r: 02776772 p: 3.42 pid: 44623 b: FISCHER q: 0 st: lt: 13 ean: 4048962251517 sr: FISCHER 536868 sr_no_br: 536868 sr_no_br_cl: 536868 sr_cl: FISCHER536868 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 12 mm Max. useful length 205 mm Length 260 mm n: FISCHER 536868 concrete screw FBS II 10x260 205/195/175 hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 10x260 205/195/175 hexagon head kpn: 536868 kpn_dash: kpn_clear: 536868 bkpn: FISCHER 536868 bkpn_clear: FISCHER 536868 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536868 sr_ns: FISCHER536868
r: 87050185 p: 3.41 pid: 176427 b: FISCHER q: 0 st: lt: 8 ean: 4006209502860 sr: FISCHER 50286 sr_no_br: 50286 sr_no_br_cl: 50286 sr_cl: FISCHER50286 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 14 mm Length 170 mm n: FISCHER 50286 anchor rod RG M14 x 170 electrolytically zinc-plated 5.8 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The proven rod anchor for internal use with a mortar cartridge or injection mortar. The fischer threaded rod RG M is made from zinc-plated, steel grade 5. 8. The threaded rod is a system accessory for the fischer mortar capsule RM II or the fischer injection mortar FIS EM. For single fixings, the application with the pre-portioned mortar capsule is particularly cost-effective. When installing with the mortar capsule, set the fischer threaded rod RG M with rotating and hitting motions with a hammer drill. When installing with the mortar capsule, set the fischer threaded rod RG M with rotating and hitting motions with a hammer drill. When installing with the injection mortar, the threaded rod is pushed by hand into the drill hole with slight turning motions. The system is particularly suitable for the cost-effective fixing of machines, steelwork constructions, and column bases inside. Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various mortar cartridges or injection mortars Anchor rod with oblique edge and hexagon for simple installation with pre-portioned injection cartridge Zinc-galvanised steel for internal use The wide range of the RG M from M8 to M30 opens up a wide range of applications and therefore offers great flexibility The wide range of approved steel types for RG M allows for use in all corrosion resistance classes and offers the best possible application safety Please refer to the approvals for the resin capsules and mortar used Suitable for Due to its oblique edge, the anchor rod RG M is particularly suitable for use in conjunction with resin capsules The anchor rod RG M is set using a hammer drill and the accompanying setting tool in rotating and hitting motions During setting, the oblique edge of the RG M destroys the capsule, and mixes and activates the mortar Use with injection mortar is also possible. Here, the anchor rod is manually inserted into the drill hole with a light rotating movement until it reaches the base of the hole Building materials In connection with the fischer resin capsules approved or suitable for cracked and non-cracked concrete In connection with several fischer injection mortars approved or suitable for different building materials Application Anchorings with resin capsule RSB and RSB mini Anchorings with resin capsule RM II Anchorings with each of the fischer injection mortars FIS SB, FIS EM, FIS EB II, FIS V, FIS VL, FIS V Zero, FIS P Plus, FIS P, FIS EP and FIS Green ds: dsc: kts: anchor rod RG M14 x 170 electrolytically zinc-plated 5.8 kpn: 50286 kpn_dash: kpn_clear: 50286 bkpn: FISCHER 50286 bkpn_clear: FISCHER 50286 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 50286 sr_ns: FISCHER50286
r: 08096960 p: 3.4 pid: 176357 b: FISCHER q: 0 st: lt: 8 ean: 4048962462371 sr: FISCHER 564612 sr_no_br: 564612 sr_no_br_cl: 564612 sr_cl: FISCHER564612 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 10 mm Overall length 95 mm Material (bolt) Stainless steel Surface treatment (bolt) None Thread designation M10 n: FISCHER 564612 Piercing anchor FAZ II Plus 10/10 R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 10/10 R stainless steel kpn: 564612 kpn_dash: kpn_clear: 564612 bkpn: FISCHER 564612 bkpn_clear: FISCHER 564612 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564612 sr_ns: FISCHER564612
