r: 03226731 p: 13.181 pid: 70732 b: WERA q: 0 st: lt: 12 ean: 4013288192950 sr: WERA 05004952001 sr_no_br: 05004952001 sr_no_br_cl: 05004952001 sr_cl: WERA05004952001 sr_dash: sold: 13.181 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Socket size 8 mm Connection size 3/8" Connection profile Inner square Length 46 mm VDE approved Yes With safety colour code 1000V No Non-sparking No Magnetic No Type of drive profile (socket) Hexagonal Product Range Wera Zyklop n: WERA 8790 B VDE Zyklop cap insulated with 3/8" drive 6 x 46 mm - 05004952001 cn: HAND SOCKET cn2: HAND SOCKET cn_clear: HANDSOCKET d: Product description 3/8" VDE sockets with increased safety through yellow insulation core, which becomes visible in case of damage to the outer red VDE insulation layer. Individually tested tool as per IEC 60900 at 10,000V for safe working at the approved voltage of 1,000V. Individually tested tools as per IEC 60900 at 10,000 V Increased safety thanks to 2-component insulation with a yellow insulation core under an outer red insulation layer Plastic sleeve protects surfaces from damage Application Hexagon headed bolts, screws and nuts Design Insulated, individually tested as per IEC 60900. Increased safety due to 2-component insulation with yellow insulation core, which becomes visible in case of damage to the outer red VDE insulation layer. Features and benefits Zyklop ratchet and accessories for electricians Safe working at voltages up to 1,000 V is guaranteed as Zyklop tools for electricians are individually tested at 10,000 V as per IEC 60900. The Zyklop sockets and extensions for electricians offer increased safety thanks to their 2-component insulation with a yellow insulation core under an outer red insulation layer. ds: dsc: Scope of delivery 8790 B VDE Zyklop 3/8" socket, insulated, 8 x 46 mm kts: Zyklop cap insulated with 3/8" drive 6 x 46 mm kpn: 8790 B VDE kpn_dash: kpn_clear: 8790BVDE bkpn: WERA 8790 B VDE bkpn_clear: WERA 8790BVDE c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Hand socket | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera hand socket | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05004952001 sr_ns: WERA05004952001
r: 03227760 p: 6.57 pid: 69640 b: WERA q: 0 st: lt: 12 ean: 4013288189097 sr: WERA 05003059001 sr_no_br: 05003059001 sr_no_br_cl: 05003059001 sr_cl: WERA05003059001 sr_dash: sold: 13.14 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Length 35 mm Type of drive profile (bit) Torx Blade thickness Connection size 3/8" VDE approved No With safety colour code 1000V Bit tip T10 Drive profile size (bit) 10 Product Range Wera Zyklop n: WERA 8767 B HF Zyklop bit cap with 3/8" drive, with holding function Torx (TX 10 x 35 mm) - 05003059001 cn: BIT SOCKET cn2: BIT SOCKET cn_clear: BITSOCKET d: Product description Bit socket with 3/8" drive and holding function for particularly comfortable screwdriving with reduced risk of losing the screw when feeding it into the workpiece. With Take it easy tool finder with colour coding by size - for quick and easy identification of the required tool . Bit socket (non-impact) for manual or machine tool operations The holding function holds screws securely on the tool With Take it easy tool finder: colour coding by size Knurling on lower end for more grip when used manually. Chrome vanadium steel, matte chrome-plated Application TORX® socket screws Design Manual and (non-impact) machine applications, ball intercept ring, knurls at base for precision handling in manual operations, bit sockets with all the advantages of the Wera bit technology, brushed chrome-plated finish, holding function for TORX® screws made according to Acument Intellectual Properties specifications. Take it easy tool finder: Colour coding to enable the desired bit socket to be easily located Features and benefits Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The manual and machine sockets can be used both for hand and power tools use (non-impact). Users need just one socket set for all applications. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that TORX® screws made according to Acument Intellectual Properties specifications are securely held on the tool! ds: dsc: Scope of delivery 8767 B HF TORX® Zyklop bit socket with holding function, 3/8" drive, TX 10 x 35 mm kts: Zyklop bit cap with 3/8" drive, with holding function Torx (TX 10 x 35 mm) kpn: 8767 B HF kpn_dash: kpn_clear: 8767BHF bkpn: WERA 8767 B HF bkpn_clear: WERA 8767BHF c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Bit socket | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera bit socket | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05003059001 sr_ns: WERA05003059001
