_

FISCHER FH II 10/50 H safety anchor with cap nut zinc plated - 503141

• Wire dimension: 6 mm
• Overall length: 115 mm
• Material: Steel

Delivery time average 9 days.

3.16

€2.61 excl. VAT

[SEARCH SCORE
Sold desc:
1, 0, 2.61 ]
query took: 1782867318.1843

layer :



r: 87051348
p: 2.61
pid: 16035
b: FISCHER
q: 0
st:
lt: 8
ean: 4048962016819
sr: FISCHER 503141
sr_no_br: 503141
sr_no_br_cl: 503141
sr_cl: FISCHER503141
sr_dash:
sold: 0
p_range: none
type: standard
act: 1
avo: 1
av: Wire dimension 6 mm Overall length 115 mm Material Steel Surface treatment Zinc plated Safety anchor Yes Drilling diameter 10 mm
n: FISCHER FH II 10/50 H safety anchor with cap nut zinc plated - 503141
cn: ANCHOR SLEEVE
cn2: ANCHOR SLEEVE
cn_clear: ANCHORSLEEVE
d: Product description The through bolt anchor with cover nut and sophisticated design in cracked concrete. The fischer high-performance anchor FH II H with cover nut is a sleeve anchor made of zinc-plated steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorbs the torque slippage. This means that the fixture is pulled towards the anchoring base. The fischer high-performance anchor FH II H with cover nut is ideally suited to fix steel constructions, machines, and gates in cracked and non-cracked concrete. With cover nut The international approvals guarantee maximum safety and maximum performance. Also for applications in earthquake regions (seismic C1 and C2) The ideal combination of screw shank and sleeve enables a high transverse load capacity and fewer fixing points The optimised geometry intelligently reduces the setting energy and thus ensures a force-saving assembly The international approvals guarantee maximum safety and the best performance. The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2) The protruding head for stable and robust fixings The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required The optimised geometry intelligently reduces the energy required for assembly The approval regulates the use of hollow drills Suitable for The FH II is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The black plastic ring prevents rotation when tightening the anchor, and acts as a crumple zone to take the torque slippage so that the fixture is pulled onto the anchor base Available head shapes for flexible design solutions:Countersunk head (type SK), hexagon head (type S), bolt version with nut and washer (type B) and cap nut (type H) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Guard rails Staircases Consoles Steel constructions Ladders Cable trays Machines Gates Façades Gratings
ds:
dsc:
kts: safety anchor with cap nut zinc plated
kpn: FH II 10/50 H
kpn_dash:
kpn_clear: FHII1050H
bkpn: FISCHER FH II 10/50 H
bkpn_clear: FISCHER FHII1050H
c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve
sr_no_br_cl_ns: 503141
sr_ns: FISCHER503141

_

FISCHER 519021 aerated concrete anchor FPX-I M6 electrolytically galvanised steel

Delivery time average 6 days.

3.13

€2.59 excl. VAT

[SEARCH SCORE
Sold desc:
1, 0, 2.59 ]
query took: 1782867318.1843

layer :



