r: 03172699 p: 19.669 pid: 176117 b: FISCHER q: 9 st: 1 lt: 1 ean: 4048962417579 sr: FISCHER 558752 sr_no_br: 558752 sr_no_br_cl: 558752 sr_cl: FISCHER558752 sr_dash: sold: 177.021 p_range: none type: standard act: 1 avo: 1 av: Net volume 360 ml Principal hazard property GHS07 Harmful or irritant Relative density 1,7 - 1,8 Packaging Cartridge ADR class 9 UN number UN3077 ADR packing group III Conseils de prudence (P) P101; P102; P280; P501; P273; P391 H-statements H315; H317; H319; H410 Hazard class GHS07 Harmful or irritant; GHS09 Environmental hazard Physical state Solid Flash point > 100 °C n: FISCHER 558752 injection mortar FIS V Plus 360 S cn: INJECTION MORTAR cn2: INJECTION MORTAR cn_clear: INJECTIONMORTAR d: Product description The powerful universal mortar for concrete and masonry. The fischer high-performance mortar FIS V Plus is the universal all-rounder for the highest requirements. The styrene-free vinyl ester hybrid mortar with its numerous fixing elements is approved for fixations in cracked and non-cracked concrete as well as in masonry. However, the injection mortar is also used with the approved system components for rebar connections, the fischer remedial wall tie VBS 8, the fischer weather facing wall tie FWS II, and the stand-off installation system TherMax. The variant FIS VS Plus Low Speed enables an extended processing time at higher processing temperatures or a greater drill hole depth. The shorter hardening time of the variant FIS VW Plus High Speed enables swift work progress even at low temperatures. ETA approval for post-installed rebar connections Injection mortar system with approval for all relevant building materials Maximum load absorption for much greater security Approved service life of 100 years Application in water-filled boreholes The FIS V Plus injection mortar has numerous system approvals, such as in cracked and non-cracked concrete, masonry and for special applications The ETA assessment for a service life of 100 years offers permanent safety for all applications The approved use in water-filled drill holes enables a wide range of applications, even under harsh environmental conditions FIS VW Plus High Speed has a significantly shorter hardening time than FIS V Plus, which ensures swift work progress even at low temperatures The FIS VS Plus Low Speed has an extended processing time that prevents the premature hardening of the mortar at higher temperatures. It is ideally suited to large drill hole depths The extensive range of accessories is ideally suited to the FIS V Plus injection mortar family, increases the great flexibility of the system and thus allows for a broad range of applications Suitable for FIS V Plus is a 2-component injection mortar based on a vinyl ester hybrid concept Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer The mortar is extruded bubble free from the drill hole base The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole The injection cartridges are quick and easy to use with the fischer dispensers Partially used cartridges can be reused by changing the static mixer Building materials Approved for anchorings in: Concrete C20/25 to C50/60, cracked and non-cracked Hollow blocks made from lightweight concrete Hollow blocks made from concrete Vertically perforated brick Perforated sand-lime brick Solid sand-lime brick Aerated concrete Solid brick Approved for: Rebar connections Remedial wall tie VBS 8 Weather facing reconstruction system FWS II Stand-off installation TherMax Application Steelwork constructions Timber constructions Guard rails Façades Staircases Steel brackets Machines Masts Awnings Canopies Gates Consoles Pipelines Gratings Satellite antennas ds: dsc: Scope of delivery 1x Injection mortar FIS V Plus 360 S 2x FIS MR PLUS mixing nozzle kts: injection mortar FIS V Plus 360 S kpn: 558752 kpn_dash: kpn_clear: 558752 bkpn: FISCHER 558752 bkpn_clear: FISCHER 558752 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Injection mortar | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer injection mortar sr_no_br_cl_ns: 558752 sr_ns: FISCHER558752
r: 02020738 p: 17.19 pid: 13442 b: FISCHER q: 0 st: lt: 8 ean: 4006209920206 sr: FISCHER 92020 sr_no_br: 92020 sr_no_br_cl: 92020 sr_cl: FISCHER92020 sr_dash: sold: 171.9 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 16 mm Anchoring depth 125 mm Width across flats 24 mm Effective length 10 - 25 mm Drill hole depth 155 mm Drilling diameter 18 mm n: FISCHER 92020 highbond anchor FHB-A dynamic 16 x 125/25 ev cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The highest performance in class amongst dynamic anchors The fischer Highbond anchor dynamic FHB-A dyn is made of zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. During the setting process, the injection mortar FIS HB fills the annular gap in the fixture, and guarantees optimum load distribution. This allows for the absorption of dynamic alternating loads. The fischer Highbond anchor dynamic FHB-A dyn is ideally suited for fixing guide rails for elevators, industrial robots, or mobile portal and ceiling cranes in internal areas. Controlled expansion under dynamic stress due to cone shape Absorption of dynamic alternating loads via optimum load distribution Approved for cracked concrete The Highbond-anchor dynamic FHB-A dyn must be applied in combination with the Highbond-mortar FIS HB During the setting process, the injection mortar FIS HB fills the annular gap in the fixture, and ensures optimum load distribution. This allows for the absorption of dynamic alternating loads