r: 03227770 p: 6.57 pid: 69645 b: WERA q: 0 st: lt: 12 ean: 4013288188878 sr: WERA 05003064001 sr_no_br: 05003064001 sr_no_br_cl: 05003064001 sr_cl: WERA05003064001 sr_dash: sold: 13.14 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Length 35 mm Type of drive profile (bit) Torx Blade thickness Connection size 3/8" VDE approved No With safety colour code 1000V Bit tip T27 Drive profile size (bit) 27 Product Range Wera Zyklop n: WERA 8767 B HF Zyklop bit cap with 3/8" drive, with holding function Torx (TX 27 x 35 mm) - 05003064001 cn: BIT SOCKET cn2: BIT SOCKET cn_clear: BITSOCKET d: Product description Bit socket with 3/8" drive and holding function for particularly comfortable screwdriving with reduced risk of losing the screw when feeding it into the workpiece. With Take it easy tool finder with colour coding by size - for quick and easy identification of the required tool . Bit socket (non-impact) for manual or machine tool operations The holding function holds screws securely on the tool With Take it easy tool finder: colour coding by size Knurling on lower end for more grip when used manually. Chrome vanadium steel, matte chrome-plated Application TORX® socket screws Design Manual and (non-impact) machine applications, ball intercept ring, knurls at base for precision handling in manual operations, bit sockets with all the advantages of the Wera bit technology, brushed chrome-plated finish, holding function for TORX® screws made according to Acument Intellectual Properties specifications. Take it easy tool finder: Colour coding to enable the desired bit socket to be easily located Features and benefits Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The manual and machine sockets can be used both for hand and power tools use (non-impact). Users need just one socket set for all applications. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that TORX® screws made according to Acument Intellectual Properties specifications are securely held on the tool! ds: dsc: Scope of delivery 8767 B HF TORX® Zyklop bit socket with holding function, 3/8" drive, TX 27 x 35 mm kts: Zyklop bit cap with 3/8" drive, with holding function Torx (TX 27 x 35 mm) kpn: 8767 B HF kpn_dash: kpn_clear: 8767BHF bkpn: WERA 8767 B HF bkpn_clear: WERA 8767BHF c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Bit socket | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera bit socket | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05003064001 sr_ns: WERA05003064001
r: 02835197 p: 6.57 pid: 42023 b: WERA q: 0 st: lt: 12 ean: 4013288184030 sr: WERA 05030406001 sr_no_br: 05030406001 sr_no_br_cl: 05030406001 sr_cl: WERA05030406001 sr_dash: sold: 13.14 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size T10 Blade length 60 mm Blade thickness ESD Yes Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx Product Range Wera Kraftform n: WERA 1567 TORX HF ESD Micro Kraftform screwdriver with holding function, TX 10 x 60 mm - 05030406001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description ESD-safe Micro screwdriver. Dependable protection against electrostatic energy and associated damage. Holding function: the wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screw on the tool. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Power zones with integrated soft sections ensure the transfer of high loosening and tightening torque; a precision zone for the right rotation angle during fine adjustment work. The Black Point tip offers optimised corrosion protection and an exact fit. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. Kraftform Micro screwdriver for TORX® screws ESD-safe tool thanks to surface resistance of ds: dsc: Scope of delivery 1567 TORX® HF ESD Kraftform Micro screwdriver with holding function for TORX® screws, TX 10 x 60 mm kts: Kraftform screwdriver with holding function, TX 10 x 60 mm kpn: 1567 TORX HF ESD Micro kpn_dash: kpn_clear: 1567TORXHFESDMicro bkpn: WERA 1567 TORX HF ESD Micro bkpn_clear: WERA 1567TORXHFESDMicro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05030406001 sr_ns: WERA05030406001
r: 03057684 p: 6.57 pid: 31781 b: WERA q: 0 st: lt: 11 ean: 4013288207890 sr: WERA 05023340001 sr_no_br: 05023340001 sr_no_br_cl: 05023340001 sr_cl: WERA05023340001 sr_dash: sold: 13.14 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Width across flats 4 mm With ball head No With handle Yes Handle type T-handle VDE approved No With safety colour code 1000V No Non-sparking No Surface treatment Chrome plated Blade length 200 mm Short arm length 15 mm Overall length 200 mm Product Range Wera Hex-Plus n: WERA 454 HF T-handle hex screwdriver Hex-Plus with holding function, 4 x 200 mm - 05023340001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description T-handle screwdriver: The ideal handle shape allows the transmission of particularly high tightening and loosening moments. The ergonomic