r: 08108047 p: 7.396 pid: 159616 b: WERA q: 0 st: lt: 8 ean: 4013288228734 sr: WERA 05006531001 sr_no_br: 05006531001 sr_no_br_cl: 05006531001 sr_cl: WERA05006531001 sr_dash: sold: 14.792 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Blade thickness Type of drive profile (bit) Pozidriv/Slotted Connection size (bit) 9 mm Connection profile (bit) Hexagonal VDE approved Yes Bit tip SL/PZ2 Drive profile size (bit) 2 Product Range Wera Kraftform Kompakt n: WERA 05006531001 Kraftform Kompakt VDE inserts for PlusMinus screws slotted/ Pozidriv 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE blade for the Kraftform Kompakt handle/interchangeable blade system. Combination profile slotted and Pozidriv, especially for use with clips, fuse boxes, switches, relays. Lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Reduced blade diameter with integrated protective insulation, low-lying screw and spring elements can be easily reached and operated. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. With Take it easy tool finder: colour coding by profile and laser-engraved size indication. The hexagon anti-roll protection avoids blades from rolling away unintentionally. Kraftform Kompakt VDE blade for PlusMinus screws slotted/Pozidriv Reduced shaft diameter and integrated insulation protection Insulated, individually tested as per IEC 60900 9 mm hex drive with with entry chamfer Black Point tip for enhanced corrosion protection and an exact fit Application PlusMinus screws slotted/Pozidriv Blade Reduced blade diameter with integrated protective insulation, low lying PlusMinus screws can be easily reached and operated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Burnished, Black Point tip, Take it easy Tool finder: Colour coding by profile and laser-engraved size indication; with hexagon anti-roll protection against rolling away Features and benefits Testing the tool for dielectric strength at 10,000 volt gives the user the peace of mind that their tool has been tested for its most important property, insulation. Wera VDE tools are subjected to this test piece by piece which guarantees safe working at up to 1,000 volt. The 157 mm length blades are suitable for Wera Kraftform bitholding screwdrivers 7400 VDE, 837 i RA, 827 T i and 817 VDE. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. ds: dsc: Scope of delivery Kraftform Kompakt VDE 65 iS PZ/S Take it easy, # 2 x 157 mm kts: Kraftform Kompakt VDE inserts for PlusMinus screws slotted/ Pozidriv 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006531001 kpn_dash: kpn_clear: 05006531001 bkpn: WERA 05006531001 bkpn_clear: WERA 05006531001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006531001 sr_ns: WERA05006531001
r: 08103682 p: 7.396 pid: 69982 b: WERA q: 0 st: lt: 8 ean: 4013288225788 sr: WERA 05008102001 sr_no_br: 05008102001 sr_no_br_cl: 05008102001 sr_cl: WERA05008102001 sr_dash: sold: 14.792 p_range: none type: standard act: 1 avo: 1 av: n: WERA 338 terminal block operating tool 0.6 x 3.5 x 81 mm - 05008102001 cn: ASSEMBLY AND DISASSEMBLY TOOL cn2: ASSEMBLY AND DISASSEMBLY TOOL cn_clear: ASSEMBLYANDDISASSEMBLYTOOL d: Product description Useful actuation tool for spring terminals. The curved blade also makes it easy to operate spring terminals in distribution boxes which cannot be reached with a straight blade. The blade stays in the terminal block, leaving both hands free to insert the wire. Multi-component Kraftform handle for fast and smooth work. Suitable for spring terminals with a conductor cross-section of 2.5 to 4.0 mm 2 Application Unlocking contact springs in electrotechnical line terminals; for spring terminals with a conductor cross-section of up to 1.5 mm 2 and 2.5 to 4.0 mm 2 Blade Round, plastic coated, curved by 30° Handle Kraftform with anti-roll protection, multi-component Features and benefits Due to the curved geometry, even terminal blocks that cannot be reached with normal screwdrivers can be operated Terminal blocks hold the wire ends mechanically. The force required for this is applied by a spring in the case of tension spring terminals. The spring must be opened by a tool in order to be able to insert the wire ends. The special actuation tools from Wera allow operating the tension spring terminals - even in tight spaces such as switch cabinets. The curved blade also allows spring terminals to be reached where straight-blade tools cannot be used. The blade tip stays in the terminal block, leaving both hands free to insert the end of the wire. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 338 Actuation tool for terminal blocks (spring cages), 0.6 x 3.5 x 81 mm kts: terminal block operating tool 0.6 x 3.5 x 81 mm kpn: 338 kpn_dash: kpn_clear: 338 bkpn: WERA 338 bkpn_clear: WERA 338 c_path: Home / Tools / Hand tools / Miscellaneous / Other miscellaneous / Assembly and disassembly tool | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera miscellaneous / Wera other miscellaneous / Wera assembly and disassembly tool sr_no_br_cl_ns: 05008102001 sr_ns: WERA05008102001
