r: 03203996 p: 85.289 pid: 154953 b: TEC7 q: 0 st: lt: 6 ean: 5414195011737 sr: TEC7 602060000 sr_no_br: 602060000 sr_no_br_cl: 602060000 sr_cl: TEC7602060000 sr_dash: sold: 2046.936 p_range: none type: standard act: 1 avo: 1 av: Net volume 4,4 l ADR packing group ADR class UN number EUH-statements EUH208 Physical state Solid Flash point 64 °C n: TEC7 WP7-402 wall injection cream "Stop Rising Moisture" (3 x 550 ml sausages) - 602060000 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description WALL INJECTION CREAM Water-repellent barrier in walls Easy application without waste, gun or pressure Even for walls with 95% moisture content Safe, solvent-free and odourless This final solution against rising damp forms a water-repellent, horizontal barrier in walls For all types of brick and rapid construction brick, even hollow ones Can be used as a joint sealant in solid natural stone walls Applicable inside and outside WTCB AAA+ Instructions Remove skirting boards, cover plates of sockets and all plastering up to 25 cm above the visible moisture attack or salt efflorescence Drill a 12 mm diameter hole every 10 cm. The depth is the wall thickness minus 5 cm For fastest effectiveness, drill into the lowest horizontal cement joint, above the ground surface outside Inject double walls and walls thicker than 40 cm inside and outside at the same height For very porous stone such as sandstone, ironstone or some types of limestone: it is best to also inject the stone itself. Follow the lowest joint in natural stone. If there is an old water barrier, drill below that level Drill several star-shaped holes in corners for complete impregnation Remove all drilling dust from the holes Screw the injection hose onto the sausage. Insert the hose into the drill holes to the back and fill with a slow retreating motion Leave the last cm unfilled Seal the holes with Tec7 Filler After a few days to weeks (depending on how dry the wall is) a +/- 10 cm thick water-repellent layer will have been formed across the entire width of the wall. The wall will take longer to dry, depending on the thickness of the wall, the weather conditions and the moisture content If necessary, measure the evolution with a moisture meter If the walls do not dry, or stains appear at normal humidity, there is heavy salt stress. This can be remedied by a wall treatment with WP7-501 Wall + Basement Waterproofing Penetrating driving rain that prevents drying can be remedied by facade treatment with WP7- 401 Facade Waterproof Wait to finish until the walls are thoroughly dry. Good ventilation promotes the drying process. Wait at least two weeks before installing a construction dryer if necessary Do not install a retaining wall to prevent moisture problems in the form of corrosion, deterioration of the walls and severe mould or occurrence of house fungus ds: dsc: kts: wall injection cream "Stop Rising Moisture" (3 x 550 ml sausages) kpn: WP7-402 kpn_dash: WP7 kpn_clear: WP7402 bkpn: TEC7 WP7-402 bkpn_clear: TEC7 WP7402 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 sealant sr_no_br_cl_ns: 602060000 sr_ns: TEC7602060000
r: 02956385 p: 4.57 pid: 155299 b: TEC7 q: 0 st: lt: 6 ean: 5414195005392 sr: TEC7 528100000 sr_no_br: 528100000 sr_no_br_cl: 528100000 sr_cl: TEC7528100000 sr_dash: sold: 1151.64 p_range: none type: standard act: 1 avo: 1 av: ADR packing group ADR class UN number EUH-statements EUH208 Physical state Solid Flash point > 150 °C Packaging Cartridge Net volume 310 ml n: TEC7 Tecryl professional painting sealant for filling and joints white paintable (310 ml) - 528100000 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description PROFESSIONAL PAINTING SEALANT Tec7-quality acrylic sealant Almost odourless Easy to finish Paintable after 1 hour Compatible with all paints and lacquers Highly resistant to moisture and condensation Safe on all building materials Tecryl is a professional acrylic sealant for sealing and filling all building materials The formulation guarantees a perfect finish with all types of paint, stain or varnish: with little or no risk of reactions such as paint cracking or discolouration Tecryl cures to a plastic consistency that perfectly follows the expansion and movement of the substrate, but does not dissolve