n: WERA 05006605001 Kraftform Kompakt VDE 15 Torque 1.2-3.0 Nm extra slim 1 Tool Finder, 15-piece cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description 15-piece torque VDE blade set. One torque VDE bladeholding screwdriver with adjustable torque value from 1.2-3.0 Nm. With ergonomic Kraftform Plus handle, with hard handle zones ensuring high working speeds while soft handle zones guarantee a high torque transfer. Includes 14 blades (12 of which with reduced blade diameter) with integrated protective insulation. With Take it easy Tool finder: Colour coding by profile and laser-engraved size indication - for quick and easy identification of the required tool. In a robust belt pouch. The textile box features a fleece zone at the back. Using the provided self-adhesive hook and loop fastener strips, the textile box can be attached to the Wera 2go components. Or to the wall, shelf or workshop trolley. Kraftform Kompakt VDE torque screwdriver set with adjustable torque Adjustable Kraftform VDE torque holder exclusively for Wera VDE interchangeable blades VDE blades (157 mm length) with practical spinning function, anti-roll protection and Take it easy tool finder: colour coding by profile and laser-engraved size indication Individually tested tools as per IEC 60900 In a robust folding pouch 15-piece setOne series 7400 VDE Kraftform adjustable torque bitholding screwdriver (1.2 - 3.0 Nm) solely for Wera VDE blades14 VDE blades (each 157 mm length) with Take it easy Tool finder with colour coding by profile and laser-engraved size indication; with reduced blade diameter (items Kraftform Kompakt 60 i Take it easy 0.4x2.5 and Kraftform Kompakt 67 i Take it easy TX 10 standard blade diameter) with integrated protective insulation, low-lying screw and spring elements can be easily reached and operatedIn a robust belt pouch Features and benefits Each Kraftform Kompakt VDE set has been tested individually at 10,000 volts, in accordance with IEC 60900.This ten-times-higher testing load guarantees safe working at their maximum permitted load of 1,000 volts. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Easy-to-read scale value. Measurement accuracy is ± 6 % in accordance with the standard EN ISO 6789. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. Simple setting of the required torque by hand. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. ds: dsc: Scope of delivery Kraftform Kompakt VDE 15 Torque 1.2-3.0 Nm extra slim 1 Tool Finder, 15 pieces 1x Series 7400 VDE Kraftform adjustable torque handle (0.3-3.5 Nm): 7441 VDE x 1.2-3.0 Nm 2x Kraftform Kompakt VDE 62 iS Take it easy: PH 1x157 mm, PH 2x157 mm 2x Kraftform Kompakt VDE 65 iS Take it easy: PZ 1x157 mm, PZ 2x157 mm 2x Kraftform Kompakt VDE 65 iS PZ/S Take it easy: # 1x157 mm, # 2x157 mm 1x Kraftform Kompakt VDE 67 i TORX® Take it easy: TX 10 x 157 mm 3x Kraftform Kompakt VDE 67 iS TORX® Take it easy: TX 15x157 mm, TX 20x157 mm, TX 25x157 mm 1x Kraftform Kompakt VDE 60 i Take it easy: 0.4 x 2.5 x 157 mm 3x Kraftform Kompakt VDE 60 iS Take it easy: 0.6x3.5x157 mm, 0.8x4x157 mm, 1x5.5x157 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mm kts: Kraftform Kompakt VDE 15 Torque 1.2-3.0 Nm extra slim 1 Tool Finder, 15-piece kpn: 05006605001 kpn_dash: kpn_clear: 05006605001 bkpn: WERA 05006605001 bkpn_clear: WERA 05006605001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006605001 sr_ns: WERA05006605001
r: 03336644 p: 137.355 pid: 159675 b: WERA q: 0 st: lt: 14 ean: 4013288229953 sr: WERA 05006609001 sr_no_br: 05006609001 sr_no_br_cl: 05006609001 sr_cl: WERA05006609001 sr_dash: sold: 412.065 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved Yes With safety colour code 1000V No ESD No Supplied in Case Quantity per set 16 Product Range Wera Kraftform Kompakt n: WERA 05006609001 Kraftform Kompakt VDE 16 Torque 1.2-3.0 Nm extra slim 1 Tool Finder, 16-piece cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description 16-piece torque VDE blade set. Includes 14 blades (12 of which with reduced blade diameter) with integrated protective insulation. With Take it easy Tool finder: Colour coding by profile and laser-engraved size indication - for quick and easy identification of the required tool. Torque VDE bladeholding screwdriver with adjustable torque value from 1.2-3.0 Nm and 817 VDE bitholding screwdriver. Both with ergonomic Kraftform Plus handle, with hard handle zones ensuring high working speeds while soft handle zones guarantee a high torque transfer. Kraftform Kompakt VDE torque screwdriver set with adjustable torque Adjustable Kraftform VDE torque holder exclusively for Wera VDE interchangeable blades VDE-insulated Kraftform 817 VDE bladeholding screwdriver with anti-roll protection VDE blades (157 mm length) with practical spinning function, anti-roll protection and Take it easy tool finder: colour coding by profile and laser-engraved size indication Individually tested tools as per IEC 60900 16-piece setOne series 7400 VDE Kraftform adjustable torque bitholding screwdriver (1.2 - 3.0 Nm) and one 817 VD bitholding screwdriver; solely for Wera VDE blades14 VDE blades (each 157 mm length) with Take it easy Tool finder with colour coding by profile and laser-engraved size indication; with reduced blade diameter (items Kraftform Kompakt 60 i Take it easy 0.4x2.5 and Kraftform Kompakt 67 i Take it easy TX 10 standard blade diameter) with integrated protective insulation, low-lying screw and spring elements can be easily reached and operatedIn a robust belt pouch Features and benefits Each Kraftform Kompakt VDE set has been tested individually at 10,000 volts, in accordance with IEC 60900.This ten-times-higher testing load guarantees safe working at their maximum permitted load of 1,000 volts. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Easy-to-read scale value. Measurement accuracy is ± 6 % in accordance with the standard EN ISO 6789. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. ds: dsc: Scope of delivery Kraftform Kompakt VDE 16 Torque 1.2-3.0 Nm extra slim 1 Tool Finder, 16 pieces 1x Series 7400 VDE Kraftform adjustable torque handle (0.3-3.5 Nm): 7441 VDE x 1.2-3.0 Nm 1x 817 VDE Kraftform blade-holding handle: 9 x 98 mm 2x Kraftform Kompakt VDE 62 iS Take it easy: PH 1x157 mm, PH 2x157 mm 2x Kraftform Kompakt VDE 65 iS Take it easy: PZ 1x157 mm, PZ 2x157 mm 2x Kraftform Kompakt VDE 65 iS PZ/S Take it easy: # 1x157 mm, # 2x157 mm 1x Kraftform Kompakt VDE 67 i TORX® Take it easy: TX 10 x 157 mm 3x Kraftform Kompakt VDE 67 iS TORX® Take it easy: TX 15x157 mm, TX 20x157 mm, TX 25x157 mm 1x Kraftform Kompakt VDE 60 i Take it easy: 0.4 x 2.5 x 157 mm 3x Kraftform Kompakt VDE 60 iS Take it easy: 0.6x3.5x157 mm, 0.8x4x157 mm, 1x5.5x157 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mm kts: Kraftform Kompakt VDE 16 Torque 1.2-3.0 Nm extra slim 1 Tool Finder, 16-piece kpn: 05006609001 kpn_dash: kpn_clear: 05006609001 bkpn: WERA 05006609001 bkpn_clear: WERA 05006609001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006609001 sr_ns: WERA05006609001
r: 03061489 p: 41.157 pid: 31866 b: WERA q: 0 st: lt: 12 ean: 4013288214553 sr: WERA 05057471001 sr_no_br: 05057471001 sr_no_br_cl: 05057471001 sr_cl: WERA05057471001 sr_dash: sold: 411.57 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder type Internal hex VDE approved No With safety colour code 1000V ESD No Quantity per set 19 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt Stubby 1 short screwdriver with bit magazine 19-piece - 05057471001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Handle/interchangeable blade system for lightning fast replacement of the required blade. Especially small bitholding Stubby screwdriver handle with short blade for hard to reach areas. Suitable for the mounting of bits with 1/4" hexagon drive as per DIN ISO 1173-C 6.3 and Wera connection series 1. With strong permanent magnet, which also holds large and heavy screws. The 2-component Kraftform handle with its practical combination of hard and soft zones allows for a firm grip and precise working. High-quality BiTorsion bits with BiTorsion zone to prevent twisting of the bit tip under high loads. This significantly increases product life. Compact, textile box with high robustness, low weight and volume. Suitable for docking with the Wera 2go system. Handle/Interchangeable