r: 02832885 p: 7.396 pid: 41413 b: WERA q: 0 st: lt: 8 ean: 4013288018731 sr: WERA 05021645001 sr_no_br: 05021645001 sr_no_br_cl: 05021645001 sr_cl: WERA05021645001 sr_dash: sold: 14.792 p_range: none type: standard act: 1 avo: 1 av: Width across flats 12 mm Non-sparking No Overall length 250 mm Blade length 250 mm Surface treatment Chrome plated Short arm length 45 mm With safety colour code 1000V No VDE approved No Handle type With handle No With ball head No n: WERA 950 L socket spanner metric chrome plated 12 x 250 mm - 05021645001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description High quality L-keys for hexagonal socket screws. Hex-Plus offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The precise chrome-plated design ensures high corrosion protection; with extra-long arm. L-keys for hexagonal socket screws Hexagonal socket wrench with Hex-Plus advantage for a longer screw life High corrosion protection thanks to chrome-plating Extra-long arm Metric Application Hexagon socket screws Design Chrome-plated Tip Hex-Plus Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. Chrome-plated hexagon L-keys for outstanding surface protection and long service life. High corrosion protection. ds: dsc: Scope of delivery 950 L L-key, metric, chrome-plated, 12 x 250 mm kts: socket spanner metric chrome plated 12 x 250 mm kpn: 950 L kpn_dash: kpn_clear: 950L bkpn: WERA 950 L bkpn_clear: WERA 950L c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05021645001 sr_ns: WERA05021645001
r: 02669001 p: 7.396 pid: 45900 b: WERA q: 0 st: lt: 6 ean: 4013288110596 sr: WERA 05118135001 sr_no_br: 05118135001 sr_no_br_cl: 05118135001 sr_cl: WERA05118135001 sr_dash: sold: 14.792 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Width across flats 3/16" With safety colour code 1000V ESD No Handle type Screwdriver handle Blade length 60 mm VDE approved No Product Range Wera Kraftform n: WERA 2069 kraftform micro cap screwdriver 3/16" x 60 mm - 05118135001 cn: NUT DRIVER cn2: NUT DRIVER cn_clear: NUTDRIVER d: Product description Premium Wera Micro insert wrench for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro nutsetter for hex head screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Anti-roll feature and rotating cap for rapid twisting E.g. for electricians, opticians, precision mechanics, jewellers or IT hardware fitters Application Hexagon headed bolts, screws and nuts Blade Round Design Chrome-plated Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (gray = external hexagon) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Indispensable for many users, including electronics technicians, opticians, precision engineers, jewellers, EDP hardware fitters and model-makers ds: dsc: Scope of delivery 2069 Nutdriver for electronic applications, 3/16" x 60 mm kts: kraftform micro cap screwdriver 3/16" x 60 mm kpn: 2069 kpn_dash: kpn_clear: 2069 bkpn: WERA 2069 bkpn_clear: WERA 2069 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Nut driver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera nut driver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118135001 sr_ns: WERA05118135001
r: 02818418 p: 2.95 pid: 45413 b: WERA q: 0 st: lt: 12 ean: 4013288029065 sr: WERA 05073305001 sr_no_br: 05073305001 sr_no_br_cl: 05073305001 sr_cl: WERA05073305001 sr_dash: sold: 14.75 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH2 Number per blister 2 n: WERA 851/1 Z SB SiS bit Phillips, PH 2 x 25 mm (2 pcs) - 05073305001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough viscous Wera bits for hexagon socket screws and universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For Phillips screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) In practical 2-piece set Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 851/1 Z SB bits, PH 2 x 25 mm, 2 pieces 2x 851/1 Z bits: PH 2 x 25 mm kts: bit Phillips, PH 2 x 25 mm (2 pcs) kpn: 851/1 Z SB SiS kpn_dash: kpn_clear: 8511ZSBSiS bkpn: WERA 851/1 Z SB SiS bkpn_clear: WERA 8511ZSBSiS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073305001 sr_ns: WERA05073305001
