r: 03194274 p: 48.57 pid: 38684 b: PFERD q: 0 st: lt: 8 ean: 4007220808405 sr: PFERD 43200032 sr_no_br: 43200032 sr_no_br_cl: 43200032 sr_cl: PFERD43200032 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 20 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,15 mm Twisted No Height 70 mm Connection size (machine) 6 mm n: PFERD PBUIT 2022/6 INOX 0,15 brush unturned Ø 20 mm pin-Ø 6 mm stainless steel wire-Ø 0.15 - 43200032 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD INOX-TOTAL end brush crimped PBUIT dia. 20 mm shank dia. 6 mm stainless steel wire dia. 0.15 Characteristics Suitable for light brushing such as deburring, cleaning, and removal of heat discolouration In addition to brushes with a stainless steel filament, PFERD also offers brushes for work on stainless steel (INOX) with the INOX-TOTAL type They are particularly well-suited to use in extremely critical environments In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Maximum protection against corrosion as all components are produced from stainless steel (INOX) in quality 1.4310 (V2A). Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: brush unturned Ø 20 mm pin-Ø 6 mm stainless steel wire-Ø 0.15 kpn: PBUIT 2022/6 INOX 0,15 kpn_dash: kpn_clear: PBUIT20226INOX015 bkpn: PFERD PBUIT 2022/6 INOX 0,15 bkpn_clear: PFERD PBUIT20226INOX015 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43200032 sr_ns: PFERD43200032
r: 08077714 p: 45.24 pid: 35089 b: PFERD q: 0 st: lt: 8 ean: 4007220598085 sr: PFERD 43209007 sr_no_br: 43209007 sr_no_br_cl: 43209007 sr_cl: PFERD43209007 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 30 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,15 mm Twisted No Height 68 mm Connection size (machine) 6 mm n: PFERD PBG 3028/6 INOX 0,15 brush with plastic protection twisted Ø 30 mm pin-Ø 6 mm stainless steel wire-Ø 0.15 - 43209007 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD End brush with plastic protection knotted PBG dia. 30 mm shank dia. 6 mm stainless steel wire dia. 0.15 Characteristics Aggressive brush Suitable for medium-duty brushing such as deburring, cleaning, derusting and descaling, as well as removing spatter End brush with plastic-covered brush body In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Optimal access to hard-to-reach areas such as recesses and drilled holes. The plastic covering prevents the risk of corrosion. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: brush with plastic protection twisted Ø 30 mm pin-Ø 6 mm stainless steel wire-Ø 0.15 kpn: PBG 3028/6 INOX 0,15 kpn_dash: kpn_clear: PBG30286INOX015 bkpn: PFERD PBG 3028/6 INOX 0,15 bkpn_clear: PFERD PBG30286INOX015 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43209007 sr_ns: PFERD43209007
r: 08077701 p: 43.45 pid: 35360 b: PFERD q: 0 st: lt: 8 ean: 4007220936634 sr: PFERD 43208012 sr_no_br: 43208012 sr_no_br_cl: 43208012 sr_cl: PFERD43208012 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 23 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,15 mm Twisted No Height 68 mm Connection size (machine) 6 mm n: PFERD PBG 2323/6 INOX 0,15 brush with plastic protection twisted Ø 23 mm pin-Ø 6 mm stainless steel wire-Ø 0.15 - 43208012 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD End brush with plastic protection knotted PBG dia. 23 mm shank dia. 6 mm stainless steel wire dia. 0.15 Characteristics Aggressive brush Suitable for medium-duty brushing such as deburring, cleaning, derusting and descaling, as well as removing spatter End brush with plastic-covered brush body In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Optimal access to hard-to-reach areas such as recesses and drilled holes. The plastic covering prevents the risk of corrosion. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: brush with plastic protection twisted Ø 23 mm pin-Ø 6 mm stainless steel wire-Ø 0.15 kpn: PBG 2323/6 INOX 0,15 kpn_dash: kpn_clear: PBG23236INOX015 bkpn: PFERD PBG 2323/6 INOX 0,15 bkpn_clear: PFERD PBG23236INOX015 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43208012 sr_ns: PFERD43208012