shape of the handle fills the ball of the hand well, the fingers lie securely in the softly rounded recessed grips. The whole hand comes into contact with the handle and friction losses between hand and handle are avoided. With holding function to hold the hexagonal socket screw securely on the tool. Special surface treatment for high corrosion protection and optimal fitting accuracy in the screw. T-handle screwdriver for the transmission of particularly high tightening and loosening torque Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working With additional short arm for the transmission of extremely high torques due to the leverage of the long arm With holding function (HF) on the long arm to securely hold the screw on the tool Take it easy tool finder: colour coding according to profile and size Application Hexagon socket screws Blade Hexagon Design With long and short arm, Hex-Plus, bevelled, matte chrome-plated, with holding function for hexagon socket screws on the long arm Handle T-shape, 2 components, with hole for hanging. With Take it easy tool finder: Colour coding by profiles (blue = hexagon socket) and size stamping. Features and benefits The ergonomically shaped 2-component T-handle with finger recesses and pleasant surface facilitates very high power transmission and fatigue-free working. A spring loaded ball ensures the hexagon socket screw to be clamped on the tool tip. Especially helpful in hard to reach areas where you can not use your other hand to hold the screw. The additional short arm, which emerges laterally from the handle, allows the transmission of extremely high torques by using the long arm as a lever. By using the blade as an extension of your lower arm you can transfer particularly high torque. Due to the special surface treatment, the blades receive a high level of corrosion protection. The optimum fitting accuracy of the screw is also guaranteed. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 454 HF T-handle hexagon screwdriver Hex-Plus with holding function, 4 x 200 mm kts: T-handle hex screwdriver Hex-Plus with holding function, 4 x 200 mm kpn: 454 HF kpn_dash: kpn_clear: 454HF bkpn: WERA 454 HF bkpn_clear: WERA 454HF c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05023340001 sr_ns: WERA05023340001
r: 03176925 p: 13.057 pid: 32977 b: WERA q: 0 st: lt: 15 ean: 4013288213020 sr: WERA 05020216001 sr_no_br: 05020216001 sr_no_br_cl: 05020216001 sr_cl: WERA05020216001 sr_dash: sold: 13.057 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 5/8" Length 182 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker Imperial ring spanner inch (5/8" x 182 mm) - 05020216001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, Imperial, 5/8" x 182 mm kts: ring spanner inch (5/8" x 182 mm) kpn: 6003 Joker Imperial kpn_dash: kpn_clear: 6003JokerImperial bkpn: WERA 6003 Joker Imperial bkpn_clear: WERA 6003JokerImperial c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020216001 sr_ns: WERA05020216001
r: 41071196 p: 13.057 pid: 70707 b: WERA q: 0 st: lt: 7 ean: 4013288108104 sr: WERA 05007677001 sr_no_br: 05007677001 sr_no_br_cl: 05007677001 sr_cl: WERA05007677001 sr_dash: sold: 13.057 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 10 mm Blade length 175 mm Blade thickness 1,6 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted n: WERA 334 SK saw blade screwdriver, hexagonal key blade, 1.6 x 10 x 175 mm - 05007677001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdrivers with hexagonal blades. Multi-component Kraftform Plus handle. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Lasertip tips: microscopically roughened surface which bites firmly into the screw head. This means less slipping and less contact pressure being required. Comes with bolster to enable higher torque to be applied. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdriver for slotted screws Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal blade and bolster for higher torque transfer Lasertip tips for more secure fit in the screw head Application Slotted screws Blade Hexagonal with bolster from 0.8 x 4.5 Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Hexagonal blade and bolster for higher torque transfer. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery 334 SK Screwdriver for slotted screws, 1.6 x 10 x 175 mm kts: saw blade screwdriver, hexagonal key blade, 1.6 x 10 x 175 mm kpn: 334 SK kpn_dash: kpn_clear: 334SK bkpn: WERA 334 SK bkpn_clear: WERA 334SK c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05007677001 sr_ns: WERA05007677001
