r: 83985977 p: 1.55 pid: 58136 b: FISCHER q: 140 st: 1 lt: 1 ean: 4006209801789 sr: FISCHER 80178 sr_no_br: 80178 sr_no_br_cl: 80178 sr_cl: FISCHER80178 sr_dash: sold: 3410 p_range: none act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 100 mm Drill hole depth - mm Material (wall plug) Polyamide (Nylon®) Wall plug type Toggle plug With screw No Application Construction board type (screw head) Drilling diameter 20 mm n: FISCHER 80178 rocker plug KD 8 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The cavity fixing for different board thicknesses with wide transition beams. With the fischer toggle fixing KD lightweight components such as light shelves and wall cabinets can be fixed in gypsum plasterboard and gypsum fibreboard, chipboard, and hollow ceilings made of brick and concrete. The toggle fixing is inserted into the drill hole in the pre-positioned installation and flips open independently when behind the board. This does not require a special installation tool and allows for a fast, convenient installation. High load capacity due to good load distribution on the transition beams High flexibility due to a long threaded rod. Use with various panel thicknesses and attachment thicknesses No installation tool necessary Universal fixing for fastenings in a wide range of drywall and hollow wall materials When the metal crosspiece is pushed. through the drill hole, pull it firmly against the inner wall cavity by tugging the plastic pull ring on the outer wall Afterwards cut the plastic legs off and fasten the fixture with e. g. a screw or screw in a hook or an eyebolt according to your demands Suitable for pre-positioned installation Suitable for The gravity and spring toggle are suitable for pre-positioned installation When placed in the drill hole, the bearing elements of the gravity and spring toggle independently swing open behind the board No special installation tool required. For a fast and convenient installation The KM10 is specially suited to fixing wash basins and urinals into installation and cavity walls Building materials Gypsum plasterboard and gypsum fibreboards Cavity floor slabs made from bricks and concrete Chipboard Plywood Application Pictures Lighting Light shelves Towel rails Mirror cabinets Light cabinets Cable and pipe clips ds: dsc: kts: rocker plug KD 8 kpn: 80178 kpn_dash: kpn_clear: 80178 bkpn: FISCHER 80178 bkpn_clear: FISCHER 80178 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 80178 sr_ns: FISCHER80178
r: 83990736 p: 1.16 pid: 58870 b: FISCHER q: 100 st: 1 lt: 1 ean: 4006209801857 sr: FISCHER 80185 sr_no_br: 80185 sr_no_br_cl: 80185 sr_cl: FISCHER80185 sr_dash: sold: 2958 p_range: none act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 100 mm Drill hole depth - mm Material (wall plug) Polyamide (Nylon®) Wall plug type Toggle plug With screw Yes Application Construction board Drilling diameter 16 mm n: FISCHER 80185 rocker plug KD 6 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The cavity fixing for different board thicknesses with wide transition beams. With the fischer toggle fixing KD lightweight components such as light shelves and wall cabinets can be fixed in gypsum plasterboard and gypsum fibreboard, chipboard, and hollow ceilings made of brick and concrete. The toggle fixing is inserted into the drill hole in the pre-positioned installation and flips open independently when behind the board. This does not require a special installation tool and allows for a fast, convenient installation. High load capacity due to good load distribution on the transition beams High flexibility due to a long threaded rod. Use with various panel thicknesses and attachment thicknesses No installation tool necessary Universal fixing for fastenings in a wide range of drywall and hollow wall materials When the metal crosspiece is pushed. through the drill hole, pull it firmly against the inner wall cavity by tugging the plastic pull ring on the outer wall Afterwards cut the plastic legs off and fasten the fixture with e. g. a screw or screw in a hook or an eyebolt according to your demands Suitable for pre-positioned installation Suitable for The gravity and spring toggle are suitable for pre-positioned installation When placed in the drill hole, the bearing elements of the gravity and spring toggle independently swing open behind the board No special installation tool required. For a fast and convenient installation The KM10 is specially suited to fixing wash basins and urinals into installation and cavity walls Building materials Gypsum plasterboard and gypsum fibreboards Cavity floor slabs made from bricks and concrete Chipboard Plywood Application Pictures Lighting Light shelves Towel rails Mirror cabinets Light cabinets Cable and pipe clips ds: dsc: kts: rocker plug KD 6 kpn: 80185 kpn_dash: kpn_clear: 80185 bkpn: FISCHER 80185 bkpn_clear: FISCHER 80185 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 80185 sr_ns: FISCHER80185
r: 87992747 p: 0.26 pid: 74961 b: FISCHER q: 1000 st: 1 lt: 1 ean: 4006209245569 sr: FISCHER 24556 sr_no_br: 24556 sr_no_br_cl: 24556 sr_cl: FISCHER24556 sr_dash: sold: 1170 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 31 mm Drill hole depth - mm Material (wall plug) Polyamide (Nylon®) Wall plug type Plasterboard plug With screw No Application Construction board type (screw head) Drilling diameter - mm n: FISCHER 24556 metal drywall plug GKM cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The self-tapping metal fixing for gypsum plasterboard and gypsum fibreboard. The fixing is screwed in the pre-positioned installation into the Gypsum plasterboard and gypsum fibreboards flush to the surface. The sharp, self-tapping thread enables a secure, positive fit fixing. This achieves a high load-bearing capacity. The fischer GKM can hold wood, sheet metal and chipboard screws from 4 to 5 mm thickness as well as different hooks and eye screws. Consequently, it is universally suitable for fixing e. g. lights, electrical installations and fitting accessories securely and quickly. No drilling is required in single planked gypsum plasterboard panels. This saves time High load capacity due to positive fit fixing Less space required behind the board due to a short fixing length Ideal for series installation Suitable for pre-positioned installation Due to its material properties, the GKM can be used in gypsum plasterboard and gypsum fibreboard, and can be used with the most wide-ranging screws, hooks and eye screws. This allows for a broad range of applications The sharp, self-tapping thread enables a secure, positive fit fixing. This achieves a high load-bearing capacity The cross-drive recess means that a standard screwdriver or bit can be used. No special setting tool is required The short fixing length means that only a small amount of space is required behind the board. As a result, the GKM can also be used in the case of unknown board thickness and cavity depth Suitable for The GKM is suitable for pre-positioned installation The self-tapping metal fixing GKM taps itself into the plasterboard with a positive fit Flush installation in the board building material. Overtightening the fixing should be avoided. Therefore, the installation torque should be limited when using a battery operated screwdriver Adapted for wood, self-tapping and chipboard screws of 4. 0 to 5. 0 mm diameter Pre-drill with a Ø 8 mm drill bit when using gypsum fibreboard and double-planked gypsum plasterboard Not suitable for tiled plasterboard Building materials Gypsum fibreboard Gypsum plasterboard Application Pictures Lighting Electrical installations Fitting accessories ds: dsc: kts: metal drywall plug GKM kpn: 24556 kpn_dash: kpn_clear: 24556 bkpn: FISCHER 24556 bkpn_clear: FISCHER 24556 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 24556 sr_ns: FISCHER24556
