r: 08123633 p: 20 pid: 166845 b: HG q: 0 st: lt: 8 ean: 8711577189433 sr: HG 110200103 sr_no_br: 110200103 sr_no_br_cl: 110200103 sr_cl: HG110200103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 2 l Packaging Jerrycan Physical state Liquid n: HG 110200103 tile protector 2000 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Gives silk gloss HG tile protector is an easy-to-apply, liquid polymer emulsion for all types of floor tiles, flagstones and slate. After drying, this emulsion forms a shiny and wafer-thin, but extremely strong protective film, protecting the tile against stains, soiling, scratches and wear, while also deepening its colour and structure. This protective film also provides an anti-slip effect. Instructions for use The substrate must be completely clean, grease- and dust-free The glue/soil and joints of new floors must be fully cured and dry This usually requires 4-6 weeks drying time Existing, still porous floors must be completely dry after cleaning Floor heating must be switched off for at least 12 hours before treatment with this product Porous floors must first be treated with HG tile impregnating protector (product 13) Do not shake before use and preferably apply with a wax dispenser (see illustration on front of bottle) If desired, a clean, lint-free (tea) cloth wrapped around a squeegee can also be used On a coarse surface, use a paint roller (fur roller) Pour the liquid onto the floor and spread in straight lines in one direction Do not twist or rub When the product has dried (after about 40 minutes), a second coat can be applied at right angles to the first coat Approximately 3 hours after the last treatment the floor can be walked on normally and is fully cured after 3 days Consumption: 80 m² per 2 litres per coat ds: dsc: kts: tile protector 2000 ml kpn: 110200103 kpn_dash: kpn_clear: 110200103 bkpn: HG 110200103 bkpn_clear: HG 110200103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Coating sr_no_br_cl_ns: 110200103 sr_ns: HG110200103
r: 08123629 p: 19.669 pid: 166856 b: HG q: 0 st: lt: 8 ean: 8711577190606 sr: HG 391100103 sr_no_br: 391100103 sr_no_br_cl: 391100103 sr_cl: HG391100103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 1 l EUH-statements EUH208 ADR packing group ADR class UN number Packaging Bottle Conseils de prudence (P) P101; P102 Physical state Liquid n: HG 391100103 tile protector impregnating 1 l cn: COATING cn2: COATING cn_clear: COATING d: Product description Protects against dirt and (grease) stains HG tile impregnating protector (product 13) is a special basic treatment for (new) unglazed tiles and flagstones. This unique product stops tiles absorbing and prevents the penetration of dirt and (grease) stains, without affecting the original character of the tile or sealing the floor. It contains no silicones, dries quickly and is suitable for all types of porous and low-porosity tiles and flagstones. The product can be used both indoors and outdoors. Depending on the material, 1 litre is good for up to 40 m² of floor space. Instructions for use The surface must be completely clean, free of grease and dust For any necessary treatments: see the HG tile floors treatment matrix on the side of this bottle The adhesive/specimen and joints of new floors must be fully cured and dry This usually requires a drying time of 4-6 weeks Existing floors must be thoroughly dry after cleaning, allow at least 3 days for this to happen However, highly porous tiles, such as terracotta, need more time to completely lose water For these types of tiles, we recommend at least 1 week However, if the floor has underfloor heating switched on, a drying time of 24 hours is sufficient The underfloor heating must be switched off for at least 12 hours before treating with this product Apply the liquid undiluted, preferably using a paint roller, evenly and in one direction If, 10 minutes after application, there is still some