The cone shape of the FHB-A dyn anchor rod ensures a controlled expansion under dynamic stress, thus allowing for use in cracked concrete The anchor rod FHB-A dyn is also available made from high corrosion-resistant steel. This makes it suitable for use in aggressive atmospheres, for example in tunnels The Highbond anchor dynamic system can achieve even greater shear loads thanks to the additional sleeve of the anchor rod FHB-A dyn V, and therefore provides an increased level of safety The ETA for static and quasi-static loads allows the use of sizes M12 and M16 also for the anchoring base steel fiber concrete Suitable for The injection system suitable for tensile zones consists of the Highbond dynamic anchor rod FHB-A dyn and the injection mortar FIS HB FHB dyn is approved for pre-positioned and push-through installation Extruding the mortar causes the two components to be mixed and activated in the static mixer The mortar bonds the entire surface of the anchor rod with the drill hole wall and seals the drill hole The centring sleeve centres the anchor in the fixture, thus ensuring a safe load application The lock nut prevents the nut from becoming loose Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Steel fiber reinforced concrete (M12 / M16) Application Jib cranes Gantry and overhead cranes Guide rails for elevators Tunnel ventilators (jet fans) Gantries in road construction Antennas and transmitter masts Industrial robots ds: dsc: kts: highbond anchor FHB-A dynamic 16 x 125/25 ev kpn: 92020 kpn_dash: kpn_clear: 92020 bkpn: FISCHER 92020 bkpn_clear: FISCHER 92020 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 92020 sr_ns: FISCHER92020
r: 87051416 p: 0.94 pid: 17143 b: FISCHER q: 0 st: lt: 10 ean: 4006209685259 sr: FISCHER 68525 sr_no_br: 68525 sr_no_br_cl: 68525 sr_cl: FISCHER68525 sr_dash: sold: 169.2 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Overall length 115 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 10 mm n: FISCHER FSA 10x110/60 S sleeve anchor with hex bolt electrolytically zinc plated - 68525 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with hexagonal screw for structural fixings in non-cracked concrete. The fischer sleeve anchor FSA-S is a zinc-plated steel anchor with hexagonal screw for structural fixings. The FSA-S is set in the time-saving through-type installation. When tightening, the cone is pulled into the expansion sleeve and expands it against the hole wall. The recesses act as a crumple zone to take the torque slippage. The fixture is therefore pulled towards the anchoring base. The fischer sleeve anchor FSA-S is ideal for fastening fixings that are not relevant in safety terms such as consoles, handrails, or cable trays. Simple alignment due to optimised anchor geometry, even in narrow spaces Surface flush removal due to detachable screw connection With hexagon screw The optimised geometry minimises setting energy and enables the use in extremely narrow spaces. This allows for user-friendly installation The anchor design makes it possible to use different head shapes for flexible design solutions: Hexagon head (type S), bolt version with nut and washer (type B) The detachable screw connection allows for surface flush removal Suitable for The FSA is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The half-moon shaped recesses act as a crumple zone to take the torque slippage, so that the attachment is pulled onto the anchor base Building materials Suitable for: Concrete C12/15 to C20/25, non-cracked Natural stone with dense structure Application Handrails Consoles Ladders Cable trays Gates Façades Temporary or structural fixings ds: dsc: kts: sleeve anchor with hex bolt electrolytically zinc plated kpn: FSA 10x110/60 S kpn_dash: kpn_clear: FSA10x11060S bkpn: FISCHER FSA 10x110/60 S bkpn_clear: FISCHER FSA10x11060S c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 68525 sr_ns: FISCHER68525
r: 87990825 p: 0.94 pid: 17557 b: FISCHER q: 0 st: lt: 8 ean: 4006209484067 sr: FISCHER 48406 sr_no_br: 48406 sr_no_br_cl: 48406 sr_cl: FISCHER48406 sr_dash: sold: 164.5 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 12 mm Drilling diameter 15 mm n: FISCHER EA II M12x50 strike anchor electrolytically galvanised steel - 48406 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The internally threaded anchor with a rim for simple Hammerset installation. The fischer Hammerset anchor EA II is an internal threaded anchor made of zinc-plated steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EHS Plus or the machine setting tool EMS the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer Hammerset anchor EA II is ideal for fixing sprinkler systems, gratings, and consoles in internal areas with approval. Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve Use of standard metric screws and threaded rods lowers complexity Power-saving series installation with machine setting tool EA II S-SDS Visual control due to embossing ETA approval for non-cracked concrete and multiple fixings The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use The EMS machine setting tool allows for effortless installation, particularly in the case of series installations The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety Fixing point at hef 25 mm prevents anchor of falling out of the drill hole before being expanded The black fixing point prevents the anchor from falling out of the drill hole during overhead installation Suitable for The EA II is suitable for pre-positioned installation Position the hammerset anchor in the drill hole and drive in flush to the surface of the anchor base using the hammer The sleeve is then expanded by driving in the internal bolt with the EHS Plus setting tool (alternative: EMS machine setting tool), and expanded against the drill hole wall The setting tools must sit on the rim of the anchor to ensure correct expansion Building materials Approved for: Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Pipelines and ventilation ducts Sprinkler systems Cable conduits and wires Gratings Steel constructions Machines Consoles Shuttering props ds: dsc: kts: strike anchor electrolytically galvanised steel kpn: EA II M12x50 kpn_dash: kpn_clear: EAIIM12x50 bkpn: FISCHER EA II M12x50 bkpn_clear: FISCHER EAIIM12x50 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 48406 sr_ns: FISCHER48406
