r: 03048607 p: 11.735 pid: 41128 b: 3M - SCOTCH-BRITE q: 707 st: 1 lt: 1 ean: 04054596628007 sr: 3M - SCOTCH-BRITE 7100192330 sr_no_br: 7100192330 sr_no_br_cl: 7100192330 sr_cl: 3MSCOTCHBRITE7100192330 sr_dash: 3M sold: 1807.19 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 115 mm (Disc) attachment Bore hole Bore size 22,2 mm Perforated No For material Metal; Paint Series Scotch-Brite Grit size Extra coarse n: 3M - SCOTCH-BRITE 51889 Clean and Strip disc XT-RD Pro, 115 mm x 22 mm, S XCRS - 7100192330 cn: ABRASIVE DISC cn2: ABRASIVE DISC cn_clear: ABRASIVEDISC d: Product description Quickly removes rust, paint, mill scale and coatings from metal High-quality fibres resist crumbling and perform well on edges High degree of formability ensures larger contact area and faster material removal Silicon carbide-based abrasive provides intensive cutting action with a fine finish Resistant to flooding for consistent cutting action Scotch-Brite Clean & Strip XT Pro Disc contains a silicon carbide-based abrasive mineral embedded in an open nylon web structure. Our discs effectively remove rust, paint, mill scale, coatings and adhesives from surfaces without dramatically altering the base material. You can have greater formability without compromising strength when preparing metal surfaces or removing rust and paint with Scotch-Brite Clean & Strip XT Pro Disc. Our discs feature a combination of innovated fibre threads, resin and a silicon carbide-based abrasive mineral to form a thick, open web. The elastic nature of the fibres means these discs can follow the contours of the workpiece with greater precision to achieve a larger contact area for faster material removal. They adapt to welds so that they can be sanded without removal, and they allow access to hard-to-reach areas without damaging the substrate. Silicon carbide cuts more intensely, ensuring a fine finish. Unwanted burrs, dirt and contaminants are effectively removed while at the same time maintaining the geometry of the workpiece, reducing the need for extra work and increasing productivity. Moreover, the abrasive can escape through holes in the web, reducing clogging of the abrasive. The disc's reinforcing resin is gradually broken down through use to release new fibres and super-sharp silicon carbide-based abrasive material, ensuring consistent cutting action over the life of the disc. The high-quality fibres resist chipping and perform well on edges. These discs also provide low vibration and reduced sparks, operate at high speed and feature a long service life. Suggested applications Removing rust, paint, mill scale, coatings and adhesive residues and surface preparation Ideal for applications under light pressure ds: dsc: kts: Clean and Strip disc XT-RD Pro, 115 mm x 22 mm, S XCRS kpn: 51889 kpn_dash: kpn_clear: 51889 bkpn: 3M - SCOTCH-BRITE 51889 bkpn_clear: 3M - SCOTCH-BRITE 51889 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Abrasive disc | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite abrasive disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 7100192330 sr_ns: 3M-SCOTCH-BRITE7100192330
r: 57110437 p: 2.77 pid: 41288 b: 3M - SCOTCH-BRITE q: 150 st: 1 lt: 1 ean: 00048011055312 sr: 3M - SCOTCH-BRITE 7000000755 sr_no_br: 7000000755 sr_no_br_cl: 7000000755 sr_cl: 3MSCOTCHBRITE7000000755 sr_dash: 3M sold: 1196.64 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 76,2 mm Grit size Medium (Disc) attachment TR roloc Bore size Perforated No For material Metal Series Scotch-Brite n: 3M - SCOTCH-BRITE 5531 Roloc Surface Conditioning disc SC-DR, 76 mm, A MED - 7000000755 cn: ABRASIVE DISC cn2: ABRASIVE DISC cn_clear: ABRASIVEDISC d: Product description Tough non-woven disc that aggressively deburrs and finishes. Flexible, non-woven disc combined with Roloc backing for aggressive grinding. Open-web construction resists crowding and heating for a consistent finish. 3M Roloc attachment system offers quick and easy disc changes The Scotch-Brite Roloc Surface Conditioning Disc SC-DR combines our durable non-woven disc with the efficiency of the 3M Roloc attachment that allows quick disc changes for cleaning, finishing, blending and deburring. Our non-woven fibre construction is excellent for maintaining irregular or contoured surfaces and the Roloc backing supports the disc for aggressive cutting work. Use Scotch Brite Roloc Surface Conditioning Disc for a range of tasks, including blending, deburring and finishing. Our non-woven discs use a fast-cutting alumina mineral and are made of a fibre that adapts well to work irregular or shaped surfaces while maintaining shape. This combined with an efficient 3M Roloc quick-change system to support the disc during tough jobs. The discs' open web ensures little heat build-up and resists clogging, reducing the risk of discolouration and warping of parts. Aluminium oxide abrasives cut quickly and provide a consistent finish. Tough, durable and wear-resistant alumina continuously breaks apart during use to expose new cutting edges. By comparison, traditional abrasives, such as garnet, wear out much faster during use. Due to its high cutting speed, hardness, strength and low heat build-up, alumina mineral is a popular choice for applications in grinding, sanding and finishing. It is suitable for use on a wide range of substrates in both woodworking and metalworking, including ferroalloys. Scotch Brite Surface Conditioning products contain abrasives incorporated into non-woven nylon or synthetic fibres. Combining abrasives with the fibres creates an abrasive system that produces consistent results for the life of the product. The fibres are resistant to clogging, allowing abrasive minerals to maintain high performance, which also extends the life of the disc. 3M Roloc TR quick-change discs are smaller discs with a plastic threaded knob or screw that is designed to easily and quickly screw onto a Roloc TR support disc*, making it easy to change discs with a simple twist. The Roloc TR system offers secure attachment, even for heavy-duty applications, and the variety of 3M Roloc discs available allows changing from one application to the next in seconds. *Sold separately ds: dsc: kts: Roloc Surface Conditioning disc SC-DR, 76 mm, A MED kpn: 5531 kpn_dash: kpn_clear: 5531 bkpn: 3M - SCOTCH-BRITE 5531 bkpn_clear: 3M - SCOTCH-BRITE 5531 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Abrasive disc | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite abrasive disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 7000000755 sr_ns: 3M-SCOTCH-BRITE7000000755
r: 57110487 p: 11.404 pid: 43151 b: 3M - SCOTCH-BRITE q: 49 st: 1 lt: 1 ean: 04046719750788 sr: 3M - SCOTCH-BRITE 7000077901 sr_no_br: 7000077901 sr_no_br_cl: 7000077901 sr_cl: 3MSCOTCHBRITE7000077901 sr_dash: 3M sold: 1071.976 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 100 mm Thickness 25 mm (Disc) attachment Shank Bore size 6 mm Perforated No For material Varnish Series Scotch-Brite Grit size Extra coarse n: 3M - SCOTCH-BRITE 61168 Clean & Strip disc CG-ZS on marker, blue, 100 mm x 25 mm x 6 mm, S XCRS - 7000077901 cn: ABRASIVE DISC cn2: ABRASIVE DISC cn_clear: ABRASIVEDISC d: Product description For quick removal of coatings, rust and paint Non-woven material aggressively removes coating without damaging the base material. Prevents the need for additional cleaning work on the treated surface. Safe for the user Roloc attachment system allows quick and easy disc changes in multi-step finishing processes Aggressively removes paint and rust from most substrates without damaging the workpiece Well-suited for use in hard-to-reach areas. 