r: 02951988 p: 3882.542 pid: 73426 b: FLUKE q: 0 st: lt: 8 ean: 0095969673952 sr: FLUKE 4353375 sr_no_br: 4353375 sr_no_br_cl: 4353375 sr_cl: FLUKE4353375 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721-3610 pressure calibrator with two sensors, 2.48 bar, 69 bar - 4353375 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721 precision pressure calibrator is the ideal instrument for gas transfer applications. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features The 721 can be configured by selecting a low-pressure sensor and then adding one of 7 high-pressure ranges. Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Measures signals from 4 to 20 mA Internal 24V loop power supply can supply a transmitter under test Measure up to 30 V DC, check 24V loop power supplies Extend pressure measuring range via connection to 700-series external pressure modules (29 ranges) Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: Scope of delivery Pressure calibrator with two sensors, 36 PSIG, 1000 PSIG Carrying case Four (4) AA batteries User manual Traceable calibration certificate Measurement leads kts: pressure calibrator with two sensors, 2.48 bar, 69 bar kpn: 721-3610 kpn_dash: 721 kpn_clear: 7213610 bkpn: FLUKE 721-3610 bkpn_clear: FLUKE 7213610 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353375 sr_ns: FLUKE4353375
r: 02957553 p: 3826.244 pid: 72156 b: FLUKE q: 0 st: lt: 8 ean: 0095969801973 sr: FLUKE 4706582 sr_no_br: 4706582 sr_no_br_cl: 4706582 sr_cl: FLUKE4706582 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1734/B three-phase energy logger (excl. current clamps) - 4706582 cn: ENERGY COST METER cn2: ENERGY COST METER cn_clear: ENERGYCOSTMETER d: Product description: The new Fluke 1732 and 1734 three-phase electrical Energy Loggers introduce a new easy way to find the sources of energy waste. Discover where and when energy is consumed within your installation, from the service input to individual circuits. Remotely view and share data with your team via the Fluke Connect app, allowing you to maintain safer working distances and make important decisions in real-time. This reduces the need for protective equipment, site visits and checks. Profiling energy consumption within your plant helps you identify energy saving opportunities and provides you with the data needed to take action. With the new Energy Analyze software package, you can compare multiple data points over a long period of time to get a complete picture of energy consumption. The first step towards reducing energy bills. Key features: Key measurement functions: Automatically measure and record voltage, current, power, power factor, energy and associated values Compatible with Fluke Connect: View data locally on the instrument, via the Fluke Connect mobile app and desktop software or via your building's Wi-Fi network Convenient instrument connection: The instrument is powered directly from the measured circuit Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III approved for service input and downstream circuits Measures all three phases: 3 flexible current clamps included Comprehensive log function: more than 20 individual log sessions can be stored on the instruments. All measured values are even recorded automatically so you never lose measurement trends. They can even be accessed during recording sessions and before downloading for real-time analysis Optimised user interface: quick, graphical settings for which additional information is available allow you to capture the right data every time, and the intelligent monitoring function ensures that the right connections have been made, reducing user uncertainty Bright colour touch screen: Useful analysis and checking of data can be done in the field, with full graphic display Optimised user interface: Always capture the right data with fast, guided graphical installation, and eliminate uncertainty about connections with the intelligent monitoring function Full on-site installation via front panel or Fluke Connect: No need to return to the workshop to download and install or to take a computer to the electrical distributor Fully integrated logging function: Connect other Fluke Connect tools to the Fluke 1734 to log two other measurement parameters at the same time. Choose from almost any parameter on a wireless digital multimeter or module with Fluke Connect* Application software Energy Analyze Plus: Download and analyse every detail of energy consumption using our automatic reports ds: dsc: Scope of delivery 1734 energy logger Power supply Voltage test cables Alligator clips (4x) Carrying case Energy Analyze Plus software Magnetic suspension strap Magnetic voltage probes (4x) Cables Colour coding set Documentation on USB memory kts: three-phase energy logger (excl. current clamps) kpn: 1734/B kpn_dash: kpn_clear: 1734B bkpn: FLUKE 1734/B bkpn_clear: FLUKE 1734B c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Energy cost meter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke energy cost meter sr_no_br_cl_ns: 4706582 sr_ns: FLUKE4706582