r: 87940019 p: 0.41 pid: 17145 b: FISCHER q: 0 st: lt: 1 ean: 4006209482841 sr: FISCHER 48284 sr_no_br: 48284 sr_no_br_cl: 48284 sr_cl: FISCHER48284 sr_dash: sold: 164 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Drilling diameter 10 mm n: FISCHER EA II M8x30 weft anchor zinc plated - 48284 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The internally threaded anchor with a rim for simple Hammerset installation. The fischer Hammerset anchor EA II is an internal threaded anchor made of zinc-plated steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EHS Plus or the machine setting tool EMS the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer Hammerset anchor EA II is ideal for fixing sprinkler systems, gratings, and consoles in internal areas with approval. Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve Use of standard metric screws and threaded rods lowers complexity Power-saving series installation with machine setting tool EA II S-SDS Visual control due to embossing ETA approval for non-cracked concrete and multiple fixings The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use The EMS machine setting tool allows for effortless installation, particularly in the case of series installations The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety Fixing point at hef 25 mm prevents anchor of falling out of the drill hole before being expanded The black fixing point prevents the anchor from falling out of the drill hole during overhead installation Suitable for The EA II is suitable for pre-positioned installation Position the hammerset anchor in the drill hole and drive in flush to the surface of the anchor base using the hammer The sleeve is then expanded by driving in the internal bolt with the EHS Plus setting tool (alternative: EMS machine setting tool), and expanded against the drill hole wall The setting tools must sit on the rim of the anchor to ensure correct expansion Building materials Approved for: Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Pipelines and ventilation ducts Sprinkler systems Cable conduits and wires Gratings Steel constructions Machines Consoles Shuttering props ds: dsc: kts: weft anchor zinc plated kpn: EA II M8x30 kpn_dash: kpn_clear: EAIIM8x30 bkpn: FISCHER EA II M8x30 bkpn_clear: FISCHER EAIIM8x30 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 48284 sr_ns: FISCHER48284
r: 87051119 p: 1.35 pid: 75722 b: FISCHER q: 100 st: 1 lt: 1 ean: 4006209445587 sr: FISCHER 44558 sr_no_br: 44558 sr_no_br_cl: 44558 sr_cl: FISCHER44558 sr_dash: sold: 162 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 20/35 mm Overall length 116 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread designation M12 n: FISCHER 44558 rapid-action anchor FBN II 12/20 electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The cost-efficient fixing for flexible use in non-cracked concrete The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel design, the bolt anchor is suitable for façade sub-structures, cantilevers and ladders outside. The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment Suitable for The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut) When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The head embossing offers a simple control of the anchoring In the case of series installation, we recommend using the FABS bolt anchor setting tool Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: rapid-action anchor FBN II 12/20 electrolytically galvanised steel kpn: 44558 kpn_dash: kpn_clear: 44558 bkpn: FISCHER 44558 bkpn_clear: FISCHER 44558 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 44558 sr_ns: FISCHER44558
r: 02020220 p: 16.198 pid: 17063 b: FISCHER q: 0 st: lt: 8 ean: 4006209970386 sr: FISCHER 97038 sr_no_br: 97038 sr_no_br_cl: 97038 sr_cl: FISCHER97038 sr_dash: sold: 161.98 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 16 mm Length 160 mm Anchoring depth 160 mm Width across flats 24 mm Effective length 60 mm Drill hole depth 175 mm Drilling diameter 18 mm n: FISCHER 97038 highbond anchor FHB II-A L M16 x 160/60 ev cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete for maximum tensile loads. The fischer Highbond rod anchor FHB II-A L is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that large machines and heavy steel constructions are securely installed within internal areas. Maximum load values due to large anchorage depth. This means fewer fixing points and smaller anchor plates are required Optimised anchor rod for the highest tensile loads Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools Suitable for The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Machines Silo installations Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: highbond anchor FHB II-A L M16 x 160/60 ev kpn: 97038 kpn_dash: kpn_clear: 97038 bkpn: FISCHER 97038 bkpn_clear: FISCHER 97038 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97038 sr_ns: FISCHER97038