3-dimensional web that can withstand loads. Safer than steel brushes. Use the Scotch-Brite Roloc Clean and Strip disc to aggressively remove paint and rust from seams, door jambs, trim and pinch welds and other tight places. Our XT discs feature the Roloc mounting system for quick and easy disc changes: ideal in multi-step finishing processes. The disc is quickly mounted on holder and pad* which is then attached to abrasive tools such as straight grinders and angle grinders. The discs bind silicon carbide mineral and non woven nylon fibres using a resin that dissolves and breaks down over time, keeping the abrasive strong and heat-resistant. Silicon carbide is a very sharp synthetic abrasive generally used in low-pressure applications such as paint preparation. The material breaks down faster than aluminium oxide, for a superior finish. The extra coarse (XCS) mineral works hard to remove unwanted corrosion and imperfections from various substrates. It aggressively removes paint and rust from seams, door jambs, drip rails, pinch welds and other hard-to-reach areas. The non-woven technology makes Scotch-Brite industrial abrasives unique. We combine strands, synthetic resin and abrasive mineral to form a thick, open web. The springy property of the fibres responds to contours and effectively removes unwanted burrs, dirt and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and increases productivity. The abrasive can escape through holes in the web, preventing particles from clogging the mineral. Fibres in the web constantly break down during use so that fresh minerals are exposed. This ensures exceptional consistency, superior cutting performance and extremely long service life. From aesthetic finishing to blending welds, deburring and more: Scotch-Brite abrasives work quickly and deliver consistent results, part after part. *Sold separately ds: dsc: kts: Clean & Strip disc CG-ZS on marker, blue, 100 mm x 25 mm x 6 mm, S XCRS kpn: 61168 kpn_dash: kpn_clear: 61168 bkpn: 3M - SCOTCH-BRITE 61168 bkpn_clear: 3M - SCOTCH-BRITE 61168 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Abrasive disc | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite abrasive disc sr_no_br_cl_ns: 7000077901 sr_ns: 3M-SCOTCH-BRITE7000077901
r: 57110375 p: 5.83 pid: 41643 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 00048011183503 sr: 3M - SCOTCH-BRITE 7000046009 sr_no_br: 7000046009 sr_no_br_cl: 7000046009 sr_cl: 3MSCOTCHBRITE7000046009 sr_dash: 3M sold: 932.8 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 76,2 mm (Disc) attachment TR roloc Bore size Perforated No For material Varnish Series Scotch-Brite Grit size Extra coarse n: 3M - SCOTCH-BRITE 18350 Roloc Coating Removal Disc, CR-DR, 76 mm, S XCS, 40/box, PN - 7000046009 cn: ABRASIVE DISC cn2: ABRASIVE DISC cn_clear: ABRASIVEDISC d: Product description Removes coatings and prepares surfaces more effectively than steel brushes. Cleans weld skin, discolourations and seams. Non-woven material aggressively removes coating without damaging the base material. Open-web construction resists flooding and heating for a consistent finish. Velcro connection system to quickly change discs in multi-step finishing processes Scotch-Brite Roloc Coating Removal Disc CR-DR features extra coarse silicon carbide abrasive material to effectively remove paint and rust from metal surfaces and welds. Together with the flexible non-woven material, the abrasive removes coatings without grooving, cutting or damaging the base material, especially on hard surfaces. Use the Scotch Brite Roloc Coating Removal Disc to efficiently remove coatings without damaging the base material. Our discs are great for hard surfaces. They are a good alternative to wire brushes, have a larger surface area and are safer as no wires can come loose. Velcro tape ensures a secure attachment of the disc. The open web structure keeps the discs cool and makes them less likely to fill up. The abrasive keeps working better and results remain consistent throughout the life of the disc. Scotch Brite Roloc Discs for removing coatings are equipped with the Roloc TR function to quickly attach and remove the discs. This allows the discs to be quickly changed during multi-step finishing processes. These discs use silicon carbide-based abrasive material, a very sharp synthetic mineral widely used in low-pressure applications such as paint preparation. The material breaks down faster than aluminium oxide, for a superior finish. Scotch Brite industrial abrasives are unique surface treatment products where the abrasive material is embedded in non-woven nylon or other synthetic fibres. The combination of abrasive material in fibres creates an abrasive system that delivers consistent results throughout the life of the product. The open web material is full web resistant and maintains high performance of the abrasive minerals by reducing fibre clogging. Roloc TR Quick Change Discs are smaller discs with a threaded plastic knob or screw for quick and easy attachment to a 3M Roloc TR Backing Disc*. They allow discs to be changed quickly with a simple twist. The Roloc TR system ensures secure attachment even in heavy duty applications. We have an extensive range of Roloc discs, allowing users to switch applications in seconds. *Sold separately ds: dsc: kts: Roloc Coating Removal Disc, CR-DR, 76 mm, S XCS, 40/box, PN kpn: 18350 kpn_dash: kpn_clear: 18350 bkpn: 3M - SCOTCH-BRITE 18350 bkpn_clear: 3M - SCOTCH-BRITE 18350 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Abrasive disc | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite abrasive disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 7000046009 sr_ns: 3M-SCOTCH-BRITE7000046009
r: 57110485 p: 13.884 pid: 41669 b: 3M - SCOTCH-BRITE q: 41 st: 1 lt: 1 ean: 4046719750092 sr: 3M - SCOTCH-BRITE 7100093983 sr_no_br: 7100093983 sr_no_br_cl: 7100093983 sr_cl: 3MSCOTCHBRITE7100093983 sr_dash: 3M sold: 846.924 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 150 mm Thickness 13 mm (Disc) attachment Shank Bore size 8 mm Perforated No For material Varnish Series Scotch-Brite Grit size Extra coarse n: 3M - SCOTCH-BRITE 57017 Clean & Strip disc CG-ZS, 150 mm x 13 mm x 8 mm, S XCRS - 7100093983 cn: ABRASIVE DISC cn2: ABRASIVE DISC cn_clear: ABRASIVEDISC d: Product description Removes flat and rust quickly without affecting workpiece geometry Material that resists flooding avoids clogging for consistent cutting action Resistant to streaking to minimise work surface cleaning Extra coarse silicon carbide (XCS) provides aggressive cutting action and leaves a fine finish without grooves in the workpiece The Roloc attachment system allows quick and easy disc changes in multi-step finishing processes The Scotch-Brite Roloc Clean and Strip disc uses a long-life abrasive material that combines silicon carbide with non-woven nylon fibres through a synthetic resin that dissolves and degrades over time. Our discs are designed for aggressive cleaning without changing the base material. Use the Scotch-Brite Roloc Clean and Strip disc to aggressively remove paint and rust from seams, door jambs, trim and pinch welds and other tight places. Our XT discs feature the Roloc mounting system for quick and easy disc changes: ideal in multi-step finishing processes. The disc is quickly mounted on holder and pad* which is then attached to abrasive tools such as straight grinders and angle grinders. The discs bind silicon carbide mineral and non woven nylon fibres using a resin that dissolves and breaks down over time, keeping the abrasive strong and heat-resistant. Silicon carbide is a very sharp synthetic abrasive generally used in low-pressure applications such as paint preparation. The material breaks down faster than aluminium oxide, for a superior finish. The extra coarse (XCS) mineral works hard to remove unwanted corrosion and imperfections from various substrates. It aggressively removes paint and rust from seams, door jambs, drip rails, pinch welds and other hard-to-reach areas. The non-woven technology makes Scotch-Brite industrial abrasives unique. We combine strands, synthetic resin and abrasive mineral to form a thick, open web. The springy property of the fibres responds to contours and effectively removes unwanted burrs, dirt and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and increases productivity. The abrasive can escape through holes in the web, preventing particles from clogging the mineral. Fibres in the web constantly break down during use so that fresh minerals are exposed. This ensures exceptional consistency, superior cutting performance and extremely long service life. From aesthetic finishing to blending welds, deburring and more: Scotch-Brite abrasives work quickly and deliver consistent results, part after part. *Sold separately ds: dsc: kts: Clean & Strip disc CG-ZS, 150 mm x 13 mm x 8 mm, S XCRS kpn: 57017 kpn_dash: kpn_clear: 57017 bkpn: 3M - SCOTCH-BRITE 57017 bkpn_clear: 3M - SCOTCH-BRITE 57017 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Abrasive disc | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite abrasive disc sr_no_br_cl_ns: 7100093983 sr_ns: 3M-SCOTCH-BRITE7100093983