r: 02381019
p: 2.59
pid: 176193
b: FISCHER
q: 0
st:
lt: 5
ean: 4048962158359
sr: FISCHER 519021
sr_no_br: 519021
sr_no_br_cl: 519021
sr_cl: FISCHER519021
sr_dash:
sold: 0
p_range: none
type: standard
act: 1
avo: 1
av:
n: FISCHER 519021 aerated concrete anchor FPX-I M6 electrolytically galvanised steel
cn: ANCHOR SLEEVE
cn2: ANCHOR SLEEVE
cn_clear: ANCHORSLEEVE
d: Product description The strong internal thread anchor with unique four-way expansion for fixings in aerated concrete. The fischer Aircrete anchor FPX-I is made of zinc-plated steel. After pre-drilling, the FPX-I is only driven in with the hammer. It is not necessary to clean the drill hole. The fischer Aircrete anchor is applied with a hex driver via a cordless screwdriver or via a ratchet. The cone is then pulled into the expansion sleeve. In this case the four wings create an undercut in the drill hole. After expansion, the hex socket is automatically released. The fischer Aircrete anchor FPX-I is ideally suited for fixing suspended ceilings, railings or kitchen cabinets in aerated concrete. The first approved metal anchor for aerated concrete High load capacity: Expanding wings create undercut. This saves on fixing points Simple and power-saving installation without an additional setting tool No rotation of the anchor Automatic setting control ensures maximum safety The FPX-I enables easy tightening via the hexagon wrench using a cordless screwdriver or ratchet and therefore offers top installation comfort The deformation-controlled expansion of the anchor with the hexagon wrench ensures safe, even and gentle installation The unique 4-way expansion of the FPX-I with a square expansion sleeve prevents the rotation of the anchor in the drill hole and ensures high tension and shear loads, which means fewer fixing points The releasing of the hexagonal wrench guarantees an automatical setting control for each installation process The first steel anchor with an ETA-Approval and fire protection certificate for fixings in aerated concrete enables use for safety-relevant fixings, too Suitable for The FPX-I with internal thread is suitable for pre-positioned installation Pre-drilling enables easy hammering in, even in high-strength aerated concrete. There is no need to clean the drill hole When the anchor is tightened with the hexagon wrench, the internal thread sleeve starts to rotate and the cone is pulled into the square expansion sleeve. The aerated concrete is compressed on the four sides and generates an undercut in the drill hole When reached the optimum expansion, the hexagon wrench is released automatically from the anchor Building materials Approved for: Aerated concrete with compressive strength 2 to 7 N/mm² Aerated concrete wall or ceiling boards with compressive strength 3. 3 to 4. 4 N/mm² Planked aerated concrete masonry, e. g. plastered, tiled, papered etc Application Suspended ceilings Cable trays Pipelines Ventilation ducts Guard rails/hand rails TV consoles Kitchen cupboards Stand-off installations
ds:
dsc:
kts: aerated concrete anchor FPX-I M6 electrolytically galvanised steel
kpn: 519021
kpn_dash:
kpn_clear: 519021
bkpn: FISCHER 519021
bkpn_clear: FISCHER 519021
c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve
sr_no_br_cl_ns: 519021
sr_ns: FISCHER519021

_

FISCHER FH II 10/25 S safety anchor with hexagonal head zinc plated - 503134

• Wire dimension: 10 mm
• Overall length: 85 mm
• Safety anchor: Yes

Delivery time average 9 days.

2.60

€2.15 excl. VAT

[SEARCH SCORE
Sold desc:
1, 0, 2.15 ]
query took: 1782867318.1844

layer :



r: 87051369
p: 2.15
pid: 16310
b: FISCHER
q: 0
st:
lt: 8
ean: 4048962016741
sr: FISCHER 503134
sr_no_br: 503134
sr_no_br_cl: 503134
sr_cl: FISCHER503134
sr_dash:
sold: 0
p_range: none
type: standard
act: 1
avo: 1
av: Wire dimension 10 mm Overall length 85 mm Safety anchor Yes Drilling diameter 10 mm
n: FISCHER FH II 10/25 S safety anchor with hexagonal head zinc plated - 503134
cn: ANCHOR SLEEVE
cn2: ANCHOR SLEEVE
cn_clear: ANCHORSLEEVE
d: Product description The through bolt anchor with sophisticated design in cracked concrete. The fischer high-performance anchor FH II S with hexagonal head is a sleeve anchor made of zinc-plated steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorbs the torque slippage. This means that the fixture is pulled towards the anchoring base. The fischer high-performance anchor FH II S with hexagonal head is ideally suited to fix consoles, steel constructions, and cable trays in cracked and non-cracked concrete. The international approvals guarantee maximum safety and maximum performance. Also for applications in earthquake regions (seismic C1 and C2) The ideal combination of screw shank and sleeve enables a high transverse load capacity and fewer fixing points The optimised geometry intelligently reduces the setting energy and thus ensures a force-saving assembly The international approvals guarantee maximum safety and the best performance. The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2) The low profile of the screw head ensures for a discreet fixing The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required The optimised geometry intelligently reduces the energy required for assembly The approval regulates the use of hollow drills Suitable for The FH II is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The black plastic ring prevents rotation when tightening the anchor, and acts as a crumple zone to take the torque slippage so that the fixture is pulled onto the anchor base Available head shapes for flexible design solutions:Countersunk head (type SK), hexagon head (type S), bolt version with nut and washer (type B) and cap nut (type H) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Guard rails Staircases Consoles Steel constructions Ladders Cable trays Machines Gates Façades Gratings
ds:
dsc:
kts: safety anchor with hexagonal head zinc plated
kpn: FH II 10/25 S
kpn_dash:
kpn_clear: FHII1025S
bkpn: FISCHER FH II 10/25 S
bkpn_clear: FISCHER FHII1025S
c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve
sr_no_br_cl_ns: 503134
sr_ns: FISCHER503134

_

FISCHER FH II 10/10 H safety anchor with cap nut zinc plated - 503139

• Wire dimension: 6 mm
• Overall length: 75 mm
• Material: Steel

Delivery time average 9 days.