r: 02020175 p: 3.99 pid: 17041 b: FISCHER q: 0 st: lt: 8 ean: 4006209970720 sr: FISCHER 97072 sr_no_br: 97072 sr_no_br_cl: 97072 sr_cl: FISCHER97072 sr_dash: sold: 159.6 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Anchoring depth 60 mm Width across flats 17 mm Effective length 10 mm Drill hole depth 75 mm Drilling diameter 10 mm n: FISCHER 97072 highbond anchor FHB II-A S M10 x 60/10 ev cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete with the least installation effort. The fischer Highbond rod anchor FHB II-A S is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that railings, machines and heavy steel constructions are securely installed within internal areas. Reduces anchorage depth, lowers expense when drilling and installing. This saves costs Through-type installations without additional aids. This saves time Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application Suitable for The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Suitable for: Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions Ideal for: Push-through installation ds: dsc: kts: highbond anchor FHB II-A S M10 x 60/10 ev kpn: 97072 kpn_dash: kpn_clear: 97072 bkpn: FISCHER 97072 bkpn_clear: FISCHER 97072 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97072 sr_ns: FISCHER97072
r: 02020568 p: 7.52 pid: 16002 b: FISCHER q: 0 st: lt: 8 ean: 4006209972984 sr: FISCHER 97298 sr_no_br: 97298 sr_no_br_cl: 97298 sr_cl: FISCHER97298 sr_dash: sold: 150.4 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Anchoring depth 60 mm Width across flats 13 mm Effective length 10 mm Drill hole depth 75 mm Drilling diameter 10 mm n: FISCHER 97298 highbond anchor FHB II-A L M8 x 60/10 stainless steel A4 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete for maximum tension loads - even outdoors. The fischer Highbond rod anchor FHB II-A L is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, silos, and heavy steel constructions are securely installed within external areas. Maximum load values due to large anchorage depth. This means fewer fixing points and smaller anchor plates are required Optimised anchor rod for the highest tensile loads Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools Suitable for The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Machines Silo installations Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: highbond anchor FHB II-A L M8 x 60/10 stainless steel A4 kpn: 97298 kpn_dash: kpn_clear: 97298 bkpn: FISCHER 97298 bkpn_clear: FISCHER 97298 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97298 sr_ns: FISCHER97298
r: 02020677 p: 2.89 pid: 17116 b: FISCHER q: 0 st: lt: 8 ean: 4048962001013 sr: FISCHER 500548 sr_no_br: 500548 sr_no_br_cl: 500548 sr_cl: FISCHER500548 sr_dash: sold: 144.5 p_range: none type: standard act: 1 avo: 1 av: For diameter 12 mm Conseils de prudence (P) P280 ADR packing group Length 75 mm UN number Principal hazard property GHS07 Harmful or irritant ADR class H-statements H317; H411 Physical state Solid Flash point > 100 °C Drill hole depth 90 mm Drilling diameter 12 mm Hazard class GHS07 Harmful or irritant; GHS09 Environmental hazard n: FISCHER 500548 chemical capsule FHB II-PF 12 x 75 fast-curing cn: CHEMICAL ANCHOR cn2: CHEMICAL ANCHOR cn_clear: CHEMICALANCHOR d: Product description Fast-curing capsule with high performance in cracked concrete. The fischer cartridge FHB II-PF HIGH SPEED is a system component of the fischer Highbond system FHB II for fixing in cracked and non-cracked concrete. The mortar cartridge contains a styrene-free vinyl ester mortar and sets very quickly. The mortar cartridge can be used with the fischer Highbond anchor rods FHB II-A S (standard), Highbond anchor rods FHB II-A L (long) made of zinc-plated steel, made of stainless steel, and made of highly corrosion-resistant steel. The fischer rod anchor are set with the setting tool RA-SDS through rotating and hitting motions using a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that façades, machines, and steel constructions are securely installed within internal and external areas. Same load level as with injection mortar - but without drill hole cleaning Very fast curing. This mainly lowers waiting time for series installations Maximum load values in cracked concrete. Thus fewer fixing points are necessary Pre-portioned quantities are especially cost-effective for individual fixings. This reduces installation time and lowers costs ETA approval for cracked concrete The pre-portioned resin capsule FHB II-P can be used in uncleaned drill holes, making it the economical and quick solution It is also ideal for individual applications or under water The special formulation used in the resin capsule FHB II-PF HIGH SPEED ensures particularly fast setting and thus large time savings Suitable for The resin capsules FHB II-P and FHB II-PF HIGH SPEED are suitable for pre-positioned installation When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool for this When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: chemical capsule FHB II-PF 12 x 75 fast-curing kpn: 500548 kpn_dash: kpn_clear: 500548 bkpn: FISCHER 500548 bkpn_clear: FISCHER 500548 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Chemical anchor | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer chemical anchor sr_no_br_cl_ns: 500548 sr_ns: FISCHER500548