r: 02822815 p: 2.95 pid: 45188 b: WERA q: 0 st: lt: 12 ean: 4013288029096 sr: WERA 05073308001 sr_no_br: 05073308001 sr_no_br_cl: 05073308001 sr_cl: WERA05073308001 sr_dash: sold: 14.75 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ1 Number per blister 2 n: WERA 855/1 Z SB SiS bit Pozidriv, PZ 1 x 25 mm (2 pcs) - 05073308001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for Pozidriv screws. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. Suitable for Pozidriv screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) In practical 2-piece set Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 855/1 Z SB bits, PZ 1 x 25 mm, 2 pieces 2x 855/1 Z bits: PZ 1 x 25 mm kts: bit Pozidriv, PZ 1 x 25 mm (2 pcs) kpn: 855/1 Z SB SiS kpn_dash: kpn_clear: 8551ZSBSiS bkpn: WERA 855/1 Z SB SiS bkpn_clear: WERA 8551ZSBSiS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073308001 sr_ns: WERA05073308001
r: 02835567 p: 7.31 pid: 42055 b: WERA q: 0 st: lt: 13 ean: 4013288032164 sr: WERA 05118078001 sr_no_br: 05118078001 sr_no_br_cl: 05118078001 sr_cl: WERA05118078001 sr_dash: sold: 14.62 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size HEX 5/64" Blade length 60 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Hexagon Product Range Wera Kraftform n: WERA 2054 Micro Kraftform hexagonal screwdriver, 5/64" x 60 mm - 05118078001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro screwdriver for hexagon socket screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving The Wera Black Point tip offers an exact fit and optimum corrosion protection Hex-Plus allows socket head screws to live longer Take it easy tool finder: colour coding according to profile and size Application Hexagon socket screws Blade Round Design Hex-Plus, chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (blue = hexagon) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2054 Screwdriver for hexagon socket screws for electronic applications, 5/64" x 60 mm kts: Kraftform hexagonal screwdriver, 5/64" x 60 mm kpn: 2054 Micro kpn_dash: kpn_clear: 2054Micro bkpn: WERA 2054 Micro bkpn_clear: WERA 2054Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118078001 sr_ns: WERA05118078001
r: 02830878 p: 7.272 pid: 42444 b: WERA q: 0 st: lt: 16 ean: 4013288181374 sr: WERA 05100062001 sr_no_br: 05100062001 sr_no_br_cl: 05100062001 sr_cl: WERA05100062001 sr_dash: sold: 14.544 p_range: none type: standard act: 1 avo: 1 av: Drive size T20 Drive type Torx Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V n: WERA 367 SB Torx screwdriver, TX 20 x 100 mm - 05100062001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and gentle work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Screwdriver for recessed TORX® screws Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away The Wera Black Point tip offers an exact fit and optimum corrosion protection Application TORX® socket screws Blade Round Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (green = TORX®) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 367 SB Screwdriver for TORX® screws, TX 20 x 100 mm kts: Torx screwdriver, TX 20 x 100 mm kpn: 367 SB kpn_dash: kpn_clear: 367SB bkpn: WERA 367 SB bkpn_clear: WERA 367SB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05100062001 sr_ns: WERA05100062001
r: 02836095 p: 7.272 pid: 42165 b: WERA q: 0 st: lt: 12 ean: 4013288183385 sr: WERA 05003837001 sr_no_br: 05003837001 sr_no_br_cl: 05003837001 sr_cl: WERA05003837001 sr_dash: sold: 14.544 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Length 60 mm Type of drive profile (bit) Torx Blade thickness Connection size 1/2" VDE approved No With safety colour code 1000V Bit tip T55 Drive profile size (bit) 55 Product Range Wera Zyklop n: WERA 8767 C HF Zyklop bit cap with 1/2" drive, with holding function Torx (TX 55 x 60 mm) - 05003837001 cn: BIT SOCKET cn2: BIT SOCKET cn_clear: BITSOCKET d: Product description Bit socket with 1/2" drive and holding function for particularly comfortable screwdriving with reduced risk of losing the screw when feeding it into the workpiece. With Take it easy tool finder with colour coding by size - for quick and easy identification of the required tool . Bit socket (non-impact) for manual or machine tool operations The holding function holds screws securely on the