2.59

€2.14 excl. VAT

[SEARCH SCORE
Sold desc:
1, 0, 2.14 ]
query took: 1782867318.1845

layer :



r: 87051346
p: 2.14
pid: 17135
b: FISCHER
q: 0
st:
lt: 8
ean: 4048962016796
sr: FISCHER 503139
sr_no_br: 503139
sr_no_br_cl: 503139
sr_cl: FISCHER503139
sr_dash:
sold: 0
p_range: none
type: standard
act: 1
avo: 1
av: Wire dimension 6 mm Overall length 75 mm Material Steel Surface treatment Zinc plated Safety anchor Yes Drilling diameter 10 mm
n: FISCHER FH II 10/10 H safety anchor with cap nut zinc plated - 503139
cn: ANCHOR SLEEVE
cn2: ANCHOR SLEEVE
cn_clear: ANCHORSLEEVE
d: Product description The through bolt anchor with cover nut and sophisticated design in cracked concrete. The fischer high-performance anchor FH II H with cover nut is a sleeve anchor made of zinc-plated steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorbs the torque slippage. This means that the fixture is pulled towards the anchoring base. The fischer high-performance anchor FH II H with cover nut is ideally suited to fix steel constructions, machines, and gates in cracked and non-cracked concrete. With cover nut The international approvals guarantee maximum safety and maximum performance. Also for applications in earthquake regions (seismic C1 and C2) The ideal combination of screw shank and sleeve enables a high transverse load capacity and fewer fixing points The optimised geometry intelligently reduces the setting energy and thus ensures a force-saving assembly The international approvals guarantee maximum safety and the best performance. The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2) The protruding head for stable and robust fixings The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required The optimised geometry intelligently reduces the energy required for assembly The approval regulates the use of hollow drills Suitable for The FH II is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The black plastic ring prevents rotation when tightening the anchor, and acts as a crumple zone to take the torque slippage so that the fixture is pulled onto the anchor base Available head shapes for flexible design solutions:Countersunk head (type SK), hexagon head (type S), bolt version with nut and washer (type B) and cap nut (type H) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Guard rails Staircases Consoles Steel constructions Ladders Cable trays Machines Gates Façades Gratings
ds:
dsc:
kts: safety anchor with cap nut zinc plated
kpn: FH II 10/10 H
kpn_dash:
kpn_clear: FHII1010H
bkpn: FISCHER FH II 10/10 H
bkpn_clear: FISCHER FHII1010H
c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve
sr_no_br_cl_ns: 503139
sr_ns: FISCHER503139

_

FISCHER EA M20 N impact anchor - 90164

Delivery time average 9 days.

2.52

€2.08 excl. VAT

[SEARCH SCORE
Sold desc:
1, 0, 2.08 ]
query took: 1782867318.1845

layer :