r: 22065400 p: 2.87 pid: 176362 b: FISCHER q: 0 st: lt: 8 ean: 4006209436332 sr: FISCHER 43633 sr_no_br: 43633 sr_no_br_cl: 43633 sr_cl: FISCHER43633 sr_dash: sold: 143.5 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Drilling diameter 18 mm Overall length 85 mm Material Steel Surface treatment Zinc plated Safety anchor Yes Quantity per blister 10 n: FISCHER 43633 female threaded anchor FIS E 15 x 85 M10 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The versatile fixing system with internal threaded anchors for masonry. The internal threaded anchor FIS E is suitable for use in combination with injection mortars in masonry and aerated concrete. The female threaded anchor FIS E allows demountable anchoring without protruding parts and thus offers optimum flexibility. The metric female thread allows the use of common metric bolts or threaded rods. Please note the approvals of the respective mortar. Common metric bolts and threaded rods can be used. This reduces cost and complexity. Disassembly straight to the surface possible. The fastening point can be reused. ETA approval for maximum safety. The fischer Internal Thread Anchor FIS E made of galvanised steel is the system component of choice for use in masonry with the fischer Injection Mortar. The internal threaded anchor is applied manually, by means of small turning movements. In solid brick, the injection mortar adheres the internal threaded sleeve to the wall of the drilled hole over its entire surface. In perforated materials, the mortar is pushed through the grid of the anchor sleeve, creating a perfectly fitting joint in the perforated brick. As a result, the load is transferred to the building material. The use of female threaded anchors FIS E enables dismantling of the assembly piece in line with the surface. Applications Temporary and removable fixings Anchoring with Injection Mortar FIS V in masonry and aerated concrete Building materials Approved for: Solid sand-lime brick Perforated sand-lime brick Solid brick Solid block of light concrete Perforated brick Hollow lightweight concrete block Solid brick Aerated concrete blocks Also suitable for: Solid and lightweight concrete blocks Solid pumice stone and other solid building materials ds: dsc: kts: female threaded anchor FIS E 15 x 85 M10 kpn: 43633 kpn_dash: kpn_clear: 43633 bkpn: FISCHER 43633 bkpn_clear: FISCHER 43633 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 43633 sr_ns: FISCHER43633
r: 87990726 p: 2.73 pid: 176399 b: FISCHER q: 0 st: lt: 4 ean: 4006209502631 sr: FISCHER 50263 sr_no_br: 50263 sr_no_br_cl: 50263 sr_cl: FISCHER50263 sr_dash: sold: 136.5 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Drilling diameter 10 mm Length 110 mm Material Stainless steel Width across flats 13 mm n: FISCHER 50263 anchor rod RG M8 x 110 R stainless steel cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The fischer anchor rod with roof point and external hexagonal socket for both injection mortars and glass capsules Approved in combination with the various mortar patterns or injection mortars for anchoring in cracked and uncracked concrete, solid stone masonry, porous stone masonry and aerated concrete. Threaded rods with beveled edge and hexagon for easy mounting with pre-portioned glass capsule. Stainless steel for outdoor use. The wide range from M8 to M30 makes the RG M very widely applicable, offering great flexibility. The many types of approved steels allow use in all corrosion resistance classes and offer the greatest possible safety in applications. Please note the approvals of the relevant glass capsules and injection mortars. The anchor rod RG M is made of stainless steel. The anchor rod is a system accessory for the various mortar patterns or injection mortar. For individual fixings, the use of the pre-portioned mortar cartridges is particularly efficient. When mounting with the mortar cartridge, the RG M anchor rod is inserted using a rotary-tapping hammer. During installation, the mortar cartridge is broken, mixed and the mortar mass activated. During installation with the injection mortar, the anchor rod is manually pushed into the borehole by means of slight twisting movements. The system is particularly suitable for efficient fixing of machinery, steel structures and support legs outdoors. Applications Anchors with Chemical Capsule RSB and RSB mini Anchors with chemical capsule RM II Anchors with injection mortars FIS SB, FIS EM Plus, FIS V and FIS V Plus Building materials In connection with fischer glass capsules approved or suitable for cracked and uncracked concrete. In connection with various fischer injection mortars approved or suitable for different building materials. ds: dsc: kts: anchor rod RG M8 x 110 R stainless steel kpn: 50263 kpn_dash: kpn_clear: 50263 bkpn: FISCHER 50263 bkpn_clear: FISCHER 50263 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 50263 sr_ns: FISCHER50263