r: 03297794 p: 0.04 pid: 176165 b: FISCHER q: 239100 st: 1 lt: 1 ean: 4048962239836 sr: FISCHER 535453 sr_no_br: 535453 sr_no_br_cl: 535453 sr_cl: FISCHER535453 sr_dash: sold: 1116 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw No Drilling diameter 6 mm type (screw head) Application General Wall plug type Universal plug Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Drill hole depth 40 mm Length (Wall plug) 30 mm n: FISCHER 535453 DuoPower 6x30 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The duo of power and intelligence The fischer DuoPower offers very good hold values as a result of its 2 components: Depending on the building material, the grey components made from high quality nylon automatically activates the optimum product function (expansion, folding, knotting) for the best hold. The expansion wings of the red component support the secure expansion and offer additional security to the grey component. Easy screwing-in of the screw and correct "tightening" to close. No over-tightening of the screw. The preshaped edge on the plug head prevents the plug from slipping into the drill hole. Combination of two material components for more performance Secure functions for solid (expansion) and hollow and panel building materials (folding/knotting) Easy installation: narrow edge of the plug prevents it from falling deeper into the drill hole Best possible feedback from the anchor - you can feel that the anchor is sitting perfectly Two component materials for top load values and intelligent functioning depending on the substrate Great feedback (feel-good factor) of the plug. You can feel exactly, when the plug is installed perfectly The narrow plug rim prevents slipping into the drill hole The serrated anti-rotation feature prevents rotation in the drill hole during installation The greater anchorage depth of the DuoPower 6 x 50, 8 x 65 and 10 x 80 means that the plug is especially suited to fixings in hollow building materials, aerated concrete and to bridge plaster Suitable for The DuoPower is suitable for pre-positioned and push-through installation The red expansion wings support the safe expansion and offer additional safety for the grey component The duo of two different materials and its multiple functional abilities (expanding, folding, and knotting) extend the range of applications to additional materials with top loads The required screw length is given by the plug length + fixture thickness + 1x the screw diameter Suitable for wood and chipboard screws, as well as stud screws In the case of fixing boards, the threadless part of the screw must not be longer than the fixture Building materials Concrete Solid brick Solid sand-lime brick Aerated concrete Vertically perforated brick Perforated sand-lime brick Plasterboard Gypsum plasterboard and gypsum fibreboards Hollow blocks made from lightweight concrete Cavity floor slabs made from bricks and concrete or similar Natural stone Chipboard Solid panel made from gypsum Solid brick made from lightweight concrete Application TV consoles Lighting Shelves Mirror cabinets Letter boxes Pictures Fixing blinds Curtain rails Wash basin fixings Plumbing and heating fixings Bath and toilet installations Wall cabinets Range hood ds: dsc: Scope of delivery (per purchase of 100) 100x DuoPower 6x 30 kts: DuoPower 6x30 kpn: 535453 kpn_dash: kpn_clear: 535453 bkpn: FISCHER 535453 bkpn_clear: FISCHER 535453 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 535453 sr_ns: FISCHER535453
r: 87991147 p: 0.25 pid: 76582 b: FISCHER q: 1050 st: 1 lt: 1 ean: 4006209503577 sr: FISCHER 50357 sr_no_br: 50357 sr_no_br_cl: 50357 sr_cl: FISCHER50357 sr_dash: sold: 1087.5 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 8 mm Application General With collar Yes type (screw head) PZ3 Wall plug type Hammer-in plug Material (wall plug) Polyamide (Nylon®) Drill hole depth - mm Length (Wall plug) 100 mm n: FISCHER 50357 nail plug N 8 x 100/60 S with countersunk head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The hammer-in plug for simple, fast and economic installation. The fischer Hammerfix N-S with countersunk head consists of a high-quality nylon plug and a zinc-plated nail screw. These are already pre-fitted for quick assembly. The Hammerfix is led through the component in the time-saving through-type installation. When driving in the nail screw, the fixing sleeve expands and anchors itself securely in the building material. The fischer Hammerfix N-S with countersunk head is ideal for fixing timber constructions in all building materials in internal areas. Fast Hammerset installation saves time: ideal for series installation Simple and secure installation: Integrated hammer-in stop prevents premature anchor spreading Subsequent dismantling of the nail screw with a cross-slot recess is possible With countersunk head The rapid hammerset installation reduces the amount of time required and allows for an economic series installation The integrated hammer-in stop prevents the plug from expanding prematurely (jamming), thus enabling a problem-free installation Together with the cross-slot recess, the thread of the nail screw allows the screw to be removed, thus allowing for subsequent dismantling The wide range of diameters and usage lengths provides the correct plug for every fixing Suitable for Suitable for push-through installation When hammered in, the nail screw causes the plug to expand in two directions, thus providing a secure anchoring in the building material Countersunk head plugs are recommended for the installation of timber constructions; in the case of metal constructions, use flat-head plugs, and use pan-head plugs for long holes Building materials Concrete Solid sand-lime brick Building brick Natural stone Solid brick made from lightweight concrete Aerated concrete Solid panel made from gypsum Application Substructures made of wood Wall connection or plaster profiles Cable and pipe clips Perforated tapes ds: dsc: kts: nail plug N 8 x 100/60 S with countersunk head kpn: 50357 kpn_dash: kpn_clear: 50357 bkpn: FISCHER 50357 bkpn_clear: FISCHER 50357 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 50357 sr_ns: FISCHER50357