product on the tiles, which has not been absorbed, it should be removed immediately with a dry and lint-free cloth For very porous tiles, a 2nd treatment is recommended. A second coat can be applied about 1 hour after the first treatment Approximately 3 hours after the last treatment the floor can be walked on normally again and 12 hours after the last treatment the floor is fully protected Consumption: Highly porous tiles 10-20 m2 per treatment Low-porous tiles: 20-40 m2 per treatment ds: dsc: kts: tile protector impregnating 1 l kpn: 391100103 kpn_dash: kpn_clear: 391100103 bkpn: HG 391100103 bkpn_clear: HG 391100103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating sr_no_br_cl_ns: 391100103 sr_ns: HG391100103
r: 03344397 p: 19.669 pid: 175387 b: RUST-OLEUM q: 0 st: lt: 8 ean: 8715743020391 sr: RUST-OLEUM 3490 sr_no_br: 3490 sr_no_br_cl: 3490 sr_cl: RUSTOLEUM3490 sr_dash: RUST sold: 0 p_range: none type: standard act: 1 avo: 1 av: Suitable substrate Bitumen; Concrete; Metal; Old paint layer; Plastic H-statements H222; H229; H335; H336; H411 ADR packing group ADR class 2 Application method Aerosol can Principal hazard property GHS02 Flammable EUH-statements EUH066; EUH211 Conseils de prudence (P) P101; P102; P103; P210; P211; P251; P271; P273; P391; P410 + P412; P501 UN number UN1950 Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS09 Environmental hazard Flash point -70 °C Packaging Spray can Weight 0,522 kg Product line Leakseal Net volume 500 ml Use environment Indoor and outdoor use Physical state Aerosol n: RUST-OLEUM 3490 Leakseal coating white 500ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Waterproof, semi-glossy appearance Can be finished with a latex or alkyd topcoat Can be used on aluminium and other metals, PVC, concrete, masonry, asphalt roof materials, etc. Easy to use An easy-to-use rubberised protective coating developed for filling and sealing leaks and cracks. ds: dsc: kts: Leakseal coating white 500ml kpn: 3490 kpn_dash: kpn_clear: 3490 bkpn: RUST-OLEUM 3490 bkpn_clear: RUST-OLEUM 3490 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Rust-oleum / Rust-oleum technical and chemical products / Rust-oleum surface treatment and repair / Rust-oleum other surface treatment / Rust-oleum coating sr_no_br_cl_ns: 3490 sr_ns: RUST-OLEUM3490
r: 03344395 p: 19.504 pid: 175375 b: RUST-OLEUM q: 0 st: lt: 8 ean: 8715743020414 sr: RUST-OLEUM 3410 sr_no_br: 3410 sr_no_br_cl: 3410 sr_cl: RUSTOLEUM3410 sr_dash: RUST sold: 0 p_range: none type: standard act: 1 avo: 1 av: Suitable substrate Bitumen; Concrete; Metal; Old paint layer; Plastic H-statements H222; H229; H315; H317; H319; H335; H373; H412 ADR packing group ADR class 2 Application method Aerosol can Principal hazard property GHS02 Flammable Conseils de prudence (P) P101; P102; P103; P210; P211; P251; P260; P271; P280; P410 + P412; P501 UN number UN1950 Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS08 Health hazard Flash point -70 °C Packaging Spray can Weight 0,522 kg Product line Leakseal Net volume 500 ml Use environment Indoor and outdoor use Physical state Aerosol n: RUST-OLEUM 3410 Leakseal coating transparent 500ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Waterproof, semi-glossy appearance Can be finished with a latex or alkyd topcoat Can be used on aluminium and other metals, PVC, concrete, masonry, asphalt roof materials, etc. Easy to use An easy-to-use rubberised protective coating developed for filling and sealing leaks and cracks. ds: dsc: kts: Leakseal coating transparent 500ml kpn: 3410 kpn_dash: kpn_clear: 3410 bkpn: RUST-OLEUM 3410 bkpn_clear: RUST-OLEUM 3410 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Rust-oleum / Rust-oleum technical and chemical products / Rust-oleum surface treatment and repair / Rust-oleum other surface treatment / Rust-oleum coating sr_no_br_cl_ns: 3410 sr_ns: RUST-OLEUM3410