r: 02019171 p: 1.36 pid: 10568 b: FISCHER q: 0 st: lt: 8 ean: 4006209685099 sr: FISCHER 68509 sr_no_br: 68509 sr_no_br_cl: 68509 sr_cl: FISCHER68509 sr_dash: sold: 136 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Overall length 146 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 12 mm n: FISCHER FSA 12x130/75 B sleeve anchor with nut electrolytically zinc plated - 68509 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with nut and washer for structural fixings in non-cracked concrete. The fischer sleeve anchor FSA-B is a zinc-plated steel anchor with nut and washer for structural fixings made of zinc-plated steel. The FSA-B is set in the time-saving through-type installation. When tightening, the cone is pulled into the expansion sleeve and expands it against the hole wall. The recesses act as a crumple zone to take the torque slippage. The fixture is therefore pulled towards the anchoring base. The fischer sleeve anchor FSA-B is ideal for fastening fixings that are not relevant in safety terms such as ladders, gates, and temporary fixings in non-cracked concrete. Simple alignment due to optimised anchor geometry, even in narrow spaces Surface flush removal due to detachable screw connection With nut and washer The optimised geometry minimises setting energy and enables the use in extremely narrow spaces. This allows for user-friendly installation The anchor design makes it possible to use different head shapes for flexible design solutions: Hexagon head (type S), bolt version with nut and washer (type B) The detachable screw connection allows for surface flush removal Suitable for The FSA is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The half-moon shaped recesses act as a crumple zone to take the torque slippage, so that the attachment is pulled onto the anchor base Building materials Suitable for: Concrete C12/15 to C20/25, non-cracked Natural stone with dense structure Application Handrails Consoles Ladders Cable trays Gates Façades Temporary or structural fixings ds: dsc: kts: sleeve anchor with nut electrolytically zinc plated kpn: FSA 12x130/75 B kpn_dash: kpn_clear: FSA12x13075B bkpn: FISCHER FSA 12x130/75 B bkpn_clear: FISCHER FSA12x13075B c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 68509 sr_ns: FISCHER68509
r: 02020217 p: 12.892 pid: 17460 b: FISCHER q: 0 st: lt: 8 ean: 4006209970317 sr: FISCHER 97031 sr_no_br: 97031 sr_no_br_cl: 97031 sr_cl: FISCHER97031 sr_dash: sold: 128.92 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 12 mm Length 120 mm Anchoring depth 120 mm Width across flats 19 mm Effective length 100 mm Drill hole depth 135 mm Drilling diameter 14 mm n: FISCHER 97031 highbond anchor FHB II-A L M12 x 120/100 ev cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete for maximum tensile loads. The fischer Highbond rod anchor FHB II-A L is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that large machines and heavy steel constructions are securely installed within internal areas. Maximum load values due to large anchorage depth. This means fewer fixing points and smaller anchor plates are required Optimised anchor rod for the highest tensile loads Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools Suitable for The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Machines Silo installations Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: highbond anchor FHB II-A L M12 x 120/100 ev kpn: 97031 kpn_dash: kpn_clear: 97031 bkpn: FISCHER 97031 bkpn_clear: FISCHER 97031 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97031 sr_ns: FISCHER97031
r: 02128818 p: 1.57 pid: 2519 b: FISCHER q: 0 st: lt: 7 ean: 4006209467039 sr: FISCHER 46703 sr_no_br: 46703 sr_no_br_cl: 46703 sr_cl: FISCHER46703 sr_dash: sold: 125.6 p_range: none type: standard act: 1 avo: 1 av: Diameter 20 mm Length 130 mm n: FISCHER 46703 injection sleeve plastic FIS H 20x130 K cn: STRAINER SLEEVE cn2: STRAINER SLEEVE cn_clear: STRAINERSLEEVE d: Product description The injection anchor sleeve for particularly sparing mortar usage in perforated brick masonry. The fischer injection anchor sleeve FIS H K is the system component for the professional, mortar-saving installation of the threaded rod FIS A or internal threaded anchor FIS E in perforated brick masonry. The fischer injection mortars FIS V, FIS VW HIGH SPEED, FIS VS LOW SPEED, FIS VL, FIS Green, FIS P Plus, and FIS P can be used with it. The optimised grating structure reduces the use of injection mortar. When the threaded rod and internal threaded anchor are installed, the mortar is pressed through the grating structure and creates a form fit with the perforated brick. This directs the load into the building material. Setting takes place in a pre-positioned installation. You can use the injection anchor sleeve to bridge non-load-bearing layers. The approvals of the various injection mortars must be observed. Lattice structure of anchor sleeves lowers mortar consumption Anchor sleeve allows for optimum mechanical interlock in perforated brick The centring blades fix anchor rods with various diameters. This lowers complexity and simplifies storage Barbed hook: no falling with overhead installations ETA approval The grating structure of the FIS H K anchor sleeve is adapted for the injection mortars FIS V Plus,FIS V,FIS VL, FIS Green and FIS P Plus, and ensures sparing mortar use with the best interlock The centring blades perfectly align the anchor in the anchor sleeve, and allow for use with various threaded rod diameters The barbed hooks secure the anchor sleeve in the drill hole and allow for a trouble-free overhead installation The geometry of the anchor sleeves allows for the bridging of non-bearing layers for a simple and convenient installation Suitable for The system can be used with any of the following injection mortars:FIS V Plus, FIS VW Plus High Speed, FIS VS Plus Low Speed, FIS V, FIS VL, FIS Green or FIS P Plus. FIS P can be used but does not have approvals The system is suitable for pre-positioned installation when combined with injection anchor sleeves and threaded rods FIS A or internal threaded anchors FIS E The anchor sleeve is placed in the drill hole, and filled with injection mortar from the anchor