r: 57110428 p: 6.95 pid: 43126 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 04001895727566 sr: 3M - SCOTCH-BRITE 7100233804 sr_no_br: 7100233804 sr_no_br_cl: 7100233804 sr_cl: 3MSCOTCHBRITE7100233804 sr_dash: 3M sold: 834 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 178 mm (Disc) attachment Hook and loop Bore size Perforated No For material Metal Series Scotch-Brite Grit size Medium n: 3M - SCOTCH-BRITE 3758 Surface conditioning disc SC-DH, 178 mm x NH, A MED - 7100233804 cn: ABRASIVE DISC cn2: ABRASIVE DISC cn_clear: ABRASIVEDISC d: Product description Variation of grooves and sizes provides an excellent starting point for cleaning, finishing, blending and light deburring. The open web material stays cool in use and is full-flow resistant for long-term use. The highly deformable disc conditions surfaces without grooving, eroding or damaging the base material. Suitable for metal, composites, plastic and other materials Velcro attachment system for quick disc replacement in finishing processes with more steps The Scotch-Brite Surface Conditioning Disc is a durable, non-woven disc for the first step in cleaning, blending, deburring and finishing processes. Our discs perform well on contoured and uneven surfaces, without eroding or damaging the base material. Our fast-cutting the Scotch-Brite SL Surface Conditioning Disc is an ideal first step in cleaning, blending, deburring and finishing. The open web material of our discs stays cool in use and is full-body resistant, for long-lasting use. The evenly spaced aluminium oxide abrasive grains offer high speed for consistent finishing. Our surface conditioning discs use aluminium oxide abrasive grit, preferred by industrial professionals for its fast cut and long life. The abrasive grain is strong, durable and breaks down during use to create new cutting edges all the time for a more efficient cut, compared to traditional abrasive grains, such as garnet, which wear out quickly during use. Alumina mineral is strong, tough, has a high cutting speed and retains little heat. It is widely used for polishing, sanding and finishing - on numerous substrates in both wood and metalworking, including ferroalloys. Scotch-Brite Industrial Abrasives are unique surface conditioning products in which abrasive grains are mixed with non-woven nylon or synthetic fibres. This creates an abrasive system that delivers consistent results over the life of the product. The open web material remains cool during use and is full-bodied. This reduces fibre clogging and maintains high performance of the abrasive minerals. Suggested applications Use for fast cutting and as an efficient first step in cleaning, blending, deburring and finishing Suitable for metal, composites, plastic and other materials ds: dsc: kts: Surface conditioning disc SC-DH, 178 mm x NH, A MED kpn: 3758 kpn_dash: kpn_clear: 3758 bkpn: 3M - SCOTCH-BRITE 3758 bkpn_clear: 3M - SCOTCH-BRITE 3758 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Abrasive disc | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite abrasive disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 7100233804 sr_ns: 3M-SCOTCH-BRITE7100233804
r: 57111104 p: 8.33 pid: 45395 b: 3M - SCOTCH-BRITE q: 0 st: lt: 6 ean: 04046719750894 sr: 3M - SCOTCH-BRITE 7000077890 sr_no_br: 7000077890 sr_no_br_cl: 7000077890 sr_cl: 3MSCOTCHBRITE7000077890 sr_dash: 3M sold: 583.1 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 75 mm Thickness 13 mm (Disc) attachment Shank Bore size 6 mm Perforated No For material Varnish Series Scotch-Brite Grit size Extra coarse n: 3M - SCOTCH-BRITE 61164 Clean & Strip disc CG-ZS on stylus, blue, 75 mm x 13 mm x 6 mm, S XCRS - 7000077890 cn: ABRASIVE DISC cn2: ABRASIVE DISC cn_clear: ABRASIVEDISC d: Product description For quick removal of coatings, rust and paint Non-woven material aggressively removes coating without damaging the base material. Prevents the need for additional cleaning work on the treated surface. Safe for the user Roloc attachment system allows quick and easy disc changes in multi-step finishing processes Aggressively removes lacquer and rust from most substrates without damaging the workpiece Well-suited for use in hard-to-reach areas. 3-dimensional web that can withstand loads. Safer than steel brushes. Use the Scotch-Brite Roloc Clean and Strip disc to aggressively remove paint and rust from seams, door jambs, trim and pinch welds and other tight places. Our XT discs feature the Roloc mounting system for quick and easy disc changes: ideal in multi-step finishing processes. The disc is quickly mounted on holder and pad* which is then attached to abrasive tools such as straight grinders and angle grinders. The discs bind silicon carbide mineral and non woven nylon fibres using a resin that dissolves and breaks down over time, keeping the abrasive strong and heat-resistant. Silicon carbide is a very sharp synthetic abrasive generally used in low-pressure applications such as paint preparation. The material breaks down faster than aluminium oxide, for a superior finish. The extra coarse (XCS) mineral works hard to remove unwanted corrosion and imperfections from various substrates. It aggressively removes paint and rust from seams, door jambs, drip rails, pinch welds and other hard-to-reach areas. The non-woven technology makes Scotch-Brite industrial abrasives unique. We combine strands, synthetic resin and abrasive mineral to form a thick, open web. The springy property of the fibres responds to contours and effectively removes unwanted burrs, dirt and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and increases productivity. The abrasive can escape through holes in the web, preventing particles from clogging the mineral. Fibres in the web constantly break down during use so that fresh minerals are exposed. This ensures exceptional consistency, superior cutting performance and extremely long service life. From aesthetic finishing to blending welds, deburring and more: Scotch-Brite abrasives work quickly and deliver consistent results, part after part. *Sold separately ds: dsc: kts: Clean & Strip disc CG-ZS on stylus, blue, 75 mm x 13 mm x 6 mm, S XCRS kpn: 61164 kpn_dash: kpn_clear: 61164 bkpn: 3M - SCOTCH-BRITE 61164 bkpn_clear: 3M - SCOTCH-BRITE 61164 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Abrasive disc | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite abrasive disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 7000077890 sr_ns: 3M-SCOTCH-BRITE7000077890
r: 02059643 p: 4.06 pid: 40974 b: 3M - SCOTCH-BRITE q: 0 st: lt: 4 ean: 00048011366463 sr: 3M - SCOTCH-BRITE 7100138329 sr_no_br: 7100138329 sr_no_br_cl: 7100138329 sr_cl: 3MSCOTCHBRITE7100138329 sr_dash: 3M sold: 487.2 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 150 mm Grit size Very fine (Disc) attachment Hook and loop Bore size Perforated No For material Metal Series Scotch-Brite n: 3M - SCOTCH-BRITE 29293 Scotch Brite Hookit Production Clean and Finish disc PR-HA, 150 mm, A VFN - 7100138329 cn: ABRASIVE DISC cn2: ABRASIVE DISC cn_clear: ABRASIVEDISC d: Product description High cutting efficiency provides fine finishing, polishing, preparation for paintwork and sanding on a wide variety of surfaces. 3M Hookit quick-change system provides the ability to quickly change discs in multi-step applications. Provides a good finish to sand primer, metal and solid surfaces. 