r: 08077766 p: 41 pid: 35148 b: PFERD q: 0 st: lt: 8 ean: 4007220532447 sr: PFERD 43706006 sr_no_br: 43706006 sr_no_br_cl: 43706006 sr_cl: PFERD43706006 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 30 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,35 mm Twisted No Height 68 mm Connection size (machine) 6 mm n: PFERD POS PBG 3028/6 INOX 0,35 brush with plastic protection twisted Ø 30 mm pin-Ø 6 mm stainless steel wire-Ø 0.35 - 43706006 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD POS end brush with plastic protection knotted PBG dia. 30 mm shank dia. 6 mm stainless steel wire dia. 0.35 Characteristics Aggressive brush Suitable for medium-duty brushing such as deburring, cleaning, derusting and descaling, as well as removing spatter End brush with plastic-covered brush body In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Optimal access to hard-to-reach areas such as recesses and drilled holes. The plastic covering prevents the risk of corrosion. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: brush with plastic protection twisted Ø 30 mm pin-Ø 6 mm stainless steel wire-Ø 0.35 kpn: POS PBG 3028/6 INOX 0,35 kpn_dash: kpn_clear: POSPBG30286INOX035 bkpn: PFERD POS PBG 3028/6 INOX 0,35 bkpn_clear: PFERD POSPBG30286INOX035 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43706006 sr_ns: PFERD43706006
r: 03194273 p: 40.77 pid: 38213 b: PFERD q: 0 st: lt: 8 ean: 4007220808399 sr: PFERD 43200027 sr_no_br: 43200027 sr_no_br_cl: 43200027 sr_cl: PFERD43200027 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 15 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,2 mm Twisted No Height 65 mm Connection size (machine) 6 mm n: PFERD PBUIT 1516/6 INOX 0,20 brush unturned Ø 15 mm pin-Ø 6 mm stainless steel wire-Ø 0.20 - 43200027 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD INOX-TOTAL end brush crimped PBUIT dia. 15 mm shank dia. 6 mm stainless steel wire dia. 0.20 Characteristics Suitable for light brushing such as deburring, cleaning, and removal of heat discolouration In addition to brushes with a stainless steel filament, PFERD also offers brushes for work on stainless steel (INOX) with the INOX-TOTAL type They are particularly well-suited to use in extremely critical environments In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Maximum protection against corrosion as all components are produced from stainless steel (INOX) in quality 1.4310 (V2A). Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: brush unturned Ø 15 mm pin-Ø 6 mm stainless steel wire-Ø 0.20 kpn: PBUIT 1516/6 INOX 0,20 kpn_dash: kpn_clear: PBUIT15166INOX020 bkpn: PFERD PBUIT 1516/6 INOX 0,20 bkpn_clear: PFERD PBUIT15166INOX020 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43200027 sr_ns: PFERD43200027
r: 03194270 p: 40.73 pid: 38681 b: PFERD q: 0 st: lt: 8 ean: 4007220808382 sr: PFERD 43200022 sr_no_br: 43200022 sr_no_br_cl: 43200022 sr_cl: PFERD43200022 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 15 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,15 mm Twisted No Height 65 mm Connection size (machine) 6 mm n: PFERD PBUIT 1516/6 INOX 0,15 brush unturned Ø 15 mm pin-Ø 6 mm stainless steel wire-Ø 0.15 - 43200022 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD INOX-TOTAL end brush crimped PBUIT dia. 15 mm shank dia. 6 mm stainless steel wire dia. 0.15 Characteristics Suitable for light brushing such as deburring, cleaning, and removal of heat discolouration In addition to brushes with a stainless steel filament, PFERD also offers brushes for work on stainless steel (INOX) with the INOX-TOTAL type They are particularly well-suited to use in extremely critical environments In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Maximum protection against corrosion as all components are produced from stainless steel (INOX) in quality 1.4310 (V2A). Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: brush unturned Ø 15 mm pin-Ø 6 mm stainless steel wire-Ø 0.15 kpn: PBUIT 1516/6 INOX 0,15 kpn_dash: kpn_clear: PBUIT15166INOX015 bkpn: PFERD PBUIT 1516/6 INOX 0,15 bkpn_clear: PFERD PBUIT15166INOX015 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43200022 sr_ns: PFERD43200022