r: 08134128 p: 3.32 pid: 176361 b: FISCHER q: 0 st: lt: 8 ean: sr: FISCHER 537264 sr_no_br: 537264 sr_no_br_cl: 537264 sr_cl: FISCHER537264 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 10 mm Length (Wall plug) 50 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Cavity wall plug With screw Yes With collar Yes Application General n: FISCHER 537264 Hollow wall plug DuoTec 10 RH with round hook (2 pcs) cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description User-friendly nylon hollow wall plug for high loads in all sheet material types Combination of two material components for improved performance. Equipped with matching round hook. The recessed sleeve reinforces the drill hole and allows significantly higher transverse loads. Curved pull band allows detection of obstacles behind the plate before mounting. Flexible screw mounting allows the use of screws and hooks with different thread shapes. Glass fibre-reinforced plastics and a metal skeleton insert ensure high tensile and transverse loads in all sheet material types. The grey, soft nylon contact surface distributes the load over the panel surface, preventing weakening of the supporting building material. Standard borehole diameters and a compact tilt anchor ensure easy installation in narrow cavities, even in the presence of insulation. The white recessed sleeve with click function allows quick and safe pre-installation in the drilled hole. Equipped with a length indicator on the tension band for determining the required screw length (scale value + 20 mm). Thanks to the unique operation and geometry of the toggle, the DuoTec, as a gravity plug, can take exceptionally high loads. In applications with multiple fastening points, this allows the number of fasteners required to be reduced while maximising safety. As part of the DUO line, the DuoTec consists of two plastic components: the red, hard part of the plug sleeve ensures even load distribution. The grey, soft part prevents damage to the plate surface by the attachment and thus reduces the point load. The DuoTec is installed as a gravity plug in sheet material, but is also suitable as a spreading plug in solid building materials. Applications Suspended kitchen cupboards Living room cabinets Shelves Cloakroom cabinets Handrails Photos Mirrors Lamps Heavy hanging baskets Building materials Suitable for: Plasterboard Gypsum fibreboard Wooden panels, such as OSB boards, chipboard, MDF boards Steel plates Plastic boards Hollow concrete blocks Also works in: Solid materials, such as concrete and wood ds: dsc: Scope of delivery (per purchase of 5) 2x DuoTec 10 2x Round hook 5.0x 84 kts: Hollow wall plug DuoTec 10 RH with round hook (2 pcs) kpn: 537264 kpn_dash: kpn_clear: 537264 bkpn: FISCHER 537264 bkpn_clear: FISCHER 537264 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 537264 sr_ns: FISCHER537264
r: 02827242 p: 3.29 pid: 175995 b: FISCHER q: 0 st: lt: 8 ean: 4048962271812 sr: FISCHER 539802 sr_no_br: 539802 sr_no_br_cl: 539802 sr_cl: FISCHER539802 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: For diameter 20/22 mm Principal hazard property GHS09 Environmental hazard Flash point > 100 °C ADR class UN number ADR packing group EUH-statements EUH208 Conseils de prudence (P) P280 H-statements H411 Hazard class GHS09 Environmental hazard Physical state Solid n: FISCHER 539802 chemical anchor capsule RM II 20 / 22 cn: CHEMICAL ANCHOR cn2: CHEMICAL ANCHOR cn_clear: CHEMICALANCHOR d: Product description The bonded anchor for cracked concrete without drill hole cleaning The fischer resin capsule RM II together with the threaded rod RG M is the first capsule with European Technical Assessment Option 1 for cracked concrete, which does not require hole cleaning. Steel constructions, machines or staircases outside and indoors can be fixed with the resin anchor. The resin capsule can be used with the fischer threaded rod RG M and the fischer internal threaded anchor RG MI. Hole cleaning is not necessary with the resin capsule RM II, however comparatively high loads can be supported. This allows for a fast work progress. Resin capsule for fixings in cracked concrete Fast processing without drill hole cleaning Secure anchorage of high loads Ideal for single point fixings and overhead installations Numerous threaded rods available as accessories RM II is the first bonded anchor with threaded rod RG M or internal-threaded anchor RG M I that does not need drill hole cleaning. This allows fast progress and efficient installation In addition, the construction site is less affected by drill dust. This increases safety for the user The pre-portioned resin capsule is easy to use and particularly suitable for individual applications and overhead installations Use of the internal threaded anchor RG MI allows the surface-flush removal and reuse of the fixing point, and therefore offers the best possible flexibility Suitable for The resin capsule RM II in conjunction with the threaded rod RG M or internal-threaded anchor RG MI is suitable for pre-positioned installation The 2-component resin capsule RM II contains styrene-free vinylester resin and hardener The fixing element is set using a hammer drill and