r: 02835456 p: 6.48 pid: 42073 b: WERA q: 0 st: lt: 12 ean: 4013288151704 sr: WERA 05118017001 sr_no_br: 05118017001 sr_no_br_cl: 05118017001 sr_cl: WERA05118017001 sr_dash: sold: 12.96 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size Slotted 2 mm Blade length 50 mm Blade thickness 0,3 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted Product Range Wera Kraftform n: WERA 2035 Micro Kraftform saw cut screwdriver, 0.30 x 2 x 50 mm - 05118017001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro screwdriver for slotted screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Anti-roll feature and rotating cap for rapid twisting The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Application Slotted screws Blade Round Design Chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Indispensable for many users, including electronics technicians, opticians, precision engineers, jewellers, EDP hardware fitters and model-makers ds: dsc: Scope of delivery 2035 Screwdriver for slotted screws for electronic applications, 0.30 x 2 x 50 mm kts: Kraftform saw cut screwdriver, 0.30 x 2 x 50 mm kpn: 2035 Micro kpn_dash: kpn_clear: 2035Micro bkpn: WERA 2035 Micro bkpn_clear: WERA 2035Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118017001 sr_ns: WERA05118017001
r: 02832467 p: 12.892 pid: 42929 b: WERA q: 0 st: lt: 12 ean: 4013288134448 sr: WERA 05017041001 sr_no_br: 05017041001 sr_no_br_cl: 05017041001 sr_cl: WERA05017041001 sr_dash: sold: 12.892 p_range: none type: standard act: 1 avo: 1 av: Drive size PH2 Blade length 113 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Phillips n: WERA 917 SPHS Phillips screwdriver, PH 2 x 113 mm - 05017041001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera Chiseldriver for fastening, chiselling and loosening seized screws. Multi-component Kraftfrom handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. A hexagon blade out of high quality bit material that extends right through the blade ensures full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Comes with an impact cap for durability and reduced risk of splintering. The square take-up in the impact cap enables higher torque transfer when screwdriving with the T-handle, Zyklop ratchet or Mini ratchet. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace and handle markings make for simplified finding and sorting of the tool. Chiseldriver for fastening, chiselling and loosening Multi-component Kraftform handle for fast and ergonomic screwdriving Smooth hard zones for high speed turning, soft grip zones for high torque transfer Hexagonal blade extending through the handle, impact cap with integrated square and bolster The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Phillips screws Blade Hexagonal throughout, impact cap with integrated square socket for insertion of 1/4" blades for higher torque Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hexagonal non-roll feature prevents any rolling away at the workplace. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 917 SPHS Screwdriver for Phillips screws, PH 2 x 113 mm kts: Phillips screwdriver, PH 2 x 113 mm kpn: 917 SPHS kpn_dash: kpn_clear: 917SPHS bkpn: WERA 917 SPHS bkpn_clear: WERA 917SPHS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05017041001 sr_ns: WERA05017041001
r: 08131806 p: 12.892 pid: 173617 b: WERA q: 0 st: lt: 8 ean: 4013288222725 sr: WERA 05007910001 sr_no_br: 05007910001 sr_no_br_cl: 05007910001 sr_cl: WERA05007910001 sr_dash: sold: 12.892 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size PZ2 Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Pozidriv Product Range Wera Kraftform n: WERA 1855 PZ Kraftform Ball-Grip cross-head screwdriver - workplace sling, PZ 2 x 100 mm - 05007910001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Screwdriver with Kraftform series 1800 handle for Pozidriv screws. The handle fits perfectly in the hand. The convex shape allows the transmission of high torques. The soft handle zones ensure a good grip and low-loss power transmission. The hard handle zones allow a high power transmission, even when pressure is applied with the ball of the hand. The recesses at the upper end of the handle facilitate fine adjustment while screwdriving. Due to the narrow transition between handle and blade, even sunken screws in narrow areas can be easily reached. The anti-roll protection at the rear end of the handle hinders the tool from rolling away annoyingly at the workplace. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface "bites" into the screw head which avoids unintentional slipping out of the screw. Screwdriver, for cross-recess screws, Pozidriv Kraftform series 1800 handle for high torques Soft handle zones for high power transmission Hard handle zones for palm pressure Handle recesses for your fingers allow fine adjustment Application Suitable for Pozidriv screws Blade Round Design Nicro matt, Lasertip Handle Kraftform Ball-Grip with anti-roll protection, multi-component. With Take it easy tool finder: Colour coding by profile (black = Pozidriv) and size stamping. Features and benefits It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The ergonomically shaped Kraftform Ball-Grip fits perfectly in the hand. Its convex shape allows the transmission of high torque transfer. The material used for the soft zones of the Kraftform Ball-Grip handle ensures a good grip and low-loss power transmission. The hard handle zones of the Kraftform Ball-Grip allow high power transmission, even when pressure is applied with the ball of the hand. The recesses at the upper end of the Kraftform Ball-Grip allow fine adjustment while screwdriving. Due to the narrow transition between handle and blade, even sunken screws in narrow areas can be easily reached. ds: dsc: Scope of delivery 1855 PZ Kraftform Ball-Grip Pozidriv-head screwdriver, PZ 2 x 100 mm kts: Kraftform Ball-Grip cross-head screwdriver - workplace sling, PZ 2 x 100 mm kpn: 1855 PZ kpn_dash: kpn_clear: 1855PZ bkpn: WERA 1855 PZ bkpn_clear: WERA 1855PZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05007910001 sr_ns: WERA05007910001
r: 03228389 p: 12.892 pid: 70361 b: WERA q: 0 st: lt: 8 ean: 4013288215000 sr: WERA 05136495001 sr_no_br: 05136495001 sr_no_br_cl: 05136495001 sr_cl: WERA05136495001 sr_dash: sold: 12.892 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Accessory/Part type Roll-up pouch For Joker 6003 (8 pieces) Product Range Wera Joker n: WERA 9442 roll case for 6003 Joker 8, empty, 295 x 95 mm - 05136495001 cn: ACCESSORY/PART WRENCH cn2: ACCESSORY/PART WRENCH cn_clear: ACCESSORYPARTWRENCH d: Product description Robust folding bag for space-saving tool storage; ideal for mobile use, as the material used is light and firm; for 8 Joker 6003 spanners; empty Robust material and low weight ensure optimal transport Strong hook and loop fastener system to prevent unintentional opening and therefore loss of the tool The pouch can be hung up even while open using the hanging loop Compatible with Wera 2go Features and benefits The material used is distinguished by its high level of robustness. The mesh pouches hold the tools securely and reliably. The size marking can be seen through the mesh material. The textile box features a fleece zone at the back. Using the provided self-adhesive hook and loop fastener strips, the textile box can be attached to the Wera 2go components. Or to the wall, shelf or workshop trolley. ds: dsc: Scope of delivery 9442 Roll pouch 6003 Joker 8, empty, 295 x 95 mm kts: roll case for 6003 Joker 8, empty, 295 x 95 mm kpn: 9442 kpn_dash: kpn_clear: 9442 bkpn: WERA 9442 bkpn_clear: WERA 9442 c_path: Home / Tools / Hand tools / Keys / Accessories and spare parts / Accessory/part wrench | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera accessories and spare parts / Wera accessory/part wrench | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05136495001 sr_ns: WERA05136495001
r: 02822394 p: 6.446 pid: 45045 b: WERA q: 0 st: lt: 12 ean: 4013288112729 sr: WERA 05135270001 sr_no_br: 05135270001 sr_no_br_cl: 05135270001 sr_cl: WERA05135270001 sr_dash: sold: 12.892 p_range: none type: standard act: 1 avo: 1 av: Length 44 mm Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 4 mm Connection profile (bit) Halfmoon VDE approved No Bit tip PH00 Drive profile size (bit) 00 n: WERA 851/9 C bit Phillips, Halfmoon, PH 00 x 44 mm - 05135270001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits with 4 mm halfmoon drive. Optimised for Japanese PH screws. Hard design. For Phillips screws Optimised for Japanese Phillips screws Hard design 4 mm halfmoon drive (Wera connecting series 9) Application Phillips screws Drive Halfmoon, 4 mm Design Hard Features and benefits Halfmoon, 4mm, Wera Series 9. Drive: For direct machine drive. Suitable for: Delvo, Densei etc. ds: dsc: Scope of delivery 851/9 C J PH bits, halfmoon, PH 00 x 44 x 1.8 mm kts: bit Phillips, Halfmoon, PH 00 x 44 mm kpn: 851/9 C kpn_dash: kpn_clear: 8519C bkpn: WERA 851/9 C bkpn_clear: WERA 8519C c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05135270001 sr_ns: WERA05135270001