r: 02019633
p: 2.08
pid: 10632
b: FISCHER
q: 0
st:
lt: 8
ean: 4006209901649
sr: FISCHER 90164
sr_no_br: 90164
sr_no_br_cl: 90164
sr_cl: FISCHER90164
sr_dash:
sold: 0
p_range: none
type: standard
act: 1
avo: 1
av:
n: FISCHER EA M20 N impact anchor - 90164
cn: ANCHOR SLEEVE
cn2: ANCHOR SLEEVE
cn_clear: ANCHORSLEEVE
d: Product description The cost-effective hammerset anchor without approval for multiple fixings in non-structural systems The fischer hammerset anchor EA N is an internal thread anchor made from zinc-plated and stainless steel. The hammerset anchor is ideal for the multiple fixation of non-structural systems that do not require approved anchorage. The assembly of the internal thread anchor is extremely cost-effective thanks to the low embedment depth, fast hammerset installation, and direction-controlled screwing process. The EA N is mounted with the hammer flush to the base material. With the setting tool EA-ST, the sleeve is expanded and braced against the drill hole wall through the driving in of the internal pin. No torque should be applied to the screw to enable correct expansion. Simple hammerset installation The metric internal thread allows for the use of standard screws or threaded rods for ideal adaptation in line with the intended use The hand setting tool EA-ST facilitates fast installation Simple hammerset installation The metric internal thread allows for the use of standard screws or threaded rods for ideal adaptation in line with the intended use The hand setting tool EA-ST facilitates fast installation Suitable for The EA N is suitable for pre-positioned installation Position the hammerset anchor in the drill hole and drive in flush to the surface of the base material using the hammer The setting tool EA-ST is then used to expand the sleeve against the drill hole wall by driving in the internal pin The setting tools must sit on the edge of the anchor to ensure correct expansion Building materials Concrete C12/15, non-cracked Concrete C20/25, non-cracked Application Pipelines Cable trays Consoles
ds:
dsc:
kts: impact anchor
kpn: EA M20 N
kpn_dash:
kpn_clear: EAM20N
bkpn: FISCHER EA M20 N
bkpn_clear: FISCHER EAM20N
c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve
sr_no_br_cl_ns: 90164
sr_ns: FISCHER90164

_

FISCHER FH II 10/10 S safety anchor with hexagonal head zinc plated - 503133

• Wire dimension: 10 mm
• Overall length: 70 mm
• Safety anchor: Yes

Delivery time average 9 days.

2.36

€1.95 excl. VAT

[SEARCH SCORE
Sold desc:
1, 0, 1.95 ]
query took: 1782867318.1845

layer :



r: 87051368
p: 1.95
pid: 16306
b: FISCHER
q: 0
st:
lt: 8
ean: 4048962016734
sr: FISCHER 503133
sr_no_br: 503133
sr_no_br_cl: 503133
sr_cl: FISCHER503133
sr_dash:
sold: 0
p_range: none
type: standard
act: 1
avo: 1
av: Wire dimension 10 mm Overall length 70 mm Safety anchor Yes Drilling diameter 10 mm
n: FISCHER FH II 10/10 S safety anchor with hexagonal head zinc plated - 503133
cn: ANCHOR SLEEVE
cn2: ANCHOR SLEEVE
cn_clear: ANCHORSLEEVE
d: Product description The through bolt anchor with sophisticated design in cracked concrete. The fischer high-performance anchor FH II S with hexagonal head is a sleeve anchor made of zinc-plated steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorbs the torque slippage. This means that the fixture is pulled towards the anchoring base. The fischer high-performance anchor FH II S with hexagonal head is ideally suited to fix consoles, steel constructions, and cable trays in cracked and non-cracked concrete. The international approvals guarantee maximum safety and maximum performance. Also for applications in earthquake regions (seismic C1 and C2) The ideal combination of screw shank and sleeve enables a high transverse load capacity and fewer fixing points The optimised geometry intelligently reduces the setting energy and thus ensures a force-saving assembly The international approvals guarantee maximum safety and the best performance. The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2) The low profile of the screw head ensures for a discreet fixing The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required The optimised geometry intelligently reduces the energy required for assembly The approval regulates the use of hollow drills Suitable for The FH II is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The black plastic ring prevents rotation when tightening the anchor, and acts as a crumple zone to take the torque slippage so that the fixture is pulled onto the anchor base Available head shapes for flexible design solutions:Countersunk head (type SK), hexagon head (type S), bolt version with nut and washer (type B) and cap nut (type H) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Guard rails Staircases Consoles Steel constructions Ladders Cable trays Machines Gates Façades Gratings
ds:
dsc:
kts: safety anchor with hexagonal head zinc plated
kpn: FH II 10/10 S
kpn_dash:
kpn_clear: FHII1010S
bkpn: FISCHER FH II 10/10 S
bkpn_clear: FISCHER FHII1010S
c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve
sr_no_br_cl_ns: 503133
sr_ns: FISCHER503133

_

SPIT 050405 PRIMA l spread anchor M6x12/25 zinc-plated (with bolt and washer)

• Wire dimension: 6 mm
• Overall length: 70 mm
• Material: Steel

On stock, immediately available.