3D structure ensures long life and consistent finish Resistance to flooding and heat ensures long-term operation and consistent cutting power over the life of the disc Scotch-Brite Hookit Clean & Finish Sanding Disc PR-HA guarantees excellent cutting power, long life and fine finish and is an effective solution for conditioning aluminium, stainless steel, plastics, wood and fibreglass. Designed for fine finishing, preparing for paintwork and scratch removal, this disc is also suitable for use on irregular surfaces. In doing so, it ensures a clean and consistent finish without damaging the base material. Ensure high cutting action, long life, fine finish and effective conditioning of aluminium, stainless steel, plastics, wood and fibreglass with the Scotch-Brite Hookit Clean and Finish Production Disc. Our discs use an aluminium oxide-based abrasive material, which is a popular choice among industrial professionals for its fast cutting speed and long life. They are unique surface conditioning products, with abrasive grains embedded in non-woven nylon fibres. This mineral is a strong, durable abrasive material that self-breaks during use to expose new cutting edges, whereas traditional abrasives, such as garnet, wear out quickly with use. Due to its high cutting speed, hardness, strength and low heat retention, the alumina mineral is widely used in grinding applications, in addition to sanding and finishing. Aluminium oxide is suitable for numerous substrates in both wood and metalworking, including ferroalloys. Scotch-Brite is a unique surface finishing product with an abrasive material in non-woven nylon fibres. The combination of abrasive material in fibres creates an abrasive system that delivers consistent results throughout the life of the product. The open web material is full web resistant and maintains high performance of the abrasive minerals as the nylon fibres are less likely to clog. We offer a complete range of 3M Hookit Discs with Velcro for workshops where self-adhesive discs can become contaminated by dust, dirt or residue floating around. They are often used in applications where a 3M Stikit Disc might be too aggressive, as Hookit Discs tend to leave finer finishes than discs with adhesive backs. Hookit Sanding Discs adhere conveniently and securely to a Velcro backing disc (sold separately) on an eccentric sander, can be easily removed without leaving residue and can be used again and again throughout their lifetime. ds: dsc: kts: Scotch Brite Hookit Production Clean and Finish disc PR-HA, 150 mm, A VFN kpn: 29293 kpn_dash: kpn_clear: 29293 bkpn: 3M - SCOTCH-BRITE 29293 bkpn_clear: 3M - SCOTCH-BRITE 29293 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Abrasive disc | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite abrasive disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 7100138329 sr_ns: 3M-SCOTCH-BRITE7100138329
r: 57111142 p: 7.45 pid: 45963 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 00048011171944 sr: 3M - SCOTCH-BRITE 7100000871 sr_no_br: 7100000871 sr_no_br_cl: 7100000871 sr_cl: 3MSCOTCHBRITE7100000871 sr_dash: 3M sold: 447 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 50,8 mm (Disc) attachment TR roloc Bore size Perforated No For material Metal; Plastic Series Scotch-Brite Grit size Coarse n: 3M - SCOTCH-BRITE 17194 Roloc EXL Unitised wheel XL-DR, 50 mm x 6 mm, 8A CRS - 7100000871 cn: ABRASIVE DISC cn2: ABRASIVE DISC cn_clear: ABRASIVEDISC d: Product description Unique construction allows for effective edge deburring and finishing The hard density offers good edge retention, which maintains consistent shape and cutting power Soft density offers deformability and flexibility for finishing flat or irregular surfaces without damaging the workpiece Open-web construction with uniform grain distribution and consistent cutting force 3M Roloc fastening system offers quick and easy disc changes Scotch-Brite Roloc Unitised Disc XL-DR is strong and effective for deburring and finishing. Our wheel performs well on a variety of metals in different applications where close tolerances are important. Scotch-Brite Roloc EXL unitised wheels perform well on a variety of metalworking applications and on milled parts with tight tolerances. Use our wheels for professional results when polishing welds, deburring aircraft parts or blending and finishing various metals, plastics and composites. The wheels are available in different coarsenesses, from fine to medium and coarse. They are made of high-density EXL material. This provides a hard structure and aggressive cutting power, making them great for deburring edges and corners without damaging the part. Lower-density versions are soft and deformable, making them suitable for finishing curved surfaces. Discs with the Roloc quick-change system can be quickly and easily attached to a Roloc disc pad*. This allows you to easily switch between different tasks or steps in a finishing process. The Roloc system provides a secure attachment even in heavy-duty applications, and the wide range of 3M Roloc discs allows the user to change discs - and applications - in seconds. The discs allow you to use both the edge and surface of the wheel without the fastening mechanism getting in the way. Scotch-Brite's surface finishing products consist of an abrasive material in non-woven nylon or synthetic fibres. Combining abrasive minerals with fibres creates an abrasive system that delivers consistent results throughout the life of the product. The open web structure of the material ensures a lower operating temperature and less risk of discolouration and deformation of parts. The fibres do not fill up easily and ensure the powerful performance of the mineral abrasive by preventing fibre flooding. This also extends the life of the disc. Suggested applications For a wide range of metalworking applications For polishing welds, deburring aircraft parts or blending and finishing various metals, plastics and composites ds: dsc: kts: Roloc EXL Unitised wheel XL-DR, 50 mm x 6 mm, 8A CRS kpn: 17194 kpn_dash: kpn_clear: 17194 bkpn: 3M - SCOTCH-BRITE 17194 bkpn_clear: 3M - SCOTCH-BRITE 17194 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Abrasive disc | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite abrasive disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 7100000871 sr_ns: 3M-SCOTCH-BRITE7100000871
r: 57110490 p: 11.735 pid: 43155 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 53134375451760 sr: 3M - SCOTCH-BRITE 7100093984 sr_no_br: 7100093984 sr_no_br_cl: 7100093984 sr_cl: 3MSCOTCHBRITE7100093984 sr_dash: 3M sold: 422.46 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 150 mm Thickness 13 mm (Disc) attachment TR roloc Bore size Perforated No For material Varnish Series Scotch-Brite Grit size Extra coarse n: 3M - SCOTCH-BRITE 57019 Roloc+ Clean & Strip disc CG-ZR, blue, 150 mm x 13 mm, S XCRS - 7100093984 cn: ABRASIVE DISC cn2: ABRASIVE DISC cn_clear: ABRASIVEDISC d: Product description Removes flat and rust quickly without affecting workpiece geometry Material that resists flooding avoids clogging for consistent cutting action Resistant to streaking to minimise work surface cleaning Extra coarse silicon carbide (XCS) provides aggressive cutting action and leaves a fine finish without grooves in the workpiece The Roloc attachment system allows quick and easy disc changes in multi-step finishing processes The Scotch-Brite Roloc Clean and Strip disc uses a long-life abrasive material that combines silicon carbide with non-woven nylon fibres through a synthetic resin that dissolves and degrades over time. Our discs are designed for aggressive cleaning without changing the base material. Use the Scotch-Brite Roloc Clean and Strip disc to aggressively remove paint and rust from seams, door jambs, trim and pinch welds and other tight places. Our XT discs feature the Roloc mounting system for quick and easy disc changes: ideal in multi-step finishing processes. The disc is quickly mounted on holder and pad* which is then attached to abrasive tools such as straight grinders and angle grinders. The discs bind silicon carbide mineral and non woven nylon fibres using a resin that dissolves and breaks down over time, keeping the abrasive strong and heat-resistant. Silicon carbide is a very sharp synthetic abrasive generally used in low-pressure applications such as paint preparation. The material breaks down faster than aluminium oxide, for a superior finish. The extra coarse (XCS) mineral works hard to remove unwanted corrosion and imperfections from various substrates. It aggressively removes paint and rust from seams, door jambs, drip rails, pinch welds and other hard-to-reach areas. The non-woven technology makes Scotch-Brite industrial abrasives unique. We combine strands, synthetic resin and abrasive mineral to form a thick, open web. The springy property of the fibres responds to contours and effectively removes unwanted burrs, dirt and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and increases productivity. The abrasive can escape through holes in the web, preventing particles from clogging the mineral. Fibres in the web constantly break down during use so that fresh minerals are exposed. This ensures exceptional consistency, superior cutting performance and extremely long service life. From aesthetic finishing to blending welds, deburring and more: Scotch-Brite abrasives work quickly and deliver consistent results, part after part. *Sold separately ds: dsc: kts: Roloc+ Clean & Strip disc CG-ZR, blue, 150 mm x 13 mm, S XCRS kpn: 57019 kpn_dash: kpn_clear: 57019 bkpn: 3M - SCOTCH-BRITE 57019 bkpn_clear: 3M - SCOTCH-BRITE 57019 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Abrasive disc | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite abrasive disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 7100093984 sr_ns: 3M-SCOTCH-BRITE7100093984