r: 41071191 p: 6.446 pid: 71813 b: WERA q: 0 st: lt: 12 ean: 4013288108050 sr: WERA 05007672001 sr_no_br: 05007672001 sr_no_br_cl: 05007672001 sr_cl: WERA05007672001 sr_dash: sold: 12.892 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 4,5 mm Blade length 90 mm Blade thickness 0,8 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted n: WERA 334 SK saw blade screwdriver, hexagonal key blade, 0.8 x 4.5 x 90 mm - 05007672001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdrivers with hexagonal blades. Multi-component Kraftform Plus handle. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Lasertip tips: microscopically roughened surface which bites firmly into the screw head. This means less slipping and less contact pressure being required. Comes with bolster to enable higher torque to be applied. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdriver for slotted screws Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal blade and bolster for higher torque transfer Lasertip tips for more secure fit in the screw head Application Slotted screws Blade Hexagonal with bolster from 0.8 x 4.5 Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Hexagonal blade and bolster for higher torque transfer. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery 334 SK Screwdriver for slotted screws, 0.8 x 4.5 x 90 mm kts: saw blade screwdriver, hexagonal key blade, 0.8 x 4.5 x 90 mm kpn: 334 SK kpn_dash: kpn_clear: 334SK bkpn: WERA 334 SK bkpn_clear: WERA 334SK c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05007672001 sr_ns: WERA05007672001
r: 03226368 p: 12.727 pid: 70150 b: WERA q: 0 st: lt: 11 ean: 4013288097040 sr: WERA 05347743001 sr_no_br: 05347743001 sr_no_br_cl: 05347743001 sr_cl: WERA05347743001 sr_dash: sold: 12.727 p_range: none type: standard act: 1 avo: 1 av: Drive size PZ2 Blade length 250 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Pozidriv n: WERA 355 PZ Pozidriv screwdriver, PZ 2 x 250 mm - 05347743001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver by Wera. Hard handle zones for high working speeds, soft handle zones for a high torque transfer and for fast and smooth work. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface "bites" into the screw head and unintentional slipping is a thing of the past. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Screwdriver, for cross-recess screws, Pozidriv Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Application Suitable for Pozidriv screws Blade Round Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (black = Pozidriv) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 355 PZ Screwdriver for Pozidriv screws, PZ 2 x 250 mm kts: Pozidriv screwdriver, PZ 2 x 250 mm kpn: 355 PZ kpn_dash: kpn_clear: 355PZ bkpn: WERA 355 PZ bkpn_clear: WERA 355PZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05347743001 sr_ns: WERA05347743001
r: 02830658 p: 12.727 pid: 43173 b: WERA q: 0 st: lt: 9 ean: 4013288181220 sr: WERA 05100031001 sr_no_br: 05100031001 sr_no_br_cl: 05100031001 sr_cl: WERA05100031001 sr_dash: sold: 12.727 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 8 mm Drive type Slotted Blade length 175 mm Blade thickness 1,2 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V n: WERA 334 SB saw blade screwdriver, garage blade, 1.2 x 8 x 175 mm - 05100031001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform Plus handle for comfortable ergonomic screwdriving, avoiding blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface "bites" into the screw head and unintentional slipping is a thing of the past. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Screwdriver for slotted screws Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal blade and bolster for higher torque transfer Lasertip tips for more secure fit in the screw head Application Slotted screws Blade Round Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component, sizes 2.0 x 12.0, 2.5 x 14.0: Kraftform with non-roll feature, single-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. ds: dsc: Scope of delivery 334 SB Screwdriver for slotted screws, 1.2 x 8 x 175 mm kts: saw blade screwdriver, garage blade, 1.2 x 8 x 175 mm kpn: 334 SB kpn_dash: kpn_clear: 334SB bkpn: WERA 334 SB bkpn_clear: WERA 334SB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05100031001 sr_ns: WERA05100031001
r: 02830533 p: 12.561 pid: 44601 b: WERA q: 0 st: lt: 12 ean: 4013288179418 sr: WERA 05020132001 sr_no_br: 05020132001 sr_no_br_cl: 05020132001 sr_cl: WERA05020132001 sr_dash: sold: 12.561 p_range: none type: standard act: 1 avo: 1 av: Drive size PZ/S 1 Blade length 80 mm Blade thickness ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No Drive type Pozidriv/Slotted n: WERA 165 iSS PZ/S VDE insulated screwdriver for PlusMinus screws, extra narrow handle, square 1 x 80 mm - 05020132001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description VDE insulated slotted screwdriver with reduced blade and handle diameter, suitable for actuating low-lying screws in particularly confined working spaces. Multi-component Kraftform Plus handle for fast and low-fatigue working: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Individual testing at 10,000 volts so as to ensure safe working at the permitted voltage of 1,000 volts. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Reduced blade and handle diameter Application For PlusMinus screws (Pozidriv/slotted) Blade Reduced blade diameter with integrated protective insulation, allows sunken PlusMinus screws to be accessed and actuated, individually tested as per IEC 60900 Design PlusMinus (Pozidriv/slotted), blade zinc-phosphated Handle Kraftform with non-roll feature, multi-component Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. The super slim screwdrivers for installation jobs in particularly confined spaces. Not only do the blades have a reduced diameter, the handles also have a very slim design. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces - resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. ds: dsc: Scope of delivery 165 iSS PZ/S VDE Insulated screwdriver with reduced blade diameter for PlusMinus screws (Pozidriv/slotted), # 1 x 80 mm kts: VDE insulated screwdriver for PlusMinus screws, extra narrow handle, square 1 x 80 mm kpn: 165 iSS PZ/S kpn_dash: kpn_clear: 165iSSPZS bkpn: WERA 165 iSS PZ/S bkpn_clear: WERA 165iSSPZS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05020132001 sr_ns: WERA05020132001
r: 08103796 p: 12.38 pid: 70971 b: WERA q: 0 st: lt: 8 ean: 4013288227348 sr: WERA 05005513001 sr_no_br: 05005513001 sr_no_br_cl: 05005513001 sr_cl: WERA05005513001 sr_dash: sold: 12.38 p_range: none type: standard act: 1 avo: 1 av: Socket size 24 mm Type of drive profile (socket) Hexagonal Connection size 3/8" Length 32 mm n: WERA 8790 B Impaktor cap with 3/8" drive, 24 x 32 mm - 05005513001 cn: IMPACT SOCKET cn2: IMPACT SOCKET cn_clear: IMPACTSOCKET d: Product description Impaktor socket wrench insert for use with electric or pneumatic wrenches with 3/8" drive. The Impaktor technology ensures a higher-than-average service life even at extreme requirements. With Take it easy Tool finder with colour coding by size - for quick and easy identification of the required tool. With hexagon profile and socket with hole. The hexagon profile offers the transmission of high forces and loads the edges of the bolt or the screw head less than a double hexagon profile. For external hexagon bolts and screws. For use with electric or pneumatic wrenches with 3/8" drive Impaktor technology for above-average service life Hexagon profile allows precise and profile-friendly screwdriving with high power transmission With Take it easy tool finder: colour coding by size With cross hole and ring socket to attach the safety pin and safety ring of machine operated tools Application For external hexagon bolts and screws Design For use with electric or pneumatic impact wrenches with 3/8" drive, with retaining pin hole, chrome-molybdenum, matt black finish. Take it easy tool finder: Colour coding to enable the desired socket to be easily located. Features and benefits The Impaktor technology ensures above-average service life of the Impaktor socket wrench plug-ins even under extreme conditions. Thanks to the hole and the ring socket, the tools can be held securely on the power tool with a safety pin or an O-ring. The hexagon profile offers the transmission of high forces and loads the edges of the bolt or the screw head less than a double hexagon profile. Fine-toothed ratchets also make use of a double hexagon profile superfluous, even in confined spaces, thanks to their small return angle. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 8790 B Impaktor socket with 3/8" drive, 24 x 32 mm kts: Impaktor cap with 3/8" drive, 24 x 32 mm kpn: 8790 B kpn_dash: kpn_clear: 8790B bkpn: WERA 8790 B bkpn_clear: WERA 8790B c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Impact socket | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera impact socket sr_no_br_cl_ns: 05005513001 sr_ns: WERA05005513001
r: 02836300 p: 12.35 pid: 4593 b: WERA q: 0 st: lt: 12 ean: 4013288181039 sr: WERA 05003734001 sr_no_br: 05003734001 sr_no_br_cl: 05003734001 sr_cl: WERA05003734001 sr_dash: sold: 12.35 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Socket size 14 mm Connection size 1/2" Connection profile Inner square Length 37 mm VDE approved No With safety colour code 1000V Non-sparking No Magnetic No Type of drive profile (socket) Hexagonal Product Range Wera Zyklop n: WERA 8790 HMC HF Zyklop hand and machine cap with 1/2" drive with holding function 14 x 37 mm - 05003734001 cn: HAND SOCKET cn2: HAND SOCKET cn_clear: HANDSOCKET d: Product description Zyklop socket with 1/2" drive and holding function for extremely convenient screwdriving with reduced risk of losing the screw when addressing the workpiece. Take it easy Tool Finder with colour coding according to size - for simple and rapid accessing of the required tool. Socket (non-impact) for manual or power tool operations The holding function holds screws securely on the tool With Take it easy tool finder: colour coding by size Chrome vanadium steel, matte chrome-plated Equipped with ball stop groove, knurling at lower end for better gripping