Product description
- PFERD wheel brush slim crimped RBU dia. 200x16xvariable hole ceramic filament dia. 1.10mm grit 120
Characteristics
- Brushes with ceramic oxide grain (CO) offer good toughness and excellent sharpness
- For high stock removal values and aggressive brushing behaviour
- Plastic filament withstands temperatures up to 220 °C
- Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces
Advantages:
- Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter.
- The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved.
- Highly flexible, enabling optimal adjustment to the workpiece contour.
- Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.
Key features according to our expert
-
Brush diameter: 200 mm
-
Connection type (machine): Bore
-
Material (brush filament): Plastic
-
Wire thickness: 1,1 mm
-
Twisted: No
-
Thickness: 16 mm
-
Max. no-load speed: 4500 rpm
-
Connection size (machine): 22,2 mm
Specifications / All features
-
Brand:
PFERD
-
03180377
-
EAN:
4007220837283
-
Supplier number:
PFERD 43506011
- Brush diameter
- 200 mm
- Connection type (machine)
- Bore
- Material (brush filament)
- Plastic
- Wire thickness
- 1,1 mm
- Twisted
- No
- Thickness
- 16 mm
- Max. no-load speed
- 4500 rpm
- Connection size (machine)
- 22,2 mm
- Filling material
- Ceramic grit (CO)
- Grit size
- 120
- Processing tasks
- Cleaning
- Workable materials 12
- Steel grades with hardness > 54 HRC
- ø shaft hole
- 22.2
- Length, trim
- 38
- Processing tasks 1
- Deburring
- Workable materials 14
- Titanium
- Max. rpm
- 4500
- ø outside metric
- 200
- Workable materials 3
- Cast steel
- Workable materials 5
- Non-ferrous metal hard
- Workable materials 7
- Nickel-based alloys (e.g. Inconel and Hastelloy)
- Workable materials 10
- soft titanium alloys (tensile strength 500 N/mm²)
- ø topping material
- 1.1
- Rpm, opt., to
- 2900
- Workable materials 1
- Bronze
- Workable materials 8
- Nickel- or titanium-based superalloys
- Workable materials 9
- Other non-ferrous metals
- Workable materials 6
- Heat-resistant materials
- Workable materials
- Aluminium
- Workable materials 2
- Cast iron
- Workable materials 4
- Cobalt-based alloys
- Processing tasks 2
- Texturing (matting, seamless matting and satin)
- Workable materials 11
- Steel, cast steel
- Workable materials 15
- Titanium alloys
- Recording system
- Shaft hole
- ø shaft hole, max.
- 31.8
- Workable materials 13
- Steel up to 1,200 N/mm² (< 38 HRC)
- Width metric
- 16
- Rpm, opt., of
- 1800