r: 08077634 p: 40.14 pid: 36813 b: PFERD q: 0 st: lt: 8 ean: 4007220808429 sr: PFERD 43200102 sr_no_br: 43200102 sr_no_br_cl: 43200102 sr_cl: PFERD43200102 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 10 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,2 mm Twisted Yes Height 65 mm Connection size (machine) 6 mm n: PFERD PBGSIT 1010/6 INOX 0,20 singletwist brush twisted Ø10 mm pin-Ø6 mm stainless steel wire-Ø0.20 - 43200102 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD SINGLETWIST INOX-TOTAL end brush knotted PBGSIT dia. 10 mm shank dia. 6 mm stainless steel wire dia. 0.20 Characteristics Particularly flexible single-knot brush for special applications In addition to brushes with a stainless steel filament, PFERD also offers brushes for work on stainless steel (INOX) with the INOX-TOTAL type They are particularly well-suited to use in extremely critical environments In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Maximum protection against corrosion as all components are produced from stainless steel (INOX) in quality 1.4310 (V2A). Optimal access to hard-to-reach areas such as inside corners, as the knot is less likely to unravel. Very good corrosion resistance. ds: dsc: kts: singletwist brush twisted Ø10 mm pin-Ø6 mm stainless steel wire-Ø0.20 kpn: PBGSIT 1010/6 INOX 0,20 kpn_dash: kpn_clear: PBGSIT10106INOX020 bkpn: PFERD PBGSIT 1010/6 INOX 0,20 bkpn_clear: PFERD PBGSIT10106INOX020 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43200102 sr_ns: PFERD43200102
r: 04023375 p: 40.05 pid: 38507 b: PFERD q: 0 st: lt: 8 ean: 4007220808436 sr: PFERD 43200107 sr_no_br: 43200107 sr_no_br_cl: 43200107 sr_cl: PFERD43200107 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 10 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,35 mm Twisted Yes Height 65 mm Connection size (machine) 6 mm n: PFERD PBGSIT 1010/6 INOX 0,35 singletwist brush twisted Ø10 mm pin-Ø6 mm stainless steel wire-Ø0.35 - 43200107 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD SINGLETWIST INOX-TOTAL end brush knotted PBGSIT dia. 10 mm shank dia. 6 mm stainless steel wire dia. 0.35 Characteristics Particularly flexible single-knot brush for special applications In addition to brushes with a stainless steel filament, PFERD also offers brushes for work on stainless steel (INOX) with the INOX-TOTAL type They are particularly well-suited to use in extremely critical environments In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Maximum protection against corrosion as all components are produced from stainless steel (INOX) in quality 1.4310 (V2A). Optimal access to hard-to-reach areas such as inside corners, as the knot is less likely to unravel. Very good corrosion resistance. ds: dsc: kts: singletwist brush twisted Ø10 mm pin-Ø6 mm stainless steel wire-Ø0.35 kpn: PBGSIT 1010/6 INOX 0,35 kpn_dash: kpn_clear: PBGSIT10106INOX035 bkpn: PFERD PBGSIT 1010/6 INOX 0,35 bkpn_clear: PFERD PBGSIT10106INOX035 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43200107 sr_ns: PFERD43200107
r: 08077715 p: 38.91 pid: 35377 b: PFERD q: 0 st: lt: 8 ean: 4007220936689 sr: PFERD 43209012 sr_no_br: 43209012 sr_no_br_cl: 43209012 sr_cl: PFERD43209012 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 30 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,25 mm Twisted Yes Height 68 mm Connection size (machine) 6 mm n: PFERD PBG 3028/6 INOX 0,25 brush with plastic protection twisted Ø 30 mm pin-Ø 6 mm stainless steel wire-Ø 0.25 - 43209012 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD End brush with plastic protection knotted PBG dia. 30 mm shank dia. 6 mm stainless steel wire dia. 0.25 Characteristics Aggressive brush Suitable for medium-duty brushing such as deburring, cleaning, derusting and descaling, as well as removing spatter End brush with plastic-covered brush body In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Optimal access to hard-to-reach areas such as recesses and drilled holes. The plastic covering prevents the risk of corrosion. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: brush with plastic protection twisted Ø 30 mm pin-Ø 6 mm stainless steel wire-Ø 0.25 kpn: PBG 3028/6 INOX 0,25 kpn_dash: kpn_clear: PBG30286INOX025 bkpn: PFERD PBG 3028/6 INOX 0,25 bkpn_clear: PFERD PBG30286INOX025 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43209012 sr_ns: PFERD43209012