tool With Take it easy tool finder: colour coding by size Knurling on lower end for more grip when used manually. Chrome vanadium steel, matte chrome-plated Application TORX® socket screws Design Manual and (non-impact) machine applications, ball intercept ring, knurls at base for precision handling in manual operations, chrome vanadium, brushed chrome-plated finish, holding function for TORX® screws made according to Acument Intellectual Properties specifications. Take it easy tool finder: Colour coding to enable the desired bit socket to be easily located Features and benefits The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that TORX® screws made according to Acument Intellectual Properties specifications are securely held on the tool! Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The manual and machine sockets can be used both for hand and power tools use (non-impact). Users need just one socket set for all applications. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that TORX® screws made according to Acument Intellectual Properties specifications are securely held on the tool! ds: dsc: Scope of delivery 8767 C HF TORX® Zyklop bit socket with 1/2" drive with holding function, TX 55 x 60 mm kts: Zyklop bit cap with 1/2" drive, with holding function Torx (TX 55 x 60 mm) kpn: 8767 C HF kpn_dash: kpn_clear: 8767CHF bkpn: WERA 8767 C HF bkpn_clear: WERA 8767CHF c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Bit socket | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera bit socket | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05003837001 sr_ns: WERA05003837001
r: 02818188 p: 7.272 pid: 44477 b: WERA q: 0 st: lt: 12 ean: 4013288155528 sr: WERA 05059665001 sr_no_br: 05059665001 sr_no_br_cl: 05059665001 sr_cl: WERA05059665001 sr_dash: sold: 14.544 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 89 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 5/32" Drive profile size (bit) 5/32" Product Range Wera Hex-Plus n: WERA 840/4 Z Hex-Plus hexagon bit, 5/32" x 89 mm - 05059665001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z bits, 5/32" x 89 mm kts: hexagon bit, 5/32" x 89 mm kpn: 840/4 Z Hex-Plus kpn_dash: 840/4 Z Hex kpn_clear: 8404ZHexPlus bkpn: WERA 840/4 Z Hex-Plus bkpn_clear: WERA 8404ZHexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05059665001 sr_ns: WERA05059665001
r: 02828758 p: 7.272 pid: 42684 b: WERA q: 0 st: lt: 13 ean: 4013288037305 sr: WERA 05134688001 sr_no_br: 05134688001 sr_no_br_cl: 05134688001 sr_cl: WERA05134688001 sr_dash: sold: 14.544 p_range: none type: standard act: 1 avo: 1 av: Length 70 mm Drive profile size (bit) 20 Blade thickness Type of drive profile (bit) Torx Plus Connection size (bit) 1/4" VDE approved No Bit tip IP20 n: WERA 867/4 IP TORX PLUS bit, 20 IP x 70 mm - 05134688001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX PLUS® screws. TORX PLUS® profile: in comparison to normal TORX® profiles, the enlargement of the 6 torque-transferring flanks between the tool and the screw is effected by means of an ellipse-shaped profile design and not a circular one. This means that the power applied when screwdriving is spread over a larger area. Higher torque is transferred and the service life of the screw and tool is also enhanced. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For TORX PLUS® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX PLUS® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Compared with the "normal" TORX® profile, the elliptical instead of circular profile enlarges the 6 flanks that transfer torque between the tool and the screw. This means that the force applied when screwdriving is spread across a larger surface area. Higher torque is transferred and, in addition, the service life of the screw and tool are lengthened. The so-called centre-lock screws on cutting tools represent a typical use of this type of screw profile. The thermal influences on such holders for carbide insert tips often "bake" the retaining screws so firmly that it is important to have a profile that considerably enhances the loosening torque capability of the screws. For this reason a torque-stable screw profile is necessary to avoid any possible damage to the screw and to exclude the possibility of an otherwise costly machine downtime. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 IP TORX PLUS® bits, 20 IP x 70 mm kts: bit, 20 IP x 70 mm kpn: 867/4 IP TORX PLUS kpn_dash: kpn_clear: 8674IPTORXPLUS bkpn: WERA 867/4 IP TORX PLUS bkpn_clear: WERA 8674IPTORXPLUS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05134688001 sr_ns: WERA05134688001