the accompanying setting tool in rotating and hitting motions During setting, the oblique edge of the fixing element destroys the capsule, and mixes and activates the mortar The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Natural stone with dense structure Application Suitable for: Steel constructions Guard rails Staircases Column bases Machines Masts Removable fixings Temporary fixings, e. g. for machines Scaffold anchoring Approved for: Overhead installations Water-filled drill holes ds: dsc: kts: chemical anchor capsule RM II 20 / 22 kpn: 539802 kpn_dash: kpn_clear: 539802 bkpn: FISCHER 539802 bkpn_clear: FISCHER 539802 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Chemical anchor | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer chemical anchor sr_no_br_cl_ns: 539802 sr_ns: FISCHER539802
r: 08096858 p: 3.27 pid: 176240 b: FISCHER q: 0 st: lt: 8 ean: 4048962462890 sr: FISCHER 564664 sr_no_br: 564664 sr_no_br_cl: 564664 sr_cl: FISCHER564664 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 8 mm Effective length 30 mm Overall length 95 mm Material (bolt) Stainless steel Surface treatment (bolt) None Thread designation M8 n: FISCHER 564664 Piercing anchor FAZ II Plus 8/30 GS R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With large washer. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus GS stainless steel with a large washer is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the stainless steel anchor. Due to the variable anchorage depths and simple mounting, the FAZ II Plus GS stainless steel can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. The stainless steel version is used to fix loads in outdoor areas. For example, the steel anchor with large washer is ideal for fixing steel components or façade substructures with slots. Pre-assembled washer for components with slots. This simplifies alignment and saves time during installation Quick and easy assembly without the need for drill hole cleaning (M8-M24) Stainless steel: maximum safety for outdoor use Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Millimeter accurate adjustment to the loads due to the variable anchoring depths Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD The FAZ II Plus GS are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: Piercing anchor FAZ II Plus 8/30 GS R stainless steel kpn: 564664 kpn_dash: kpn_clear: 564664 bkpn: FISCHER 564664 bkpn_clear: FISCHER 564664 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564664 sr_ns: FISCHER564664
r: 08096860 p: 3.26 pid: 176250 b: FISCHER q: 0 st: lt: 8 ean: 4048962462036 sr: FISCHER 564578 sr_no_br: 564578 sr_no_br_cl: 564578 sr_cl: FISCHER564578 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 8 mm Effective length 160 mm Overall length 225 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M8 n: FISCHER 564578 Piercing anchor FAZ II Plus 8/160 EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 8/160 EV electrolytically galvanised steel kpn: 564578 kpn_dash: kpn_clear: 564578 bkpn: FISCHER 564578 bkpn_clear: FISCHER 564578 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564578 sr_ns: FISCHER564578
r: 08096952 p: 3.26 pid: 176290 b: FISCHER q: 0 st: lt: 8 ean: 4048962463033 sr: FISCHER 564678 sr_no_br: 564678 sr_no_br_cl: 564678 sr_cl: FISCHER564678 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 20 mm Overall length 85 mm Material (bolt) Stainless steel Surface treatment (bolt) None Thread designation M10 n: FISCHER 564678 Piercing anchor FAZ II Plus 10/20 K R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 10/20 K R stainless steel kpn: 564678 kpn_dash: kpn_clear: 564678 bkpn: FISCHER 564678 bkpn_clear: FISCHER 564678 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564678 sr_ns: FISCHER564678
r: 02776799 p: 3.25 pid: 21331 b: FISCHER q: 0 st: lt: 8 ean: 4048962251609 sr: FISCHER 536877 sr_no_br: 536877 sr_no_br_cl: 536877 sr_cl: FISCHER536877 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 14 mm Max. useful length 60 mm Length 125 mm n: FISCHER 536877 concrete screw FBS II 14x125 60/40/10 hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 14x125 60/40/10 hexagon head kpn: 536877 kpn_dash: kpn_clear: 536877 bkpn: FISCHER 536877 bkpn_clear: FISCHER 536877 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536877 sr_ns: FISCHER536877
