- Max. measuring value: 10 mm
- Scale division: 0,01 mm
- Accuracy: ± 15 µm
Dial depth gauges and mechanical depth gauges up to 300 mm
Analogue depth gauges and dial depth gauges measure the depth of bores, slots, grooves and steps in a workpiece. They are used in metalworking, quality control and toolmaking, wherever a readable measurement is needed without a battery.
Choose the measuring range first. Dial depth gauges with a range of 0 to 10 mm measure shallow steps and small bores, versions of 0 to 200 or 0 to 210 mm measure deeper holes. A mechanical depth gauge in stainless steel goes up to 300 mm. Then look at the bridge piece or base the instrument rests on: a 63.5 mm bridge suits narrow surfaces, 101.6 or 150 mm sits more stably on larger workpieces. There are also versions with a round base and with a reverse spindle.
The contact point decides what you can measure: a needle-shaped contact point reaches into narrow grooves, a ball-shaped contact point gives a stable point on flat bottoms. A brass profile depth gauge is meant for measuring profile depth. The brands are Mitutoyo, Xhander and Gedore Red. These gauges belong to the analogue measuring instruments.
MITUTOYO 7211A dial for depth measurement 0-200mm with ball-shaped contact point bridge piece 63,5mm
- Max. measuring value: 200 mm
- Scale division: 0,01 mm
- Accuracy: ± 15 µm
- Max. measuring value: 10 mm
- Scale division: 0,01 mm
- Accuracy: ± 15 µm
- Max. measuring value: 210 mm
- Scale division: 0,01 mm
- Accuracy: ± 30 µm
- Max. measuring value: 10
- Scale division: 0,01 mm
- Accuracy: ± 15 µm
- Max. measuring value: 200 mm
- Scale division: 0,01 mm
- Accuracy: ± 15 µm
- Max. measuring value: 200 mm
- Scale division: 0,01 mm
- Accuracy: ± 15 µm
- Max. measuring value: 210 mm
- Scale division: 0,01 mm
- Accuracy: ± 30 µm
- Max. measuring value: 200 mm
- Scale division: 0,01 mm
- Accuracy: ± 15 µm
- Max. measuring value: 10 mm
- Max. measuring value: 300 mm
- Accuracy: 0,02 mm
- Max. measuring value: 30 mm
- Scale division: 0,1 mm