r: 02952194 p: 3813 pid: 71243 b: FLUKE q: 0 st: lt: 8 ean: 0095969769327 sr: FLUKE 4558658 sr_no_br: 4558658 sr_no_br_cl: 4558658 sr_cl: FLUKE4558658 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750P01EX pressure module (0 - 25 Mbar) - 4558658 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Product description: A complete range of pressure modules An assortment of 48 pressure modules can perform pressure calibrations from 0 to 1 inH20 to 10,000 psi (2.5 mBar to 690 bar). Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high-fitting versus the low-fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. Choice of: Differential pressure modules Overpressure modules High-pressure modules Absolute pressure modules Vacuum modules Modules with two measuring ranges Reference modules Key features: Precision pressure measurement for 75X and 720 series calibrators The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and with the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measuring models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum ds: dsc: kts: pressure module (0 - 25 Mbar) kpn: 750P01EX kpn_dash: kpn_clear: 750P01EX bkpn: FLUKE 750P01EX bkpn_clear: FLUKE 750P01EX c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4558658 sr_ns: FLUKE4558658
r: 02953740 p: 3760.743 pid: 71282 b: FLUKE q: 0 st: lt: 10 ean: 0095969666862 sr: FLUKE 4325170 sr_no_br: 4325170 sr_no_br_cl: 4325170 sr_cl: FLUKE4325170 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1623-2 KIT GEO earth diffusion resistance kit (incl. earth stake/cable, current clamp) - 4325170 cn: EARTH RESISTANCE TESTER cn2: EARTH RESISTANCE TESTER cn_clear: EARTHRESISTANCETESTER d: Product description: The Fluke 1623-2 GEO ground tester offers the ability to store and download data via the USB port. Top-class accessories ensure easy and fast measurement procedures. 3- and 4-pole potential loss and earth resistance measurements 4-pole ground resistance measurement Selective earth pin measurement with 1 current clamp Selective earth pin measurement with 2 current clamps IP56 classified for outdoor use Sturdy carrying case Data storage and transfer via USB The tester is also easy to use. For each measurement, the tester indicates which electrodes or current clamps should be connected. The large rotary switch can be used even when wearing gloves. Key features Electrode-less measurement The Fluke 1623-2 earth ground tester can measure loop resistances in grounding systems using only current clamps. In this testing method, two current clamps are placed around the earth pin and each current clamp is connected to the tester. No earth electrodes are used. One current clamp induces a known, fixed voltage and the current is then measured by the other current clamp. The tester then automatically determines the resistance of the earth pin. This measurement method only works if a connected earthing system is present for the building or structure being tested, but this is usually the case. If there is only one earth connection, as is the case in many homes, the electrodeless method does not provide an acceptable value and the potential loss test method should be used. An electrodeless measurement does not require the earthing pin to be disconnected. As a result, the connected earthing system remains intact during measurement. The time-consuming placing and connecting of electrodes for each earth pin on the system is a thing of the past; a significant time saver. You can also perform earthing tests in places that were previously out of the question, namely inside buildings, in high-voltage pylons and anywhere you do not have access to the ground. The most complete tester The Fluke 1623-2 is a unique earth ground tester that can take earth ground measurements in all four ways. 3- and 4-pole potential loss measurement (using electrodes) 4-pole ground resistance test (using electrodes) Selective test (using 1 current clamp and electrodes) Electrode-less test (using only 2 current clamps) ds: dsc: Scope of delivery GEO earthing tester User manual Batteries Quick guide USB cable 2 current clamps C1620 professional carrying case 4 earth electrodes 3 wire reels kts: GEO earth diffusion resistance kit (incl. earth stake/cable, current clamp) kpn: 1623-2 KIT kpn_dash: 1623 kpn_clear: 16232KIT bkpn: FLUKE 1623-2 KIT bkpn_clear: FLUKE 16232KIT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Earth resistance tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke earth resistance tester sr_no_br_cl_ns: 4325170 sr_ns: FLUKE4325170