r: 87030018 p: 0.71 pid: 75126 b: FISCHER q: 375 st: 1 lt: 1 ean: 4006209504918 sr: FISCHER 50491 sr_no_br: 50491 sr_no_br_cl: 50491 sr_cl: FISCHER50491 sr_dash: sold: 1082.75 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw No Drilling diameter 8 mm type (screw head) With collar No Application Aerated concrete; For soft materials Wall plug type Universal plug Material (wall plug) Polyamide (Nylon®) Drill hole depth - mm Length (Wall plug) 50 mm n: FISCHER 50491 aerated concrete plug GB 8 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The special plug for different fixings in aerated concrete. The fischer Aircrete anchor GB 8 is a special anchor for different fixings in aerated concrete. The GB, made from high-quality nylon, is hammered in rotary mode after pre-drilling. The characteristic outer ribs ensure an interlocking connection between the building material and anchor. The fischer Aircrete anchor GB is ideal for fixing façade and roof constructions as well as railings in aerated concrete. Optimum pressure distribution and high load-bearing capacity. Spiral outer ribs cut a positive fit in the aerated concrete No setting tool necessary: simply hammer in using the hammer The general building approval guarantees approved safety for use in safety-relevant applications The spiral-shaped outer ribs cut a positive fit in the soft building material, thus ensuring the best pressure distribution and load-bearing capacity Can be applied with a hammer - there is no need for special tools, thus saving time and money for the installation The GB can also be used safely outside (e. g. in façade installation) when combined with the approved fischer safety screw in A4 Suitable for The GB is suitable for pre-positioned installation The spiral-shaped outer ribs ensure a positive fit connection between the building material and anchor The required screw length is given by: Anchor length + fixture thickness + 1 x screw diameter The GB 10 must be used with fischer safety screws to fulfil the approval and to achieve the maximum load-bearing capacity Use rotary drilling to create the drill hole Can be used in unplastered aerated concrete Building materials Approved for (GB 10) resp. suitable for (GB 8 and GB 14): Aerated concrete >= PB2, PP2 Also suitable for: Aerated concrete and ceiling panels of compressive strength >= 3. 3 Application Light cable trays Pipelines Guard rails Façade and roof constructions made of wood and metal Light canopy brackets Letter boxes Trellis ds: dsc: kts: aerated concrete plug GB 8 kpn: 50491 kpn_dash: kpn_clear: 50491 bkpn: FISCHER 50491 bkpn_clear: FISCHER 50491 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 50491 sr_ns: FISCHER50491
r: 85940062 p: 0.078 pid: 73834 b: FISCHER q: 2550 st: 1 lt: 1 ean: 4006209503546 sr: FISCHER 50354 sr_no_br: 50354 sr_no_br_cl: 50354 sr_cl: FISCHER50354 sr_dash: sold: 963.3 p_range: none act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 6 mm Application General With collar Yes type (screw head) PZ2 Wall plug type Hammer-in plug Material (wall plug) Polyamide (Nylon®) Drill hole depth - mm Length (Wall plug) 40 mm n: FISCHER 50354 nail plug N 6 x 40/10 S with countersunk head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The hammer-in plug for simple, fast and economic installation. The fischer Hammerfix N-S with countersunk head consists of a high-quality nylon plug and a zinc-plated nail screw. These are already pre-fitted for quick assembly. The Hammerfix is led through the component in the time-saving through-type installation. When driving in the nail screw, the fixing sleeve expands and anchors itself securely in the building material. The fischer Hammerfix N-S with countersunk head is ideal for fixing timber constructions in all building materials in internal areas. Fast Hammerset installation saves time: ideal for series installation Simple and secure installation: Integrated hammer-in stop prevents premature anchor spreading Subsequent dismantling of the nail screw with a cross-slot recess is possible With countersunk head The rapid hammerset installation reduces the amount of time required and allows for an economic series installation The integrated hammer-in stop prevents the plug from expanding prematurely (jamming), thus enabling a problem-free installation Together with the cross-slot recess, the thread of the nail screw allows the screw to be removed, thus allowing for subsequent dismantling The wide range of diameters and usage lengths provides the correct plug for every fixing Suitable for Suitable for push-through installation When hammered in, the nail screw causes the plug to expand in two directions, thus providing a secure anchoring in the building material Countersunk head plugs are recommended for the installation of timber constructions; in the case of metal constructions, use flat-head plugs, and use pan-head plugs for long holes Building materials Concrete Solid sand-lime brick Building brick Natural stone Solid brick made from lightweight concrete Aerated concrete Solid panel made from gypsum Application Substructures made of wood Wall connection or plaster profiles Cable and pipe clips Perforated tapes ds: dsc: kts: nail plug N 6 x 40/10 S with countersunk head kpn: 50354 kpn_dash: kpn_clear: 50354 bkpn: FISCHER 50354 bkpn_clear: FISCHER 50354 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 50354 sr_ns: FISCHER50354
r: 87030019 p: 0.85 pid: 76209 b: FISCHER q: 340 st: 1 lt: 1 ean: 4006209504925 sr: FISCHER 50492 sr_no_br: 50492 sr_no_br_cl: 50492 sr_cl: FISCHER50492 sr_dash: sold: 833 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 55 mm Drill hole depth 65 mm Material (wall plug) Polyamide (Nylon®) Wall plug type Universal plug With screw No Application Aerated concrete type (screw head) Drilling diameter 10 mm n: FISCHER 50492 aerated concrete plug GB 10 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The special plug for different fixings in aerated concrete. The fischer Aircrete anchor GB 10 is an officially approved special anchor for safety-relevant fixings in aerated concrete. The GB, made from high-quality nylon, is hammered in rotary mode after pre-drilling. The characteristic outer ribs ensure an interlocking connection between the building material and anchor. The fischer Aircrete anchor GB is ideal for fixing façade and roof constructions as well as railings in aerated concrete. Building Authority approval for safety-relevant applications Optimum pressure distribution and high load-bearing capacity. Spiral outer ribs cut a positive fit in the aerated concrete No setting tool necessary: simply hammer in using the hammer Approved with the fischer safety screw The general building approval guarantees approved safety for use in safety-relevant applications The spiral-shaped outer ribs cut a positive fit in the soft building material, thus ensuring the best pressure distribution and load-bearing capacity Can be applied with a hammer - there is no need for special tools, thus saving time and money for the installation The GB can also be used safely outside (e. g. in façade installation) when combined with the approved fischer safety screw in A4 Suitable for The GB is suitable for pre-positioned installation The spiral-shaped outer ribs ensure a positive fit connection between the building material and anchor The required screw length is given by: Anchor length + fixture thickness + 1 x screw diameter The GB 10 must be used with fischer safety screws to fulfil the approval and to achieve the maximum load-bearing capacity Use rotary drilling to create the drill hole Can be used in unplastered aerated concrete Building materials Approved for (GB 10) resp. suitable for (GB 8 and GB 14): Aerated concrete >= PB2, PP2 Also suitable for: Aerated concrete and ceiling panels of compressive strength >= 3. 3 Application Light cable trays Pipelines Guard rails Façade and roof constructions made of wood and metal Light canopy brackets Letter boxes Trellis ds: dsc: kts: aerated concrete plug GB 10 kpn: 50492 kpn_dash: kpn_clear: 50492 bkpn: FISCHER 50492 bkpn_clear: FISCHER 50492 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 50492 sr_ns: FISCHER50492