Application Hexagon headed bolts, screws and nuts Design Manual and (non-impact) machine applications, ball intercept ring, knurls at base for precision handling in manual operations, with holding function, chrome vanadium, brushed chrome-plated finish. Take it easy tool finder: Colour coding and large stamp to enable the desired socket to be easily located. Features and benefits Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The manual and machine sockets can be used both for hand and power tools use (non-impact). Users need just one socket set for all applications. The clamping of the screw is achieved by a twin spring loaded ball retention system. The tubing is effectively protected against mechanical wear and tear by a steel ring. The holding function is especially helpful in confined, hard-to-reach spaces, where there is no room for a second hand to secure the screw. ds: dsc: Scope of delivery 8790 HMC HF Zyklop socket with 1/2" drive with holding function, 14 x 37 mm kts: Zyklop hand and machine cap with 1/2" drive with holding function 14 x 37 mm kpn: 8790 HMC HF kpn_dash: kpn_clear: 8790HMCHF bkpn: WERA 8790 HMC HF bkpn_clear: WERA 8790HMCHF c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Hand socket | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera hand socket | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05003734001 sr_ns: WERA05003734001
r: 02829546 p: 12.33 pid: 19020 b: WERA q: 0 st: lt: 12 ean: 4013288100061 sr: WERA 05002980001 sr_no_br: 05002980001 sr_no_br_cl: 05002980001 sr_cl: WERA05002980001 sr_dash: sold: 12.33 p_range: none type: standard act: 1 avo: 1 av: Length 175 mm Connection size (bit) 6 mm Drive profile size 1 (bit) 1 Bit tip 1 #1 Connection profile (bit) Hexagonal Bit tip 2 #2 Blade thickness 2 Blade thickness 1 Type of drive profile 2 (bit) Square Type of drive profile 1 (bit) Square Drive profile size 2 (bit) 2 n: WERA 68 combikling, square 1 x 175 mm - 05002980001 cn: DOUBLE-ENDED BIT cn2: DOUBLE-ENDED BIT cn_clear: DOUBLEENDEDBIT d: Product description Combination blade for Vario handles. The double-ended blades are made out of high quality bit material and are therefore particularly durable. The Wera Black Point tip offers a perfect fit and optimised corrosion protection. Combination blade square/square for Vario handle Chrome-plated hexagonal material, 6 mm Black Point tip offers a perfect fit with optimised corrosion protection 2 different drive sizes on one blade Application For square socket screws Blade 6 mm hexagon Design Chrome-plated, Black Point Features and benefits The 6 mm double-ended blades of 175 mm length are out of high quality bit material which gives them a particularly long service life. ds: dsc: Scope of delivery 68 Combination blade for square socket head screws, # 1 x 175 mm kts: combikling, square 1 x 175 mm kpn: 68 kpn_dash: kpn_clear: 68 bkpn: WERA 68 bkpn_clear: WERA 68 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Double-ended bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera double-ended bit sr_no_br_cl_ns: 05002980001 sr_ns: WERA05002980001
r: 41071139 p: 12.33 pid: 19060 b: WERA q: 0 st: lt: 13 ean: 4013288000644 sr: WERA 05002970001 sr_no_br: 05002970001 sr_no_br_cl: 05002970001 sr_cl: WERA05002970001 sr_dash: sold: 12.33 p_range: none type: standard act: 1 avo: 1 av: Length 175 mm Connection size (bit) 6 mm Drive profile size 1 (bit) 10 Bit tip 1 T10 Connection profile (bit) Hexagonal Bit tip 2 T15 Blade thickness 2 Blade thickness 1 Type of drive profile 2 (bit) Torx Type of drive profile 1 (bit) Torx Drive profile size 2 (bit) 15 n: WERA 87 combi ring, TX 10 x TX 15 x 175 mm - 05002970001 cn: DOUBLE-ENDED BIT cn2: DOUBLE-ENDED BIT cn_clear: DOUBLEENDEDBIT d: Product description Combination blade for Vario handles. The double-ended blades are made out of high quality bit material and are therefore particularly durable. The Wera Black Point tip offers a perfect fit and optimised corrosion protection. Combination blade TORX®/TORX® for Vario handle Chrome-plated hexagonal material, 6 mm Black Point tip offers a perfect fit with optimised corrosion protection 2 different drive sizes on one blade Application TORX® socket screws Blade 6 mm hexagon Design Chrome-plated, Black Point Features and benefits The 6 mm double-ended blades of 175 mm length are out of high quality bit material which gives them a particularly long service life. ds: dsc: Scope of delivery 87 Combination blade for TORX® screws, TX 10 x TX 15 x 175 mm kts: combi ring, TX 10 x TX 15 x 175 mm kpn: 87 kpn_dash: kpn_clear: 87 bkpn: WERA 87 bkpn_clear: WERA 87 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Double-ended bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera double-ended bit sr_no_br_cl_ns: 05002970001 sr_ns: WERA05002970001
