r: 87051307 p: 6.14 pid: 17131 b: FISCHER q: 0 st: lt: 8 ean: 4006209607602 sr: FISCHER 60760 sr_no_br: 60760 sr_no_br_cl: 60760 sr_cl: FISCHER60760 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Material Steel Surface treatment Zinc plated n: FISCHER FZA 14x60 M8 Zykon female threaded anchor electrolytically zinc-plated - 60760 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The internally threaded anchor with the highest safety for cracked concrete. The fischer ZYKON internal threaded anchor FZA-I is an anchor made of zinc-plated steel. The special drill bit FZUB is used to create the undercut drill hole in a single work step. The undercut anchor is set in the pre-positioned installation. The expansion sleeve is driven above the cone with the setting tool FZE Plus and fills the undercut drill hole with a positive fit. The fischer ZYKON internal threaded anchor FZA-I is ideal for fixing steel constructions, ceiling installations, and consoles within internal areas in cracked concrete. Maximum safety due to a positive fit connection High flexibility due to using conventional metric screws and threaded rods Surface flush removal possible Fast installation, no exchanging tools. This saves time and costs ETA approval for cracked concrete and fire resistance class R 120 The special ZYKON undercut technology allows for a positive fit connection and ensures maximum safety, even in large cracks The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use The FZA-I allows for surface flush removal and reuse of the fixing point, and therefore offers the best possible flexibility Furthermore, the ZYKON undercut anchor FZA-I offers all the benefits of the FZA Suitable for FZA-I with internal thread is suitable for pre-positioned installation The undercut drill hole is created using the special FZUB drill Once the anchor has been placed in the drill hole, the expansion sleeve is driven over the cone using the FZE Plus setting tool, and the undercut drill hole is filled with a positive fit Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates ds: dsc: kts: Zykon female threaded anchor electrolytically zinc-plated kpn: FZA 14x60 M8 kpn_dash: kpn_clear: FZA14x60M8 bkpn: FISCHER FZA 14x60 M8 bkpn_clear: FISCHER FZA14x60M8 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 60760 sr_ns: FISCHER60760
r: 02714456 p: 6.13 pid: 176000 b: FISCHER q: 0 st: lt: 6 ean: 4006209468470 sr: FISCHER 46847 sr_no_br: 46847 sr_no_br_cl: 46847 sr_cl: FISCHER46847 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 46847 Safety anchor FH II 18/10 with hexagonal head electrolytically zinc plated cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with sophisticated design in cracked concrete. The fischer high-performance anchor FH II S with hexagonal head is a sleeve anchor made of zinc-plated steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorbs the torque slippage. This means that the fixture is pulled towards the anchoring base. The fischer high-performance anchor FH II S with hexagonal head is ideally suited to fix consoles, steel constructions, and cable trays in cracked and non-cracked concrete. The international approvals guarantee maximum safety and maximum performance. Also for applications in earthquake regions (seismic C1 and C2) The ideal combination of screw shank and sleeve enables a high transverse load capacity and fewer fixing points The optimised geometry intelligently reduces the setting energy and thus ensures a force-saving assembly The international approvals guarantee maximum safety and the best performance. The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2) The low profile of the screw head ensures for a discreet fixing The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required The optimised geometry intelligently reduces the energy required for assembly The approval regulates the use of hollow drills Suitable for The FH II is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The black plastic ring prevents rotation when tightening the anchor, and acts as a crumple zone to take the torque slippage so that the fixture is pulled onto the anchor base Available head shapes for flexible design solutions:Countersunk head (type SK), hexagon head (type S), bolt version with nut and washer (type B) and cap nut (type H) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Guard rails Staircases Consoles Steel constructions Ladders Cable trays Machines Gates Façades Gratings ds: dsc: kts: Safety anchor FH II 18/10 with hexagonal head electrolytically zinc plated kpn: 46847 kpn_dash: kpn_clear: 46847 bkpn: FISCHER 46847 bkpn_clear: FISCHER 46847 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 46847 sr_ns: FISCHER46847
r: 87990761 p: 4.9 pid: 74823 b: FISCHER q: 0 st: lt: 1 ean: 4006209484142 sr: FISCHER 48414 sr_no_br: 48414 sr_no_br_cl: 48414 sr_cl: FISCHER48414 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Drilling diameter 12 mm Overall length 40 mm n: FISCHER EA II M10 x 40 A4 impact anchor - 48414 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The internally threaded anchor made of stainless steel with a rim for simple Hammerset installation. The fischer Hammerset anchor EA II R is an internal threaded anchor made of stainless steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EHS Plus or the machine setting tool EMS the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer Hammerset anchor EA II R is ideal for fixing steel constructions and formwork props in external areas with approval. Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve Use of standard metric screws and threaded rods lowers complexity Power-saving series installation with machine setting tool EA II S-SDS ETA approval for non-cracked concrete and multiple fixings Made of stainless steel for fixings used outside The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use The EMS machine setting tool allows for effortless installation, particularly in the case of series installations The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety Fixing point at hef 25 mm prevents anchor of falling out of the drill hole before being expanded The black fixing point prevents the anchor from falling out of the drill hole during overhead installation Suitable for The EA II is suitable for pre-positioned installation Position the hammerset anchor in the drill hole and drive in flush to the surface of the anchor base using the hammer The sleeve is then expanded by driving in the internal bolt with the EHS Plus setting tool (alternative: EMS machine setting tool), and expanded against the drill hole wall The setting tools must sit on the rim of the anchor to ensure correct expansion Building materials Approved for: Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Pipelines and ventilation ducts Sprinkler systems Cable conduits and wires Gratings Steel constructions Machines Consoles Shuttering props ds: dsc: kts: impact anchor kpn: EA II M10 x 40 A4 kpn_dash: kpn_clear: EAIIM10x40A4 bkpn: FISCHER EA II M10 x 40 A4 bkpn_clear: FISCHER EAIIM10x40A4 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 48414 sr_ns: FISCHER48414
r: 02019389 p: 4.86 pid: 10573 b: FISCHER q: 0 st: lt: 8 ean: 4006209902707 sr: FISCHER 90270 sr_no_br: 90270 sr_no_br_cl: 90270 sr_cl: FISCHER90270 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 12 mm Overall length 114 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 18 mm n: FISCHER TA M12 T/25 S sleeve anchor push-through assembly zinc plated - 90270 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The installation-friendly push-through anchor for fixings in non-cracked concrete. The fischer heavy-duty anchor TA M-T is a push-through anchor for time-saving through-type installation made of zinc-plated steel. During installation the cone is pulled into the expansion sleeve and expands it against the hole wall. The heavy-duty anchor is ideal for fixing consoles, ladders, and steel constructions in non-cracked concrete. Simple assembly due to low setting energy Low axial and edge distances due to uniform load introduction ETA approval for non-cracked concrete The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M-T is extremely flexible The detachable screw connection allows for surface flush removal Suitable for The TA M-T is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Handrails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: sleeve anchor push-through assembly zinc plated kpn: TA M12 T/25 S kpn_dash: kpn_clear: TAM12T25S bkpn: FISCHER TA M12 T/25 S bkpn_clear: FISCHER TAM12T25S c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 90270 sr_ns: FISCHER90270
r: 08134139 p: 4.64 pid: 176416 b: FISCHER q: 0 st: lt: 8 ean: 4048962396126 sr: FISCHER 554926 sr_no_br: 554926 sr_no_br_cl: 554926 sr_cl: FISCHER554926 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 18 mm Overall length 97,5 mm Material Steel Surface treatment Zinc plated n: FISCHER 554926 afschooranker FH II 18/90 NL SCD cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The moment-controlled shear anchor for maximum safety. Perfect form closure of the anchor in ribbed or hollow-core slab floors With extra-large washer for almost all shoring feet Visual check after assembly by green signal element Can be installed with an impact spanner and does not need to be checked with a torque wrench The torque-controlled washer guarantees correct installation torque for easy and safe assembly The mechanical and visual check of the FH II NL SCD allows installation without a torque spanner. The use of an impact spanner allows quick and user-friendly mounting. Both assembly and disassembly of the FH II NL SCD can be carried out with one cap size. The fischer cantilever anchor FH II NL SCD has been specially developed for fixing braces on hollow-core slabs and ribbed floors. Bracing on concrete walls requires secure anchoring. When mounted, the cone is pulled into the spreader sleeve, which then clamps against the borehole wall. The black crumple zone prevents the Bracing Anchor from rotating along and absorbs the tightening slip. The black plastic ring prevents the anchor from being tightened beyond the maximum torque. The green signal element becomes visible as soon as the correct torque is achieved. This visual check therefore indicates that the anchor has been correctly assembled and provides security and safety on the construction site. After dismantling, no protruding parts remain in the borehole, reducing the risk of accidents. Applications Braces Building materials Suitable for: Ductile slabs C40/50 Ribbed concrete slabs C40/50 Solid concrete >= C20/25 ds: dsc: kts: afschooranker FH II 18/90 NL SCD kpn: 554926 kpn_dash: kpn_clear: 554926 bkpn: FISCHER 554926 bkpn_clear: FISCHER 554926 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 554926 sr_ns: FISCHER554926
r: 02019468 p: 4.45 pid: 9994 b: FISCHER q: 0 st: lt: 8 ean: 4006209484128 sr: FISCHER 48412 sr_no_br: 48412 sr_no_br_cl: 48412 sr_cl: FISCHER48412 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Drilling diameter 10 mm n: FISCHER EA II M8x40 A4 weft anchor stainless steel - 48412 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The internally threaded anchor made of stainless steel with a rim for simple Hammerset installation. The fischer Hammerset anchor EA II R is an internal threaded anchor made of stainless steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EHS Plus or the machine setting tool EMS the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer Hammerset anchor EA II R is ideal for fixing steel constructions and formwork props in external areas with approval. Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve Use of standard metric screws and threaded rods lowers complexity Power-saving series installation with machine setting tool EA II S-SDS ETA approval for non-cracked concrete and multiple fixings Made of stainless steel for fixings used outside The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use The EMS machine setting tool allows for effortless installation, particularly in the case of series installations The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety Fixing point at hef 25 mm prevents anchor of falling out of the drill hole before being expanded The black fixing point prevents the anchor from falling out of the drill hole during overhead installation Suitable for The EA II is suitable for pre-positioned installation Position the hammerset anchor in the drill hole and drive in flush to the surface of the anchor base using the hammer The sleeve is then expanded by driving in the internal bolt with the EHS Plus setting tool (alternative: EMS machine setting tool), and expanded against the drill hole wall The setting tools must sit on the rim of the anchor to ensure correct expansion Building materials Approved for: Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Pipelines and ventilation ducts Sprinkler systems Cable conduits and wires Gratings Steel constructions Machines Consoles Shuttering props ds: dsc: kts: weft anchor stainless steel kpn: EA II M8x40 A4 kpn_dash: kpn_clear: EAIIM8x40A4 bkpn: FISCHER EA II M8x40 A4 bkpn_clear: FISCHER EAIIM8x40A4 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 48412 sr_ns: FISCHER48412
r: 02019390 p: 4.22 pid: 9988 b: FISCHER q: 0 st: lt: 8 ean: 4006209902653 sr: FISCHER 90265 sr_no_br: 90265 sr_no_br_cl: 90265 sr_cl: FISCHER90265 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Overall length 84 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 12 mm n: FISCHER TA M 8 BP sleeve anchor with break-off head zinc plated - 90265 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The installation-friendly push-through anchor with twist-off head for fixings in non-cracked concrete. The fischer heavy-duty anchor TA M-T BP is a push-through anchor for time-saving through-type installation made of zinc-plated steel. During installation the cone is pulled into the expansion sleeve and expands it against the hole wall. The hex driver is applied for as long as is required for the cone to be broken off in a controlled manner. The heavy-duty anchor is ideal for fixing objects that are vulnerable to theft such as benches or bicycle racks in public areas, or for protective grilles. Simple assembly due to low setting energy Low axial and edge distances due to uniform load introduction Attachment is protected against break-ins and theft The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M-T is extremely flexible The TA M-BP version with twist-off head hinders the dismantling of the fixture for use as a theft-deterrent and break-in protection The detachable screw connection allows for surface flush removal Suitable for The TA M-T is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The hexagonal head of the TA M-BP is tightened until it breaks off Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Handrails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: sleeve anchor with break-off head zinc plated kpn: TA M 8 BP kpn_dash: kpn_clear: TAM8BP bkpn: FISCHER TA M 8 BP bkpn_clear: FISCHER TAM8BP c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 90265 sr_ns: FISCHER90265
r: 87051375 p: 4.1 pid: 176377 b: FISCHER q: 0 st: lt: 8 ean: 4006209448878 sr: FISCHER 44887 sr_no_br: 44887 sr_no_br_cl: 44887 sr_cl: FISCHER44887 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Drilling diameter 15 mm Overall length 107 mm Material Steel Surface treatment Electrogalvanised Quantiy per pack 25 n: FISCHER 44887 Safety anchor FH II 15/10 with hexagonal head zinc plated cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description Strong, safe and stylish anchoring with hexagonal head The approvals guarantee maximum safety and performance, even for applications in earthquake zones (seismic C1 and C2). The relatively flat head of the bolt makes the anchor very discreet. The design between the bolt and the anchor sleeve ensures a high absorbable shear force. Fewer fastening points are therefore required. The optimised geometry reduces the energy required for assembly. The approval also includes the use of hollow drills. The plastic ring prevents the anchor from rotating with it during assembly and thus guarantees correct dispersion. The well-known FH II geometry minimises the installation energy required to a few hammer blows and thus guarantees the highest ease of installation. The fischer Safety anchor FH II S with hexagonal head is a sleeve anchor made of galvanised steel. The anchor is inserted in the time-saving push-through assembly. When tightening the anchor, the cone is pulled into the spreader sleeve and tightens against the wall of the drilled hole. The black plastic ring prevents the anchor from turning with it and absorbs the tightening slip. As a result, the mounting piece is pulled against the anchoring ground. The fischer Safety anchor FH II S with hexagonal head is particularly suitable for fixing brackets, steel constructions and cable ducts in cracked and uncracked concrete. Applications Handrails Stairs Brackets Steel constructions Ladders Cable trays Machinery Fencing Facade systems Railing Building materials Approved for: Concrete C20/25 to C50/60, cracked and uncracked Also suitable for: Concrete C12/15 High-density natural stone ds: dsc: kts: Safety anchor FH II 15/10 with hexagonal head zinc plated kpn: 44887 kpn_dash: kpn_clear: 44887 bkpn: FISCHER 44887 bkpn_clear: FISCHER 44887 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 44887 sr_ns: FISCHER44887