r: 02835191 p: 7.272 pid: 43659 b: WERA q: 0 st: lt: 12 ean: 4013288183996 sr: WERA 05030402001 sr_no_br: 05030402001 sr_no_br_cl: 05030402001 sr_cl: WERA05030402001 sr_dash: sold: 14.544 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size T6 Blade length 40 mm Blade thickness ESD Yes Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx Product Range Wera Kraftform n: WERA 1567 TORX HF ESD Micro Kraftform screwdriver with holding function, TX 6 x 40 mm - 05030402001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description ESD-safe Micro screwdriver. Dependable protection against electrostatic energy and associated damage. Holding function: the wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screw on the tool. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Power zones with integrated soft sections ensure the transfer of high loosening and tightening torque; a precision zone for the right rotation angle during fine adjustment work. The Black Point tip offers optimised corrosion protection and an exact fit. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. Kraftform Micro screwdriver for TORX® screws ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Holding function for TORX® screws Take it easy tool finder: colour coding according to profile and size Application TORX® socket screws Blade Round Design Holding function for TORX® screws made according to Acument Global Technologies Inc. specifications, chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (green = TORX®) and size stamp. Features and benefits The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! Multi-component screwdriver handle for ergonomic working. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allow rapid twisting. This makes time-consuming grip adjustments as with other conventional precision screwdrivers unnecessary. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 1567 TORX® HF ESD Kraftform Micro screwdriver with holding function for TORX® screws, TX 6 x 40 mm kts: Kraftform screwdriver with holding function, TX 6 x 40 mm kpn: 1567 TORX HF ESD Micro kpn_dash: kpn_clear: 1567TORXHFESDMicro bkpn: WERA 1567 TORX HF ESD Micro bkpn_clear: WERA 1567TORXHFESDMicro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05030402001 sr_ns: WERA05030402001
r: 02818210 p: 7.272 pid: 44486 b: WERA q: 0 st: lt: 12 ean: 4013288155542 sr: WERA 05059667001 sr_no_br: 05059667001 sr_no_br_cl: 05059667001 sr_cl: WERA05059667001 sr_dash: sold: 14.544 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 89 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 7/32" Drive profile size (bit) 7/32" Product Range Wera Hex-Plus n: WERA 840/4 Z Hex-Plus hexagon bit, 7/32" x 89 mm - 05059667001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z bits, 7/32" x 89 mm kts: hexagon bit, 7/32" x 89 mm kpn: 840/4 Z Hex-Plus kpn_dash: 840/4 Z Hex kpn_clear: 8404ZHexPlus bkpn: WERA 840/4 Z Hex-Plus bkpn_clear: WERA 8404ZHexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05059667001 sr_ns: WERA05059667001
r: 08131699 p: 7.272 pid: 173483 b: WERA q: 0 st: lt: 7 ean: 4013288233387 sr: WERA 05138006001 sr_no_br: 05138006001 sr_no_br_cl: 05138006001 sr_cl: WERA05138006001 sr_dash: sold: 14.544 p_range: none type: standard act: 1 avo: 1 av: Drive profile size 1/2" Type of drive profile External square Connection size 1/4" Connection profile External hexagon Length 72 mm n: WERA 870/4 A adapter 1/4" x 1/2" x 72 mm - 05138006001 cn: SOCKET ADAPTOR cn2: SOCKET ADAPTOR cn_clear: SOCKETADAPTOR d: Product description Tool shaft for manual nutsetter inserts; with ball. Output: 1/4" square head; 1/2" square head; drive 1/4" hexagon. Tool shaft for manual nutsetter inserts 1/4" external square 1/2" external square 1/4" hexagon drive (Wera connecting series 4) With ball Application Manual nut spinner sockets Drive 1/4" hexagon Output 1/4" external square; ; 1/2" external square Features and benefits With friction ball; for manual nut spinner sockets ds: dsc: Scope of delivery 870/4 Adaptor for manual nut spinner sockets, 1/4" x 1/2" x 72 mm kts: adapter 1/4" x 1/2" x 72 mm kpn: 870/4 A kpn_dash: kpn_clear: 8704A bkpn: WERA 870/4 A bkpn_clear: WERA 8704A c_path: Home / Tools / Hand tools / Sockets and ratchets / Accessories and spare parts / Socket adaptor | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera accessories and spare parts / Wera socket adaptor sr_no_br_cl_ns: 05138006001 sr_ns: WERA05138006001