r: 57111385 p: 2.77 pid: 45466 b: 3M - SCOTCH-BRITE q: 25 st: 1 lt: 1 ean: 00048011055305 sr: 3M - SCOTCH-BRITE 7000000754 sr_no_br: 7000000754 sr_no_br_cl: 7000000754 sr_cl: 3MSCOTCHBRITE7000000754 sr_dash: 3M sold: 415.5 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 76,2 mm (Disc) attachment TR roloc Bore size Perforated No For material Metal Series Scotch-Brite Grit size Very fine n: 3M - SCOTCH-BRITE 5530 Roloc Surface Conditioning disc SC-DR, 76 mm, A VFN - 7000000754 cn: ABRASIVE DISC cn2: ABRASIVE DISC cn_clear: ABRASIVEDISC d: Product description Tough non-woven disc that aggressively deburrs and finishes. Flexible, non-woven disc combined with Roloc backing for aggressive grinding. Open-web construction resists crowding and heating for a consistent finish. 3M Roloc attachment system offers quick and easy disc changes The Scotch-Brite Roloc Surface Conditioning Disc SC-DR combines our durable non-woven disc with the efficiency of the 3M Roloc attachment that allows quick disc changes for cleaning, finishing, blending and deburring. Our non-woven fibre construction is excellent for maintaining irregular or contoured surfaces and the Roloc backing supports the disc for aggressive cutting work. Use Scotch Brite Roloc Surface Conditioning Disc for a range of tasks, including blending, deburring and finishing. Our non-woven discs use a fast-cutting alumina mineral and are made of a fibre that adapts well to work irregular or shaped surfaces while maintaining shape. This combined with an efficient 3M Roloc quick-change system to support the disc during tough jobs. The discs' open web ensures little heat build-up and resists clogging, reducing the risk of discolouration and warping of parts. Aluminium oxide abrasives cut quickly and provide a consistent finish. Tough, durable and wear-resistant alumina continuously breaks apart during use to expose new cutting edges. By comparison, traditional abrasives, such as garnet, wear out much faster during use. Due to its high cutting speed, hardness, strength and low heat build-up, alumina mineral is a popular choice for applications in grinding, sanding and finishing. It is suitable for use on a wide range of substrates in both woodworking and metalworking, including ferroalloys. Scotch Brite Surface Conditioning products contain abrasives incorporated into non-woven nylon or synthetic fibres. Combining abrasives with the fibres creates an abrasive system that produces consistent results for the life of the product. The fibres are resistant to clogging, allowing abrasive minerals to maintain high performance, which also extends the life of the disc. 3M Roloc TR quick-change discs are smaller discs with a plastic threaded knob or screw that is designed to easily and quickly screw onto a Roloc TR support disc*, making it easy to change discs with a simple twist. The Roloc TR system offers secure attachment, even for heavy-duty applications, and the variety of 3M Roloc discs available allows changing from one application to the next in seconds. *Sold separately ds: dsc: kts: Roloc Surface Conditioning disc SC-DR, 76 mm, A VFN kpn: 5530 kpn_dash: kpn_clear: 5530 bkpn: 3M - SCOTCH-BRITE 5530 bkpn_clear: 3M - SCOTCH-BRITE 5530 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Abrasive disc | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite abrasive disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 7000000754 sr_ns: 3M-SCOTCH-BRITE7000000754
r: 57110447 p: 6.14 pid: 41030 b: 3M - SCOTCH-BRITE q: 0 st: lt: 6 ean: 00048011171838 sr: 3M - SCOTCH-BRITE 7000045976 sr_no_br: 7000045976 sr_no_br_cl: 7000045976 sr_cl: 3MSCOTCHBRITE7000045976 sr_dash: 3M sold: 368.4 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 50,8 mm (Disc) attachment TR roloc Bore size Perforated No For material Metal Series Scotch-Brite Grit size Fine n: 3M - SCOTCH-BRITE 17183 Roloc EXL Unitised Wheel XL-DR, 50 mm x 6 mm, 2S FIN - 7000045976 cn: ABRASIVE DISC cn2: ABRASIVE DISC cn_clear: ABRASIVEDISC d: Product description Unique construction allows for effective edge deburring and finishing The hard density offers good edge retention, which maintains consistent shape and cutting power Soft density offers deformability and flexibility for finishing flat or irregular surfaces without damaging the workpiece Open-web construction with uniform grain distribution and consistent cutting force 3M Roloc fastening system offers quick and easy disc changes Scotch-Brite Roloc Unitised Disc XL-DR is strong and effective for deburring and finishing. Our wheel performs well on a variety of metals in different applications where close tolerances are important. Scotch-Brite Roloc EXL unitised wheels perform well on a variety of metalworking applications and on milled parts with tight tolerances. Use our wheels for professional results when polishing welds, deburring aircraft parts or blending and finishing various metals, plastics and composites. The wheels are available in different coarsenesses, from fine to medium and coarse. They are made of high-density EXL material. This provides a hard structure and aggressive cutting power, making them great for deburring edges and corners without damaging the part. Lower-density versions are soft and deformable, making them suitable for finishing curved surfaces. Discs with the Roloc quick-change system can be quickly and easily attached to a Roloc disc pad*. This allows you to easily switch between different tasks or steps in a finishing process. The Roloc system provides a secure attachment even in heavy-duty applications, and the wide range of 3M Roloc discs allows the user to change discs - and applications - in seconds. The discs allow you to use both the edge and surface of the wheel without the fastening mechanism getting in the way. Scotch-Brite's surface finishing products consist of an abrasive material in non-woven nylon or synthetic fibres. Combining abrasive minerals with fibres creates an abrasive system that delivers consistent results throughout the life of the product. The open web structure of the material ensures a lower operating temperature and less risk of discolouration and deformation of parts. The fibres do not fill up easily and ensure the powerful performance of the mineral abrasive by preventing fibre flooding. This also extends the life of the disc. Suggested applications For a wide range of metalworking applications For polishing welds, deburring aircraft parts or blending and finishing various metals, plastics and composites ds: dsc: kts: Roloc EXL Unitised Wheel XL-DR, 50 mm x 6 mm, 2S FIN kpn: 17183 kpn_dash: kpn_clear: 17183 bkpn: 3M - SCOTCH-BRITE 17183 bkpn_clear: 3M - SCOTCH-BRITE 17183 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Abrasive disc | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite abrasive disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 7000045976 sr_ns: 3M-SCOTCH-BRITE7000045976
r: 57111129 p: 0.92 pid: 45426 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 00048011153919 sr: 3M - SCOTCH-BRITE 7000021279 sr_no_br: 7000021279 sr_no_br_cl: 7000021279 sr_cl: 3MSCOTCHBRITE7000021279 sr_dash: 3M sold: 368 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 25,4 mm (Disc) attachment TR roloc Bore size Perforated No For material Metal Series Scotch-Brite Grit size Very fine n: 3M - SCOTCH-BRITE 15391 Roloc Surface Conditioning disc SC-DR, 25 mm, A VFN - 7000021279 cn: ABRASIVE DISC cn2: ABRASIVE DISC cn_clear: ABRASIVEDISC d: Product description Tough non-woven disc that aggressively deburrs and finishes. Flexible, non-woven disc combined with Roloc backing for aggressive grinding. Open-web construction resists crowding and heating for a consistent finish. 