r: 02832945 p: 4.03 pid: 175990 b: FISCHER q: 0 st: lt: 11 ean: 4006209784174 sr: FISCHER 78417 sr_no_br: 78417 sr_no_br_cl: 78417 sr_cl: FISCHER78417 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 78417 aerated concrete anchor FTP M10 metal cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The metal anchor for metric screws for aerated concrete. The fischer turbo Aircrete anchor FTP M is a special fixing for fixings in aerated concrete. The metal anchor is inserted into the drill hole in the pre-positioned installation using an Allen key. The spiral external thread cuts a mechanical interlock in the building material. The fischer turbo Aircrete anchor FTP M is ideally suited to securely fix mirror cabinets, radiators, and TV consoles to aerated concrete. No setting tool necessary High retention forces due to interlocking in building materials Convenient assembly: reduced wear and tear Low axial and edge distances due to expansion pressure-free anchoring The Allen key chuck makes it possible to set the FTP M without the need for a special setting tool. This allows for a simple installation The FTP M achieves a very high load-bearing capacity in aerated concrete for increased safety The spiral-shaped outer thread taps itself into the aerated concrete with a positive fit. This means that it can be set without the need for much force The special geometry allows for an almost expansion-force-free anchoring. This allows for small edge and spacing distances, and avoids splitting in the case of plastered surfaces Suitable for The FTP M is suitable for pre-positioned installation The aircrete anchor taps itself into the aircrete with a positive fit during the installation process Suitable for metric screws with diameter 6 to 10 mm For installation with a hexagon socket: Size of the hexagon socket corresponds to screw diameter, e. g. FTP M6 is installed with hexagon socket size 6 For installation with cordless screwdriver: use a low torque and use the correct 6-kt bit FTP EM Building materials Aerated concrete Solid panel made from gypsum Application Pictures Lighting Shelves Mirror cabinets Curtain rails Cable and pipe clips Stand-off installations Radiators TV consoles ds: dsc: kts: aerated concrete anchor FTP M10 metal kpn: 78417 kpn_dash: kpn_clear: 78417 bkpn: FISCHER 78417 bkpn_clear: FISCHER 78417 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 78417 sr_ns: FISCHER78417
r: 08134138 p: 3.95 pid: 176359 b: FISCHER q: 0 st: lt: 8 ean: 4048962396119 sr: FISCHER 554925 sr_no_br: 554925 sr_no_br_cl: 554925 sr_cl: FISCHER554925 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 15 mm Overall length 86,4 mm Material Steel Surface treatment Zinc plated n: FISCHER 554925 shear anchor FH II 15/80 EN SCD cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The moment-controlled shear anchor for maximum safety. Perfect form closure of the anchor in ribbed or hollow-core slab floors With extra-large washer for almost all shoring feet Visual check after assembly by green signal element Can be installed with an impact spanner and does not need to be checked with a torque wrench The torque-controlled washer guarantees correct installation torque for easy and safe assembly The mechanical and visual check of the FH II NL SCD allows installation without a torque spanner. The use of an impact spanner allows quick and user-friendly mounting. Both assembly and disassembly of the FH II NL SCD can be carried out with one cap size. The fischer cantilever anchor FH II NL SCD has been specially developed for fixing braces on hollow-core slabs and ribbed floors. Bracing on concrete walls requires secure anchoring. When mounted, the cone is pulled into the spreader sleeve, which then clamps against the borehole wall. The black crumple zone prevents the Bracing Anchor from rotating along and absorbs the tightening slip. The black plastic ring prevents the anchor from being tightened beyond the maximum torque. The green signal element becomes visible as soon as the correct torque is achieved. This visual check therefore indicates that the anchor has been correctly assembled and provides security and safety on the construction site. After dismantling, no protruding parts remain in the borehole, reducing the risk of accidents. Applications Braces Building materials Suitable for: Ductile slabs C40/50 Ribbed concrete slabs C40/50 Solid concrete >= C20/25 ds: dsc: kts: shear anchor FH II 15/80 EN SCD kpn: 554925 kpn_dash: kpn_clear: 554925 bkpn: FISCHER 554925 bkpn_clear: FISCHER 554925 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 554925 sr_ns: FISCHER554925
r: 02779430 p: 3.45 pid: 21082 b: FISCHER q: 0 st: lt: 10 ean: 4048962244809 sr: FISCHER 535852 sr_no_br: 535852 sr_no_br_cl: 535852 sr_cl: FISCHER535852 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 12 mm Overall length 88 mm Safety anchor No Drilling diameter 18 mm n: FISCHER FH II 18/75-M12 channel plate anchor zinc-plated - 535852 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description Economisch systeem, de bout kan tot vijf maal herbruikt worden Geen uitstekende ankerdelen na demontage van het anker. Dit heeft een hogere veiligheid op de bouwplaats en tijdbesparing tot gevolg Gangbare zeskantbout welke ook wordt gebruikt voor andere applicaties, hierdoor hoeft er niet van montagegereedschap te worden gewisseld Grote onderlegring voor een betere krachtenafdracht Suitable for Ankerbout bestaande uit een bout (staalkwaliteit 8. 8) en vervangingsset (onderlegring, nylon ring, kreukelzone, spreidhulsen onderconus) Uitstekend Suitable for tijdelijke bevestiging van betonwanden middels schoren, maar ook voor permanente Application Na demontage blijven de onderconus en spreidhuls achter in het boorgat, deze onderdelen kunnen tezamen met de spreidhuls, nylon ring en onderlegring nabesteld worden Kleinste afmeting tevens Suitable for de bevestiging van F-beugels in kanaalplaatvloeren Building materials Suitable for: Cavity floor slabs C40/50 Application Diagonal props Panels made of concrete ds: dsc: kts: channel plate anchor zinc-plated kpn: FH II 18/75-M12 kpn_dash: FH II 18/75 kpn_clear: FHII1875M12 bkpn: FISCHER FH II 18/75-M12 bkpn_clear: FISCHER FHII1875M12 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 535852 sr_ns: FISCHER535852