r: 02059747 p: 7.272 pid: 42600 b: WERA q: 0 st: lt: 15 ean: 4013288025876 sr: WERA 05138261001 sr_no_br: 05138261001 sr_no_br_cl: 05138261001 sr_cl: WERA05138261001 sr_dash: sold: 14.544 p_range: none type: standard act: 1 avo: 1 av: Drive size TT15 Blade length 80 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx Tamper Resistant n: WERA 367 TORX BO screwdriver with bore, TX 15 x 80 mm - 05138261001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and low-fatigue working. TORX® BO screws have a protruding pin in their drive profile. This prevents any unauthorised loosening since the "normal" hex tools cannot move these screws. Only special TORX® BO tools have a bore hole which can slip over the pin. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Handle markings for simplified finding and sorting of the tool. Screwdrivers for recessed TORX® screws with safety pin Multi-component Kraftform handle for fast and ergonomic screwdriving For TORX® socket screws with safety pin Handle markings simplify finding and sorting of tools The Wera Black Point tip offers an exact fit and optimum corrosion protection Application TORX® screws with safety pin (BO = with bore hole) Blade Round Design Bore hole in TORX® section, chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. TORX® tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profile so that "normal" TORX® tools cannot be used. This pin fits into the borehole of TORX® BO tools allowing safety screws to be unfastened. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 367 TORX® BO Screwdriver for tamper-proof TORX® screws, TX 15 x 80 mm kts: screwdriver with bore, TX 15 x 80 mm kpn: 367 TORX BO kpn_dash: kpn_clear: 367TORXBO bkpn: WERA 367 TORX BO bkpn_clear: WERA 367TORXBO c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05138261001 sr_ns: WERA05138261001
r: 02059745 p: 7.272 pid: 42442 b: WERA q: 0 st: lt: 11 ean: 4013288039989 sr: WERA 05138259001 sr_no_br: 05138259001 sr_no_br_cl: 05138259001 sr_cl: WERA05138259001 sr_dash: sold: 14.544 p_range: none type: standard act: 1 avo: 1 av: Drive size TT9 Blade length 60 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx Tamper Resistant n: WERA 367 TORX BO screwdriver with bore, TX 9 x 60 mm - 05138259001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and low-fatigue working. TORX® BO screws have a protruding pin in their drive profile. This prevents any unauthorised loosening since the "normal" hex tools cannot move these screws. Only special TORX® BO tools have a bore hole which can slip over the pin. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Handle markings for simplified finding and sorting of the tool. Screwdrivers for recessed TORX® screws with safety pin Multi-component Kraftform handle for fast and ergonomic screwdriving For TORX® socket screws with safety pin Handle markings simplify finding and sorting of tools The Wera Black Point tip offers an exact fit and optimum corrosion protection Application TORX® screws with safety pin (BO = with bore hole) Blade Round Design Bore hole in TORX® section, chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. TORX® tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profile so that "normal" TORX® tools cannot be used. This pin fits into the borehole of TORX® BO tools allowing safety screws to be unfastened. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 367 TORX® BO Screwdriver for tamper-proof TORX® screws, TX 9 x 60 mm kts: screwdriver with bore, TX 9 x 60 mm kpn: 367 TORX BO kpn_dash: kpn_clear: 367TORXBO bkpn: WERA 367 TORX BO bkpn_clear: WERA 367TORXBO c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05138259001 sr_ns: WERA05138259001
r: 02818177 p: 7.272 pid: 44293 b: WERA q: 0 st: lt: 9 ean: 4013288155504 sr: WERA 05059663001 sr_no_br: 05059663001 sr_no_br_cl: 05059663001 sr_cl: WERA05059663001 sr_dash: sold: 14.544 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 89 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 1/8" Drive profile size (bit) 1/8" Product Range Wera Hex-Plus n: WERA 840/4 Z Hex-Plus hexagon bit, 1/8" x 89 mm - 05059663001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z bits, 1/8" x 89 mm kts: hexagon bit, 1/8" x 89 mm kpn: 840/4 Z Hex-Plus kpn_dash: 840/4 Z Hex kpn_clear: 8404ZHexPlus bkpn: WERA 840/4 Z Hex-Plus bkpn_clear: WERA 8404ZHexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05059663001 sr_ns: WERA05059663001