or crack Instructions Apply to clean and dry to slightly moist substrate Spread dry or wet with spatula Can be repainted after 1 hour, depending on temperature and humidity. Remove any protective tape before skin formation to prevent damage to it Use X-Seal for expansion joints Improve adhesion and strengthen weak substrates such as aerated concrete or plaster by coating with diluted Tecryl (2 parts water to 1 part Tecryl) Test the adhesion on plastics, powder paints, exotic woods, bluestone And bituminous materials The perfect joint is as deep as it is wide (from 5 to 10 mm) The drying time depends on: the temperature of the product, the temperature of the environment, the temperature of the substrate, the layer thickness, the humidity of the substrate Do not use as glass sealant or as adhesive sealant. Not suitable for joints with standing water or with immersion Use XealPro as a sealant for wet joints in showers, baths and sanitary rooms ds: dsc: kts: professional painting sealant for filling and joints white paintable (310 ml) kpn: Tecryl kpn_dash: kpn_clear: Tecryl bkpn: TEC7 Tecryl bkpn_clear: TEC7 Tecryl c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 528100000 sr_ns: TEC7528100000
r: 02960643 p: 4.57 pid: 156159 b: TEC7 q: 0 st: lt: 3 ean: 5414195503201 sr: TEC7 539503000 sr_no_br: 539503000 sr_no_br_cl: 539503000 sr_cl: TEC7539503000 sr_dash: sold: 164.52 p_range: none type: standard act: 1 avo: 1 av: Net volume 50 ml ADR packing group ADR class UN number EUH-statements EUH208 Physical state Solid n: TEC7 Trans Clear universal sealant transparent (50 ml tube) - 539503000 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description TRANSPARENT UNIVERSAL SEALANT Also adheres to wet substrates Mould- and bacteria-resistant Super strong and permanently elastic after rapid curing Free of solvents and isocyanates Safe on mirrors, no marking on natural stone Almost odourless Also on damp, smooth surfaces Mould- and bacteria-resistant Water- and airtight Can be used on most building materials Instructions Processing temperature between +5°C and +40°C Apply on clean, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 polymers. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (best with telescopic piston) Due to the wide variety of different plastics and compositions, as well as materials prone to stress corrosion, preliminary tests are recommended Test adhesion to plastics, powdered paints, exotic woods and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer Due to the variety of lacquers and paints on the market, testing is recommended. The use of alkyd resin-based products may delay the drying process For mirror bonding in sanitary areas, only apply vertical glue strips to avoid stagnant moisture due to condensation Ideal adhesive thickness for optimal bonding strength: 3 mm ds: dsc: kts: universal sealant transparent (50 ml tube) kpn: Trans Clear kpn_dash: kpn_clear: TransClear bkpn: TEC7 Trans Clear bkpn_clear: TEC7 TransClear c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 539503000 sr_ns: TEC7539503000
r: 03203995 p: 50.578 pid: 155416 b: TEC7 q: 0 st: lt: 5 ean: 5414195011683 sr: TEC7 602205000 sr_no_br: 602205000 sr_no_br_cl: 602205000 sr_cl: TEC7602205000 sr_dash: sold: 101.156 p_range: none type: standard act: 1 avo: 1 av: Net volume 4,4 l EUH-statements EUH066 ADR packing group ADR class Principal hazard property GHS02 Flammable UN number Conseils de prudence (P) P101; P102; P210; P271; P280; P303 + P361 + P353; P304 + P340; P405; P501 H-statements H226; H336; H412 Hazard class GHS02 Flammable; GHS07 Harmful or irritant Physical state Liquid Flash point < 61 °C n: TEC7 WP7-301 repair paste for roofing waterproofing (4.4l pot) - 602205000 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description REPAIR PASTE FOR ROOFING ROOFS Cold repair of leaks, cracks and blisters With rubber for long-lasting flexibility With bitumen for perfect sealing With fibres for lasting strength Ready for use and easy to spread Applicable on wet and dry surfaces, also vertically, and immediately waterproof and rainproof Adheres to most building materials and is compatible with all bituminous materials Can be finished with slate chippings for extra UV protection and walkability