r: 08077716 p: 38.11 pid: 34249 b: PFERD q: 0 st: lt: 8 ean: 4007220531099 sr: PFERD 43209004 sr_no_br: 43209004 sr_no_br_cl: 43209004 sr_cl: PFERD43209004 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 30 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,35 mm Twisted Yes Height 68 mm Connection size (machine) 6 mm n: PFERD PBG 3028/6 INOX 0,35 brush with plastic protection twisted Ø 30 mm pin-Ø 6 mm stainless steel wire-Ø 0.35 - 43209004 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD End brush with plastic protection knotted PBG dia. 30 mm shank dia. 6 mm stainless steel wire dia. 0.35 Characteristics Aggressive brush Suitable for medium-duty brushing such as deburring, cleaning, derusting and descaling, as well as removing spatter End brush with plastic-covered brush body In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Optimal access to hard-to-reach areas such as recesses and drilled holes. The plastic covering prevents the risk of corrosion. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: brush with plastic protection twisted Ø 30 mm pin-Ø 6 mm stainless steel wire-Ø 0.35 kpn: PBG 3028/6 INOX 0,35 kpn_dash: kpn_clear: PBG30286INOX035 bkpn: PFERD PBG 3028/6 INOX 0,35 bkpn_clear: PFERD PBG30286INOX035 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43209004 sr_ns: PFERD43209004
r: 08077702 p: 37.72 pid: 34238 b: PFERD q: 0 st: lt: 8 ean: 4007220936641 sr: PFERD 43208022 sr_no_br: 43208022 sr_no_br_cl: 43208022 sr_cl: PFERD43208022 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 23 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,25 mm Twisted No Height 68 mm Connection size (machine) 6 mm n: PFERD PBG 2323/6 INOX 0,25 brush with plastic protection twisted Ø 23 mm pin-Ø 6 mm stainless steel wire-Ø 0.25 - 43208022 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD End brush with plastic protection knotted PBG dia. 23 mm shank dia. 6 mm stainless steel wire dia. 0.25 Characteristics Aggressive brush Suitable for medium-duty brushing such as deburring, cleaning, derusting and descaling, as well as removing spatter End brush with plastic-covered brush body In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Optimal access to hard-to-reach areas such as recesses and drilled holes. The plastic covering prevents the risk of corrosion. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: brush with plastic protection twisted Ø 23 mm pin-Ø 6 mm stainless steel wire-Ø 0.25 kpn: PBG 2323/6 INOX 0,25 kpn_dash: kpn_clear: PBG23236INOX025 bkpn: PFERD PBG 2323/6 INOX 0,25 bkpn_clear: PFERD PBG23236INOX025 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43208022 sr_ns: PFERD43208022
r: 03151952 p: 36.88 pid: 69991 b: PFERD q: 0 st: lt: 8 ean: 4007220936658 sr: PFERD 43208027 sr_no_br: 43208027 sr_no_br_cl: 43208027 sr_cl: PFERD43208027 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 23 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,35 mm Twisted No Height 68 mm Connection size (machine) 6 mm n: PFERD PBG 2323/6 INOX 0,35 brush with plastic protection twisted Ø 23 mm pin-Ø 6 mm stainless steel wire-Ø 0.35 - 43208027 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD End brush with plastic protection knotted PBG dia. 23 mm shank dia. 6 mm stainless steel wire dia. 0.35 Characteristics Aggressive brush Suitable for medium-duty brushing such as deburring, cleaning, derusting and descaling, as well as removing spatter End brush with plastic-covered brush body In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Optimal access to hard-to-reach areas such as recesses and drilled holes. The plastic covering prevents the risk of corrosion. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: brush with plastic protection twisted Ø 23 mm pin-Ø 6 mm stainless steel wire-Ø 0.35 kpn: PBG 2323/6 INOX 0,35 kpn_dash: kpn_clear: PBG23236INOX035 bkpn: PFERD PBG 2323/6 INOX 0,35 bkpn_clear: PFERD PBG23236INOX035 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43208027 sr_ns: PFERD43208027