r: 87940258 p: 0.092 pid: 75872 b: FISCHER q: 1300 st: 1 lt: 1 ean: 4006209778692 sr: FISCHER 77869 sr_no_br: 77869 sr_no_br_cl: 77869 sr_cl: FISCHER77869 sr_dash: sold: 772.8 p_range: none act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 50 mm Drill hole depth 60 mm Material (wall plug) Polyamide (Nylon®) Wall plug type Universal plug With screw No With collar No type (screw head) Drilling diameter 8 mm n: FISCHER 77869 universal plug UX 8 x 50 without collar cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The nylon plug for all building materials. The fischer universal plug UX is a plastic plug made from high-quality nylon. The universal plug expands in solid building materials and knots in hollow and panel building materials for maximum hold. This makes the fischer UX always the right choice - even if the for unknown building materials. The edge prevents it from slipping deeper during installation. In the version without edge, and larger anchorage depths, the fischer universal plug UX is suitable for push-through installation. The fischer universal plug UX is recommended, for example, for fixing lighting, curtain rails, lightweight cupboards and skirting. The fixing sets with screws, eye screws and hooks provide the optimum solution for almost all applications. Plug holds in all building materials Plug expands in solid building materials Maximum hold in solid and hollow building materials due to knotting Optimum screw guidance due to slanting connection bridges Installation safety due to anti-rotation lock The universal operating principle (knotting or expanding) allows for use in all solid, hollow and board building materials. Thus the UX is the correct choice for unknown base materials The UX's angled connection ridges allow for optimum screw guidance. Serrated anti-rotation locks prevent rotation in the drill hole. This guarantees the greatest possible installation safety Fixing sets with screws, eye screws and hooks provide the right solution for all applications Suitable for The UX with rim is suitable for pre-positioned installation; the UX without rim is suitable for push-through installation Turning in the screw causes the UX to expand in the solid building material and to knot within the cavity The required screw length is given by the plug length + fixture thickness + 1 x screw diameter Suitable for wood and chipboard screws, as well as stud screws In the case of board building materials, the threadless part of the screw must not be longer than the fixture, and the UX with rim is to be used The edge distance must be at least one plug length Building materials Concrete Gypsum plasterboard and gypsum fibreboards Vertically perforated brick Hollow blocks made from lightweight concrete Cavity floor slabs made from bricks and concrete Perforated sand-lime brick Solid sand-lime brick Natural stone Aerated concrete Chipboard Solid panel made from gypsum Solid brick made from lightweight concrete Solid brick Application Pictures Lighting Skirting Light cabinets Towel rails Mirror cabinets Curtain rails Wash basin fixings TV consoles Plumbing and heating fixings ds: dsc: kts: universal plug UX 8 x 50 without collar kpn: 77869 kpn_dash: kpn_clear: 77869 bkpn: FISCHER 77869 bkpn_clear: FISCHER 77869 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 77869 sr_ns: FISCHER77869
r: 87992328 p: 0.141 pid: 76619 b: FISCHER q: 5650 st: 1 lt: 1 ean: 4042205039795 sr: FISCHER 50358 sr_no_br: 50358 sr_no_br_cl: 50358 sr_cl: FISCHER50358 sr_dash: sold: 683.85 p_range: none act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 8 mm Application For wood With collar Yes type (screw head) PZ3 Wall plug type Hammer-in plug Material (wall plug) Polyamide (Nylon®) Drill hole depth - mm Length (Wall plug) 80 mm n: FISCHER 50358 nail plug N 8 x 80/40 S with countersunk head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The hammer-in plug for simple, fast and economic installation. The fischer Hammerfix N-S with countersunk head consists of a high-quality nylon plug and a zinc-plated nail screw. These are already pre-fitted for quick assembly. The Hammerfix is led through the component in the time-saving through-type installation. When driving in the nail screw, the fixing sleeve expands and anchors itself securely in the building material. The fischer Hammerfix N-S with countersunk head is ideal for fixing timber constructions in all building materials in internal areas. Fast Hammerset installation saves time: ideal for series installation Simple and secure installation: Integrated hammer-in stop prevents premature anchor spreading Subsequent dismantling of the nail screw with a cross-slot recess is possible With countersunk head The rapid hammerset installation reduces the amount of time required and allows for an economic series installation The integrated hammer-in stop prevents the plug from expanding prematurely (jamming), thus enabling a problem-free installation Together with the cross-slot recess, the thread of the nail screw allows the screw to be removed, thus allowing for subsequent dismantling The wide range of diameters and usage lengths provides the correct plug for every fixing Suitable for Suitable for push-through installation When hammered in, the nail screw causes the plug to expand in two directions, thus providing a secure anchoring in the building material Countersunk head plugs are recommended for the installation of timber constructions; in the case of metal constructions, use flat-head plugs, and use pan-head plugs for long holes Building materials Concrete Solid sand-lime brick Building brick Natural stone Solid brick made from lightweight concrete Aerated concrete Solid panel made from gypsum Application Substructures made of wood Wall connection or plaster profiles Cable and pipe clips Perforated tapes ds: dsc: kts: nail plug N 8 x 80/40 S with countersunk head kpn: 50358 kpn_dash: kpn_clear: 50358 bkpn: FISCHER 50358 bkpn_clear: FISCHER 50358 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 50358 sr_ns: FISCHER50358