r: 03344396 p: 19.504 pid: 175384 b: RUST-OLEUM q: 0 st: lt: 8 ean: 8715743020407 sr: RUST-OLEUM 3415 sr_no_br: 3415 sr_no_br_cl: 3415 sr_cl: RUSTOLEUM3415 sr_dash: RUST sold: 0 p_range: none type: standard act: 1 avo: 1 av: Suitable substrate Bitumen; Concrete; Metal; Old paint layer; Plastic H-statements H222; H229; H315; H319; H335; H373 ADR packing group ADR class 2 Application method Aerosol can Principal hazard property GHS02 Flammable Conseils de prudence (P) P101; P102; P103; P210; P211; P251; P260; P271; P280; P410 + P412; P501 UN number UN1950 Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS08 Health hazard Flash point -70 °C Packaging Spray can Weight 0,522 kg Net volume 500 ml Use environment Indoor and outdoor use Physical state Aerosol n: RUST-OLEUM 3415 Leakseal coating aluminium 500ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Waterproof, semi-glossy appearance Can be finished with a latex or alkyd topcoat Can be used on aluminium and other metals, PVC, concrete, masonry, asphalt roof materials, etc. Easy to use An easy-to-use rubberised protective coating developed for filling and sealing leaks and cracks. ds: dsc: kts: Leakseal coating aluminium 500ml kpn: 3415 kpn_dash: kpn_clear: 3415 bkpn: RUST-OLEUM 3415 bkpn_clear: RUST-OLEUM 3415 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Rust-oleum / Rust-oleum technical and chemical products / Rust-oleum surface treatment and repair / Rust-oleum other surface treatment / Rust-oleum coating sr_no_br_cl_ns: 3415 sr_ns: RUST-OLEUM3415
r: 12030270 p: 18.842 pid: 104334 b: 3M - SCOTCH q: 0 st: lt: 8 ean: 04001895305856 sr: 3M - SCOTCH 7100037106 sr_no_br: 7100037106 sr_no_br_cl: 7100037106 sr_cl: 3MSCOTCH7100037106 sr_dash: 3M sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 400 ml EUH-statements EUH066 ADR packing group UN number UN1950 Principal hazard property GHS02 Flammable ADR class 2.1 Conseils de prudence (P) P210; P211; P251; P410 + P412 H-statements H222; H229; H319; H336 Hazard class GHS02 Flammable; GHS07 Harmful or irritant Physical state Aerosol Flash point <= 21 °C n: 3M - SCOTCH 1603 insulation varnish black (400 ml spray) - 7100037106 cn: COATING cn2: COATING cn_clear: COATING d: Product description Protective coating for electrical connections, switches, switchgear, terminal blocks, electronic components, printed circuit boards, coils and windings Excellent adhesion to a variety of surfaces, such as metal, glass, plastic, wood, etc. High dielectric strength UV-resistant Available in 400ml aerosol can Scotch® 160x is an insulating and protective varnish based on alkyd resin. When the lacquer dries, it forms a flexible and protective film with excellent adhesion to most surfaces, such as metal, glass, plastic and wood. Scotch® 160x is an alkyd resin-based insulating and protective lacquer. When the lacquer dries, it forms a flexible and protective layer with excellent adhesion to most surfaces, such as metal, glass, plastic and wood. The moisture-resistant lacquer is resistant to UV radiation, acids, oil, alkali and various weathering agents, and has high dielectric strength. Available in transparent, red, black and grey ds: dsc: kts: insulation varnish black (400 ml spray) kpn: 1603 kpn_dash: kpn_clear: 1603 bkpn: 3M - SCOTCH 1603 bkpn_clear: 3M - SCOTCH 1603 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / 3m - scotch / 3m - scotch technical and chemical products / 3m - scotch surface treatment and repair / 3m - scotch other surface treatment / 3m - scotch coating | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Coating sr_no_br_cl_ns: 7100037106 sr_ns: 3M-SCOTCH7100037106