r: 02686819 p: 7.22 pid: 44161 b: WERA q: 0 st: lt: 8 ean: 4013288117175 sr: WERA 05022712001 sr_no_br: 05022712001 sr_no_br_cl: 05022712001 sr_cl: WERA05022712001 sr_dash: sold: 14.44 p_range: none type: standard act: 1 avo: 1 av: Width across flats 1/8" Non-sparking No Overall length 123 mm Blade length 123 mm Surface treatment None Short arm length 21 mm With safety colour code 1000V No VDE approved No Handle type With handle No With ball head Yes n: WERA 3950 PKL stainless steel spanner 1/8" x 123 mm - 05022712001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description High quality L-keys out of stainless steel for imperial hexagonal socket screws by Wera. Stainless steel prevents the formation of extraneous rust. The Hex-Plus profile offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. Hexagonal ballpoint end on the long arm: the ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. Solution to the extraneous rust problem: fasten stainless screws with stainless tools For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Hexagonal ballpoint on the long arm Imperial Application Hexagon socket screws Design Stainless steel Tip Hex-Plus, ball-end hexagon on long arm Features and benefits Stainless L-keys are hardened to the same strength as conventional (carbon) steel tools, and prevent extraenous rust forming. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. ds: dsc: Scope of delivery 3950 PKL L-key, Imperial, stainless, 1/8" x 123 mm kts: stainless steel spanner 1/8" x 123 mm kpn: 3950 PKL kpn_dash: kpn_clear: 3950PKL bkpn: WERA 3950 PKL bkpn_clear: WERA 3950PKL c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05022712001 sr_ns: WERA05022712001
r: 02833756 p: 7.22 pid: 41834 b: WERA q: 0 st: lt: 12 ean: 4013288182500 sr: WERA 05022630001 sr_no_br: 05022630001 sr_no_br_cl: 05022630001 sr_cl: WERA05022630001 sr_dash: sold: 14.44 p_range: none type: standard act: 1 avo: 1 av: Width across flats 5/64" With ball head Yes With handle No Handle type VDE approved No With safety colour code 1000V No Non-sparking No Blade length 101 mm Short arm length 16 mm Overall length 101 mm n: WERA 950 SPKL socket spanner multicolour 5/64" x 101 mm - 05022630001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description Wera L-keys with finger-protecting plastic sleeves for imperial socket head screws. This means they are ergonomic and pleasant to grip even in cold temperatures. The Hex Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. The ballpoint on the long arm allows dependable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. Laser-engraved and thereby wear-resistant size markings on the L-keys for rapid accessing. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer Rubber sleeve for pleasant grip Hexagonal ballpoint on the long arm BlackLaser for high corrosion protection and long service life Application Hexagon socket screws Design BlackLaser surface, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. L-keys made from circular material fit into the hand better and allow less strenuous work over a longer period. Additionally, the rubber sleeve provides a pleasant grip, particularly in applications at low temperatures. Colour coding and large stamp enable the desired L-key to be easily located. Moreover, the round material keys are more robust, particularly where smaller sizes are concerned. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 950 SPKL L-key Multicolour, Imperial, 5/64" x 101 mm kts: socket spanner multicolour 5/64" x 101 mm kpn: 950 SPKL kpn_dash: kpn_clear: 950SPKL bkpn: WERA 950 SPKL bkpn_clear: WERA 950SPKL c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05022630001 sr_ns: WERA05022630001
r: 02240432 p: 7.2 pid: 43596 b: WERA q: 0 st: lt: 9 ean: 4013288036377 sr: WERA 05135095001 sr_no_br: 05135095001 sr_no_br_cl: 05135095001 sr_cl: WERA05135095001 sr_dash: sold: 14.4 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 50 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 9/64" Drive profile size (bit) 9/64" Product Range Wera Hex-Plus n: WERA 840/4 Z Hex-Plus hexagon bit, 9/64" x 50 mm - 05135095001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z bits, 9/64" x 50 mm kts: hexagon bit, 9/64" x 50 mm kpn: 840/4 Z Hex-Plus kpn_dash: 840/4 Z Hex kpn_clear: 8404ZHexPlus bkpn: WERA 840/4 Z Hex-Plus bkpn_clear: WERA 8404ZHexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05135095001 sr_ns: WERA05135095001