r: 87030006 p: 0.077 pid: 74017 b: FISCHER q: 1650 st: 1 lt: 1 ean: 4006209501108 sr: FISCHER 50110 sr_no_br: 50110 sr_no_br_cl: 50110 sr_cl: FISCHER50110 sr_dash: sold: 569.8 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 50 mm Drill hole depth 70 mm Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Wall plug type Universal plug With screw No With collar No Application Brick; Concrete; Aerated concrete; Construction board type (screw head) Drilling diameter 10 mm n: FISCHER 50110 plug S 10 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The installation-friendly nylon plug with 2-way expansion. The fischer expansion plug S is the original and the proven classic millions of times for decades. The plastic fixing is made entirely from high-quality nylon. As a result, the plug is particularly robust during installation and guarantees permanent security. As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This prevents the building material from spalling due to fixings close to the edge. Wood or chipboard screws can be used to fix the object. The fischer expansion plug S is ideal for fixing in concrete and solid masonry. The rimless plug is suitable for pre-positioned and push-through installation Simple insertion due to the ease of pushing in the plug The anti-rotation lock prevents rotation in the drill hole. This guarantees a high degree of safety during installation The rimless plug sleeve allows for the plug to be set as deep as required below the plaster to the bearing substrate to achieve the maximum load-bearing capacity As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This allows for smaller edge distances The slimline plug geometry makes it easy to push the plug into the drill hole. For a fast and simple installation The anti-rotation lock prevents the plug rotating in the drill hole, thus guaranteeing a high level of installation safety Suitable for The expansion plug S is suitable for pre-positioned and push-through installation When turning in the screw, the expansion plug S expands in two directions, thus providing a secure anchoring in the building material The required screw length is given by the plug length + plaster and/or insulation material thickness + fixture thickness + 1 x screw diameter Suitable for wood and chipboard screws The edge distance must be at least one plug length For installations close to the edge, turn the plug so that the expansion force acts parallel to the edge Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick made from lightweight concrete Solid brick Application Pictures Lighting Skirting Light shelves Mirror cabinets Letter boxes Motion detectors Information boards Curtain rails Electrical installations ds: dsc: kts: plug S 10 kpn: 50110 kpn_dash: kpn_clear: 50110 bkpn: FISCHER 50110 bkpn_clear: FISCHER 50110 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 50110 sr_ns: FISCHER50110
r: 87030009 p: 0.39 pid: 75120 b: FISCHER q: 50 st: 1 lt: 1 ean: 4006209501160 sr: FISCHER 50116 sr_no_br: 50116 sr_no_br_cl: 50116 sr_cl: FISCHER50116 sr_dash: sold: 569.4 p_range: none act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 80 mm Drill hole depth 100 mm Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Wall plug type Universal plug With screw No Application General type (screw head) Drilling diameter 16 mm n: FISCHER 50116 plug S 16 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The installation-friendly nylon plug with 2-way expansion. The fischer expansion plug S is the original and the proven classic millions of times for decades. The plastic fixing is made entirely from high-quality nylon. As a result, the plug is particularly robust during installation and guarantees permanent security. As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This prevents the building material from spalling due to fixings close to the edge. Wood or chipboard screws can be used to fix the object. The fischer expansion plug S is ideal for fixing in concrete and solid masonry. The rimless plug is suitable for pre-positioned and push-through installation Simple insertion due to the ease of pushing in the plug The anti-rotation lock prevents rotation in the drill hole. This guarantees a high degree of safety during installation The rimless plug sleeve allows for the plug to be set as deep as required below the plaster to the bearing substrate to achieve the maximum load-bearing capacity As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This allows for smaller edge distances The slimline plug geometry makes it easy to push the plug into the drill hole. For a fast and simple installation The anti-rotation lock prevents the plug rotating in the drill hole, thus guaranteeing a high level of installation safety Suitable for The expansion plug S is suitable for pre-positioned and push-through installation When turning in the screw, the expansion plug S expands in two directions, thus providing a secure anchoring in the building material The required screw length is given by the plug length + plaster and/or insulation material thickness + fixture thickness + 1 x screw diameter Suitable for wood and chipboard screws The edge distance must be at least one plug length For installations close to the edge, turn the plug so that the expansion force acts parallel to the edge Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick made from lightweight concrete Solid brick Application Pictures Lighting Skirting Light shelves Mirror cabinets Letter boxes Motion detectors Information boards Curtain rails Electrical installations ds: dsc: kts: plug S 16 kpn: 50116 kpn_dash: kpn_clear: 50116 bkpn: FISCHER 50116 bkpn_clear: FISCHER 50116 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 50116 sr_ns: FISCHER50116
r: 87030003 p: 0.029 pid: 75643 b: FISCHER q: 8900 st: 1 lt: 1 ean: 4006209501061 sr: FISCHER 50106 sr_no_br: 50106 sr_no_br_cl: 50106 sr_cl: FISCHER50106 sr_dash: sold: 548.1 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 30 mm Drill hole depth 40 mm Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Wall plug type Universal plug With screw No With collar No Application Concrete; Brick; Aerated concrete; Construction board type (screw head) Drilling diameter 6 mm n: FISCHER 50106 plug S 6 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The installation-friendly nylon plug with 2-way expansion. The fischer expansion plug S is the original and the proven classic millions of times for decades. The plastic fixing is made entirely from high-quality nylon. As a result, the plug is particularly robust during installation and guarantees permanent security. As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This prevents the building material from spalling due to fixings close to the edge. Wood or chipboard screws can be used to fix the object. The fischer expansion plug S is ideal for fixing in concrete and solid masonry. The rimless plug is suitable for pre-positioned and push-through installation Simple insertion due to the ease of pushing in the plug The anti-rotation lock prevents rotation in the drill hole. This guarantees a high degree of safety during installation The rimless plug sleeve allows for the plug to be set as deep as required below the plaster to the bearing substrate to achieve the maximum load-bearing capacity As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This allows for smaller edge distances The slimline plug geometry makes it easy to push the plug into the drill hole. For a fast and simple installation The anti-rotation lock prevents the plug rotating in the drill hole, thus guaranteeing a high level of installation safety Suitable for The expansion plug S is suitable for pre-positioned and push-through installation When turning in the screw, the expansion plug S expands in two directions, thus providing a secure anchoring in the building material The required screw length is given by the plug length + plaster and/or insulation material thickness + fixture thickness + 1 x screw diameter Suitable for wood and chipboard screws The edge distance must be at least one plug length For installations close to the edge, turn the plug so that the expansion force acts parallel to the edge Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick made from lightweight concrete Solid brick Application Pictures Lighting Skirting Light shelves Mirror cabinets Letter boxes Motion detectors Information boards Curtain rails Electrical installations ds: dsc: kts: plug S 6 kpn: 50106 kpn_dash: kpn_clear: 50106 bkpn: FISCHER 50106 bkpn_clear: FISCHER 50106 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 50106 sr_ns: FISCHER50106