r: 02750290 p: 18.016 pid: 157310 b: CRC q: 0 st: lt: 8 ean: 5412386062810 sr: CRC 2010100_SP250 sr_no_br: 2010100_SP250 sr_no_br_cl: 2010100_SP250 sr_cl: CRC2010100_SP250 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 250 ml ADR packing group ADR class 2.1 Principal hazard property GHS02 Flammable UN number UN1950 Conseils de prudence (P) P102; P210; P211; P251; P260; P280; P314; P410 + P412; P501 H-statements H222; H222 + H229; H229; H304; H315; H336; H373; H412 Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS08 Health hazard Physical state Aerosol Flash point -35 °C Packaging Spray n: CRC Urethane Isolation electro protector 250 ml transparent - 2010100_SP250 cn: COATING cn2: COATING cn_clear: COATING d: Product description: Urethane-based protective varnish for electronic components. Clear transparent or red-coloured one-component urethane coating. Water and moisture repellent, forms a protective film against dirt. The coating dries quickly and adheres well to most surfaces. After curing, the urethane coating forms a very flexible and durable film that resists wear and contamination. ds: dsc: kts: electro protector 250 ml transparent kpn: Urethane Isolation kpn_dash: kpn_clear: UrethaneIsolation bkpn: CRC Urethane Isolation bkpn_clear: CRC UrethaneIsolation c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Crc / Crc technical and chemical products / Crc surface treatment and repair / Crc other surface treatment / Crc coating | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Coating sr_no_br_cl_ns: 2010100_SP250 sr_ns: CRC2010100_SP250
r: 03096322 p: 17.52 pid: 175164 b: RUST-OLEUM q: 0 st: lt: 8 ean: 8715743019296 sr: RUST-OLEUM 3478 sr_no_br: 3478 sr_no_br_cl: 3478 sr_cl: RUSTOLEUM3478 sr_dash: RUST sold: 0 p_range: none type: standard act: 1 avo: 1 av: Suitable substrate Bitumen; Concrete; Metal; Old paint layer; Plastic H-statements H222; H229; H335; H336; H411 ADR packing group ADR class 2 Application method Aerosol can Principal hazard property GHS02 Flammable EUH-statements EUH066; EUH211 Conseils de prudence (P) P101; P102; P103; P210; P211; P251; P271; P273; P391; P410 + P412; P501 UN number UN1950 Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS09 Environmental hazard Flash point -70 °C Packaging Spray can Weight 0,522 kg Product line Leakseal Net volume 500 ml Use environment Indoor and outdoor use Physical state Aerosol n: RUST-OLEUM 3478 Leakseal coating black 500ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Waterproof, semi-glossy appearance Can be finished with a latex or alkyd topcoat Can be used on aluminium and other metals, PVC, concrete, masonry, asphalt roof materials, etc. Easy to use An easy-to-use rubberised protective coating developed for filling and sealing leaks and cracks. ds: dsc: kts: Leakseal coating black 500ml kpn: 3478 kpn_dash: kpn_clear: 3478 bkpn: RUST-OLEUM 3478 bkpn_clear: RUST-OLEUM 3478 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Rust-oleum / Rust-oleum technical and chemical products / Rust-oleum surface treatment and repair / Rust-oleum other surface treatment / Rust-oleum coating sr_no_br_cl_ns: 3478 sr_ns: RUST-OLEUM3478
r: 08112913 p: 16.363 pid: 167099 b: TEROSON q: 0 st: lt: 11 ean: 4058093059234 sr: TEROSON 2978736 sr_no_br: 2978736 sr_no_br_cl: 2978736 sr_cl: TEROSON2978736 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 500 ml EUH-statements EUH066 ADR packing group ADR class 2.1 UN number UN1950 Packaging Spray can Principal hazard property GHS02 Flammable Conseils de prudence (P) P210; P211; P251; P261; P273; P280; P410 + P412 H-statements H222; H229; H319; H336; H412 Hazard class GHS02 Flammable; GHS07 Harmful or irritant Physical state Aerosol Flash point < -10 °C n: TEROSON SB 3140 Stone chip protection black (500 ml aerosol can) - 2978736 cn: COATING cn2: COATING cn_clear: COATING d: Product description Spray for stone chip protection (body repair) with a curing time of approx. 2 hours Based on synthetic resin Excellent recoatable Ideal for wear-resistant coatings, for minor repairs such as treatment of small isolated areas and finishing of repaired damage Excellent for spraying fine textures, with a curing time of about 2 hours Recommended surface treatment with TEROSON VR 10 Retains all types of factory-applied underbody coatings For coating primed, coated metal or painted parts ds: dsc: kts: Stone chip protection black (500 ml aerosol can) kpn: SB 3140 kpn_dash: kpn_clear: SB3140 bkpn: TEROSON SB 3140 bkpn_clear: TEROSON SB3140 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Teroson / Teroson technical and chemical products / Teroson surface treatment and repair / Teroson other surface treatment / Teroson coating | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Coating sr_no_br_cl_ns: 2978736 sr_ns: TEROSON2978736