r: 02953739 p: 3679.297 pid: 73486 b: FLUKE q: 0 st: lt: 10 ean: 0095969666855 sr: FLUKE 4325162 sr_no_br: 4325162 sr_no_br_cl: 4325162 sr_cl: FLUKE4325162 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1625-2 GEO earth dispersion resistance meter - 4325162 cn: EARTH RESISTANCE TESTER cn2: EARTH RESISTANCE TESTER cn_clear: EARTHRESISTANCETESTER d: Product description: The Fluke 1625-2 GEO ground tester offers the ability to store and download data via the USB port. Top-class accessories ensure simple and fast measurement procedures. 3- and 4-pole potential loss and earth resistance measurements 4-pole ground resistance measurement Selective earth pin measurement with 1 current clamp Selective earth pin measurement with 2 current clamps IP56 classified for outdoor use Sturdy carrying case Data storage and transfer via USB The tester is also easy to use. For each measurement, the tester indicates which electrodes or current clamps should be connected. The large rotary switch can be used even when wearing gloves. Key features Electrode-less measurement The Fluke 1625-2 earth ground tester can measure loop resistances in grounding systems using only current clamps. In this testing method, two current clamps are placed around the earth pin and each current clamp is connected to the tester. No earth electrodes are used. One current clamp induces a known, fixed voltage and the current is then measured by the other current clamp. The tester then automatically determines the resistance of the earth pin. This measurement method only works if a connected earthing system is present for the building or structure being tested, but this is usually the case. If there is only one earth connection, as is the case in many homes, the electrodeless method does not provide an acceptable value and the potential loss test method should be used. An electrodeless measurement does not require the earthing pin to be disconnected. As a result, the connected earthing system remains intact during measurement. The time-consuming placing and connecting of electrodes for each earth pin on the system is a thing of the past; a significant time saver. You can also perform earthing tests in places that were previously out of the question, namely inside buildings, in high-voltage pylons and anywhere you do not have access to the ground. The most complete tester The Fluke 1625-2 is a unique earth ground tester that can take earth ground measurements in all four ways: 3- and 4-pole potential loss measurement (using electrodes) 4-pole soil resistance test (using electrodes) Selective test (to be performed using 1 current clamp and earth pins) Electrodeless test (using only 2 current clamps) ds: dsc: Scope of delivery GEO earthing tester User manual Batteries Quick guide USB cable kts: GEO earth dispersion resistance meter kpn: 1625-2 kpn_dash: 1625 kpn_clear: 16252 bkpn: FLUKE 1625-2 bkpn_clear: FLUKE 16252 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Earth resistance tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke earth resistance tester sr_no_br_cl_ns: 4325162 sr_ns: FLUKE4325162
r: 03327873 p: 3507.502 pid: 166128 b: FLUKE q: 0 st: lt: 10 ean: 0195112125113 sr: FLUKE 5602648 sr_no_br: 5602648 sr_no_br_cl: 5602648 sr_cl: FLUKE5602648 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE FEV350/KIT SCH EV charging station analyser for type 1 and 2 connectors + 1664 multimeter in bag - 5602648 cn: TEST DEVICE cn2: TEST DEVICE cn_clear: TESTDEVICE d: Product description Complete solution for safety and performance testing of AC EV charging stations with type 2 or type 1 connectors Designed for technicians who need to perform and document multiple tests quickly and efficiently without carrying multiple tools Available measurements: PE (safety) ground test beforehand to ensure that no hazardous voltage is present, visual inspection, 30 mA ground fault switch + 6 mA RDC-DD trip test, rated voltage + phase sequence, automatic control pilot (CP) with waveform analysis, proximity pilot, and fault testing. Supported measurements: earth connection, insulation and loop/grid impedance with Fluke's compatible multifunction installation testers for installation certification/inspections via Bluetooth wireless connection. Wiring configuration diagrams and info screens for seamless integration with TruTest software for report generation. Includes TruTest EV charging software module for documentation and reporting. Provides predefined test plans and successful/failed indications for measurement results to simplify analysis and time spent on testing. ds: dsc: Scope of delivery FEV350/BASIC Test Analyzer FEV300-CON-TY1 Type 1 plug FEV300-CON-TY2 Type 2 plug Zero adjustment adapter/TY1 Zero adjustment adapter/TY2 TPAK Magnetic suspension clip Carrying case 1664 FC Multifunctional tester kts: EV charging station analyser for type 1 and 2 connectors + 1664 multimeter in bag kpn: FEV350/KIT SCH kpn_dash: kpn_clear: FEV350KITSCH bkpn: FLUKE FEV350/KIT SCH bkpn_clear: FLUKE FEV350KITSCH c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Test device | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke test device sr_no_br_cl_ns: 5602648 sr_ns: FLUKE5602648