Instructions Apply to clean and stable substrate, free of ice or snow If necessary, clean and dry (without heating), remove loose parts and hardened bitumen, blisters in roof lining cut open in cross shape Reinforce large repairs with pieces of roofing or fibreglass tape Apply with sealant gun, brush or spatula Finish and clean tools with Tec7 Cleaner Do not use in ponds or watercourses, or on roofs that drain into ponds Layer thickness 2 mm, for grouting slate chippings, 1 mm thickness is sufficient 1 litre = 1 mm on 1m² ds: dsc: kts: repair paste for roofing waterproofing (4.4l pot) kpn: WP7-301 kpn_dash: WP7 kpn_clear: WP7301 bkpn: TEC7 WP7-301 bkpn_clear: TEC7 WP7301 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 602205000 sr_ns: TEC7602205000
r: 03203993 p: 6.98 pid: 154958 b: TEC7 q: 11 st: 1 lt: 1 ean: 5414195011577 sr: TEC7 602150000 sr_no_br: 602150000 sr_no_br_cl: 602150000 sr_cl: TEC7602150000 sr_dash: sold: 55.84 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml EUH-statements EUH066 Relative density 1,12 ADR packing group ADR class UN number Principal hazard property GHS02 Flammable Conseils de prudence (P) P101; P102; P210; P271; P280; P303 + P361 + P353; P304 + P340; P405; P501 H-statements H226; H336; H412 Hazard class GHS02 Flammable; GHS07 Harmful or irritant Physical state Liquid Flash point < 61 °C Packaging Cartridge Color Black n: TEC7 WP7-301 repair paste for roofing waterproofing (310 ml cartridge) - 602150000 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description REPAIR PASTE FOR ROOFING ROOFS Cold repair of leaks, cracks and blisters With rubber for long-lasting flexibility With bitumen for perfect sealing With fibres for lasting strength Ready for use and easy to spread Applicable on wet and dry surfaces, also vertically, and immediately waterproof and rainproof Adheres to most building materials and is compatible with all bituminous materials Can be finished with slate chippings for extra UV protection and walkability Instructions Apply to clean and stable substrate, free of ice or snow If necessary, clean and dry (without heating), remove loose parts and hardened bitumen, blisters in roof lining cut open in cross shape Reinforce large repairs with pieces of roofing or fibreglass tape Apply with sealant gun, brush or spatula Finish and clean tools with Tec7 Cleaner Do not use in ponds or watercourses, or on roofs that drain into ponds Layer thickness 2 mm, for grouting slate chippings, 1 mm thickness is sufficient 1 litre = 1 mm on 1m² ds: dsc: kts: repair paste for roofing waterproofing (310 ml cartridge) kpn: WP7-301 kpn_dash: WP7 kpn_clear: WP7301 bkpn: TEC7 WP7-301 bkpn_clear: TEC7 WP7301 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 602150000 sr_ns: TEC7602150000
r: 03311147 p: 13.553 pid: 178018 b: TEC7 q: 0 st: lt: 6 ean: 5414195021484 sr: TEC7 602206000 sr_no_br: 602206000 sr_no_br_cl: 602206000 sr_cl: TEC7602206000 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 870 ml EUH-statements EUH066 ADR packing group ADR class Color Black Principal hazard property GHS02 Flammable UN number Conseils de prudence (P) P101; P102; P210; P271; P280; P303 + P361 + P353; P304 + P340; P405; P501 H-statements H226; H336; H412 Hazard class GHS02 Flammable; GHS07 Harmful or irritant Physical state Liquid Flash point < 61 °C n: TEC7 WP7-301 roofing waterproof black 870 ml pot - 602206000 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description REPAIR PASTE FOR ROOFING ROOFS Cold repair of leaks, cracks and blisters With rubber for long-lasting flexibility With bitumen for perfect sealing With fibres for lasting strength Ready for use and easy to spread Applicable on wet and dry surfaces, also vertically, and immediately waterproof and rainproof Adheres to most building materials and is compatible with all bituminous materials Can be finished with slate chippings for extra UV protection and walkability Instructions Apply to clean and stable substrate, free of ice or snow If necessary, clean and dry (without heating), remove loose parts and hardened bitumen, blisters in roof lining cut open in cross shape Reinforce large repairs with pieces of roofing or fibreglass tape Apply with sealant gun, brush or spatula Finish and clean tools with Tec7 Cleaner Do not use in ponds or watercourses, or on roofs that drain into ponds Layer thickness 2 mm, for grouting slate chippings, 1 mm thickness is sufficient 1 litre = 1 mm on 1m² ds: dsc: kts: roofing waterproof black 870 ml pot kpn: WP7-301 kpn_dash: WP7 kpn_clear: WP7301 bkpn: TEC7 WP7-301 bkpn_clear: TEC7 WP7301 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 602206000 sr_ns: TEC7602206000