r: 08077752 p: 36.87 pid: 35131 b: PFERD q: 0 st: lt: 8 ean: 4007220004586 sr: PFERD 43211204 sr_no_br: 43211204 sr_no_br_cl: 43211204 sr_cl: PFERD43211204 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 70 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,2 mm Twisted No Height 80 mm Connection size (machine) 6 mm n: PFERD TBU 7015/6 INOX 0,20 cup brush unturned Ø 70 mm pin-Ø 6 mm stainless steel wire-Ø 0.20 - 43211204 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD Cup brush crimped TBU dia. 70 mm shank dia. 6 mm stainless steel wire dia. 0.20 Characteristics Generally suitable for cleaning, derusting and smoothing, as well as removal of corrosion and paint Particularly suitable for brushing on large, flat and easily accessible surfaces due to face-down use with the entire brush face applied to the workpiece In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Cup brush with plastic-covered brush body Advantages: Low risk of contaminating the workpiece. Highly flexible, enabling optimal adjustment to the workpiece contour. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: cup brush unturned Ø 70 mm pin-Ø 6 mm stainless steel wire-Ø 0.20 kpn: TBU 7015/6 INOX 0,20 kpn_dash: kpn_clear: TBU70156INOX020 bkpn: PFERD TBU 7015/6 INOX 0,20 bkpn_clear: PFERD TBU70156INOX020 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43211204 sr_ns: PFERD43211204
r: 08077760 p: 36.72 pid: 34540 b: PFERD q: 0 st: lt: 8 ean: 4007220532430 sr: PFERD 43706002 sr_no_br: 43706002 sr_no_br_cl: 43706002 sr_cl: PFERD43706002 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 19 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,35 mm Twisted No Height 68 mm Connection size (machine) 6 mm n: PFERD POS PBG 1919/6 INOX 0,35 brush with plastic protection twisted Ø 19 mm pin-Ø 6 mm stainless steel wire-Ø 0.35 mm - 43706002 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD POS end brush with plastic protection knotted PBG dia. 19 mm shank dia. 6 mm stainless steel wire dia. 0.35 mm (10) Characteristics Aggressive brush Suitable for medium-duty brushing such as deburring, cleaning, derusting and descaling, as well as removing spatter End brush with plastic-covered brush body In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Optimal access to hard-to-reach areas such as recesses and drilled holes. The plastic covering prevents the risk of corrosion. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: brush with plastic protection twisted Ø 19 mm pin-Ø 6 mm stainless steel wire-Ø 0.35 mm kpn: POS PBG 1919/6 INOX 0,35 kpn_dash: kpn_clear: POSPBG19196INOX035 bkpn: PFERD POS PBG 1919/6 INOX 0,35 bkpn_clear: PFERD POSPBG19196INOX035 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43706002 sr_ns: PFERD43706002
r: 08077717 p: 36.15 pid: 36850 b: PFERD q: 0 st: lt: 8 ean: 4007220531105 sr: PFERD 43209005 sr_no_br: 43209005 sr_no_br_cl: 43209005 sr_cl: PFERD43209005 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 30 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,6 mm Twisted Yes Height 68 mm Connection size (machine) 6 mm n: PFERD PBG 3028/6 INOX 0,60 brush with plastic protection twisted Ø 30 mm pin-Ø 6 mm stainless steel wire-Ø 0.60 - 43209005 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD End brush with plastic protection knotted PBG dia. 30 mm shank dia. 6 mm stainless steel wire dia. 0.60 Characteristics Aggressive brush Suitable for medium-duty brushing such as deburring, cleaning, derusting and descaling, as well as removing spatter End brush with plastic-covered brush body In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Optimal access to hard-to-reach areas such as recesses and drilled holes. The plastic covering prevents the risk of corrosion. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: brush with plastic protection twisted Ø 30 mm pin-Ø 6 mm stainless steel wire-Ø 0.60 kpn: PBG 3028/6 INOX 0,60 kpn_dash: kpn_clear: PBG30286INOX060 bkpn: PFERD PBG 3028/6 INOX 0,60 bkpn_clear: PFERD PBG30286INOX060 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43209005 sr_ns: PFERD43209005