r: 87993213 p: 3.24 pid: 176395 b: FISCHER q: 125 st: 1 lt: 1 ean: 4006209784167 sr: FISCHER 78416 sr_no_br: 78416 sr_no_br_cl: 78416 sr_cl: FISCHER78416 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 78416 aerated concrete anchor FTP M8 metal cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The metal anchor for metric screws for aerated concrete. The fischer turbo Aircrete anchor FTP M is a special fixing for fixings in aerated concrete. The metal anchor is inserted into the drill hole in the pre-positioned installation using an Allen key. The spiral external thread cuts a mechanical interlock in the building material. The fischer turbo Aircrete anchor FTP M is ideally suited to securely fix mirror cabinets, radiators, and TV consoles to aerated concrete. No setting tool necessary High retention forces due to interlocking in building materials Convenient assembly: reduced wear and tear Low axial and edge distances due to expansion pressure-free anchoring The Allen key chuck makes it possible to set the FTP M without the need for a special setting tool. This allows for a simple installation The FTP M achieves a very high load-bearing capacity in aerated concrete for increased safety The spiral-shaped outer thread taps itself into the aerated concrete with a positive fit. This means that it can be set without the need for much force The special geometry allows for an almost expansion-force-free anchoring. This allows for small edge and spacing distances, and avoids splitting in the case of plastered surfaces Suitable for The FTP M is suitable for pre-positioned installation The aircrete anchor taps itself into the aircrete with a positive fit during the installation process Suitable for metric screws with diameter 6 to 10 mm For installation with a hexagon socket: Size of the hexagon socket corresponds to screw diameter, e. g. FTP M6 is installed with hexagon socket size 6 For installation with cordless screwdriver: use a low torque and use the correct 6-kt bit FTP EM Building materials Aerated concrete Solid panel made from gypsum Application Pictures Lighting Shelves Mirror cabinets Curtain rails Cable and pipe clips Stand-off installations Radiators TV consoles ds: dsc: kts: aerated concrete anchor FTP M8 metal kpn: 78416 kpn_dash: kpn_clear: 78416 bkpn: FISCHER 78416 bkpn_clear: FISCHER 78416 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 78416 sr_ns: FISCHER78416
r: 08096929 p: 3.24 pid: 176317 b: FISCHER q: 0 st: lt: 8 ean: 4048962463088 sr: FISCHER 564683 sr_no_br: 564683 sr_no_br_cl: 564683 sr_cl: FISCHER564683 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 100 mm Overall length 205 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M12 n: FISCHER 564683 Piercing anchor FAZ II Plus 12/100 HBS EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With a large washer, in line with timber construction standards. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus HBS with washer in line with timber construction standard DIN 1052 is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the zinc-plated steel anchor. Due to the variable anchorage depths and simple mounting, the FAZ II Plus HBS can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. The version made of zinc-plated steel is used to fix timber constructions. The steel anchor is, for example, suitable for fixing beams and sills. With washer in line with timber construction standard DIN 1052. This allows for enhanced force transmission when fixing timber constructions Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths The FAZ II Plus HBS with extra large washer as per the wood construction standard DIN 1052 included in the delivery ensures even better force transfer for the fixation of sills and beams, for example The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus HBS is suitable for pre-positioned and push-through installation and is also ideal for stand-off installations Before installation, place the hex nut and washer as per the wood construction standard into the optimum position When the torque is applied, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: Piercing anchor FAZ II Plus 12/100 HBS EV electrolytically galvanised steel kpn: 564683 kpn_dash: kpn_clear: 564683 bkpn: FISCHER 564683 bkpn_clear: FISCHER 564683 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564683 sr_ns: FISCHER564683
r: 02062608 p: 3.22 pid: 2735 b: FISCHER q: 0 st: lt: 8 ean: 4006209798263 sr: FISCHER 79826 sr_no_br: 79826 sr_no_br_cl: 79826 sr_cl: FISCHER79826 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Thread designation M10 VdS approved Yes n: FISCHER 79826 trapezium hanger TZH M 10 cn: BEAM CLAMP cn2: BEAM CLAMP cn_clear: BEAMCLAMP d: Product description Ceiling hanger for metal ceilings. The fischer trapezoid hanger TZ is a fastening element for trapezoidal sheets. It is for fixing sprinkler systems with screw SKS M8x100 in a punched hole. For fixing other pipes with self-tapping screws or steel blind rivets. Specified shear points allow for ideal adjustment to trapezoidal shape. Regulating nut M10 as