blade system for rapid exchange of the blade Stubby bit hand holder: short compact shape for working in confined spaces Ergonomic 2-component Kraftform handle for precise work Bits with BiTorsion zone to cushion load peaks Take it easy tool finder: colour coding according to profile and size Textile box with 25 mm long bits19-piece set1 bitholding screwdriver 811/1 Stubby, 18 bits Features and benefits With its compact handle shape and the short blade, the Kraftform Stubbies are particularly suitable for working in confined screwdriving situations. The 2-component Kraftform handle allows high power transmission due to the non-slip, softer grip areas and high working speeds due to the hard grip areas, which allow a quick hand switch. The hexagonal non-roll feature prevents any rolling away at the workplace. Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. With softer BiTorsion zone to prevent the bit tip from twisting at high loads. This significantly increases product life. Tough design for universal use. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery Kraftform Kompakt Stubby 1, 19 pieces 1x 811/1 Stubby Bitholding screwdriver, magnetic: 1/4" 2x 851/1 BTZ bits: PH 1x25 mm, PH 2x25 mm 2x 855/1 BTZ bits: PZ 1x25 mm, PZ 2x25 mm 5x 867/1 BTZ TORX® bits: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 30x25 mm 6x 840/1 BTZ bits: 2x25 mm, 2.5x25 mm, 3x25 mm, 4x25 mm, 5x25 mm, 5.5x25 mm 3x 800/1 BTZ bits: 0.8x5.5x25 mm, 1x5.5x25 mm, 1.2x6.5x25 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mm kts: short screwdriver with bit magazine 19-piece kpn: Kraftform Kompakt Stubby 1 kpn_dash: kpn_clear: KraftformKompaktStubby1 bkpn: WERA Kraftform Kompakt Stubby 1 bkpn_clear: WERA KraftformKompaktStubby1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05057471001 sr_ns: WERA05057471001
r: 41071296 p: 27.107 pid: 70731 b: WERA q: 0 st: lt: 12 ean: 4013288113900 sr: WERA 05030170001 sr_no_br: 05030170001 sr_no_br_cl: 05030170001 sr_cl: WERA05030170001 sr_dash: sold: 406.605 p_range: none type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Quantity per set 6 n: WERA 1578 A/6 ESD Elektronica screwdriver set in holder 6-piece - 05030170001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description ESD-safe Wera Micro screwdriver set. Dependable protection against electrostatic energy and associated damage. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Power zones with integrated soft sections ensure the transfer of high loosening and tightening torque; a precision zone for the right rotation angle during fine adjustment work. The Black Point tip offers optimised corrosion protection and an exact fit. Kraftform Micro screwdriver set for slotted and cross-recess screws, Phillips ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Multi-component Kraftform Micro handles for fast and ergonomic screwdriving Hexagonal anti-roll feature against rolling away The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted and Phillips screws Content 6-piece set and rack in display carton Features and benefits The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Multi-component screwdriver handle for ergonomic working. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The fast-turning zone just below the rotating cap allow rapid twisting. This makes time-consuming grip adjustments as with other conventional precision screwdrivers unnecessary. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 1578 A/6 ESD Screwdriver set and rack for electronic applications, 6 pieces 2x 1550 PH ESD Kraftform Micro screwdriver for Phillips screws: PH 0x60 mm, PH 1x80 mm 4x 1578 A ESD Kraftform Micro screwdriver for slotted screws: 0.25x1.2x40 mm, 0.23x1.5x40 mm, 0.30x1.8x60 mm, 0.40x2.5x80 mm kts: screwdriver set in holder 6-piece kpn: 1578 A/6 ESD Elektronica kpn_dash: kpn_clear: 1578A6ESDElektronica bkpn: WERA 1578 A/6 ESD Elektronica bkpn_clear: WERA 1578A6ESDElektronica c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set sr_no_br_cl_ns: 05030170001 sr_ns: WERA05030170001