r: 03320197 p: 5.64 pid: 178016 b: TEC7 q: 0 st: lt: 4 ean: 5414195022665 sr: TEC7 539505000 sr_no_br: 539505000 sr_no_br_cl: 539505000 sr_cl: TEC7539505000 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 100 ml EUH-statements EUH208 Relative density 1,08 ADR packing group ADR class UN number Physical state Solid Packaging Tube Color Colourless n: TEC7 TRANS CLEAR transparent universal sealant and adhesive 100 ml tube - 539505000 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description TRANSPARENT UNIVERSAL SEALANT Also adheres to wet substrates Mould- and bacteria-resistant Super strong and permanently elastic after rapid curing Free of solvents and isocyanates Safe on mirrors, no marking on natural stone Almost odourless Also on damp, smooth surfaces Mould- and bacteria-resistant Water- and airtight Can be used on most building materials Instructions Application temperature between +5°C and +40°C Apply on clean, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 polymers. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (best with telescopic piston) Due to the wide variety of different plastics and compositions, as well as materials prone to stress corrosion, preliminary tests are recommended Test adhesion to plastics, powdered paints, exotic woods and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer Due to the variety of lacquers and paints on the market, testing is recommended. The use of alkyd resin-based products may delay the drying process For mirror bonding in sanitary areas, only apply vertical glue strips to avoid stagnant moisture due to condensation Ideal adhesive thickness for optimal bonding strength: 3 mm ds: dsc: kts: transparent universal sealant and adhesive 100 ml tube kpn: TRANS CLEAR kpn_dash: kpn_clear: TRANSCLEAR bkpn: TEC7 TRANS CLEAR bkpn_clear: TEC7 TRANSCLEAR c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 539505000 sr_ns: TEC7539505000
r: 02313798 p: 54.48 pid: 3160 b: TEC7 q: 0 st: lt: 6 ean: 5414195602201 sr: TEC7 602210000 sr_no_br: 602210000 sr_no_br_cl: 602210000 sr_cl: TEC7602210000 sr_dash: sold: 12966.24 p_range: none type: standard act: 1 avo: av: EUH-statements EUH066 Relative density 1,1 ADR packing group ADR class UN number Weight 10 kg Principal hazard property GHS02 Flammable Conseils de prudence (P) P101; P102; P280; P260; P271; P304 + P340; P405; P501 H-statements H226; H373; H336; H412 Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS08 Health hazard Physical state Liquid Flash point 41 °C Packaging Bucket n: TEC7 Roof waterproof rubber paste for roof repair (10 kg) - 602210000 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: All-weather roof repair Fibre-reinforced, bituminous repair paste Remains soft and flexible (+20 years after application) Also on wet and/or frozen surfaces Features: The ultimate repair for all roofs - 20-year flexibility. Instant sealing and permanent repair at temperatures from -12°C to +50°C, on dry or wet surfaces, without dissolving or washing away. With butyl rubber for longer life and flexibility, bitumen for waterproofing and glass fibre for strength. Application: Repairing flat and pitched roofs with bituminous roofing. Sealing chimneys, gutters, eaves, compression strips, roof penetrations,... Waterproofing of foundations and walls, flat and sloping roofs, domes, terraces and balconies. As a cold adhesive for bonding bituminous materials (roofing, shingles, corrugated sheets). Fastening of lead seals. Immediate sealing of leaking roofs (wet substrates). Instructions for use: Apply with brush on clean surface, free of snow and ice. Use Roof pattern for easy finishing of seams. Finish with putty knife, moistened with Tec7-Cleaner. Use Tec7 Cleaner for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 products. ds: dsc: kts: waterproof rubber paste for roof repair (10 kg) kpn: Roof kpn_dash: kpn_clear: Roof bkpn: TEC7 Roof bkpn_clear: TEC7 Roof c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 sealant sr_no_br_cl_ns: 602210000 sr_ns: TEC7602210000