r: 85940061 p: 0.097 pid: 73983 b: FISCHER q: 3500 st: 1 lt: 1 ean: 4006209503553 sr: FISCHER 50355 sr_no_br: 50355 sr_no_br_cl: 50355 sr_cl: FISCHER50355 sr_dash: sold: 523.8 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 6 mm Application General With collar Yes type (screw head) PZ2 Wall plug type Hammer-in plug Material (wall plug) Polyamide (Nylon®) Drill hole depth - mm Length (Wall plug) 60 mm n: FISCHER 50355 nail plug N 6 x 60/30 S with countersunk head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The hammer-in plug for simple, fast and economic installation. The fischer Hammerfix N-S with countersunk head consists of a high-quality nylon plug and a zinc-plated nail screw. These are already pre-fitted for quick assembly. The Hammerfix is led through the component in the time-saving through-type installation. When driving in the nail screw, the fixing sleeve expands and anchors itself securely in the building material. The fischer Hammerfix N-S with countersunk head is ideal for fixing timber constructions in all building materials in internal areas. Fast Hammerset installation saves time: ideal for series installation Simple and secure installation: Integrated hammer-in stop prevents premature anchor spreading Subsequent dismantling of the nail screw with a cross-slot recess is possible With countersunk head The rapid hammerset installation reduces the amount of time required and allows for an economic series installation The integrated hammer-in stop prevents the plug from expanding prematurely (jamming), thus enabling a problem-free installation Together with the cross-slot recess, the thread of the nail screw allows the screw to be removed, thus allowing for subsequent dismantling The wide range of diameters and usage lengths provides the correct plug for every fixing Suitable for Suitable for push-through installation When hammered in, the nail screw causes the plug to expand in two directions, thus providing a secure anchoring in the building material Countersunk head plugs are recommended for the installation of timber constructions; in the case of metal constructions, use flat-head plugs, and use pan-head plugs for long holes Building materials Concrete Solid sand-lime brick Building brick Natural stone Solid brick made from lightweight concrete Aerated concrete Solid panel made from gypsum Application Substructures made of wood Wall connection or plaster profiles Cable and pipe clips Perforated tapes ds: dsc: kts: nail plug N 6 x 60/30 S with countersunk head kpn: 50355 kpn_dash: kpn_clear: 50355 bkpn: FISCHER 50355 bkpn_clear: FISCHER 50355 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 50355 sr_ns: FISCHER50355
r: 03297796 p: 0.055 pid: 176159 b: FISCHER q: 8300 st: 1 lt: 1 ean: 4048962239850 sr: FISCHER 535455 sr_no_br: 535455 sr_no_br_cl: 535455 sr_cl: FISCHER535455 sr_dash: sold: 467.5 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw No Drilling diameter 8 mm type (screw head) Application General Wall plug type Universal plug Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Drill hole depth - mm Length (Wall plug) 40 mm n: FISCHER 535455 DuoPower 8x40 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The duo of power and intelligence The fischer DuoPower offers very good hold values as a result of its 2 components: Depending on the building material, the grey components made from high quality nylon automatically activates the optimum product function (expansion, folding, knotting) for the best hold. The expansion wings of the red component support the secure expansion and offer additional security to the grey component. Easy screwing-in of the screw and correct "tightening" to close. No over-tightening of the screw. The preshaped edge on the plug head prevents the plug from slipping into the drill hole. Combination of two material components for more performance Secure functions for solid (expansion) and hollow and panel building materials (folding/knotting) Easy installation: narrow edge of the plug prevents it from falling deeper into the drill hole Best possible feedback from the anchor - you can feel that the anchor is sitting perfectly Two component materials for top load values and intelligent functioning depending on the substrate Great feedback (feel-good factor) of the plug. You can feel exactly, when the plug is installed perfectly The narrow plug rim prevents slipping into the drill hole The serrated anti-rotation feature prevents rotation in the drill hole during installation The greater anchorage depth of the DuoPower 6 x 50, 8 x 65 and 10 x 80 means that the plug is especially suited to fixings in hollow building materials, aerated concrete and to bridge plaster Suitable for The DuoPower is suitable for pre-positioned and push-through installation The red expansion wings support the safe expansion and offer additional safety for the grey component The duo of two different materials and its multiple functional abilities (expanding, folding, and knotting) extend the range of applications to additional materials with top loads The required screw length is given by the plug length + fixture thickness + 1x the screw diameter Suitable for wood and chipboard screws, as well as stud screws In the case of fixing boards, the threadless part of the screw must not be longer than the fixture Building materials Concrete Solid brick Solid sand-lime brick Aerated concrete Vertically perforated brick Perforated sand-lime brick Plasterboard Gypsum plasterboard and gypsum fibreboards Hollow blocks made from lightweight concrete Cavity floor slabs made from bricks and concrete or similar Natural stone Chipboard Solid panel made from gypsum Solid brick made from lightweight concrete Application TV consoles Lighting Shelves Mirror cabinets Letter boxes Pictures Fixing blinds Curtain rails Wash basin fixings Plumbing and heating fixings Bath and toilet installations Wall cabinets Range hood ds: dsc: Scope of delivery (per purchase of 100) 100x DuoPower 8x 40 kts: DuoPower 8x40 kpn: 535455 kpn_dash: kpn_clear: 535455 bkpn: FISCHER 535455 bkpn_clear: FISCHER 535455 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 535455 sr_ns: FISCHER535455