r: 02951458 p: 3473.404 pid: 72623 b: FLUKE q: 0 st: lt: 10 ean: 0095969815048 sr: FLUKE 4755975 sr_no_br: 4755975 sr_no_br_cl: 4755975 sr_cl: FLUKE4755975 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 124B/EU/S industrial scopemeter 40MHZ (incl. SCC kit) - 4755975 cn: OSCILLOSCOPE cn2: OSCILLOSCOPE cn_clear: OSCILLOSCOPE d: Product description: Fluke 120B industrial ScopeMeter series handheld oscilloscopes Simpler testing, more insight and faster troubleshooting of electromechanical equipment The compact ScopeMeter Series 120B is the rugged oscilloscope solution for troubleshooting and maintenance of industrial electrical and electro-mechanical equipment. It is a truly integrated tester, with oscilloscope, multimeter and high-speed recorder in one easy-to-use instrument. The ScopeMeter Series 120B can also be integrated wirelessly with the Fluke Connect Mobile App and with the FlukeView software for ScopeMeter, to enable greater collaboration, data analysis and archiving of critical test data. Key features The 120B series of ScopeMeter industrial test tools offer innovative features designed to help technicians find faults faster and get the information they need to keep their systems operational. Display waveforms with Connect-and-View technology for triggering and setting, and automatically view related numeric readings with Fluke IntellaSet technology, all without making manual adjustments. Recorder Event Detect capabilities record and log hard-to-find intermittent events for easy viewing and analysis.[S][0] Digital two-channel oscilloscope and multimeter 40 MHz or 20 MHz oscilloscope bandwidth Two digital true-RMS multimeters with 5,000 counts Connect-and-View triggering for easy hands-free operation IntellaSet technology automatically and intelligently adjusts the numerical readout based on the measured signal Dual-channel recorder for waveform and measured values to establish a trend of data over long periods of time Recorder Event Detect records hard-to-find intermittent signals on repeating waveforms up to 4 kHz Shielded test leads for oscilloscope, resistance and continuity measurements Perform resistance measurements, call-through and diode tests and capacitance measurements Power measurements (W, VA, VAR, PF, DPF, Hz) Harmonics in voltage, current and power Check with BusHealth the physical layer of industrial networks against defined reference levels Store or recall instrument data and settings Save instrument settings defined by a test set for routine maintenance or as most commonly used test procedures. External optically isolated USB interface to send, archive and analyse scope or measurement data Optional WiFi adapter connectable to internal USB port to wirelessly send information to PC, laptop or Fluke Connect Mobile App* FlukeView ScopeMeter software for Windows Rugged design to withstand vibration of 3g and shock of 30g and with protection class IP51 according to EN/IEC60529 Industry's highest safety specification: meets safety specification for CAT IV 600 V Rechargeable Li-ion battery, seven hours of battery power (with a four-hour charge time) ds: dsc: Scope of delivery Fluke 124B handheld oscilloscope Shielded test leads with black earth leads Measure lead black (for grounding) Hook terminals (red, blue) Adapter from banana plug to BNC (black, 2x) 10:1 voltage measuring probe Angled USB adapter WiFi USB adapter* Switching power supply, adapter/battery charger Rechargeable Li-ion battery pack Carrying case Magnetic hanging clip FlukeView ScopeMeter software for Windows Screen saver kts: industrial scopemeter 40MHZ (incl. SCC kit) kpn: 124B/EU/S kpn_dash: kpn_clear: 124BEUS bkpn: FLUKE 124B/EU/S bkpn_clear: FLUKE 124BEUS c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Oscilloscope | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke oscilloscope sr_no_br_cl_ns: 4755975 sr_ns: FLUKE4755975