r: 02019264 p: 3.25 pid: 10570 b: FISCHER q: 0 st: lt: 8 ean: 4006209902523 sr: FISCHER 90252 sr_no_br: 90252 sr_no_br_cl: 90252 sr_cl: FISCHER90252 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 12 mm Overall length 86 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 18 mm n: FISCHER TA M12 S/25 sleeve anchor with bolt electrolytically galvanised - 90252 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The installation-friendly internal thread anchor with screw for fixings in non-cracked concrete. The fischer heavy-duty anchor TA M-S is an internal threaded anchor for pre-positioned installation made of zinc-plated steel. During installation the cone is pulled into the expansion sleeve and expands it against the hole wall. The plastic cover protects the thread from dirt. This ensures that it remains functional. The heavy-duty anchor is ideal for fixing fall protection devices, systems, and machines in non-cracked concrete. Simple assembly due to low setting energy Low axial and edge distances due to uniform load introduction Surface flush installation due to detachable screw connections ETA approval for non-cracked concrete The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M is extremely flexible The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use The red plastic cap protects against soiling and thus ensures free-running of the thread Suitable for The TAM is suitable for pre-positioned installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall For correct installation, it must be ensured that the pre-positioned anchor TA M can be supported on the attachment, or that the threaded rod is countered Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Handrails Consoles Ladders Cable trays Machines Staircases Gates Façades Stand-off installations ds: dsc: kts: sleeve anchor with bolt electrolytically galvanised kpn: TA M12 S/25 kpn_dash: kpn_clear: TAM12S25 bkpn: FISCHER TA M12 S/25 bkpn_clear: FISCHER TAM12S25 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 90252 sr_ns: FISCHER90252
r: 87993213 p: 3.11 pid: 176395 b: FISCHER q: 125 st: 1 lt: 1 ean: 4006209784167 sr: FISCHER 78416 sr_no_br: 78416 sr_no_br_cl: 78416 sr_cl: FISCHER78416 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 78416 aerated concrete anchor FTP M8 metal cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The metal anchor for metric screws for aerated concrete. The fischer turbo Aircrete anchor FTP M is a special fixing for fixings in aerated concrete. The metal anchor is inserted into the drill hole in the pre-positioned installation using an Allen key. The spiral external thread cuts a mechanical interlock in the building material. The fischer turbo Aircrete anchor FTP M is ideally suited to securely fix mirror cabinets, radiators, and TV consoles to aerated concrete. No setting tool necessary High retention forces due to interlocking in building materials Convenient assembly: reduced wear and tear Low axial and edge distances due to expansion pressure-free anchoring The Allen key chuck makes it possible to set the FTP M without the need for a special setting tool. This allows for a simple installation The FTP M achieves a very high load-bearing capacity in aerated concrete for increased safety The spiral-shaped outer thread taps itself into the aerated concrete with a positive fit. This means that it can be set without the need for much force The special geometry allows for an almost expansion-force-free anchoring. This allows for small edge and spacing distances, and avoids splitting in the case of plastered surfaces Suitable for The FTP M is suitable for pre-positioned installation The aircrete anchor taps itself into the aircrete with a positive fit during the installation process Suitable for metric screws with diameter 6 to 10 mm For installation with a hexagon socket: Size of the hexagon socket corresponds to screw diameter, e. g. FTP M6 is installed with hexagon socket size 6 For installation with cordless screwdriver: use a low torque and use the correct 6-kt bit FTP EM Building materials Aerated concrete Solid panel made from gypsum Application Pictures Lighting Shelves Mirror cabinets Curtain rails Cable and pipe clips Stand-off installations Radiators TV consoles ds: dsc: kts: aerated concrete anchor FTP M8 metal kpn: 78416 kpn_dash: kpn_clear: 78416 bkpn: FISCHER 78416 bkpn_clear: FISCHER 78416 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 78416 sr_ns: FISCHER78416
r: 87051371 p: 2.96 pid: 176417 b: FISCHER q: 0 st: lt: 8 ean: 4006209448847 sr: FISCHER 44884 sr_no_br: 44884 sr_no_br_cl: 44884 sr_cl: FISCHER44884 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Drilling diameter 12 mm Overall length 90 mm Material Steel Surface treatment Electrogalvanised Safety anchor Yes Quantiy per pack 50 n: FISCHER 44884 Safety anchor FH II 12/10 with hexagonal head electrolytically galvanised cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description Strong, safe and stylish anchor with hexagonal head International approvals guarantee maximum safety and best performance. The European technical assessment even covers use in earthquake zones (seismic C1 and C2). The relatively flat head of the bolt makes the anchor very discreet. The design between the bolt and the anchor sleeve ensures a high absorbable shear force. Fewer fastening points are therefore required. The optimised geometry reduces the energy required for assembly. The approvals also include the use of hollow drills. The approvals guarantee maximum safety and maximum performance. Also for applications in earthquake zones (seismic C1 and C2). The plastic ring prevents the anchor from rotating during assembly and thus guarantees correct dispersion. The well-known FH II geometry minimises the installation energy required to just a few hammer blows and thus guarantees highest installation convenience. The fischer Safety anchor FH II S with hexagonal head is a sleeve anchor made of galvanised steel. The anchor is inserted in the time-saving push-through assembly. When tightening the