r: 08108070 p: 67.107 pid: 159688 b: WERA q: 0 st: lt: 12 ean: 4013288230034 sr: WERA 05006631001 sr_no_br: 05006631001 sr_no_br_cl: 05006631001 sr_cl: WERA05006631001 sr_dash: sold: 402.642 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder type Internal hex Type of drive profile (bit) Mixed VDE approved Yes With safety colour code 1000V Yes ESD No Supplied in Case Product Range Wera Kraftform Kompakt n: WERA 05006631001 Kraftform Kompakt VDE RVS 17 extra slim 1 Tool Finder, 17-piece cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description 2x 3817 Kraftform VDE bladeholding screwdrivers for ergonomic screwdriving. 15 VDE stainless blades, some of which with reduced blade diameter (iS), so that even low-lying screw and spring elements can be easily reached and operated; with Take it easy Tool finder: Colour coding by profile and laser-engraved size indication - for quick and easy identification of the required tool. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Wera's stainless steel tools are vacuum ice tempered and therefore have the hardness and strength properties required for screw connections. Industrial use is possible without restrictions. In a robust belt pouch. The pouch is suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system thanks to the hook and loop fastener system on the back. 2 VDE-insulated Kraftform 3817 VDE bladeholding screwdrivers with anti-roll protection VDE blades (157 mm length) with practical spinning function, anti-roll protection and Take it easy tool finder: colour coding by profile and laser-engraved size indication Blades made of stainless steel to prevent extraneous rust Individually tested VDE Stainless blades, some of which with reduced blade diameter Vacuum ice-hardening provides the required hardness and strength 17-piece set2 Kraftform 3817 VDE Stainless bitholding screwdrivers solely for Wera VDE blades15 Kraftform Kompakt VDE Stainless blades (each 157 mm length), PH 1, PH 2, PZ 1, PZ 2, PZ/S #1, PZ/S #2, TX 15, TX 20, TX 25, slotted 0.6 x 3.5, 0.8 x 4.0 and 1.0 x 5.5 with reduced blade diameter with integrated protective insulation, low-lying screw and spring elements can be easily reached and operated Features and benefits The Kraftform Kompakt series stands for low weight, low space requirements and high flexibility due to interchangeable blades. Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. Each Kraftform Kompakt VDE set has been tested individually at 10,000 volts, in accordance with IEC 60900.This ten-times-higher testing load guarantees safe working at their maximum permitted load of 1,000 volts. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Kraftform Kompakt VDE sets come with an insulated handle and insulated inter-changeable blades, that can be exchanged without any special tools. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. ds: dsc: Scope of delivery Kraftform Kompakt VDE Stainless 17 extra slim 1 Tool finder, 17 pieces 2x 3817 VDE Kraftform Stainless blade-holding handle: 9 x 98 mm 2x Kraftform Kompakt VDE 3062 iS Take it easy, stainless steel: PH 1x157 mm, PH 2x157 mm 2x Kraftform Kompakt VDE 3065 iS PZ Take it easy, stainless steel: PZ 1x157 mm, PZ 2x157 mm 2x Kraftform Kompakt VDE 3065 iS PZ/S Take it easy, stainless steel: # 1x157 mm, # 2x157 mm 1x Kraftform Kompakt VDE 3067 i TORX® Take it easy, stainless steel: TX 10 x 157 mm 3x Kraftform Kompakt VDE 3067 iS TORX® Take it easy, stainless steel: TX 15x157 mm, TX 20x157 mm, TX 25x157 mm 2x Kraftform Kompakt VDE 3060 i Take it easy, stainless steel: 0.4x2.5x157 mm, 1.2x6.5x157 mm 3x Kraftform Kompakt VDE 3060 iS Take it easy, stainless steel: 0.6x3.5x157 mm, 0.8x4x157 mm, 1x5.5x157 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mm kts: Kraftform Kompakt VDE RVS 17 extra slim 1 Tool Finder, 17-piece kpn: 05006631001 kpn_dash: kpn_clear: 05006631001 bkpn: WERA 05006631001 bkpn_clear: WERA 05006631001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006631001 sr_ns: WERA05006631001