r: 03392951 p: 3459.325 pid: 178064 b: FLUKE q: 0 st: lt: 8 ean: 0195112148877 sr: FLUKE 6093300 sr_no_br: 6093300 sr_no_br_cl: 6093300 sr_cl: FLUKE6093300 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1674 FC SCH/FEV300 multifunctional installation tester with test adapter set for EV charging stations - 6093300 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description Simple bidirectional user interface eliminates complex multi-level menus Easy installation with the colour touch screen, smart device or a PC Fast and accurate testing with automatic test and automatic measurement validation Fluke Connect compatibility eliminates the need for data entry View results and generate certificates on-site with Fluke TruTest-software (not included) The Fluke 1674 FC comes with a patented Insulation PreTest, allowing you to better protect the installation and avoid costly errors. If the tester detects that devices are connected to the system during the test, the insulation test is stopped and a visible and audible warning is activated. This helps prevent accidental damage to peripheral devices and saves you time and money. Key features Field-updatable - you can apply regulatory changes or improvements to the tester in the field. Compact, lightweight (less than 1.6 kg) and with padded neck strap leaving your hands free. Colour touch screen and rotary knob for quick navigation, without complex multi-level menus. Rechargeable 2,500 mAh Li-ion battery for all-day testing. Standard USB-C charging port with fast charging support for convenient charging on the go. Newly designed professional carrying case for transporting and protecting your installation tester and accessories. Additional high-current loop mode allowing faster measurements than with non-trip loop tests for circuits protected by residual current devices. Insulation monitoring devices (IMD) testing. Surge protection device (SPD) functional test. Voltage drop measurement function. Z-max memory for loop tests for easy evaluation of the highest loop test value. Unique zeroing adapter for fast, reliable and accurate compensation for measurement and mains cables. Simultaneous voltage measurements between L-N, L-PE and N-PE using the power cord. This does not require changing the measurement connections. Simultaneously measure tripping time and tripping current of RCCBs (RCCB type AC, A, B, F and GFCI). Measures PEFC or PSC and loop impedance simultaneously and displays them on the dual screen. Ring tests allow you to select the required input connections without having to exchange test leads. Pass-through test with low test current (10 mA) to measure motor windings. The earth potential touch pad detects elevated earth potentials above 50 V and alerts you to potentially dangerous situations. ds: dsc: Scope of delivery Multifunctional installation tester FEV300 test adapter set for EV charging stations Heavy-duty power cord with a single input connector Carrying case USB-C power adapter for charging Probe for remote measurements Carrying strap Zeroing adapter Measurement leads and probes Alligator clips Li-Ion battery kts: multifunctional installation tester with test adapter set for EV charging stations kpn: 1674 FC SCH/FEV300 kpn_dash: kpn_clear: 1674FCSCHFEV300 bkpn: FLUKE 1674 FC SCH/FEV300 bkpn_clear: FLUKE 1674FCSCHFEV300 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 6093300 sr_ns: FLUKE6093300
r: 02952186 p: 3420 pid: 71442 b: FLUKE q: 0 st: lt: 8 ean: 0095969673716 sr: FLUKE 4352691 sr_no_br: 4352691 sr_no_br_cl: 4352691 sr_cl: FLUKE4352691 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750R31 pressure module (0 - 700 bar) - 4352691 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, 0 psi to 10000 psi (0 to 700 bar), (0 to 70 MPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (0 - 700 bar) kpn: 750R31 kpn_dash: kpn_clear: 750R31 bkpn: FLUKE 750R31 bkpn_clear: FLUKE 750R31 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352691 sr_ns: FLUKE4352691
r: 02952185 p: 3420 pid: 72114 b: FLUKE q: 0 st: lt: 8 ean: 0095969673709 sr: FLUKE 4352684 sr_no_br: 4352684 sr_no_br_cl: 4352684 sr_cl: FLUKE4352684 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750R30 pressure module (0 - 340 bar) - 4352684 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, 0 psi to 5000 psi (0 to 340 bar), (0 to 34 MPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (0 - 340 bar) kpn: 750R30 kpn_dash: kpn_clear: 750R30 bkpn: FLUKE 750R30 bkpn_clear: FLUKE 750R30 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352684 sr_ns: FLUKE4352684
r: 02952184 p: 3420 pid: 72112 b: FLUKE q: 0 st: lt: 8 ean: 0095969673693 sr: FLUKE 4352678 sr_no_br: 4352678 sr_no_br_cl: 4352678 sr_cl: FLUKE4352678 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750R29 pressure module (0 - 200 bar) - 4352678 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, 0 psi to 3000 psi (0 to 200 bar), (0 to 20 MPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (0 - 200 bar) kpn: 750R29 kpn_dash: kpn_clear: 750R29 bkpn: FLUKE 750R29 bkpn_clear: FLUKE 750R29 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352678 sr_ns: FLUKE4352678