r: 08076937 p: 16.363 pid: 105636 b: ZWALUW q: 0 st: lt: 8 ean: 8711595187626 sr: ZWALUW 30623739 sr_no_br: 30623739 sr_no_br_cl: 30623739 sr_cl: ZWALUW30623739 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 750 ml EUH-statements EUH208; EUH210 ADR packing group Weight 750 g UN number ADR class Physical state Liquid Packaging Spray can n: ZWALUW DEN BRAVEN Woodsealer protective coating for wood white (750 g tin) - 30623739 cn: COATING cn2: COATING cn_clear: COATING d: Product Description: Zwaluw Woodsealer is a fluid ready-to-use coating based on acrylic dispersion. The product cures due to evaporation of water to form a weatherproof and durable coating. Advantages For use on rip and cross cut sides and full surfaces of wood Ready to use Paintable with water based and synthetic paints Almost odourless Easy to apply and clean Non corrosive towards metals Application: Zwaluw Woodsealer was specifically developed as a durable protective coating for rip and cross cut sides and full surfaces of plywood and laminated wooden sheet material. Especially suitable to preserve spruce, meranti, merbau and laminated wooden sheet material (triplex, multiplex). Zwaluw Woodsealer is a SHR certified coating. Characteristics Shelf life In unopened original packaging between +5°C and +25°C, shelf life is up to 18 months from production date, stored in a dry place. ds: dsc: kts: protective coating for wood white (750 g tin) kpn: DEN BRAVEN Woodsealer kpn_dash: kpn_clear: DENBRAVENWoodsealer bkpn: ZWALUW DEN BRAVEN Woodsealer bkpn_clear: ZWALUW DENBRAVENWoodsealer c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Zwaluw / Zwaluw technical and chemical products / Zwaluw surface treatment and repair / Zwaluw other surface treatment / Zwaluw coating sr_no_br_cl_ns: 30623739 sr_ns: ZWALUW30623739
r: 08112918 p: 15.206 pid: 167069 b: LOCTITE q: 0 st: lt: 10 ean: 4058093039588 sr: LOCTITE 2792264 sr_no_br: 2792264 sr_no_br_cl: 2792264 sr_cl: LOCTITE2792264 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 100 ml ADR packing group ADR class UN number Packaging Bottle Principal hazard property GHS07 Harmful or irritant Conseils de prudence (P) P101; P102; P337 + P313; P501 H-statements H319 Hazard class GHS07 Harmful or irritant Physical state Liquid Flash point > 100 °C n: LOCTITE SF 7505 anti-rust latex resin coating (100 ml bottle) - 2792264 cn: COATING cn2: COATING cn_clear: COATING d: Product description Water-based milky coating that dries quickly Synthetic latex resin applied to rusted metal to stop rust, protect the surface and serve as a primer for a finishing coat Resistant to heat ageing up to +90 °C continuously and up to +120 °C for short periods of time ds: dsc: kts: anti-rust latex resin coating (100 ml bottle) kpn: SF 7505 kpn_dash: kpn_clear: SF7505 bkpn: LOCTITE SF 7505 bkpn_clear: LOCTITE SF7505 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Loctite / Loctite technical and chemical products / Loctite surface treatment and repair / Loctite other surface treatment / Loctite coating | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Coating sr_no_br_cl_ns: 2792264 sr_ns: LOCTITE2792264