sleeve base Turning in the anchor causes the mortar to be pushed through the anchor sleeve's grating structure, so that it fits the base material perfectly. The load is borne by the interlock Building materials Approved for: Vertically perforated brick Hollow blocks made from lightweight concrete Hollow blocks made from concrete Perforated sand-lime brick Solid sand-lime brick Solid brick Also suitable for: Hollow pumice slabs Slabs made of hollow brick and other perforated brick Solid pumice and other solid building materials Application Anchorings in perforated brick masonry with injection mortars FIS V, FIS VL, FIS P Plus, FIS P, and FIS Green ds: dsc: kts: injection sleeve plastic FIS H 20x130 K kpn: 46703 kpn_dash: kpn_clear: 46703 bkpn: FISCHER 46703 bkpn_clear: FISCHER 46703 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Strainer sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer strainer sleeve sr_no_br_cl_ns: 46703 sr_ns: FISCHER46703
r: 02137050 p: 5.99 pid: 21586 b: FISCHER q: 0 st: lt: 8 ean: 4006209957011 sr: FISCHER 95701 sr_no_br: 95701 sr_no_br_cl: 95701 sr_cl: FISCHER95701 sr_dash: sold: 119.8 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Length 250 mm Material Stainless steel 316 Drilling diameter 12 mm n: FISCHER 95701 anchor rod RG M10 x 250 R stainless steel cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The proven rod anchor for external use with a mortar cartridge or injection mortar. The fischer rod anchor RG M is produced from stainless steel. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in external areas. Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various mortar cartridges or injection mortars Anchor rod with oblique edge and hexagon for simple installation with pre-portioned injection cartridge Stainless steel for outdoor use The wide range of the RG M from M8 to M30 opens up a wide range of applications and therefore offers great flexibility The wide range of approved steel types for RG M allows for use in all corrosion resistance classes and offers the best possible application safety Please refer to the approvals for the resin capsules and mortar used Suitable for Due to its oblique edge, the anchor rod RG M is particularly suitable for use in conjunction with resin capsules The anchor rod RG M is set using a hammer drill and the accompanying setting tool in rotating and hitting motions During setting, the oblique edge of the RG M destroys the capsule, and mixes and activates the mortar Use with injection mortar is also possible. Here, the anchor rod is manually inserted into the drill hole with a light rotating movement until it reaches the base of the hole Building materials In connection with the fischer resin capsules approved or suitable for cracked and non-cracked concrete In connection with several fischer injection mortars approved or suitable for different building materials Application Anchorings with resin capsule RSB and RSB mini Anchorings with resin capsule RM II Anchorings with each of the fischer injection mortars FIS SB, FIS EM, FIS EB II, FIS V, FIS VL, FIS V Zero, FIS P Plus, FIS P, FIS EP and FIS Green ds: dsc: kts: anchor rod RG M10 x 250 R stainless steel kpn: 95701 kpn_dash: kpn_clear: 95701 bkpn: FISCHER 95701 bkpn_clear: FISCHER 95701 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 95701 sr_ns: FISCHER95701
r: 02020187 p: 5.96 pid: 15989 b: FISCHER q: 0 st: lt: 8 ean: 4006209972748 sr: FISCHER 97274 sr_no_br: 97274 sr_no_br_cl: 97274 sr_cl: FISCHER97274 sr_dash: sold: 119.2 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 12 mm Length 75 mm Anchoring depth 75 mm Width across flats 19 mm Effective length 60 mm Drill hole depth 90 mm Drilling diameter 12 mm n: FISCHER 97274 highbond anchor FHB II-A S M12 x 75/60 ev cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete with the least installation effort. The fischer Highbond rod anchor FHB II-A S is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that railings, machines and heavy steel constructions are securely installed within internal areas. Reduces anchorage depth, lowers expense when drilling and installing. This saves costs Through-type installations without additional aids. This saves time Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application Suitable for The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Suitable for: Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions Ideal for: Push-through installation ds: dsc: kts: highbond anchor FHB II-A S M12 x 75/60 ev kpn: 97274 kpn_dash: kpn_clear: 97274 bkpn: FISCHER 97274 bkpn_clear: FISCHER 97274 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97274 sr_ns: FISCHER97274
r: 02779424 p: 2.35 pid: 20734 b: FISCHER q: 0 st: lt: 8 ean: 4048962244823 sr: FISCHER 535854 sr_no_br: 535854 sr_no_br_cl: 535854 sr_cl: FISCHER535854 sr_dash: sold: 117.5 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Overall length 76 mm Safety anchor No Drilling diameter 15 mm n: FISCHER FH II 15/65-M10 channel plate anchor zinc-plated - 535854 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description Economisch systeem, de bout kan tot vijf maal herbruikt worden Geen uitstekende ankerdelen na demontage van het anker. Dit heeft een hogere veiligheid op de bouwplaats en tijdbesparing tot gevolg Gangbare zeskantbout welke ook wordt gebruikt voor andere applicaties, hierdoor hoeft er niet van montagegereedschap te worden gewisseld Grote onderlegring voor een betere krachtenafdracht Suitable for Ankerbout bestaande uit een bout (staalkwaliteit 8. 8) en vervangingsset (onderlegring, nylon ring, kreukelzone, spreidhulsen onderconus) Uitstekend Suitable for tijdelijke bevestiging van betonwanden middels schoren, maar ook voor permanente Application Na demontage blijven de onderconus en spreidhuls achter in het boorgat, deze onderdelen kunnen tezamen met de spreidhuls, nylon ring en onderlegring nabesteld worden Kleinste afmeting tevens Suitable for de bevestiging van F-beugels in kanaalplaatvloeren Building materials Suitable for: Cavity floor slabs C40/50 Application Diagonal props Panels made of concrete ds: dsc: kts: channel plate anchor zinc-plated kpn: FH II 15/65-M10 kpn_dash: FH II 15/65 kpn_clear: FHII1565M10 bkpn: FISCHER FH II 15/65-M10 bkpn_clear: FISCHER FHII1565M10 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 535854 sr_ns: FISCHER535854