r: 08107071 p: 3415 pid: 73494 b: FLUKE q: 0 st: lt: 8 ean: 0095969872959 sr: FLUKE 4991049 sr_no_br: 4991049 sr_no_br_cl: 4991049 sr_cl: FLUKE4991049 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 710 mA loop calibrator for valve testing with HART - 4991049 cn: LOOP CALIBRATOR cn2: LOOP CALIBRATOR cn_clear: LOOPCALIBRATOR d: Product description Key valve test functions include pre-configured valve signature test, speed test, step test, manual test and bump/partial stroke test Key mA loop calibration functions include mA generate, mA simulate, mA read, mA read/loop power and voltage read. The ValveTrack software allows data to be uploaded to a PC for further analysis of valve measurements logged and recorded in the 710's memory Testing valves easier than ever The Fluke 710 loop calibrator for valve testing is designed for quick and easy testing of control valves with HART technology. The 710's integrated test procedures and intuitive user interface allow users to test valves quickly and easily. In addition, the quick test results provide a clear diagnosis for quick maintenance decisions. Based on the results of the quick valve test, you know whether your valve is in good, marginal or poor condition, so you can quickly decide whether additional maintenance is required. Valve testing and HART communication with a precision loop calibrator The integrated HART communication function of the 710 loop calibrator for valve testing allows users to generate a 4-20 mA signal that controls the smart control valve. At the same time, the HART feedback signal is interpreted to determine whether the valve moves to the expected position. In addition to valve position information, the HART communication protocol can be used to determine the pressure delivered by the valve that moves the valve. The 710 provides integrated test procedures that automatically increase and change the mA signal while monitoring HART feedback on the valve position and pressure. This gives you a better picture of the valve's condition at the simple touch of a button. Preconfigured valve tests, concise answers Valve testing functions integrated into the 710 include Manual testing; manual modification of the mA signal and information on the HART position and pressure variable Increase of the mA signal over the full range from 4 to 20 to 4 mA during registration of the 0-100-0% position or of the pressures that move the valve from 0-100-0% Step change of the mA signal at the input of the valve and evaluation of the response of the valve to changes in the mA input signal Velocity tests to determine how fast the valve can be opened and closed Impact and partial stroke tests that help test valves over part of their range so they can be tested during an actual process ValveTrack software allows further analysis and trends to be created Valve tests logged and stored in the 710's memory can be uploaded using the ValveTrack analysis software.The ValveTrack software provides you with the following capabilities Uploading, printing and plotting of logged on-site valve tests performed Comparison of previously uploaded tests with recent tests Display of valve test history via HART label ID Export valve test data to CSV for further analysis in Microsoft Excel Save time, get answers On-site logging of HART data. After logging by the 710 on-site, the ValveTrack software can upload the HART configuration of up to 20 HART devices in your installation and output data in .csv or in .txt format. Logged mA loop measurements and HART data from a given transmitter can be logged for the purpose of troubleshooting and fine-tuning the loop. The data logging function has a selectable recording interval from 1 to 60 seconds and a logging capacity of 4910 records or 99 individual sessions. Each record contains the mA measurement and all four process variables. Main product features Test procedures rated Good, Marginal or Poor for control valves Generic HART communication Highest-in-class accuracy of 0.01% of measurement or source value Compact rugged design Intuitive user interface with 'Quick-Set' button for quick set-up and user-friendliness 24 V DC loop power supply with mA measurement mode (-25% to 125%) Resolution of 1 µA in mA ranges and 1 mV in voltage ranges Built-in selectable 250Ohm resistor for HART communication Simple two-wire connection for all measurements Automatic shutdown for longer battery life Variable step and rise time in seconds. HART communication The Fluke 710 has a built-in HART modem for communication that supports the following HART commands Read PV (primary variable) information from sensor Read information about PV output Read out and write PV unit type, tag ID name, descriptor and message Read out and write ranges for the primary variables (upper and lower range values) Activating or deactivating fixed current mode Setting zero point shift Setting zero point DAC (mA output 