r: 08123569 p: 13.553 pid: 166799 b: HG q: 0 st: lt: 8 ean: 8711577189921 sr: HG 201100103 sr_no_br: 201100103 sr_no_br_cl: 201100103 sr_cl: HG201100103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 1 l ADR packing group ADR class UN number Packaging Bottle Principal hazard property GHS07 Harmful or irritant Conseils de prudence (P) P101; P102; P280; P305 + P351 + P338; P333 + P313; P501 H-statements H317; H319 Hazard class GHS07 Harmful or irritant Physical state Liquid Flash point >60 °C n: HG 201100103 natural stone protector 1000 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Protects against wear and tear and topcoat deterioration Gives gloss For all types of natural stone floors HG natural stone protector is a very easy-to-apply liquid polymer emulsion which, once dry, forms a shiny and wafer-thin but extremely strong and protective film. This protects the top layer of natural stone against wear and tear and damage or attack by acids such as soft drinks and wine. This protector also gives an anti-slip effect. Application Cleaning floor Instructions for use The surface must be completely clean, free of grease and dust For the necessary treatments: see the HG natural stone floors treatment matrix on the side of this bottle The adhesive/specs and joints of new floors must be fully cured and dry This usually requires a drying time of 4-6 weeks Existing floors must be thoroughly dry after cleaning Any underfloor heating should be switched off for at least 12 hours before applying this product For good distribution, use a wax dispenser (see illustration on front of this bottle) If desired, a lint-free, clean (tea) cloth wrapped around a squeegee can also be used On coarse surfaces, use a paint roller (fur roller), but avoid excessive foaming during application with the roller Dilute the liquid 1:1 with cold water, then pour the solution over the floor and spread it, without exerting pressure on the wax dispenser or roller, in one direction over the floor When the product has dried (after about 40 minutes), a second coat can be applied at right angles to the first coat Approximately 3 hours after the last treatment the floor can be walked on normally and is fully cured after 3 days Consumption: 60-80 m2 per litre per coat ds: dsc: kts: natural stone protector 1000 ml kpn: 201100103 kpn_dash: kpn_clear: 201100103 bkpn: HG 201100103 bkpn_clear: HG 201100103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating sr_no_br_cl_ns: 201100103 sr_ns: HG201100103
r: 08123675 p: 13.057 pid: 166881 b: HG q: 0 st: lt: 8 ean: 8711577190101 sr: HG 244025103 sr_no_br: 244025103 sr_no_br_cl: 244025103 sr_cl: HG244025103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 250 ml EUH-statements EUH208 ADR packing group ADR class UN number Packaging Bottle Conseils de prudence (P) P101; P102 Physical state Liquid n: HG 244025103 wall and floor joint protector 250 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Makes joints impervious to oil Grease and moisture Absolutely colourless Including pipette HG wall and floor grout protector adheres to the cement joint and thus provides maximum, transparent protection against penetration of, for example, (edible) oil, grease and moisture. It also prevents limescale deposits. Many joints are porous and therefore easily absorb dirt, grease and moisture. Spilling wine, soft drinks or something greasy, for example, can cause stains that are difficult to remove. Dirty water can also penetrate the joints during cleaning, making them dirty and difficult to clean over time. Wall joints in damp rooms, such as the bathroom, can additionally be affected by mould and limescale. 250 ml is good for about 30 to 40 m² of joint area. Instructions for use The joints must be clean and dry First clean your joints thoroughly with HG grout cleaner Rinse the joints with clean water and then allow the joints to dry thoroughly for 24 hours Allow new joints to harden completely and dry Floor joints in bathrooms and kitchens and frequently walked on floor joints (entrance/hallway): Apply HG wall and floor grout protector using the pipette provided Use 1 to 2 ml of liquid per metre of joint (0.5 cm wide) Joints wall surface (kitchen/sanitary): Apply HG wall and floor joint protector using a brush to the joints and leave to dry for 1 hour Then apply a second coat The product must be absorbed into the joint within 5 minutes If not, remove excess with a clean cloth After 36 to 48 hours the surface may be cleaned normally again For floor joints, the floor can be walked on after approx. 