r: 08077694 p: 35.92 pid: 35354 b: PFERD q: 0 st: lt: 8 ean: 4007220936597 sr: PFERD 43207013 sr_no_br: 43207013 sr_no_br_cl: 43207013 sr_cl: PFERD43207013 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 19 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,25 mm Twisted No Height 68 mm Connection size (machine) 6 mm n: PFERD PBG 1919/6 INOX 0,25 brush with plastic protection twisted Ø 19 mm pin-Ø 6 mm stainless steel wire-Ø 0.25 - 43207013 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD End brush with plastic protection knotted PBG dia. 19 mm shank dia. 6 mm stainless steel wire dia. 0.25 Characteristics Aggressive brush Suitable for medium-duty brushing such as deburring, cleaning, derusting and descaling, as well as removing spatter End brush with plastic-covered brush body In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Optimal access to hard-to-reach areas such as recesses and drilled holes. The plastic covering prevents the risk of corrosion. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: brush with plastic protection twisted Ø 19 mm pin-Ø 6 mm stainless steel wire-Ø 0.25 kpn: PBG 1919/6 INOX 0,25 kpn_dash: kpn_clear: PBG19196INOX025 bkpn: PFERD PBG 1919/6 INOX 0,25 bkpn_clear: PFERD PBG19196INOX025 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43207013 sr_ns: PFERD43207013
r: 08137011 p: 35.5 pid: 179919 b: MILWAUKEE q: 0 st: lt: 8 ean: 4058546644499 sr: MILWAUKEE 4932501733 sr_no_br: 4932501733 sr_no_br_cl: 4932501733 sr_cl: MILWAUKEE4932501733 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 22 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,35 mm Height 72 mm Connection size (machine) 6 mm n: MILWAUKEE 4932501733 knob end brush S6 22x28x72mm stainless steel 0.35mm (3 pcs) cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description End brushes with knotted wire are used for medium duty brushing such as cleaning corners, holes and moulds and for removing paint and rubber residue. The knots will open according to the speed and therefore are great for processing hard-to-reach areas. They have almost the same application as end brushes with crimped wire, but with a more aggressive effect. Optimum and even knotting for smooth, lower vibration running. Special flower shape for long lifetime. Use of high strength wire for aggressive brushing and therefore best removal results. Suitable for straight grinders with max RPM of 20,000. ds: MILWAUKEE® Work Hard, Play Hard promotion Receive a FREE radio or speaker ! Promotion valid from March 1 to May 31, 2026. Spend at least €449 excl. VAT on MILWAUKEE® products and receive a free radio or speaker. How does it work? Spend a minimum of €449 excl. VAT on MILWAUKEE® products in March, April or May. Register your purchase via the official promotion page . Registration is possible until June 14, 2026 . The invoice date must be between 01.03.2026 and 31.05.2026 . After approval of your registration, you will receive the radio or speaker within 30 days , shipped directly by Milwaukee. Maximum of 1 radio or speaker per customer per month . Please note: You can only submit one invoice per registration; combining invoices is not possible. Which radio or speaker can you receive? Free M12 SPEJSG2-0 (4933498433) with purchases from €449 excl. VAT. Free M18 SPEJSG2-0 (4933493530) with purchases from €749 excl. VAT. Free M18 RADDAB+ G2-0 (4933492344) with purchases from €1,049 excl. VAT. Free M18 RC-0 (4933446639) with purchases from €1,399 excl. VAT. Free M18 PRCDAB+-0 (4933472112) with purchases from €1,799 excl. VAT. dsc: kts: knob end brush S6 22x28x72mm stainless steel 0.35mm (3 pcs) kpn: 4932501733 kpn_dash: kpn_clear: 4932501733 bkpn: MILWAUKEE 4932501733 bkpn_clear: MILWAUKEE 4932501733 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Promotions / Promotions / Brand promotions / Milwaukee promotions / Milwaukee work hard, play hard 2026 | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush | Home / Our brands / Milwaukee / Milwaukee tools / Milwaukee machining tools / Milwaukee surface treatment / Milwaukee sanding, sharpening, polishing and deburring / Milwaukee detail brush sr_no_br_cl_ns: 4932501733 sr_ns: MILWAUKEE4932501733