4 mA) Set gain DAC (mA output 20 mA) HART commands for valves The 710 provides the following unique HART commands for control valves: Automatic adjustment of the valve controller ds: dsc: Scope of delivery Set of stackable measuring leads Set of alligator clips with extra long teeth TP220 measuring probes AC280 SureGrip hook terminals Lemo to USB upload/download cable ValveTrack software (free download) Carrying case Six AAA batteries (installed) 709/709H/710 user manual on CD-ROM 709/709H/710 Quick Start Guide 709/709H/710 Safety information kts: mA loop calibrator for valve testing with HART kpn: 710 kpn_dash: kpn_clear: 710 bkpn: FLUKE 710 bkpn_clear: FLUKE 710 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Loop calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke loop calibrator sr_no_br_cl_ns: 4991049 sr_ns: FLUKE4991049
r: 02958266 p: 3371 pid: 72919 b: FLUKE q: 0 st: lt: 8 ean: 0095969344272 sr: FLUKE 2577159 sr_no_br: 2577159 sr_no_br_cl: 2577159 sr_cl: FLUKE2577159 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Accessory/Part type Transformer n: FLUKE EI-162BN split-coret transformer 320mm - 2577159 cn: ACCESSORIES/PART MEASURING TOOL cn2: ACCESSORIES/PART MEASURING TOOL cn_clear: ACCESSORIESPARTMEASURINGTOOL d: Product description: Used as a current clamp for selective earth loop resistance measurements around high-voltage pylons. Inside diameter of the current clamp is 320 mm (12.6 inches). Split-coret transformer included. This split-core transformer can be used in combination with set 1625 or set 1623. In case of an instrument that is not part of a set, the GEOX pro cord must be purchased separately. Key features External dimensions (L x W x H): 46 x 36 x 16 cm (20.5 x 16 x 17.2 inches) Weight: 8 kg (17.6 lbs) ds: dsc: kts: split-coret transformer 320mm kpn: EI-162BN kpn_dash: EI kpn_clear: EI162BN bkpn: FLUKE EI-162BN bkpn_clear: FLUKE EI162BN c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Accessories/part measuring tool | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke accessories/part measuring tool sr_no_br_cl_ns: 2577159 sr_ns: FLUKE2577159
r: 02957551 p: 3366.285 pid: 72871 b: FLUKE q: 0 st: lt: 8 ean: 0095969801966 sr: FLUKE 4706566 sr_no_br: 4706566 sr_no_br_cl: 4706566 sr_cl: FLUKE4706566 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1732/B three-phase energy logger (excl. current clamps) - 4706566 cn: ENERGY COST METER cn2: ENERGY COST METER cn_clear: ENERGYCOSTMETER d: Product description: The new Fluke 1732 and 1734 three-phase electrical Energy Loggers introduce a new easy way to find the sources of energy waste. Discover where and when energy is consumed within your installation, from the service input to individual circuits. Remotely view and share data with your team via the Fluke Connect app, allowing you to maintain safer working distances and make important decisions in real-time. This reduces the need for protective equipment, site visits and checks. Profiling energy consumption within your plant helps you identify energy saving opportunities and provides you with the data needed to take action. With the new Energy Analyze software package, you can compare multiple data points over a long period of time to get a complete picture of energy consumption. The first step towards reducing energy bills. Key features: Key measurement functions: Automatically measure and record voltage, current, power, power factor, energy and associated values Compatible with Fluke Connect: View data locally on the instrument, via the Fluke Connect mobile app and desktop software or via your building's Wi-Fi network Convenient instrument connection: The instrument is powered directly from the measured circuit Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III approved for service input and downstream circuits Measures all three phases: 3 flexible current clamps included Comprehensive log function: more than 20 individual log sessions can be stored on the instruments. All measured values are even recorded automatically so you never lose measurement trends. They can even be accessed during recording sessions and before downloading for real-time analysis Optimised user interface: quick, graphical settings for which additional information is available allow you to capture the right data every time, and the intelligent monitoring function ensures that the right connections have been made, reducing user uncertainty Bright colour touch screen: Useful analysis and checking of data can be done in the field, with full graphic display Optimised user interface: Always capture the right data with fast, guided graphical installation, and eliminate uncertainty about connections with the intelligent monitoring function Full on-site installation via front panel or Fluke Connect: No need