3M Roloc attachment system offers quick and easy disc changes The Scotch-Brite Roloc Surface Conditioning Disc SC-DR combines our durable non-woven disc with the efficiency of the 3M Roloc attachment that allows quick disc changes for cleaning, finishing, blending and deburring. Our non-woven fibre construction is excellent for maintaining irregular or contoured surfaces and the Roloc backing supports the disc for aggressive cutting work. Use Scotch Brite Roloc Surface Conditioning Disc for a range of tasks, including blending, deburring and finishing. Our non-woven discs use a fast-cutting alumina mineral and are made of a fibre that adapts well to work irregular or shaped surfaces while maintaining shape. This combined with an efficient 3M Roloc quick-change system to support the disc during tough jobs. The discs' open web ensures little heat build-up and resists clogging, reducing the risk of discolouration and warping of parts. Aluminium oxide abrasives cut quickly and provide a consistent finish. Tough, durable and wear-resistant alumina continuously breaks apart during use to expose new cutting edges. By comparison, traditional abrasives, such as garnet, wear out much faster during use. Due to its high cutting speed, hardness, strength and low heat build-up, alumina mineral is a popular choice for applications in grinding, sanding and finishing. It is suitable for use on a wide range of substrates in both woodworking and metalworking, including ferroalloys. Scotch Brite Surface Conditioning products contain abrasives incorporated into non-woven nylon or synthetic fibres. Combining abrasives with the fibres creates an abrasive system that produces consistent results for the life of the product. The fibres are resistant to clogging, allowing abrasive minerals to maintain high performance, which also extends the life of the disc. 3M Roloc TR quick-change discs are smaller discs with a plastic threaded knob or screw that is designed to easily and quickly screw onto a Roloc TR support disc*, making it easy to change discs with a simple twist. The Roloc TR system offers secure attachment, even for heavy-duty applications, and the variety of 3M Roloc discs available allows changing from one application to the next in seconds. *Sold separately ds: dsc: kts: Roloc Surface Conditioning disc SC-DR, 25 mm, A VFN kpn: 15391 kpn_dash: kpn_clear: 15391 bkpn: 3M - SCOTCH-BRITE 15391 bkpn_clear: 3M - SCOTCH-BRITE 15391 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Abrasive disc | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite abrasive disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 7000021279 sr_ns: 3M-SCOTCH-BRITE7000021279
r: 57111145 p: 8.42 pid: 45434 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 00048011171869 sr: 3M - SCOTCH-BRITE 7100000858 sr_no_br: 7100000858 sr_no_br_cl: 7100000858 sr_cl: 3MSCOTCHBRITE7100000858 sr_dash: 3M sold: 336.8 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 76,2 mm (Disc) attachment TR roloc Bore size Perforated No For material Metal; Plastic Series Scotch-Brite Grit size Medium n: 3M - SCOTCH-BRITE 17186 Roloc EXL Unitised wheel XL-DR, 76 mm x 6 mm, 2A MED - 7100000858 cn: ABRASIVE DISC cn2: ABRASIVE DISC cn_clear: ABRASIVEDISC d: Product description Unique construction allows for effective edge deburring and finishing The hard density offers good edge retention, which maintains consistent shape and cutting power Soft density offers deformability and flexibility for finishing flat or irregular surfaces without damaging the workpiece Open-web construction with uniform grain distribution and consistent cutting force 3M Roloc fastening system offers quick and easy disc changes Scotch-Brite Roloc Unitised Disc XL-DR is strong and effective for deburring and finishing. Our wheel performs well on a variety of metals in different applications where close tolerances are important. Scotch-Brite Roloc EXL unitised wheels perform well on a variety of metalworking applications and on milled parts with tight tolerances. Use our wheels for professional results when polishing welds, deburring aircraft parts or blending and finishing various metals, plastics and composites. The wheels are available in different coarsenesses, from fine to medium and coarse. They are made of high-density EXL material. This provides a hard structure and aggressive cutting power, making them great for deburring edges and corners without damaging the part. Lower-density versions are soft and deformable, making them suitable for finishing curved surfaces. Discs with the Roloc quick-change system can be quickly and easily attached to a Roloc disc pad*. This allows you to easily switch between different tasks or steps in a finishing process. The Roloc system provides a secure attachment even in heavy-duty applications, and the wide range of 3M Roloc discs allows the user to change discs - and applications - in seconds. The discs allow you to use both the edge and surface of the wheel without the fastening mechanism getting in the way. Scotch-Brite's surface finishing products consist of an abrasive material in non-woven nylon or synthetic fibres. Combining abrasive minerals with fibres creates an abrasive system that delivers consistent results throughout the life of the product. The open web structure of the material ensures a lower operating temperature and less risk of discolouration and deformation of parts. The fibres do not fill up easily and ensure the powerful performance of the mineral abrasive by preventing fibre flooding. This also extends the life of the disc. Suggested applications For a wide range of metalworking applications For polishing welds, deburring aircraft parts or blending and finishing various metals, plastics and composites ds: dsc: kts: Roloc EXL Unitised wheel XL-DR, 76 mm x 6 mm, 2A MED kpn: 17186 kpn_dash: kpn_clear: 17186 bkpn: 3M - SCOTCH-BRITE 17186 bkpn_clear: 3M - SCOTCH-BRITE 17186 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Abrasive disc | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite abrasive disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 7100000858 sr_ns: 3M-SCOTCH-BRITE7100000858
r: 57110491 p: 10.94 pid: 41305 b: 3M - SCOTCH-BRITE q: 0 st: lt: 5 ean: 53134375451777 sr: 3M - SCOTCH-BRITE 7100093990 sr_no_br: 7100093990 sr_no_br_cl: 7100093990 sr_cl: 3MSCOTCHBRITE7100093990 sr_dash: 3M sold: 328.2 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 115 mm (Disc) attachment Bore hole Bore size 22,2 mm Perforated No For material Varnish Series Scotch-Brite Grit size Extra coarse n: 3M - SCOTCH-BRITE 61172 Clean & Strip disc CG-DB, 115 mm x 22 mm, S XCRS - 7100093990 cn: ABRASIVE DISC cn2: ABRASIVE DISC cn_clear: ABRASIVEDISC d: Product description Easily get into tight corners for complete cleaning, removal of old paint layers and surface preparation Cover a larger area than with wire brushes Uses extra coarse silicon carbide for aggressive cutting and a finer finish than with wire brushes Full run and heat resistance ensures extra-long operation and consistent finish results over the life of the disc Lubricant-resistant non-woven material allows the disc to wear evenly throughout its life The Scotch-Brite Clean and Strip Disc is specially designed to effectively smooth away weld seams and remove rust and old layers of paint. Our extra coarse discs with an open web offer a smooth-running full wheel that is ideal for removing soft coatings. For a superior finish, use Scotch-Brite Clean and Strip disc. Our non-woven discs offer a safe alternative to wire brushes to effectively eliminate welds and remove rust and old paint layers. They cover a wider area and deliver finer results that may eliminate the need for subsequent finishing steps. Scotch-Brite Clean and Strip discs use a sharp, synthetic, extra coarse silicon carbide abrasive grain, typically used in low-pressure applications such as paint preparation. It breaks down faster than aluminium oxide, for a superior finish. Our Scotch-Brite industrial abrasives are unique surface conditioning products. We combine them with non-woven nylon or other synthetic fibres to create a system that delivers consistent results throughout the product life. The discs are perfect for removing soft coatings. The open material, together with the aggressive abrasive mineral, gives a smooth-running wheel that is full-flow resistant. Because the fibres do not clog so easily, the abrasive minerals maintain their high cutting performance. Suggested applications Work away welds and remove rust and old paint layers in all kinds of applications ds: dsc: kts: Clean & Strip disc CG-DB, 115 mm x 22 mm, S XCRS kpn: 61172 kpn_dash: kpn_clear: 61172 bkpn: 3M - SCOTCH-BRITE 61172 bkpn_clear: 3M - SCOTCH-BRITE 61172 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Abrasive disc | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite abrasive disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 7100093990 sr_ns: 3M-SCOTCH-BRITE7100093990