connecting nut for simple, post-insulation height adjustment. VdS certified Specified shear point Regulating nut The VdS approval for TZ/TZH and the FM approval for the TZA guarantee independently tested safety The TZH's adjustable nut allows a simple, post-installation height adjustment The predetermined bending point of the TZ/TZH/TZA enables ideal adaptation to the trapezoidal sheet shape The TZR reduces the noise emission in the building by using a sound insulation element The TZB is a cost-effective alternative for standard non-approved applications for use with threaded rods and nuts Application Fixing element for trapezoidal sheets (available in five versions) Sprinkler system version to be fixed with screw SKS M8x100 in punched hole Fixing of pipes with self drilling screws or steel blind rivets For use in dry interior areas ds: dsc: kts: trapezium hanger TZH M 10 kpn: 79826 kpn_dash: kpn_clear: 79826 bkpn: FISCHER 79826 bkpn_clear: FISCHER 79826 c_path: Home / Fasteners and machine components / Fasteners / Im / Beam clamp | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer im / Fischer beam clamp sr_no_br_cl_ns: 79826 sr_ns: FISCHER79826
r: 87990683 p: 3.22 pid: 76491 b: FISCHER q: 0 st: lt: 8 ean: 4048962087390 sr: FISCHER 507556 sr_no_br: 507556 sr_no_br_cl: 507556 sr_cl: FISCHER507556 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 8 mm Effective length 30/40 mm Overall length 91 mm Material (bolt) Stainless steel A4 Thread designation M8 n: FISCHER 507556 rapid-action anchor FBN II 8/30 stainless steel R cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The cost-efficient fixing made of stainless steel for use in non-cracked concrete. The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The stainless steel version of the bolt anchor is suitable for fixing façade sub-structures, consoles, and ladders in external areas. The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility Simple assembly due to few taps and minimal slippage Stainless steel: permanent safety in outdoor use The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment Suitable for The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut) When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The head embossing offers a simple control of the anchoring In the case of series installation, we recommend using the FABS bolt anchor setting tool Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: rapid-action anchor FBN II 8/30 stainless steel R kpn: 507556 kpn_dash: kpn_clear: 507556 bkpn: FISCHER 507556 bkpn_clear: FISCHER 507556 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 507556 sr_ns: FISCHER507556
r: 87051371 p: 3.17 pid: 176417 b: FISCHER q: 0 st: lt: 8 ean: 4006209448847 sr: FISCHER 44884 sr_no_br: 44884 sr_no_br_cl: 44884 sr_cl: FISCHER44884 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Drilling diameter 12 mm Overall length 90 mm Material Steel Surface treatment Electrogalvanised Safety anchor Yes Quantiy per pack 50 n: FISCHER 44884 Safety anchor FH II 12/10 with hexagonal head electrolytically galvanised cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description Strong, safe and stylish anchor with hexagonal head International approvals guarantee maximum safety and best performance. The European technical assessment even covers use in earthquake zones (seismic C1 and C2). The relatively flat head of the bolt makes the anchor very discreet. The design between the bolt and the anchor sleeve ensures a high absorbable shear force. Fewer fastening points are therefore required. The optimised geometry reduces the energy required for assembly. The approvals also include the use of hollow drills. The approvals guarantee maximum safety and maximum performance. Also for applications in earthquake zones (seismic C1 and C2). The plastic ring prevents the anchor from rotating during assembly and thus guarantees correct dispersion. The well-known FH II geometry minimises the installation energy required to just a few hammer blows and thus guarantees highest installation convenience. The fischer Safety anchor FH II S with hexagonal head is a sleeve anchor made of galvanised steel. The anchor is inserted in the time-saving push-through assembly. When tightening the anchor, the cone is pulled into the spreader sleeve and tightens against the wall of the drilled hole. The black plastic ring prevents the anchor from turning with it and absorbs the tightening slip. As a result, the mounting piece is pulled against the anchoring ground. The fischer Safety anchor FH II S with hexagonal head is particularly suitable for fixing brackets, steel constructions and cable ducts in cracked and uncracked concrete. Applications Handrails Stairs Brackets Steel constructions Ladders Cable trays Machinery Fencing Facade systems Railing Building materials Approved for: Concrete C20/25 to C50/60, cracked and uncracked Also suitable for: Concrete C12/15 High-density natural stone ds: dsc: kts: Safety anchor FH II 12/10 with hexagonal head electrolytically galvanised kpn: 44884 kpn_dash: kpn_clear: 44884 bkpn: FISCHER 44884 bkpn_clear: FISCHER 44884 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 44884 sr_ns: FISCHER44884