r: 03164748 p: 8.429 pid: 20447 b: WERA q: 12 st: 1 lt: 1 ean: 4013288190802 sr: WERA 05056478001 sr_no_br: 05056478001 sr_no_br_cl: 05056478001 sr_cl: WERA05056478001 sr_dash: sold: 387.734 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Square Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 6 Product Range Wera Bit-Check n: WERA Bit-Check 6 V Universal 1 screwdriver bit set 6-piece - 05056478001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description 6 50 mm-long Wera bits tidily arranged in a minimum of space in a practical Bit-Check. High quality bits for square socket screws with holding function. The wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screw on the tool. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Upright positionable, multi-component Bit-Check Tough viscous bits for universal use V bits for square recess screws 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3 Bit-Check plastic material ensures robustness and durability 6 bits, tough, for universal use, with holding function. Features and benefits The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. V bits have a conical profile. The clamping forces thus resulting hold Robertson screws securely on the tip of the tool. Ideal for screwdriving at difficult-to-access places. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery Bit-Check 6 V Universal 1, 6 pieces 6x 868/4 V Square-Plus bits: # 1x50 mm, 3x # 2x50 mm, 2x # 3x50 mm kts: screwdriver bit set 6-piece kpn: Bit-Check 6 V Universal 1 kpn_dash: Bit kpn_clear: BitCheck6VUniversal1 bkpn: WERA Bit-Check 6 V Universal 1 bkpn_clear: WERA BitCheck6VUniversal1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05056478001 sr_ns: WERA05056478001
r: 02813949 p: 37.685 pid: 17603 b: WERA q: 0 st: lt: 12 ean: 4013288180148 sr: WERA 05057417001 sr_no_br: 05057417001 sr_no_br_cl: 05057417001 sr_cl: WERA05057417001 sr_dash: sold: 376.85 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Mixed; Pozidriv; Torx Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 10 Product Range Wera Bit-Check n: WERA Bit-Check 10 Impaktor 4 screwdriver bit set 10-piece - 05057417001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description The Impaktor technology ensures an above-average longer service life even under extreme conditions. Increased frictional resistance from the rough diamond particles on the tip of the bit prevent any slipping out of the screw head. Impaktor holder to cushion any extreme impulse peaks. Special torsion effect thanks to the double torsion spring. Particularly suitable for use in conventional impact screwdrivers. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera Take it easy Tool Finder with its colour coding and clearly visible imprint. Upright positionable, multi-component Bit-Check Impaktor technology for above-average service life Impaktor holder to absorb extreme impulse peaks Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out Take it easy tool finder: colour coding according to profile and size 1 Impaktor holder with retaining ring and magnet in the chuck for a secure fit of the bits in the holder, 9 Impaktor bits. The Take it easy Bit-Checks have bits with a sleeve which - from its colour and size designation - make it simple to access the right bit quickly. Features and benefits The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. For use with impact screwdrivers. Improve productivity when screwdriving with power tools. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. For an above-average service life. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Another product advantage is the coating of the Impaktor bits with minute diamond particles. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. Torsion zone specially designed to absorb such forces and thereby protect the bit tip. The Impaktor stainless steel holder with a retaining ring and magnet satisfies the extreme, dynamic requirements in that there are consciously no small mechanical component parts fitted as they would be more susceptible to failure. It focuses on the basic bit holding function and the cushioning of the extreme impulse peaks with its two different torsion zones. Mainly used in industrial screw assembly applications e.g. with screwdriving robots. The combination of the double torsion zones in the Impaktor holder and the torsion zone in the Impaktor bit results in the so-called TriTorsion system. The Take it easy Bit-Checks