r: 87992871 p: 0.129 pid: 74968 b: FISCHER q: 800 st: 1 lt: 1 ean: 4006209503560 sr: FISCHER 50356 sr_no_br: 50356 sr_no_br_cl: 50356 sr_cl: FISCHER50356 sr_dash: sold: 464.4 p_range: none act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 8 mm Application General With collar Yes type (screw head) PZ3 Wall plug type Hammer-in plug Material (wall plug) Polyamide (Nylon®) Drill hole depth - mm Length (Wall plug) 60 mm n: FISCHER 50356 nail plug N 8 x 60/20 S with countersunk head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The hammer-in plug for simple, fast and economic installation. The fischer Hammerfix N-S with countersunk head consists of a high-quality nylon plug and a zinc-plated nail screw. These are already pre-fitted for quick assembly. The Hammerfix is led through the component in the time-saving through-type installation. When driving in the nail screw, the fixing sleeve expands and anchors itself securely in the building material. The fischer Hammerfix N-S with countersunk head is ideal for fixing timber constructions in all building materials in internal areas. Fast Hammerset installation saves time: ideal for series installation Simple and secure installation: Integrated hammer-in stop prevents premature anchor spreading Subsequent dismantling of the nail screw with a cross-slot recess is possible With countersunk head The rapid hammerset installation reduces the amount of time required and allows for an economic series installation The integrated hammer-in stop prevents the plug from expanding prematurely (jamming), thus enabling a problem-free installation Together with the cross-slot recess, the thread of the nail screw allows the screw to be removed, thus allowing for subsequent dismantling The wide range of diameters and usage lengths provides the correct plug for every fixing Suitable for Suitable for push-through installation When hammered in, the nail screw causes the plug to expand in two directions, thus providing a secure anchoring in the building material Countersunk head plugs are recommended for the installation of timber constructions; in the case of metal constructions, use flat-head plugs, and use pan-head plugs for long holes Building materials Concrete Solid sand-lime brick Building brick Natural stone Solid brick made from lightweight concrete Aerated concrete Solid panel made from gypsum Application Substructures made of wood Wall connection or plaster profiles Cable and pipe clips Perforated tapes ds: dsc: kts: nail plug N 8 x 60/20 S with countersunk head kpn: 50356 kpn_dash: kpn_clear: 50356 bkpn: FISCHER 50356 bkpn_clear: FISCHER 50356 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 50356 sr_ns: FISCHER50356
r: 87030005 p: 0.04 pid: 74325 b: FISCHER q: 7600 st: 1 lt: 1 ean: 4006209501085 sr: FISCHER 50108 sr_no_br: 50108 sr_no_br_cl: 50108 sr_cl: FISCHER50108 sr_dash: sold: 444 p_range: none act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 40 mm Drill hole depth - mm Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Wall plug type Universal plug With screw No With collar No Application Brick; Concrete; Aerated concrete; Construction board type (screw head) Drilling diameter 8 mm n: FISCHER 50108 plug S 8 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The installation-friendly nylon plug with 2-way expansion. The fischer expansion plug S is the original and the proven classic millions of times for decades. The plastic fixing is made entirely from high-quality nylon. As a result, the plug is particularly robust during installation and guarantees permanent security. As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This prevents the building material from spalling due to fixings close to the edge. Wood or chipboard screws can be used to fix the object. The fischer expansion plug S is ideal for fixing in concrete and solid masonry. The rimless plug is suitable for pre-positioned and push-through installation Simple insertion due to the ease of pushing in the plug The anti-rotation lock prevents rotation in the drill hole. This guarantees a high degree of safety during installation The rimless plug sleeve allows for the plug to be set as deep as required below the plaster to the bearing substrate to achieve the maximum load-bearing capacity As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This allows for smaller edge distances The slimline plug geometry makes it easy to push the plug into the drill hole. For a fast and simple installation The anti-rotation lock prevents the plug rotating in the drill hole, thus guaranteeing a high level of installation safety Suitable for The expansion plug S is suitable for pre-positioned and push-through installation When turning in the screw, the expansion plug S expands in two directions, thus providing a secure anchoring in the building material The required screw length is given by the plug length + plaster and/or insulation material thickness + fixture thickness + 1 x screw diameter Suitable for wood and chipboard screws The edge distance must be at least one plug length For installations close to the edge, turn the plug so that the expansion force acts parallel to the edge Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick made from lightweight concrete Solid brick Application Pictures Lighting Skirting Light shelves Mirror cabinets Letter boxes Motion detectors Information boards Curtain rails Electrical installations ds: dsc: kts: plug S 8 kpn: 50108 kpn_dash: kpn_clear: 50108 bkpn: FISCHER 50108 bkpn_clear: FISCHER 50108 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 50108 sr_ns: FISCHER50108
r: 87990066 p: 0.067 pid: 75900 b: FISCHER q: 0 st: lt: 1 ean: 4006209627549 sr: FISCHER 62754 sr_no_br: 62754 sr_no_br_cl: 62754 sr_cl: FISCHER62754 sr_dash: sold: 442.2 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 35 mm Drill hole depth 45 mm Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Wall plug type Universal plug With screw No With collar No Application General type (screw head) Drilling diameter 6 mm n: FISCHER 62754 universal plug UX 6 x 35 without collar cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The nylon plug for all building materials. The fischer universal plug UX is a plastic plug made from high-quality nylon. The universal plug expands in solid building materials and knots in hollow and panel building materials for maximum hold. This makes the fischer UX always the right choice - even if the for unknown building materials. The edge prevents it from slipping deeper during installation. In the version without edge, and larger anchorage depths, the fischer universal plug UX is suitable for push-through installation. The fischer universal plug UX is recommended, for example, for fixing lighting, curtain rails, lightweight cupboards and skirting. The fixing sets with screws, eye screws and hooks provide the optimum solution for almost all applications. Plug holds in all building materials Plug expands in solid building materials Maximum hold in solid and hollow building materials due to knotting Optimum screw guidance due to slanting connection bridges Installation safety due to anti-rotation lock The universal operating principle (knotting or expanding) allows for use in all solid, hollow