r: 03164399 p: 34.62 pid: 69482 b: PFERD q: 0 st: lt: 8 ean: 4007220220658 sr: PFERD 43201004 sr_no_br: 43201004 sr_no_br_cl: 43201004 sr_cl: PFERD43201004 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 30 mm Connection type (machine) Shank Material (brush filament) Silicon carbide Wire thickness 0,9 mm Twisted No Height 70 mm Connection size (machine) 6 mm n: PFERD PBU 3029/6 SiC 180 0,90 brush unturned Ø 30 mm pin-Ø 6 mm SiC filament wire-Ø 0.90 grit 180 - 43201004 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD End brush crimped PBU dia. 30 mm shank dia. 6 mm SiC filament dia. 0.90 grit 180 Characteristics Suitable for light brushing such as deburring, cleaning and derusting Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Advantages: Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: brush unturned Ø 30 mm pin-Ø 6 mm SiC filament wire-Ø 0.90 grit 180 kpn: PBU 3029/6 SiC 180 0,90 kpn_dash: kpn_clear: PBU30296SiC180090 bkpn: PFERD PBU 3029/6 SiC 180 0,90 bkpn_clear: PFERD PBU30296SiC180090 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43201004 sr_ns: PFERD43201004
r: 04023412 p: 34.18 pid: 38521 b: PFERD q: 0 st: lt: 8 ean: 4007220220702 sr: PFERD 43207003 sr_no_br: 43207003 sr_no_br_cl: 43207003 sr_cl: PFERD43207003 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 19 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,35 mm Twisted Yes Height 68 mm Connection size (machine) 6 mm n: PFERD PBG 1919/6 INOX 0,35 brush with plastic protection twisted Ø 19 mm pin-Ø 6 mm stainless steel wire-Ø 0.35 - 43207003 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD End brush with plastic protection knotted PBG dia. 19 mm shank dia. 6 mm stainless steel wire dia. 0.35 Characteristics Aggressive brush Suitable for medium-duty brushing such as deburring, cleaning, derusting and descaling, as well as removing spatter End brush with plastic-covered brush body In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Optimal access to hard-to-reach areas such as recesses and drilled holes. The plastic covering prevents the risk of corrosion. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: brush with plastic protection twisted Ø 19 mm pin-Ø 6 mm stainless steel wire-Ø 0.35 kpn: PBG 1919/6 INOX 0,35 kpn_dash: kpn_clear: PBG19196INOX035 bkpn: PFERD PBG 1919/6 INOX 0,35 bkpn_clear: PFERD PBG19196INOX035 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43207003 sr_ns: PFERD43207003
r: 08077703 p: 33.24 pid: 35364 b: PFERD q: 0 st: lt: 8 ean: 4007220936665 sr: PFERD 43208032 sr_no_br: 43208032 sr_no_br_cl: 43208032 sr_cl: PFERD43208032 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 23 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,6 mm Twisted No Height 68 mm Connection size (machine) 6 mm n: PFERD PBG 2323/6 INOX 0,60 brush with plastic protection twisted Ø 23 mm pin-Ø 6 mm stainless steel wire-Ø 0.60 - 43208032 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD End brush with plastic protection knotted PBG dia. 23 mm shank dia. 6 mm stainless steel wire dia. 0.60 Characteristics Aggressive brush Suitable for medium-duty brushing such as deburring, cleaning, derusting and descaling, as well as removing spatter End brush with plastic-covered brush body In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Optimal access to hard-to-reach areas such as recesses and drilled holes. The plastic covering prevents the risk of corrosion. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: brush with plastic protection twisted Ø 23 mm pin-Ø 6 mm stainless steel wire-Ø 0.60 kpn: PBG 2323/6 INOX 0,60 kpn_dash: kpn_clear: PBG23236INOX060 bkpn: PFERD PBG 2323/6 INOX 0,60 bkpn_clear: PFERD PBG23236INOX060 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43208032 sr_ns: PFERD43208032