anchor, the cone is pulled into the spreader sleeve and tightens against the wall of the drilled hole. The black plastic ring prevents the anchor from turning with it and absorbs the tightening slip. As a result, the mounting piece is pulled against the anchoring ground. The fischer Safety anchor FH II S with hexagonal head is particularly suitable for fixing brackets, steel constructions and cable ducts in cracked and uncracked concrete. Applications Handrails Stairs Brackets Steel constructions Ladders Cable trays Machinery Fencing Facade systems Railing Building materials Approved for: Concrete C20/25 to C50/60, cracked and uncracked Also suitable for: Concrete C12/15 High-density natural stone ds: dsc: kts: Safety anchor FH II 12/10 with hexagonal head electrolytically galvanised kpn: 44884 kpn_dash: kpn_clear: 44884 bkpn: FISCHER 44884 bkpn_clear: FISCHER 44884 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 44884 sr_ns: FISCHER44884
r: 02019424 p: 2.89 pid: 10626 b: FISCHER q: 0 st: lt: 8 ean: 4006209484104 sr: FISCHER 48410 sr_no_br: 48410 sr_no_br_cl: 48410 sr_cl: FISCHER48410 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 6 mm Drilling diameter 8 mm Overall length 30 mm n: FISCHER EA II M6x30 A4 weft anchor stainless steel - 48410 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The internally threaded anchor made of stainless steel with a rim for simple Hammerset installation. The fischer Hammerset anchor EA II R is an internal threaded anchor made of stainless steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EHS Plus or the machine setting tool EMS the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer Hammerset anchor EA II R is ideal for fixing steel constructions and formwork props in external areas with approval. Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve Use of standard metric screws and threaded rods lowers complexity Power-saving series installation with machine setting tool EA II S-SDS ETA approval for non-cracked concrete and multiple fixings Made of stainless steel for fixings used outside The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use The EMS machine setting tool allows for effortless installation, particularly in the case of series installations The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety Fixing point at hef 25 mm prevents anchor of falling out of the drill hole before being expanded The black fixing point prevents the anchor from falling out of the drill hole during overhead installation Suitable for The EA II is suitable for pre-positioned installation Position the hammerset anchor in the drill hole and drive in flush to the surface of the anchor base using the hammer The sleeve is then expanded by driving in the internal bolt with the EHS Plus setting tool (alternative: EMS machine setting tool), and expanded against the drill hole wall The setting tools must sit on the rim of the anchor to ensure correct expansion Building materials Approved for: Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Pipelines and ventilation ducts Sprinkler systems Cable conduits and wires Gratings Steel constructions Machines Consoles Shuttering props ds: dsc: kts: weft anchor stainless steel kpn: EA II M6x30 A4 kpn_dash: kpn_clear: EAIIM6x30A4 bkpn: FISCHER EA II M6x30 A4 bkpn_clear: FISCHER EAIIM6x30A4 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 48410 sr_ns: FISCHER48410
r: 02377387 p: 2.88 pid: 176190 b: FISCHER q: 0 st: lt: 8 ean: 4048962158380 sr: FISCHER 519024 sr_no_br: 519024 sr_no_br_cl: 519024 sr_cl: FISCHER519024 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 519024 aerated concrete anchor FPX-I M12 electrolytically galvanised steel cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The strong internal thread anchor with unique four-way expansion for fixings in aerated concrete. The fischer Aircrete anchor FPX-I is made of zinc-plated steel. After pre-drilling, the FPX-I is only driven in with the hammer. It is not necessary to clean the drill hole. The fischer Aircrete anchor is applied with a hex driver via a cordless screwdriver or via a ratchet. The cone is then pulled into the expansion sleeve. In this case the four wings create an undercut in the drill hole. After expansion, the hex socket is automatically released. The fischer Aircrete anchor FPX-I is ideally suited for fixing suspended ceilings, railings or kitchen cabinets in aerated concrete. The first approved metal anchor for aerated concrete High load capacity: Expanding wings create undercut. This saves on fixing points Simple and power-saving installation without an additional setting tool No rotation of the anchor Automatic setting control ensures maximum safety The FPX-I enables easy tightening via the hexagon wrench using a cordless screwdriver or ratchet and therefore offers top installation comfort The deformation-controlled expansion of the anchor with the hexagon wrench ensures safe, even and gentle installation The unique 4-way expansion of the FPX-I with a square expansion sleeve prevents the rotation of the anchor in the drill hole and ensures high tension and shear loads, which means fewer fixing points The releasing of the hexagonal wrench guarantees an automatical setting control for each installation process The first steel anchor with an ETA-Approval and fire protection certificate for fixings in aerated concrete enables use for safety-relevant fixings, too Suitable for The FPX-I with internal thread is suitable for pre-positioned installation Pre-drilling enables easy hammering in, even in high-strength aerated concrete. There is no need to clean the drill hole When the anchor is tightened with the hexagon wrench, the internal thread sleeve starts to rotate and the cone is pulled into the square expansion sleeve. The aerated concrete is compressed on the four sides and generates an undercut in the drill hole When reached the optimum expansion, the hexagon wrench is released automatically from the anchor Building materials Approved for: Aerated concrete with compressive strength 2 to 7 N/mm² Aerated concrete wall or ceiling boards with compressive strength 3. 3 to 4. 4 N/mm² Planked aerated concrete masonry, e. g. plastered, tiled, papered etc Application Suspended ceilings Cable trays Pipelines Ventilation ducts Guard rails/hand rails TV consoles Kitchen cupboards Stand-off installations ds: dsc: kts: aerated concrete anchor FPX-I M12 electrolytically galvanised steel kpn: 519024 kpn_dash: kpn_clear: 519024 bkpn: FISCHER 519024 bkpn_clear: FISCHER 519024 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 519024 sr_ns: FISCHER519024