3 hours Floors in the shower can be used again after 8 hours Follow the instructions for use Over-application may cause yellowing of joints Consumption: 250 ml per 30-40 m² floor area (assuming 30 x 30 cm floor tiles and a joint of 0.5 cm) ds: dsc: kts: wall and floor joint protector 250 ml kpn: 244025103 kpn_dash: kpn_clear: 244025103 bkpn: HG 244025103 bkpn_clear: HG 244025103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating sr_no_br_cl_ns: 244025103 sr_ns: HG244025103
r: 08123591 p: 11.9 pid: 166795 b: HG q: 0 st: lt: 8 ean: 8711577189914 sr: HG 200100103 sr_no_br: 200100103 sr_no_br_cl: 200100103 sr_cl: HG200100103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 1 l ADR packing group ADR class UN number Packaging Bottle Principal hazard property GHS07 Harmful or irritant Conseils de prudence (P) P101; P102; P280; P305 + P351 + P338; P333 + P313; P501 H-statements H317; H319 Hazard class GHS07 Harmful or irritant Physical state Liquid Flash point >60 °C n: HG 200100103 parquet protector gloss 1000 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Protects against wear and scratches HG parquet protector gloss is a very easy-to-apply, liquid polymer emulsion that once dry forms a glossy and wafer-thin, but extremely strong protective film. This protects the parquet's finish against wear, scratches and other damage. This protective film also gives an anti-slip effect. Application Parquet protector Instructions for use Even with new parquet, the surface must be completely clean, grease- and dust free Remove any old wax, polish and polymer layers For any necessary treatments: see the HG parquet floor treatment matrix on the side of this bottle For good distribution, preferably use a wax dispenser (see the illustration on the front of this bottle) If desired, a clean, lint-free (tea) cloth wrapped around a squeegee can also be used Pour the liquid undiluted over the floor and, without exerting pressure on the wax dispenser or squeegee, spread it over the floor in the direction of the wood grain When the product has dried, after about 60 minutes, a second coat can be applied at right angles to the first coat, if necessary Approximately 1 to 2 hours after the last treatment the floor can be walked on normally and is fully cured after 3 days Consumption: 40 m2 per litre per coat ds: dsc: kts: parquet protector gloss 1000 ml kpn: 200100103 kpn_dash: kpn_clear: 200100103 bkpn: HG 200100103 bkpn_clear: HG 200100103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating sr_no_br_cl_ns: 200100103 sr_ns: HG200100103
r: 08123554 p: 11.68 pid: 166804 b: HG q: 0 st: lt: 8 ean: 8711577189600 sr: HG 136100103 sr_no_br: 136100103 sr_no_br_cl: 136100103 sr_cl: HG136100103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 1 l EUH-statements EUH208 ADR packing group ADR class UN number Packaging Bottle Conseils de prudence (P) P102 Physical state Liquid Flash point >100 °C n: HG 136100103 laminate protection film 1000 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Gives shine Protects against wear and tear Scratches and other damage HG laminate, vinyl and PVC protector (product 70) is a very easy-to-apply, liquid polymer emulsion that once dry forms a glossy and wafer-thin, but extremely strong protective film. This protects the top layer of the laminate from wear, scratches and other damage. This product also masks dull spots and pre-existing damage and gives an anti-slip effect. 