r: 57110489 p: 9.57 pid: 41046 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 53134375451753 sr: 3M - SCOTCH-BRITE 7100093978 sr_no_br: 7100093978 sr_no_br_cl: 7100093978 sr_cl: 3MSCOTCHBRITE7100093978 sr_dash: 3M sold: 287.1 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 100 mm Thickness 13 mm (Disc) attachment TR roloc Bore size Perforated No For material Varnish Series Scotch-Brite Grit size Extra coarse n: 3M - SCOTCH-BRITE 57018 Roloc+ Clean & Strip disc CG-ZR, blue, 100 mm x 13 mm, S XCRS - 7100093978 cn: ABRASIVE DISC cn2: ABRASIVE DISC cn_clear: ABRASIVEDISC d: Product description Removes flat and rust quickly without affecting workpiece geometry Material that resists flooding avoids clogging for consistent cutting action Resistant to streaking to minimise work surface cleaning Extra coarse silicon carbide (XCS) provides aggressive cutting action and leaves a fine finish without grooves in the workpiece The Roloc attachment system allows quick and easy disc changes in multi-step finishing processes The Scotch-Brite Roloc Clean and Strip disc uses a long-life abrasive material that combines silicon carbide with non-woven nylon fibres through a synthetic resin that dissolves and degrades over time. Our discs are designed for aggressive cleaning without changing the base material. Use the Scotch-Brite Roloc Clean and Strip disc to aggressively remove paint and rust from seams, door jambs, trim and pinch welds and other tight places. Our XT discs feature the Roloc mounting system for quick and easy disc changes: ideal in multi-step finishing processes. The disc is quickly mounted on holder and pad* which is then attached to abrasive tools such as straight grinders and angle grinders. The discs bind silicon carbide mineral and non woven nylon fibres using a resin that dissolves and breaks down over time, keeping the abrasive strong and heat-resistant. Silicon carbide is a very sharp synthetic abrasive generally used in low-pressure applications such as paint preparation. The material breaks down faster than aluminium oxide, for a superior finish. The extra coarse (XCS) mineral works hard to remove unwanted corrosion and imperfections from various substrates. It aggressively removes paint and rust from seams, door jambs, drip rails, pinch welds and other hard-to-reach areas. The non-woven technology makes Scotch-Brite industrial abrasives unique. We combine strands, synthetic resin and abrasive mineral to form a thick, open web. The springy property of the fibres responds to contours and effectively removes unwanted burrs, dirt and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and increases productivity. The abrasive can escape through holes in the web, preventing particles from clogging the mineral. Fibres in the web constantly break down during use so that fresh minerals are exposed. This ensures exceptional consistency, superior cutting performance and extremely long service life. From aesthetic finishing to blending welds, deburring and more: Scotch-Brite abrasives work quickly and deliver consistent results, part after part. *Sold separately ds: dsc: kts: Roloc+ Clean & Strip disc CG-ZR, blue, 100 mm x 13 mm, S XCRS kpn: 57018 kpn_dash: kpn_clear: 57018 bkpn: 3M - SCOTCH-BRITE 57018 bkpn_clear: 3M - SCOTCH-BRITE 57018 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Abrasive disc | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite abrasive disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 7100093978 sr_ns: 3M-SCOTCH-BRITE7100093978
r: 57111133 p: 1.43 pid: 45955 b: 3M - SCOTCH-BRITE q: 0 st: lt: 5 ean: 00048011055275 sr: 3M - SCOTCH-BRITE 7000000751 sr_no_br: 7000000751 sr_no_br_cl: 7000000751 sr_cl: 3MSCOTCHBRITE7000000751 sr_dash: 3M sold: 286 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 50,8 mm (Disc) attachment TR roloc Bore size Perforated No For material Metal Series Scotch-Brite Grit size Medium n: 3M - SCOTCH-BRITE 5527 Surface conditioning disc SC-DR TR, 50 mm, without holes, A MED - 7000000751 cn: ABRASIVE DISC cn2: ABRASIVE DISC cn_clear: ABRASIVEDISC d: Product description Tough non-woven disc that aggressively deburrs and finishes. Flexible, non-woven disc combined with Roloc backing for aggressive grinding. Open-web construction resists crowding and heating for a consistent finish. 3M Roloc attachment system offers quick and easy disc changes The Scotch-Brite Roloc Surface Conditioning Disc SC-DR combines our durable non-woven disc with the efficiency of the 3M Roloc attachment that allows quick disc changes for cleaning, finishing, blending and deburring. Our non-woven fibre construction is excellent for maintaining irregular or contoured surfaces and the Roloc backing supports the disc for aggressive cutting work. Use Scotch Brite Roloc Surface Conditioning Disc for a range of tasks, including blending, deburring and finishing. Our non-woven discs use a fast-cutting alumina mineral and are made of a fibre that adapts well to work irregular or shaped surfaces while maintaining shape. This combined with an efficient 3M Roloc quick-change system to support the disc during tough jobs. The discs' open web ensures little heat build-up and resists clogging, reducing the risk of discolouration and warping of parts. Aluminium oxide abrasives cut quickly and provide a consistent finish. Tough, durable and wear-resistant alumina continuously breaks apart during use to expose new cutting edges. By comparison, traditional abrasives, such as garnet, wear out much faster during use. Due to its high cutting speed, hardness, strength and low heat build-up, alumina mineral is a popular choice for applications in grinding, sanding and finishing. It is suitable for use on a wide range of substrates in both woodworking and metalworking, including ferroalloys. Scotch Brite Surface Conditioning products contain abrasives incorporated into non-woven nylon or synthetic fibres. Combining abrasives with the fibres creates an abrasive system that produces consistent results for the life of the product. The fibres are resistant to clogging and therefore allow abrasive minerals to maintain high performance, which also extends the life of the disc. 3M Roloc TR quick-change discs are smaller discs with a plastic threaded knob or screw that is designed to easily and quickly screw onto a Roloc TR support disc*, making it easy to change discs with a simple twist. The Roloc TR system offers secure attachment, even for heavy-duty applications, and the variety of 3M Roloc discs available allows changing from one application to the next in seconds. *Sold separately ds: dsc: kts: Surface conditioning disc SC-DR TR, 50 mm, without holes, A MED kpn: 5527 kpn_dash: kpn_clear: 5527 bkpn: 3M - SCOTCH-BRITE 5527 bkpn_clear: 3M - SCOTCH-BRITE 5527 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Abrasive disc | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite abrasive disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 7000000751 sr_ns: 3M-SCOTCH-BRITE7000000751
r: 02255170 p: 6.95 pid: 41477 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 04046719011179 sr: 3M - SCOTCH-BRITE 7100233775 sr_no_br: 7100233775 sr_no_br_cl: 7100233775 sr_cl: 3MSCOTCHBRITE7100233775 sr_dash: 3M sold: 278 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 178 mm (Disc) attachment Hook and loop Bore size 22,2 mm Perforated No For material Metal Series Scotch-Brite Grit size Medium n: 3M - SCOTCH-BRITE 60986 Surface conditioning disc SC-DH, 178 mm x 22 mm, A MED - 7100233775 cn: ABRASIVE DISC cn2: ABRASIVE DISC cn_clear: ABRASIVEDISC d: Product description Variation of grooves and sizes provides an excellent starting point for cleaning, finishing, blending and light deburring. The open web material stays cool in use and is full-flow resistant for long-term use. The highly deformable disc conditions surfaces without grooving, eroding or damaging the base material. Suitable for metal, composites, plastic and other materials Velcro attachment system for quick disc replacement in finishing processes with more steps The Scotch-Brite Surface Conditioning Disc is a durable, non-woven disc for the first step in cleaning, blending, deburring and finishing processes. Our discs perform well on contoured and uneven surfaces, without eroding or damaging the base material. Our fast-cutting the Scotch-Brite SL Surface Conditioning Disc is an ideal first step in cleaning, blending, deburring and finishing. The open web material of our discs stays cool in use and is full-body resistant, for long-lasting use. The evenly spaced aluminium oxide abrasive grains offer high speed for