r: 02639425 p: 2.78 pid: 176207 b: FISCHER q: 0 st: lt: 4 ean: 4048962158373 sr: FISCHER 519023 sr_no_br: 519023 sr_no_br_cl: 519023 sr_cl: FISCHER519023 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 519023 aerated concrete anchor FPX-I M10 electrolytically galvanised steel cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The strong internal thread anchor with unique four-way expansion for fixings in aerated concrete. The fischer Aircrete anchor FPX-I is made of zinc-plated steel. After pre-drilling, the FPX-I is only driven in with the hammer. It is not necessary to clean the drill hole. The fischer Aircrete anchor is applied with a hex driver via a cordless screwdriver or via a ratchet. The cone is then pulled into the expansion sleeve. In this case the four wings create an undercut in the drill hole. After expansion, the hex socket is automatically released. The fischer Aircrete anchor FPX-I is ideally suited for fixing suspended ceilings, railings or kitchen cabinets in aerated concrete. The first approved metal anchor for aerated concrete High load capacity: Expanding wings create undercut. This saves on fixing points Simple and power-saving installation without an additional setting tool No rotation of the anchor Automatic setting control ensures maximum safety The FPX-I enables easy tightening via the hexagon wrench using a cordless screwdriver or ratchet and therefore offers top installation comfort The deformation-controlled expansion of the anchor with the hexagon wrench ensures safe, even and gentle installation The unique 4-way expansion of the FPX-I with a square expansion sleeve prevents the rotation of the anchor in the drill hole and ensures high tension and shear loads, which means fewer fixing points The releasing of the hexagonal wrench guarantees an automatical setting control for each installation process The first steel anchor with an ETA-Approval and fire protection certificate for fixings in aerated concrete enables use for safety-relevant fixings, too Suitable for The FPX-I with internal thread is suitable for pre-positioned installation Pre-drilling enables easy hammering in, even in high-strength aerated concrete. There is no need to clean the drill hole When the anchor is tightened with the hexagon wrench, the internal thread sleeve starts to rotate and the cone is pulled into the square expansion sleeve. The aerated concrete is compressed on the four sides and generates an undercut in the drill hole When reached the optimum expansion, the hexagon wrench is released automatically from the anchor Building materials Approved for: Aerated concrete with compressive strength 2 to 7 N/mm² Aerated concrete wall or ceiling boards with compressive strength 3. 3 to 4. 4 N/mm² Planked aerated concrete masonry, e. g. plastered, tiled, papered etc Application Suspended ceilings Cable trays Pipelines Ventilation ducts Guard rails/hand rails TV consoles Kitchen cupboards Stand-off installations ds: dsc: kts: aerated concrete anchor FPX-I M10 electrolytically galvanised steel kpn: 519023 kpn_dash: kpn_clear: 519023 bkpn: FISCHER 519023 bkpn_clear: FISCHER 519023 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 519023 sr_ns: FISCHER519023
r: 02381020 p: 2.68 pid: 176186 b: FISCHER q: 0 st: lt: 4 ean: 4048962158366 sr: FISCHER 519022 sr_no_br: 519022 sr_no_br_cl: 519022 sr_cl: FISCHER519022 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 519022 aerated concrete anchor FPX-I M8 electrolytically galvanised steel cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The strong internal thread anchor with unique four-way expansion for fixings in aerated concrete. The fischer Aircrete anchor FPX-I is made of zinc-plated steel. After pre-drilling, the FPX-I is only driven in with the hammer. It is not necessary to clean the drill hole. The fischer Aircrete anchor is applied with a hex driver via a cordless screwdriver or via a ratchet. The cone is then pulled into the expansion sleeve. In this case the four wings create an undercut in the drill hole. After expansion, the hex socket is automatically released. The fischer Aircrete anchor FPX-I is ideally suited for fixing suspended ceilings, railings or kitchen cabinets in aerated concrete. The first approved metal anchor for aerated concrete High load capacity: Expanding wings create undercut. This saves on fixing points Simple and power-saving installation without an additional setting tool No rotation of the anchor Automatic setting control ensures maximum safety The FPX-I enables easy tightening via the hexagon wrench using a cordless screwdriver or ratchet and therefore offers top installation comfort The deformation-controlled expansion of the anchor with the hexagon wrench ensures safe, even and gentle installation The unique 4-way expansion of the FPX-I with a square expansion sleeve prevents the rotation of the anchor in the drill hole and ensures high tension and shear loads, which means fewer fixing points The releasing of the hexagonal wrench guarantees an automatical setting control for each installation process The first steel anchor with an ETA-Approval and fire protection certificate for fixings in aerated concrete enables use for safety-relevant fixings, too Suitable for The FPX-I with internal thread is suitable for pre-positioned installation Pre-drilling enables easy hammering in, even in high-strength aerated concrete. There is no need to clean the drill hole When the anchor is tightened with the hexagon wrench, the internal thread sleeve starts to rotate and the cone is pulled into the square expansion sleeve. The aerated concrete is compressed on the four sides and generates an undercut in the drill hole When reached the optimum expansion, the hexagon wrench is released automatically from the anchor Building materials Approved for: Aerated concrete with compressive strength 2 to 7 N/mm² Aerated concrete wall or ceiling boards with compressive strength 3. 