1 litre is good for about 60 m² per coat. Instructions for use The surface must be completely clean, grease- and dust-free, even with a new floor. Remove any old wax and polymer layers For the necessary treatments: see the HG treatment matrix on the side of this bottle For good distribution, preferably use a wax dispenser (see the illustration on the front of this bottle) If desired, a clean, non-fluffy (tea) cloth wrapped around a squeegee can also be used Pour a small quantity of the liquid undiluted onto the floor and spread it thinly and evenly in one direction, without exerting pressure on the wax dispenser or squeegee Do not twist or rub! When the product has dried, after about 60 minutes, a second coat can be applied at right angles to the first coat, if necessary Approximately 1 to 2 hours after the last treatment, the floor can be walked on normally and is fully cured after 3 days Consumption: 60 m² per litre per coat ds: dsc: kts: laminate protection film 1000 ml kpn: 136100103 kpn_dash: kpn_clear: 136100103 bkpn: HG 136100103 bkpn_clear: HG 136100103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Coating sr_no_br_cl_ns: 136100103 sr_ns: HG136100103
r: 08123632 p: 11 pid: 166888 b: HG q: 0 st: lt: 8 ean: 8711577189426 sr: HG 110100103 sr_no_br: 110100103 sr_no_br_cl: 110100103 sr_cl: HG110100103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 1 l EUH-statements EUH208 ADR packing group ADR class UN number Packaging Bottle Conseils de prudence (P) P101; P102 Physical state Liquid Flash point >100 °C n: HG 110100103 tile protector 1000 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Wafer-thin But extremely strong protective film Protects against penetration of dirt Stains and abrasion Gives a silky shine HG tile protector is an easy-to-apply liquid polymer emulsion for all types of floor tiles, flagstones and slate. After drying, this emulsion forms a shiny and wafer-thin, but extremely strong protective film, protecting the tile against stains, soiling, scratches and wear, while also enhancing its colour and structure. This protective film also gives an anti-slip effect. Application HG tile protective film with silk gloss (product 14) is a unique and easy-to-apply polymer emulsion for all types of floor tiles, flagstones and slate. After drying, this liquid emulsion forms a shiny and wafer-thin, but extremely strong protective film. It protects the floor tiles against wear, scratches and other damage. It also enhances the colour and structure of the floor tiles. This protective film for floor tiles, flagstones and slate also masks existing wear marks and gives an anti-slip effect. 1 litre is good for approximately 40m2 per coat. Instructions for use Surface must be completely clean, grease- and dust-free The glue/soil and joints of new floors must be fully cured and dry This usually requires 4-6 weeks drying time Existing, still porous floors must be completely dry after cleaning Floor heating must be switched off for at least 12 hours before treatment with this product Porous floors must first be treated with HG tile impregnating protector (product 13) Do not shake before use and preferably apply with a wax dispenser (see illustration on front of bottle) If desired, a clean, lint-free (tea) cloth wrapped around a squeegee can also be used On a coarse surface, use a paint roller (fur roller) Pour the liquid onto the floor and spread in straight lines in one direction, do not twist or rub When the product has dried (after about 40 minutes), a second coat can be applied at right angles to the first coat Approximately 3 hours after the last treatment the floor can be walked on normally and is fully cured after 3 days Consumption: 80 m² per 2 litres per coat ds: dsc: kts: tile protector 1000 ml kpn: 110100103 kpn_dash: kpn_clear: 110100103 bkpn: HG 110100103 bkpn_clear: HG 110100103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Coating sr_no_br_cl_ns: 110100103 sr_ns: HG110100103