have bits with a sleeve which - from its colour (e.g. red = Phillips) and size designation - make it simple to access the right bit quickly. ds: dsc: Scope of delivery Bit-Check 10 Impaktor 4, 10 pieces 1x 897/4 IMP Impaktor holder with retaining ring and magnet: 1/4" x 75 mm 4x 855/1 IMP DC Impaktor bits: 3x PZ 2x25 mm, PZ 3x25 mm 5x 867/1 IMP DC Impaktor TORX® bits: 2x TX 20x25 mm, 2x TX 25x25 mm, TX 30x25 mm kts: screwdriver bit set 10-piece kpn: Bit-Check 10 Impaktor 4 kpn_dash: Bit kpn_clear: BitCheck10Impaktor4 bkpn: WERA Bit-Check 10 Impaktor 4 bkpn_clear: WERA BitCheck10Impaktor4 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05057417001 sr_ns: WERA05057417001
r: 08121647 p: 118.14 pid: 167038 b: WERA q: 0 st: lt: 9 ean: 4013288232540 sr: WERA 05150105001 sr_no_br: 05150105001 sr_no_br_cl: 05150105001 sr_cl: WERA05150105001 sr_dash: sold: 354.42 p_range: none type: standard act: 1 avo: 1 av: Drive type Mixed VDE approved No With safety colour code 1000V Quantity per set 13 n: WERA 9714 screw chisel/screwdriver set 1 in foam insert, 13-piece - 05150105001 cn: SCREWDRIVER MODULE cn2: SCREWDRIVER MODULE cn_clear: SCREWDRIVERMODULE d: Product description Durable foam insert; two-coloured for quick identification of missing parts; suitable for the Tool Rebel roller cabinet. Equipped with 13 Wera Kraftform chiseldrivers. Durable foam insert, each tool has its own place; two-coloured, missing tools will quickly be noticed High-quality, durable foam insert without chemical vapours 13 chiseldrivers for screwdriving, chiseling, mortising Hexagonal blade extending through the handle Impact cap and bolster for the transfer of higher torque 13-piece Wera Kraftform The Chiseldriver set in a two-coloured foam insert for the Tool Rebel roller cabinet. Width x height x depth: without tools 344 x 30 x 392 mm, with tools 344 x 46 x 392 mm. Features and benefits The tools sit securely in the foam thanks to precise contour cutouts, but are easy to remove. The carefully designed arrangement of the tools ensures space-saving storage and quick access to each tool. After removing the tool the light grey second foam becomes visible and therefore missing tools are quickly identified. Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. ds: dsc: Scope of delivery 9714 Foam insert The Chiseldriver screwdriver set 1, 13 pieces 3x 917 SPH Screwdriver for Phillips screws: PH 1x80 mm, PH 2x100 mm, PH 3x150 mm 3x 918 SPZ Screwdriver for Pozidriv screws: PZ 1x80 mm, PZ 2x100 mm, PZ 3x150 mm 5x 932 A Screwdriver for slotted screws: 0.6x3.5x80 mm, 0.8x4.5x90 mm, 1x5.5x100 mm, 1.2x7x125 mm, 1.6x9x150 mm 2x 977 Screwdriver for TORX® screws: TX 20x90 mm, TX 25x100 mm 1x 9814 Foam insert The Chiseldriver screwdriver set 1, empty: 344 x 30 x 392 mm kts: screw chisel/screwdriver set 1 in foam insert, 13-piece kpn: 9714 kpn_dash: kpn_clear: 9714 bkpn: WERA 9714 bkpn_clear: WERA 9714 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver module | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver module sr_no_br_cl_ns: 05150105001 sr_ns: WERA05150105001
r: 03226473 p: 88.264 pid: 69762 b: WERA q: 0 st: lt: 13 ean: 4013288220745 sr: WERA 05004190001 sr_no_br: 05004190001 sr_no_br_cl: 05004190001 sr_cl: WERA05004190001 sr_dash: sold: 353.056 p_range: none type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Quantity per set 14 n: WERA Bicycle Big Pack 1 screwdriver set 14-piece - 05004190001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description Immediately find the suitable tool for many bicycle screws: Screwdriver all-round set with 7 T-handle screwdrivers, 5 Kraftform screwdrivers and 2 chiseldrivers with impact cap. Kraftform Plus handle for comfortable ergonomic screwdriving, which avoids blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. PH-screwdrivers with Lasertip: The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface "bites" into the screw head and unintentional slipping is a thing of the past. Take it easy tool finder with colour coding by profile and size stamping - to help you find the required tool quickly and easily. T-handles with holding function to hold the hexagonal socket screw securely