3 to 4. 4 N/mm² Planked aerated concrete masonry, e. g. plastered, tiled, papered etc Application Suspended ceilings Cable trays Pipelines Ventilation ducts Guard rails/hand rails TV consoles Kitchen cupboards Stand-off installations ds: dsc: kts: aerated concrete anchor FPX-I M8 electrolytically galvanised steel kpn: 519022 kpn_dash: kpn_clear: 519022 bkpn: FISCHER 519022 bkpn_clear: FISCHER 519022 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 519022 sr_ns: FISCHER519022
r: 87051348 p: 2.61 pid: 16035 b: FISCHER q: 0 st: lt: 8 ean: 4048962016819 sr: FISCHER 503141 sr_no_br: 503141 sr_no_br_cl: 503141 sr_cl: FISCHER503141 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 6 mm Overall length 115 mm Material Steel Surface treatment Zinc plated Safety anchor Yes Drilling diameter 10 mm n: FISCHER FH II 10/50 H safety anchor with cap nut zinc plated - 503141 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with cover nut and sophisticated design in cracked concrete. The fischer high-performance anchor FH II H with cover nut is a sleeve anchor made of zinc-plated steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorbs the torque slippage. This means that the fixture is pulled towards the anchoring base. The fischer high-performance anchor FH II H with cover nut is ideally suited to fix steel constructions, machines, and gates in cracked and non-cracked concrete. With cover nut The international approvals guarantee maximum safety and maximum performance. Also for applications in earthquake regions (seismic C1 and C2) The ideal combination of screw shank and sleeve enables a high transverse load capacity and fewer fixing points The optimised geometry intelligently reduces the setting energy and thus ensures a force-saving assembly The international approvals guarantee maximum safety and the best performance. The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2) The protruding head for stable and robust fixings The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required The optimised geometry intelligently reduces the energy required for assembly The approval regulates the use of hollow drills Suitable for The FH II is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The black plastic ring prevents rotation when tightening the anchor, and acts as a crumple zone to take the torque slippage so that the fixture is pulled onto the anchor base Available head shapes for flexible design solutions:Countersunk head (type SK), hexagon head (type S), bolt version with nut and washer (type B) and cap nut (type H) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Guard rails Staircases Consoles Steel constructions Ladders Cable trays Machines Gates Façades Gratings ds: dsc: kts: safety anchor with cap nut zinc plated kpn: FH II 10/50 H kpn_dash: kpn_clear: FHII1050H bkpn: FISCHER FH II 10/50 H bkpn_clear: FISCHER FHII1050H c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 503141 sr_ns: FISCHER503141
r: 87990164 p: 2.59 pid: 176388 b: FISCHER q: 0 st: lt: 5 ean: 4006209784150 sr: FISCHER 78415 sr_no_br: 78415 sr_no_br_cl: 78415 sr_cl: FISCHER78415 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 78415 aerated concrete anchor FTP M6 metal cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The metal anchor for metric screws for aerated concrete. The fischer turbo Aircrete anchor FTP M is a special fixing for fixings in aerated concrete. The metal anchor is inserted into the drill hole in the pre-positioned installation using an Allen key. The spiral external thread cuts a mechanical interlock in the building material. The fischer turbo Aircrete anchor FTP M is ideally suited to securely fix mirror cabinets, radiators, and TV consoles to aerated concrete. No setting tool necessary High retention forces due to interlocking in building materials Convenient assembly: reduced wear and tear Low axial and edge distances due to expansion pressure-free anchoring The Allen key chuck makes it possible to set the FTP M without the need for a special setting tool. This allows for a simple installation The FTP M achieves a very high load-bearing capacity in aerated concrete for increased safety The spiral-shaped outer thread taps itself into the aerated concrete with a positive fit. This means that it can be set without the need for much force The special geometry allows for an almost expansion-force-free anchoring. This allows for small edge and spacing distances, and avoids splitting in the case of plastered surfaces Suitable for The FTP M is suitable for pre-positioned installation The aircrete anchor taps itself into the aircrete with a positive fit during the installation process Suitable for metric screws with diameter 6 to 10 mm For installation with a hexagon socket: Size of the hexagon socket corresponds to screw diameter, e. g. FTP M6 is installed with hexagon socket size 6 For installation with cordless screwdriver: use a low torque and use the correct 6-kt bit FTP EM Building materials Aerated concrete Solid panel made from gypsum Application Pictures Lighting Shelves Mirror cabinets Curtain rails Cable and pipe clips Stand-off installations Radiators TV consoles ds: dsc: kts: aerated concrete anchor FTP M6 metal kpn: 78415 kpn_dash: kpn_clear: 78415 bkpn: FISCHER 78415 bkpn_clear: FISCHER 78415 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 78415 sr_ns: FISCHER78415