to return to the workshop to download and install or to take a computer to the electrical distributor Fully integrated logging function: Connect other Fluke Connect tools to the Fluke 1734 to log two other measurement parameters at the same time. Choose from almost any parameter on a wireless digital multimeter or module with Fluke Connect* Application software Energy Analyze Plus: Download and analyse every detail of energy consumption using our automatic reports ds: dsc: Scope of delivery 1732 energy logger Power supply Voltage test cables Alligator clips (4x) Carrying case Energy Analyze Plus software Cables Colour coding set Documentation on USB memory kts: three-phase energy logger (excl. current clamps) kpn: 1732/B kpn_dash: kpn_clear: 1732B bkpn: FLUKE 1732/B bkpn_clear: FLUKE 1732B c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Energy cost meter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke energy cost meter sr_no_br_cl_ns: 4706566 sr_ns: FLUKE4706566
r: 02952106 p: 3246 pid: 71413 b: FLUKE q: 0 st: lt: 8 ean: 0095969673426 sr: FLUKE 4352403 sr_no_br: 4352403 sr_no_br_cl: 4352403 sr_cl: FLUKE4352403 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750P29 pressure module (0 - 200 bar) - 4352403 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, 0 psi to 3000 psi (0 to 200 bar), (0 to 20 MPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (0 - 200 bar) kpn: 750P29 kpn_dash: kpn_clear: 750P29 bkpn: FLUKE 750P29 bkpn_clear: FLUKE 750P29 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352403 sr_ns: FLUKE4352403
r: 03343213 p: 3180.978 pid: 166132 b: FLUKE q: 0 st: lt: 10 ean: 0195112119631 sr: FLUKE 5581087 sr_no_br: 5581087 sr_no_br_cl: 5581087 sr_cl: FLUKE5581087 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1674 FC SCH FTT multifunctional installation tester with TruTest software bundle in case - 5581087 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description Simple bidirectional user interface eliminates complex multi-level menus Easy installation with the colour touch screen, smart device or a PC Fast and accurate testing with automatic test and automatic measurement validation Fluke Connect compatibility eliminates the need for data entry View results and generate certificates on-site with Fluke TruTest- software The Fluke 1674 FC multifunction installation tester with the TruTest software bundle will revolutionise the way you work. The 1674 FC has all the features of the 1673 FC and also features insulation pre-testing, programmable automatic testing, surge protector testing and insulation monitoring device testing. With its ergonomic design, seamless user interface, integrated data management capabilities, wireless connectivity and comprehensive reporting software, the 1674 FC sets the new standard as an integrated installation testing solution. With the 1670-series installation testers, you can check the safety of electrical installations in residential, commercial and industrial applications and comply with IEC 60364 requirements and all relevant local standards of IEC 61557. Perform your required tests up to 30% faster and reduce the time spent on documentation by up to 50%, all with full confidence in the data you collect. Fluke 1670-series multifunction installation testers streamline your installation and test preparations with the help of the intuitive user interface and high-resolution colour touchscreen. You can enter site information and set test routes directly from the tester, your mobile device or from a PC, and as you test you can edit this information directly on the instrument, ensuring accurate data. ds: dsc: Scope of delivery Multifunctional installation tester Heavy-duty power cord with single input connector Carrying case USB-C power adapter for charging TP165X probe for remote measurements Carrying strap Zeroing adapter Measurement leads and probes Alligator clips Li-Ion battery Fluke TruTest software kts: multifunctional installation tester with TruTest software bundle in case kpn: 1674 FC SCH FTT kpn_dash: kpn_clear: 1674FCSCHFTT bkpn: FLUKE 1674 FC SCH FTT bkpn_clear: FLUKE 1674FCSCHFTT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 5581087 sr_ns: FLUKE5581087
r: 02952108 p: 3148.595 pid: 72103 b: FLUKE q: 0 st: lt: 8 ean: 0095969673440 sr: FLUKE 4352426 sr_no_br: 4352426 sr_no_br_cl: 4352426 sr_cl: FLUKE4352426 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750P31 pressure module (0 - 700 bar) - 4352426 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, 0 psi to 10000 psi (0 to 700 bar), (0 to 70 MPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (0 - 700 bar) kpn: 750P31 kpn_dash: kpn_clear: 750P31 bkpn: FLUKE 750P31 bkpn_clear: FLUKE 750P31 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352426 sr_ns: FLUKE4352426