r: 02313785 p: 4.71 pid: 2996 b: TEC7 q: 0 st: lt: 6 ean: 5414195602164 sr: TEC7 602116000 sr_no_br: 602116000 sr_no_br_cl: 602116000 sr_cl: TEC7602116000 sr_dash: sold: 1949.94 p_range: none type: standard act: 1 avo: av: Net volume 310 ml EUH-statements EUH066 Relative density 1,1 ADR packing group ADR class UN number Principal hazard property GHS02 Flammable Conseils de prudence (P) P101; P102; P280; P260; P271; P304 + P340; P405; P501 H-statements H226; H373; H336; H412 Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS08 Health hazard Physical state Liquid Flash point 41 °C Packaging Cartridge n: TEC7 Roof waterproof rubber paste for roof repair (310 ml) - 602116000 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: All-weather roof repair Fibre-reinforced, bituminous repair paste Remains soft and flexible (+20 years after application) Also on wet and/or frozen surfaces Features: The ultimate repair for all roofs - 20-year flexibility. Instant sealing and permanent repair at temperatures from -12°C to +50°C, on dry or wet surfaces, without dissolving or washing away. With butyl rubber for longer life and flexibility, bitumen for waterproofing and glass fibre for strength. Application: Repairing flat and pitched roofs with bituminous roofing. Sealing chimneys, gutters, eaves, compression strips, roof penetrations,... Waterproofing of foundations and walls, flat and sloping roofs, domes, terraces and balconies. As a cold adhesive for bonding bituminous materials (roofing, shingles, corrugated sheets). Fastening of lead seals. Immediate sealing of leaking roofs (wet substrates). Instructions for use: Apply with brush on clean surface, free of snow and ice. Use Roof pattern for easy finishing of seams. Finish with putty knife, moistened with Tec7-Cleaner. Use Tec7 Cleaner for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 products. ds: dsc: kts: waterproof rubber paste for roof repair (310 ml) kpn: Roof kpn_dash: kpn_clear: Roof bkpn: TEC7 Roof bkpn_clear: TEC7 Roof c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 sealant sr_no_br_cl_ns: 602116000 sr_ns: TEC7602116000
r: 02313796 p: 29.14 pid: 3001 b: TEC7 q: 0 st: lt: 3 ean: 5414195602249 sr: TEC7 602204000 sr_no_br: 602204000 sr_no_br_cl: 602204000 sr_cl: TEC7602204000 sr_dash: sold: 466.24 p_range: none type: standard act: 1 avo: av: Weight 5 kg Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS08 Health hazard H-statements H226; H373; H336; H412 Conseils de prudence (P) P101; P102; P210; P280; P260; P271; P304 + P340; P405; P501 EUH-statements EUH066 n: TEC7 Roof waterproof rubber paste for roof repair (5 kg tin) - 602204000 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: All-weather roof repair Fibre-reinforced, bituminous repair paste Remains soft and flexible (+20 years after application) Also on wet and/or frozen surfaces Features: The ultimate repair for all roofs - 20-year flexibility. Instant sealing and permanent repair at temperatures from -12°C to +50°C, on dry or wet surfaces, without dissolving or washing away. With butyl rubber for longer life and flexibility, bitumen for waterproofing and glass fibre for strength. Application: Repairing flat and pitched roofs with bituminous roofing. Sealing chimneys, gutters, eaves, compression strips, roof penetrations,... Waterproofing of foundations and walls, flat and sloping roofs, domes, terraces and balconies. As a cold adhesive for bonding bituminous materials (roofing, shingles, corrugated sheets). Fastening of lead seals. Immediate sealing of leaking roofs (wet substrates). Instructions for use: Apply with brush on clean surface, free of snow and ice. Use Roof pattern for easy finishing of seams. Finish with putty knife, moistened with Tec7-Cleaner. Use Tec7 Cleaner for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 products. ds: dsc: kts: waterproof rubber paste for roof repair (5 kg tin) kpn: Roof kpn_dash: kpn_clear: Roof bkpn: TEC7 Roof bkpn_clear: TEC7 Roof c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 sealant sr_no_br_cl_ns: 602204000 sr_ns: TEC7602204000