on the tool. Bicycle tool set With 7 T-handle screwdrivers, 5 Kraftform screwdrivers and 2 chiseldrivers with impact cap T-handle screwdriver for the transmission of particularly high tightening and loosening torque T-handle screwdriver with holding function on the long arm for a secure hold of the screw on the tool PH screwdriver with Lasertip tip for better hold on the screw head 14-piece screwdriver set for bicycle applications2x 354 Hex-Plus screwdrivers for hexagonal socket screws, 5x 454 HF T-handle screwdrivers with long and short arm with holding function for hexagonal socket screws at the long arm, 1x 367 screwdriver for TORX® screws, 2x T-handle screwdrivers with long and short arm with holding function for TORX® screws at the long arm as per Acument Intellectual Properties specifications, 2x 350 PH screwdrivers with Lasertip for Philips-head screws; with Take it easy tool finder: Colour coding by profile and size stamping, 2x 932 A chiseldrivers with pound-thru hexagon blade and integrated impact cap. 2 racks for storage. Features and benefits A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. The ergonomic design of the T-handle fills the palm of the hand. The fingers rest in the soft, rounded recess, and the whole hand is in contact with the handle - so there is no friction loss between the hand and handle. A spring loaded ball ensures the hexagon socket screw to be clamped on the tool tip. Especially helpful in hard to reach areas where you can not use your other hand to hold the screw. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! The additional short arm, which emerges laterally from the handle, allows the transmission of extremely high torques by using the long arm as a lever. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The chiseldriver is the solution for jobs that require more than just screwdriving. For fastening, chiselling and loosening seized screws or hose clamps. With an integrated impact cap that extends service live and reduces the risk of splintering. With a pound-thru hexagon blade made from high-grade material for - zero-loss transfer of high forces when struck with a hammer. The tough viscous tempered material prevents the blade from splintering or breaking. More TORQUE can be transferred by attaching an open-jawed or ring spanner to the integrated hexagon bolster. ds: dsc: Scope of delivery Bicycle Big Pack 1, 14 pieces 2x 354 Screwdriver for hexagon socket screws: 2x75 mm, 2.5x75 mm 5x 454 HF T-handle hexagon screwdriver Hex-Plus with holding function: 3x100 mm, 4x150 mm, 5x150 mm, 6x200 mm, 8x200 mm 1x 367 Screwdriver for TORX® screws: TX 10 x 80 mm 2x 467 TORX® HF T-handle screwdriver with holding function: TX 20x100 mm, TX 25x200 mm 2x 932 A Screwdriver for slotted screws: 1x5.5x100 mm, 1.2x7x125 mm 2x 350 PH Screwdriver for Phillips screws: PH 1x80 mm, PH 2x100 mm kts: screwdriver set 14-piece kpn: Bicycle Big Pack 1 kpn_dash: kpn_clear: BicycleBigPack1 bkpn: WERA Bicycle Big Pack 1 bkpn_clear: WERA BicycleBigPack1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set sr_no_br_cl_ns: 05004190001 sr_ns: WERA05004190001
r: 02813969 p: 38.677 pid: 18501 b: WERA q: 0 st: lt: 8 ean: 4013288163394 sr: WERA 05057688001 sr_no_br: 05057688001 sr_no_br_cl: 05057688001 sr_cl: WERA05057688001 sr_dash: sold: 348.093 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Torx Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 10 Product Range Wera Bit-Check n: WERA Bit-Check 10 TX Impaktor 1 screwdriver bit set 10-piece - 05057688001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description Robust Bit-Check by Wera. Bit-Checks provide a quick overview of the tools available. Bits not needed are simply reinserted into the set and do not get lost. Simple transportation e.g. in the shirt pocket. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle coating on the bit tip, prevents any slipping out of the screw head. Impakt holder for the absorption of extreme impulse peaks. Special torsion effect due to the double-torsion spring. Comes with a ring magnet that holds even long and heavy screws extremely securely, making it ideal for overhead work. The magnet can be pushed back and thereby neutralised. Particularly suitable for use with customary impact drivers. Upright positionable, multi-component Bit-Check Impaktor technology for above-average service life Particularly suitable for use with customary impact drivers Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out Holder with ring magnet for holding longer and heavier screws 1 Impaktor holder with retaining ring and ring magnet in the chuck for a secure fit of the bits in the holder, 9 Impaktor bits. The Take it easy Bit-Checks have bits with a sleeve which - from its colour and size designation - make it simple to access the right bit quickly. Features and benefits The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. For use with impact screwdrivers. Improve productivity when screwdriving with power tools. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. For an above-average service life. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Another product advantage is the coating of the Impaktor bits with minute diamond particles. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. Torsion zone specially designed to absorb such forces and thereby protect the bit tip. The Impaktor holder with ring magnet additionally holds longer and heavier screws absolutely securely. This enables a speedy and dependable positioning of the screw. It is also ideal for above-head work. Should the magnet function not be required in a particular situation e.g. when working with metal, it can be extracted from the screwdriving area and can thereby be "disabled". Mainly used in manual power tool applications. The combination of the double torsion zones in the Impaktor holder and the torsion zone in the Impaktor bit results in the so-called TriTorsion system. The Take it easy Bit-Checks have bits with a sleeve which - from its colour (e.g. red = Phillips) and size designation - make it simple to access the right bit quickly. ds: dsc: Scope of delivery Bit-Check 10 TX Impaktor 1, 10 pieces 1x 897/4 IMP R Impaktor holder with retaining ring and ring magnet: 1/4" x 75 mm 9x 867/1 IMP DC Impaktor TORX® bits: 3x TX 20x25 mm, 3x TX 25x25 mm, 2x TX 30x25 mm, TX 40x25 mm kts: screwdriver bit set 10-piece kpn: Bit-Check 10 TX Impaktor 1 kpn_dash: Bit kpn_clear: BitCheck10TXImpaktor1 bkpn: WERA Bit-Check 10 TX Impaktor 1 bkpn_clear: WERA BitCheck10TXImpaktor1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05057688001 sr_ns: WERA05057688001
r: 41071272 p: 34.545 pid: 70509 b: WERA q: 0 st: lt: 10 ean: 4013288100764 sr: WERA 05028059001 sr_no_br: 05028059001 sr_no_br_cl: 05028059001 sr_cl: WERA05028059001 sr_dash: sold: 345.45 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive type Torx VDE approved No With safety colour code 1000V No Supplied in Storage box Quantity per set 6 Product Range Wera Kraftform n: WERA 367/6 TORX HF Kraftform Plus screwdriver set with holding function in holder 6-piece - 05028059001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 6-piece screwdriver set for TORX® screws. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Holding function: the wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screw on the tool. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Handle markings for simplified finding and sorting of the tool. Screwdriver for TORX® screws; holding function Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Holding function for TORX® screws, chrome-plated Application TORX®, with holding function for TORX® screws made according to Acument Intellectual Properties specifications Content 6-piece set and rack in display carton Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 367/6 TORX® HF Kraftform Plus Screwdriver set with holding function and rack, 6 pieces 6x 367 TORX® HF Screwdriver with holding function for TORX® screws: TX 10x80 mm, TX 15x80 mm, TX 20x100 mm, TX 25x100 mm, TX 30x115 mm, TX 40x130 mm kts: Kraftform Plus screwdriver set with holding function in holder 6-piece kpn: 367/6 TORX HF kpn_dash: kpn_clear: 3676TORXHF bkpn: WERA 367/6 TORX HF bkpn_clear: WERA 3676TORXHF c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05028059001 sr_ns: WERA05028059001