r: 08096884 p: 3.13 pid: 176227 b: FISCHER q: 50 st: 1 lt: 1 ean: 4048962462197 sr: FISCHER 564594 sr_no_br: 564594 sr_no_br_cl: 564594 sr_cl: FISCHER564594 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 16 mm Effective length 5 mm Overall length 128 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M16 n: FISCHER 564594 Piercing anchor FAZ II Plus 16/5 EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs New ETA confirms the use of FAZ II Plus for the dynamic load of components for diameters M16-M24 under direct load Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 16/5 EV electrolytically galvanised steel kpn: 564594 kpn_dash: kpn_clear: 564594 bkpn: FISCHER 564594 bkpn_clear: FISCHER 564594 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564594 sr_ns: FISCHER564594
r: 08096931 p: 3.12 pid: 176335 b: FISCHER q: 0 st: lt: 8 ean: 4048962462791 sr: FISCHER 564654 sr_no_br: 564654 sr_no_br_cl: 564654 sr_cl: FISCHER564654 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 100 mm Overall length 200 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M12 n: FISCHER 564654 Piercing anchor FAZ II Plus 12/100 GS EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With large washer. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus GS with a large washer is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the zinc-plated steel anchor. Due to the variable anchorage depths and simple mounting, the FAZ II Plus GS can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. Pre-assembled washer for components with slots. This simplifies alignment and saves time during installation Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths The FAZ II Plus GS are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: Piercing anchor FAZ II Plus 12/100 GS EV electrolytically galvanised steel kpn: 564654 kpn_dash: kpn_clear: 564654 bkpn: FISCHER 564654 bkpn_clear: FISCHER 564654 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564654 sr_ns: FISCHER564654
r: 02377387 p: 3.09 pid: 176190 b: FISCHER q: 0 st: lt: 8 ean: 4048962158380 sr: FISCHER 519024 sr_no_br: 519024 sr_no_br_cl: 519024 sr_cl: FISCHER519024 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 519024 aerated concrete anchor FPX-I M12 electrolytically galvanised steel cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The strong internal thread anchor with unique four-way expansion for fixings in aerated concrete. The fischer Aircrete anchor FPX-I is made of zinc-plated steel. After pre-drilling, the FPX-I is only driven in with the hammer. It is not necessary to clean the drill hole. The fischer Aircrete anchor is applied with a hex driver via a cordless screwdriver or via a ratchet. The cone is then pulled into the expansion sleeve. In this case the four wings create an undercut in the drill hole. After expansion, the hex socket is automatically released. The fischer Aircrete anchor FPX-I is ideally suited for fixing suspended ceilings, railings or kitchen cabinets in aerated concrete. The first approved metal anchor for aerated concrete High load capacity: Expanding wings create undercut. This saves on fixing points Simple and power-saving installation without an additional setting tool No rotation of the anchor Automatic setting control ensures maximum safety The FPX-I enables easy tightening via the hexagon wrench using a cordless screwdriver or ratchet and therefore offers top installation comfort The deformation-controlled expansion of the anchor with the hexagon wrench ensures safe, even and gentle installation The unique 4-way expansion of the FPX-I with a square expansion sleeve prevents the rotation of the anchor in the drill hole and ensures high tension and shear loads, which means fewer fixing points The releasing of the hexagonal wrench guarantees an automatical setting control for each installation process The first steel anchor with an ETA-Approval and fire protection certificate for fixings in aerated concrete enables use for safety-relevant fixings, too Suitable for The FPX-I with internal thread is suitable for pre-positioned installation Pre-drilling enables easy hammering in, even in high-strength aerated concrete. There is no need to clean the drill hole When the anchor is tightened with the hexagon wrench, the internal thread sleeve starts to rotate and the cone is pulled into the square expansion sleeve. The aerated concrete is compressed on the four sides and generates an undercut in the drill hole When reached the optimum expansion, the hexagon wrench is released automatically from the anchor Building materials Approved for: Aerated concrete with compressive strength 2 to 7 N/mm² Aerated concrete wall or ceiling boards with compressive strength 3. 