2.31

€1.91 excl. VAT

[SEARCH SCORE
Sold desc:
1, 0, 1.91 ]
query took: 1782867318.1846

layer :



r: 02345651
p: 1.91
pid: 20591
b: SPIT
q: 475
st: 1
lt: 1
ean: 3439510504055
sr: SPIT 050405
sr_no_br: 050405
sr_no_br_cl: 050405
sr_cl: SPIT050405
sr_dash:
sold: 0
p_range: none
type: standard
act: 1
avo: 1
av: Wire dimension 6 mm Overall length 70 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 12 mm
n: SPIT 050405 PRIMA l spread anchor M6x12/25 zinc-plated (with bolt and washer)
cn: ANCHOR SLEEVE
cn2: ANCHOR SLEEVE
cn_clear: ANCHORSLEEVE
d: Product description Metal mechanical anchor with large spread Universal demountable metal spread anchor Applications Fastening of industrial doors, roller tracks, facades, fall protection, window cleaning systems
ds:
dsc:
kts: PRIMA l spread anchor M6x12/25 zinc-plated (with bolt and washer)
kpn: 050405
kpn_dash:
kpn_clear: 050405
bkpn: SPIT 050405
bkpn_clear: SPIT 050405
c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit anchoring / Spit anchor sleeve
sr_no_br_cl_ns: 050405
sr_ns: SPIT050405

_

FISCHER 94430 Channel anchor TA M8x75 EN electrolytically galvanised

• Wire dimension: 8 mm
• Drilling diameter: 12 mm
• Overall length: 75 mm

Delivery time average 9 days.

2.04

€1.69 excl. VAT

[SEARCH SCORE
Sold desc:
1, 0, 1.69 ]
query took: 1782867318.1846

layer :



r: 02873435
p: 1.69
pid: 175996
b: FISCHER
q: 0
st:
lt: 8
ean: 8001132944301
sr: FISCHER 94430
sr_no_br: 94430
sr_no_br_cl: 94430
sr_cl: FISCHER94430
sr_dash:
sold: 0
p_range: none
type: standard
act: 1
avo: 1
av: Wire dimension 8 mm Drilling diameter 12 mm Overall length 75 mm Material Steel Surface treatment Zinc plated Safety anchor No
n: FISCHER 94430 Channel anchor TA M8x75 EN electrolytically galvanised
cn: ANCHOR SLEEVE
cn2: ANCHOR SLEEVE
cn_clear: ANCHORSLEEVE
d: Product description Anchor for temporary fixing in hollow core concrete slabs without approval The fischer Hose anchor TA M NL is a sleeve anchor with female thread suitable for temporary fixing in hollow-core concrete slab floors. The optimized anchor geometry minimizes the energy required for installation. During assembly, the cone is pulled into the expansion sleeve, which then spreads into the wall of the channel. The triple spreading sleeve guarantees the even distribution of the load. After disassembly, no protruding parts remain in the drillhole, thus preventing the risk of accidents. Easy assembly due to small efforts during application Very suitable for temporary anchoring of struts in hollow-core slab floors No protruding parts after disassembly The fischer Hose anchor TA M-NL is suitable for use in hollow-core concrete slab elements with a thickness of >= 40 mm. The fischer Hulsanker TA M-NL is multifunctional and suitable for push-through installation. In addition, the anchor is detachable (sleeve stays behind in the channel plate). The anchor is available as standard in electrolytically galvanized steel Suitable for The TAM NL is suitable for push-through installation During tightening, the cone is pulled into the sleeve, so that it is clamped against the borehole wall The drilling process is decisive for the strength of the fastening. It is essential that the thickness of the shell is not further reduced by the concrete at the rear of the borehole. We first recommend to pre-drill 10 mm with a drill diameter and then drill with the specified drill diameter Building materials Suitable for: Concrete C12/15 Natural stone with dense structure Hollow core concrete slabs For fixing of: Temporary fixings like bracings Application Temporary fixings of braces in hollow core concrete slabs
ds:
dsc:
kts: Channel anchor TA M8x75 EN electrolytically galvanised
kpn: 94430
kpn_dash:
kpn_clear: 94430
bkpn: FISCHER 94430
bkpn_clear: FISCHER 94430
c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve
sr_no_br_cl_ns: 94430
sr_ns: FISCHER94430

_

FISCHER TA M6 T/25 S sleeve anchor push-through assembly zinc plated - 90267

• Wire dimension: 6 mm
• Overall length: 80 mm
• Material: Steel

Delivery time average 9 days.