consistent finishing. Our surface conditioning discs use aluminium oxide abrasive grit, preferred by industrial professionals for its fast cut and long life. The abrasive grain is strong, durable and breaks down during use to create new cutting edges all the time for a more efficient cut, compared to traditional abrasive grains, such as garnet, which wear out quickly during use. Alumina mineral is strong, tough, has a high cutting speed and retains little heat. It is widely used for polishing, sanding and finishing - on numerous substrates in both wood and metalworking, including ferroalloys. Scotch-Brite Industrial Abrasives are unique surface conditioning products in which abrasive grains are mixed with non-woven nylon or synthetic fibres. This creates an abrasive system that delivers consistent results over the life of the product. The open web material remains cool during use and is full-bodied. This reduces fibre clogging and maintains high performance of the abrasive minerals. Suggested applications Use for fast cutting and as an efficient first step in cleaning, blending, deburring and finishing Suitable for metal, composites, plastic and other materials ds: dsc: kts: Surface conditioning disc SC-DH, 178 mm x 22 mm, A MED kpn: 60986 kpn_dash: kpn_clear: 60986 bkpn: 3M - SCOTCH-BRITE 60986 bkpn_clear: 3M - SCOTCH-BRITE 60986 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Abrasive disc | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite abrasive disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 7100233775 sr_ns: 3M-SCOTCH-BRITE7100233775
r: 57111126 p: 3.77 pid: 44735 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 00048011183640 sr: 3M - SCOTCH-BRITE 7000046010 sr_no_br: 7000046010 sr_no_br_cl: 7000046010 sr_cl: 3MSCOTCHBRITE7000046010 sr_dash: 3M sold: 226.2 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 50,8 mm (Disc) attachment TR roloc Bore size Perforated No For material Varnish Series Scotch-Brite Grit size Extra coarse n: 3M - SCOTCH-BRITE 18364 Roloc Coating Removal Disc, CR-DR, 50 mm, S XCS, 60/box, PN - 7000046010 cn: ABRASIVE DISC cn2: ABRASIVE DISC cn_clear: ABRASIVEDISC d: Product description Removes coatings and prepares surfaces more effectively than steel brushes. Cleans weld skin, discolourations and seams. Non-woven material aggressively removes coating without damaging the base material. Open-web construction resists flooding and heating for a consistent finish. Velcro connection system to quickly change discs in multi-step finishing processes Scotch-Brite Roloc Coating Removal Disc CR-DR features extra coarse silicon carbide abrasive material to effectively remove paint and rust from metal surfaces and welds. Together with the flexible non-woven material, the abrasive removes coatings without grooving, cutting or damaging the base material, especially on hard surfaces. Use the Scotch Brite Roloc Coating Removal Disc to efficiently remove coatings without damaging the base material. Our discs are great for hard surfaces. They are a good alternative to wire brushes, have a larger surface area and are safer as no wires can come loose. Velcro tape ensures a secure attachment of the disc. The open web structure keeps the discs cool and makes them less likely to fill up. The abrasive keeps working better and results remain consistent throughout the life of the disc. Scotch Brite Roloc Discs for removing coatings are equipped with the Roloc TR function to quickly attach and remove the discs. This allows the discs to be quickly changed during multi-step finishing processes. These discs use silicon carbide-based abrasive material, a very sharp synthetic mineral widely used in low-pressure applications such as paint preparation. The material breaks down faster than aluminium oxide, for a superior finish. Scotch Brite industrial abrasives are unique surface treatment products where the abrasive material is embedded in non-woven nylon or other synthetic fibres. The combination of abrasive material in fibres creates an abrasive system that delivers consistent results throughout the life of the product. The open web material is full web resistant and maintains high performance of the abrasive minerals by reducing fibre clogging. Roloc TR Quick Change Discs are smaller discs with a threaded plastic knob or screw for quick and easy attachment to a 3M Roloc TR Backing Disc*. They allow discs to be changed quickly with a simple twist. The Roloc TR system ensures secure attachment even in heavy duty applications. We have an extensive range of Roloc discs, allowing users to switch applications in seconds. *Sold separately ds: dsc: kts: Roloc Coating Removal Disc, CR-DR, 50 mm, S XCS, 60/box, PN kpn: 18364 kpn_dash: kpn_clear: 18364 bkpn: 3M - SCOTCH-BRITE 18364 bkpn_clear: 3M - SCOTCH-BRITE 18364 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Abrasive disc | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite abrasive disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 7000046010 sr_ns: 3M-SCOTCH-BRITE7000046010
r: 57110462 p: 2.77 pid: 43147 b: 3M - SCOTCH-BRITE q: 150 st: 1 lt: 1 ean: 00048011055329 sr: 3M - SCOTCH-BRITE 7000000756 sr_no_br: 7000000756 sr_no_br_cl: 7000000756 sr_cl: 3MSCOTCHBRITE7000000756 sr_dash: 3M sold: 213.29 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 76,2 mm Grit size Coarse (Disc) attachment TR roloc Bore size Perforated No For material Metal Series Scotch-Brite n: 3M - SCOTCH-BRITE 5532 Roloc Surface Conditioning disc SC-DR, 76 mm, A CRS - 7000000756 cn: ABRASIVE DISC cn2: ABRASIVE DISC cn_clear: ABRASIVEDISC d: Product description Tough non-woven disc that aggressively deburrs and finishes. Flexible, non-woven disc combined with Roloc backing for aggressive grinding. Open-web construction resists crowding and heating for a consistent finish. 3M Roloc attachment system offers quick and easy disc changes The Scotch-Brite Roloc Surface Conditioning Disc SC-DR combines our durable non-woven disc with the efficiency of the 3M Roloc attachment that allows quick disc changes for cleaning, finishing, blending and deburring. Our non-woven fibre construction is excellent for maintaining irregular or contoured surfaces and the Roloc backing supports the disc for aggressive cutting work. Use Scotch Brite Roloc Surface Conditioning Disc for a range of tasks, including blending, deburring and finishing. Our non-woven discs use a fast-cutting alumina mineral and are made of a fibre that adapts well to work irregular or shaped surfaces while maintaining shape. This combined with an efficient 3M Roloc quick-change system to support the disc during tough jobs. The discs' open web ensures little heat build-up and resists clogging, reducing the risk of discolouration and warping of parts. Aluminium oxide abrasives cut quickly and provide a consistent finish. Tough, durable and wear-resistant alumina continuously breaks apart during use to expose new cutting edges. By comparison, traditional abrasives, such as garnet, wear out much faster during use. Due to its high cutting speed, hardness, strength and low heat build-up, alumina mineral is a popular choice for applications in grinding, sanding and finishing. It is suitable for use on a wide range of substrates in both woodworking and metalworking, including ferroalloys. Scotch Brite Surface Conditioning products contain abrasives embedded in non-woven nylon or synthetic fibres. Combining abrasives with the fibres creates an abrasive system that produces consistent results for the life of the product. The fibres are resistant to clogging, allowing abrasive minerals to maintain high performance, which also extends the life of the disc. 3M Roloc TR quick-change discs are smaller discs with a plastic threaded knob or screw that is designed to easily and quickly screw onto a Roloc TR support disc*, making it easy to change discs with a simple twist. The Roloc TR system offers secure attachment, even for heavy-duty applications, and the variety of 3M Roloc discs available allows changing from one application to the next in seconds. *Sold separately ds: dsc: kts: Roloc Surface Conditioning disc SC-DR, 76 mm, A CRS kpn: 5532 kpn_dash: kpn_clear: 5532 bkpn: 3M - SCOTCH-BRITE 5532 bkpn_clear: 3M - SCOTCH-BRITE 5532 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Abrasive disc | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite abrasive disc | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 7000000756 sr_ns: 3M-SCOTCH-BRITE7000000756