3 to 4. 4 N/mm² Planked aerated concrete masonry, e. g. plastered, tiled, papered etc Application Suspended ceilings Cable trays Pipelines Ventilation ducts Guard rails/hand rails TV consoles Kitchen cupboards Stand-off installations ds: dsc: kts: aerated concrete anchor FPX-I M12 electrolytically galvanised steel kpn: 519024 kpn_dash: kpn_clear: 519024 bkpn: FISCHER 519024 bkpn_clear: FISCHER 519024 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 519024 sr_ns: FISCHER519024
r: 02019424 p: 3.09 pid: 10626 b: FISCHER q: 0 st: lt: 8 ean: 4006209484104 sr: FISCHER 48410 sr_no_br: 48410 sr_no_br_cl: 48410 sr_cl: FISCHER48410 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 6 mm Drilling diameter 8 mm Overall length 30 mm n: FISCHER EA II M6x30 A4 weft anchor stainless steel - 48410 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The internally threaded anchor made of stainless steel with a rim for simple Hammerset installation. The fischer Hammerset anchor EA II R is an internal threaded anchor made of stainless steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EHS Plus or the machine setting tool EMS the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer Hammerset anchor EA II R is ideal for fixing steel constructions and formwork props in external areas with approval. Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve Use of standard metric screws and threaded rods lowers complexity Power-saving series installation with machine setting tool EA II S-SDS ETA approval for non-cracked concrete and multiple fixings Made of stainless steel for fixings used outside The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use The EMS machine setting tool allows for effortless installation, particularly in the case of series installations The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety Fixing point at hef 25 mm prevents anchor of falling out of the drill hole before being expanded The black fixing point prevents the anchor from falling out of the drill hole during overhead installation Suitable for The EA II is suitable for pre-positioned installation Position the hammerset anchor in the drill hole and drive in flush to the surface of the anchor base using the hammer The sleeve is then expanded by driving in the internal bolt with the EHS Plus setting tool (alternative: EMS machine setting tool), and expanded against the drill hole wall The setting tools must sit on the rim of the anchor to ensure correct expansion Building materials Approved for: Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Pipelines and ventilation ducts Sprinkler systems Cable conduits and wires Gratings Steel constructions Machines Consoles Shuttering props ds: dsc: kts: weft anchor stainless steel kpn: EA II M6x30 A4 kpn_dash: kpn_clear: EAIIM6x30A4 bkpn: FISCHER EA II M6x30 A4 bkpn_clear: FISCHER EAIIM6x30A4 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 48410 sr_ns: FISCHER48410
r: 08096856 p: 3.08 pid: 176256 b: FISCHER q: 0 st: lt: 8 ean: 4048962462357 sr: FISCHER 564610 sr_no_br: 564610 sr_no_br_cl: 564610 sr_cl: FISCHER564610 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 8 mm Effective length 30 mm Overall length 95 mm Material (bolt) Stainless steel Surface treatment (bolt) None Thread designation M8 n: FISCHER 564610 Piercing anchor FAZ II Plus 8/30 R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 8/30 R stainless steel kpn: 564610 kpn_dash: kpn_clear: 564610 bkpn: FISCHER 564610 bkpn_clear: FISCHER 564610 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564610 sr_ns: FISCHER564610
r: 08096961 p: 3.06 pid: 176327 b: FISCHER q: 0 st: lt: 10 ean: 4048962463026 sr: FISCHER 564677 sr_no_br: 564677 sr_no_br_cl: 564677 sr_cl: FISCHER564677 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 10 mm Overall length 75 mm Material (bolt) Stainless steel Surface treatment (bolt) None Thread designation M10 n: FISCHER 564677 Piercing anchor FAZ II Plus 10/10 K R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 10/10 K R stainless steel kpn: 564677 kpn_dash: kpn_clear: 564677 bkpn: FISCHER 564677 bkpn_clear: FISCHER 564677 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564677 sr_ns: FISCHER564677