1.94

€1.60 excl. VAT

[SEARCH SCORE
Sold desc:
1, 0, 1.6 ]
query took: 1782867318.1846

layer :



r: 02019266
p: 1.6
pid: 10863
b: FISCHER
q: 0
st:
lt: 8
ean: 4006209902677
sr: FISCHER 90267
sr_no_br: 90267
sr_no_br_cl: 90267
sr_cl: FISCHER90267
sr_dash:
sold: 0
p_range: none
type: standard
act: 1
avo: 1
av: Wire dimension 6 mm Overall length 80 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 10 mm
n: FISCHER TA M6 T/25 S sleeve anchor push-through assembly zinc plated - 90267
cn: ANCHOR SLEEVE
cn2: ANCHOR SLEEVE
cn_clear: ANCHORSLEEVE
d: Product description The installation-friendly push-through anchor for fixings in non-cracked concrete. The fischer heavy-duty anchor TA M-T is a push-through anchor for time-saving through-type installation made of zinc-plated steel. During installation the cone is pulled into the expansion sleeve and expands it against the hole wall. The heavy-duty anchor is ideal for fixing consoles, ladders, and steel constructions in non-cracked concrete. Simple assembly due to low setting energy Low axial and edge distances due to uniform load introduction ETA approval for non-cracked concrete The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M-T is extremely flexible The detachable screw connection allows for surface flush removal Suitable for The TA M-T is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Handrails Consoles Ladders Cable trays Machines Staircases Gates Façades
ds:
dsc:
kts: sleeve anchor push-through assembly zinc plated
kpn: TA M6 T/25 S
kpn_dash:
kpn_clear: TAM6T25S
bkpn: FISCHER TA M6 T/25 S
bkpn_clear: FISCHER TAM6T25S
c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve
sr_no_br_cl_ns: 90267
sr_ns: FISCHER90267

_

FISCHER 78414 aerated concrete anchor FTP K 10 nylon

Delivery time average 8 days.

1.45

€1.20 excl. VAT

[SEARCH SCORE
Sold desc:
1, 0, 1.2 ]
query took: 1782867318.1846

layer :



r: 87981255
p: 1.2
pid: 176411
b: FISCHER
q: 0
st:
lt: 7
ean: 4006209784143
sr: FISCHER 78414
sr_no_br: 78414
sr_no_br_cl: 78414
sr_cl: FISCHER78414
sr_dash:
sold: 0
p_range: none
type: standard
act: 1
avo: 1
av:
n: FISCHER 78414 aerated concrete anchor FTP K 10 nylon
cn: ANCHOR SLEEVE
cn2: ANCHOR SLEEVE
cn_clear: ANCHORSLEEVE
d: Product description The versatile plastic anchor for aerated concrete. The fischer turbo Aircrete anchor FTP K is a special fixing for fixings in Aircrete. The anchor is made out of high-quality nylon and is set in the pre-positioned installation with the setting tool FTP EK after pre-drilling. The spiral external thread cuts a mechanical interlock in the building material. The fischer turbo Aircrete anchor FTP K is ideally suited to securely fix pictures, lights, cable and pipe clamps to aerated concrete. For wood screws and metric screws High retention forces due to interlocking in building materials Convenient assembly: reduced wear and tear due to the setting tool Low axial and edge distances due to expansion pressure-free anchoring The FTP K is suitable for both wood screws and metric screws, and thus offers flexibility in screw choice The spiral-shaped outer thread taps itself into the soft aerated concrete with a positive fit, thus ensuring a secure hold Setting with the FTP EK setting tool requires only a small amount of force. For a convenient installation The special geometry allows for an almost expansion-force-free anchoring. This allows for small edge and spacing distances, and avoids splitting in the case of plastered surfaces Suitable for The FTP K is suitable for pre-positioned installation Set the FTP K with setting tool FTP EK. The aircrete anchor taps itself into the aerated concrete with a positive fit during the installation process Suitable for wood and metric screws with diameter 4 to 10 mm Building materials Aerated concrete Solid panel made from gypsum Application Pictures Lighting Shelves Mirror cabinets Letter boxes Signs Motion detectors Cable and pipe clips Stand-off installations
ds:
dsc:
kts: aerated concrete anchor FTP K 10 nylon
kpn: 78414
kpn_dash:
kpn_clear: 78414
bkpn: FISCHER 78414
bkpn_clear: FISCHER 78414
c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve
sr_no_br_cl_ns: 78414
sr_ns: FISCHER78414