and board building materials. Thus the UX is the correct choice for unknown base materials The UX's angled connection ridges allow for optimum screw guidance. Serrated anti-rotation locks prevent rotation in the drill hole. This guarantees the greatest possible installation safety Fixing sets with screws, eye screws and hooks provide the right solution for all applications Suitable for The UX with rim is suitable for pre-positioned installation; the UX without rim is suitable for push-through installation Turning in the screw causes the UX to expand in the solid building material and to knot within the cavity The required screw length is given by the plug length + fixture thickness + 1 x screw diameter Suitable for wood and chipboard screws, as well as stud screws In the case of board building materials, the threadless part of the screw must not be longer than the fixture, and the UX with rim is to be used The edge distance must be at least one plug length Building materials Concrete Gypsum plasterboard and gypsum fibreboards Vertically perforated brick Hollow blocks made from lightweight concrete Cavity floor slabs made from bricks and concrete Perforated sand-lime brick Solid sand-lime brick Natural stone Aerated concrete Chipboard Solid panel made from gypsum Solid brick made from lightweight concrete Solid brick Application Pictures Lighting Skirting Light cabinets Towel rails Mirror cabinets Curtain rails Wash basin fixings TV consoles Plumbing and heating fixings ds: dsc: kts: universal plug UX 6 x 35 without collar kpn: 62754 kpn_dash: kpn_clear: 62754 bkpn: FISCHER 62754 bkpn_clear: FISCHER 62754 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 62754 sr_ns: FISCHER62754
r: 87030020 p: 1.4 pid: 75132 b: FISCHER q: 0 st: lt: 6 ean: 4006209504932 sr: FISCHER 50493 sr_no_br: 50493 sr_no_br_cl: 50493 sr_cl: FISCHER50493 sr_dash: sold: 392 p_range: none act: 1 avo: 1 av: Diameter (wall plug) - mm With screw No Drilling diameter 14 mm type (screw head) Application Aerated concrete Wall plug type Universal plug Material (wall plug) Polyamide (Nylon®) Drill hole depth 90 mm Length (Wall plug) 75 mm n: FISCHER 50493 aerated concrete plug GB 14 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The special plug for different fixings in aerated concrete. The fischer Aircrete anchor GB 14 is a special anchor for different fixings in aerated concrete. The GB, made from high-quality nylon, is hammered in rotary mode after pre-drilling. The characteristic outer ribs ensure an interlocking connection between the building material and anchor. The fischer Aircrete anchor GB is ideal for fixing façade and roof constructions as well as railings in aerated concrete. Building Authority approval for safety-relevant applications Optimum pressure distribution and high load-bearing capacity. Spiral outer ribs cut a positive fit in the aerated concrete No setting tool necessary: simply hammer in using the hammer Approved with the fischer safety screw The general building approval guarantees approved safety for use in safety-relevant applications The spiral-shaped outer ribs cut a positive fit in the soft building material, thus ensuring the best pressure distribution and load-bearing capacity Can be applied with a hammer - there is no need for special tools, thus saving time and money for the installation The GB can also be used safely outside (e. g. in façade installation) when combined with the approved fischer safety screw in A4 Suitable for The GB is suitable for pre-positioned installation The spiral-shaped outer ribs ensure a positive fit connection between the building material and anchor The required screw length is given by: Anchor length + fixture thickness + 1 x screw diameter The GB 10 must be used with fischer safety screws to fulfil the approval and to achieve the maximum load-bearing capacity Use rotary drilling to create the drill hole Can be used in unplastered aerated concrete Building materials Approved for (GB 10) resp. suitable for (GB 8 and GB 14): Aerated concrete >= PB2, PP2 Also suitable for: Aerated concrete and ceiling panels of compressive strength >= 3. 3 Application Light cable trays Pipelines Guard rails Façade and roof constructions made of wood and metal Light canopy brackets Letter boxes Trellis ds: dsc: kts: aerated concrete plug GB 14 kpn: 50493 kpn_dash: kpn_clear: 50493 bkpn: FISCHER 50493 bkpn_clear: FISCHER 50493 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 50493 sr_ns: FISCHER50493
r: 02062357 p: 0.84 pid: 20598 b: FISCHER q: 0 st: lt: 8 ean: 4006209503485 sr: FISCHER 50348 sr_no_br: 50348 sr_no_br_cl: 50348 sr_cl: FISCHER50348 sr_dash: sold: 378 p_range: none act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 10 mm Application General With collar Yes type (screw head) PZ3 Wall plug type Hammer-in plug Material (wall plug) Polyamide (Nylon®) Drill hole depth - mm Length (Wall plug) 160 mm n: FISCHER 50348 nail plug N 10 x 160/110 S with countersunk head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The hammer-in plug for simple, fast and economic installation. The fischer Hammerfix N-S with countersunk head consists of a high-quality nylon plug and a zinc-plated nail screw. These are already pre-fitted for quick assembly. The Hammerfix is led through the component in the time-saving through-type installation. When driving in the nail screw, the fixing sleeve expands and anchors itself securely in the building material. The fischer Hammerfix N-S with countersunk head is ideal for fixing timber constructions in all building materials in internal areas. Fast Hammerset installation saves time: ideal for series installation Simple and secure installation: Integrated hammer-in stop prevents premature anchor spreading Subsequent dismantling of the nail screw with a cross-slot recess is possible With countersunk head The rapid hammerset installation reduces the amount of time required and allows for an economic series installation The integrated hammer-in stop prevents the plug from expanding prematurely (jamming), thus enabling a problem-free installation Together with the cross-slot recess, the thread of the nail screw allows the screw to be removed, thus allowing for subsequent dismantling The wide range of diameters and usage lengths provides the correct plug for every fixing Suitable for Suitable for push-through installation When hammered in, the nail screw causes the plug to expand in two directions, thus providing a secure anchoring in the building material Countersunk head plugs are recommended for the installation of timber constructions; in the case of metal constructions, use flat-head plugs, and use pan-head plugs for long holes Building materials Concrete Solid sand-lime brick Building brick Natural stone Solid brick made from lightweight concrete Aerated concrete Solid panel made from gypsum Application Substructures made of wood Wall connection or plaster profiles Cable and pipe clips Perforated tapes ds: dsc: kts: nail plug N 10 x 160/110 S with countersunk head kpn: 50348 kpn_dash: kpn_clear: 50348 bkpn: FISCHER 50348 bkpn_clear: FISCHER 50348 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 50348 sr_ns: FISCHER50348