r: 83994839 p: 0.57 pid: 5713 b: FISCHER q: 0 st: lt: 1 ean: 8001132419021 sr: FISCHER 41902 sr_no_br: 41902 sr_no_br_cl: 41902 sr_cl: FISCHER41902 sr_dash: sold: 114 p_range: none type: standard act: 1 avo: 1 av: Diameter 16 mm Length 85 mm n: FISCHER 41902 injection sleeve plastic FIS H 16x85 K cn: STRAINER SLEEVE cn2: STRAINER SLEEVE cn_clear: STRAINERSLEEVE d: Product description The injection anchor sleeve for particularly sparing mortar usage in perforated brick masonry. The fischer injection anchor sleeve FIS H K is the system component for the professional, mortar-saving installation of the threaded rod FIS A or internal threaded anchor FIS E in perforated brick masonry. The fischer injection mortars FIS V, FIS VW HIGH SPEED, FIS VS LOW SPEED, FIS VL, FIS Green, FIS P Plus, and FIS P can be used with it. The optimised grating structure reduces the use of injection mortar. When the threaded rod and internal threaded anchor are installed, the mortar is pressed through the grating structure and creates a form fit with the perforated brick. This directs the load into the building material. Setting takes place in a pre-positioned installation. You can use the injection anchor sleeve to bridge non-load-bearing layers. The approvals of the various injection mortars must be observed. Lattice structure of anchor sleeves lowers mortar consumption Anchor sleeve allows for optimum mechanical interlock in perforated brick The centring blades fix anchor rods with various diameters. This lowers complexity and simplifies storage Barbed hook: no falling with overhead installations ETA approval The grating structure of the FIS H K anchor sleeve is adapted for the injection mortars FIS V Plus,FIS V,FIS VL, FIS Green and FIS P Plus, and ensures sparing mortar use with the best interlock The centring blades perfectly align the anchor in the anchor sleeve, and allow for use with various threaded rod diameters The barbed hooks secure the anchor sleeve in the drill hole and allow for a trouble-free overhead installation The geometry of the anchor sleeves allows for the bridging of non-bearing layers for a simple and convenient installation Suitable for The system can be used with any of the following injection mortars:FIS V Plus, FIS VW Plus High Speed, FIS VS Plus Low Speed, FIS V, FIS VL, FIS Green or FIS P Plus. FIS P can be used but does not have approvals The system is suitable for pre-positioned installation when combined with injection anchor sleeves and threaded rods FIS A or internal threaded anchors FIS E The anchor sleeve is placed in the drill hole, and filled with injection mortar from the anchor sleeve base Turning in the anchor causes the mortar to be pushed through the anchor sleeve's grating structure, so that it fits the base material perfectly. The load is borne by the interlock Building materials Approved for: Vertically perforated brick Hollow blocks made from lightweight concrete Hollow blocks made from concrete Perforated sand-lime brick Solid sand-lime brick Solid brick Also suitable for: Hollow pumice slabs Slabs made of hollow brick and other perforated brick Solid pumice and other solid building materials Application Anchorings in perforated brick masonry with injection mortars FIS V, FIS VL, FIS P Plus, FIS P, and FIS Green ds: dsc: kts: injection sleeve plastic FIS H 16x85 K kpn: 41902 kpn_dash: kpn_clear: 41902 bkpn: FISCHER 41902 bkpn_clear: FISCHER 41902 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Strainer sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer strainer sleeve sr_no_br_cl_ns: 41902 sr_ns: FISCHER41902
r: 87051396 p: 2.23 pid: 17141 b: FISCHER q: 0 st: lt: 8 ean: 4048962016772 sr: FISCHER 503137 sr_no_br: 503137 sr_no_br_cl: 503137 sr_cl: FISCHER503137 sr_dash: sold: 111.5 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Overall length 75 mm Safety anchor Yes Drilling diameter 10 mm n: FISCHER FH II 10/25 SK safety anchor with countersunk head electrolytically galvanised - 503137 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with countersunk head in cracked concrete. The fischer high-performance anchor FH II SK with countersunk head is a sleeve anchor made of zinc-plated steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorbs the torque slippage. This means that the fixture is pulled towards the anchoring base. The fischer high-performance anchor FH II SK with countersunk head is ideally suited to fix railings, staircases, and ladders in cracked and non-cracked concrete. With countersunk head for assembly that is flush to the surface The international approvals guarantee maximum safety and maximum performance. Also for applications in earthquake regions (seismic C1 and C2) The ideal combination of screw shank and sleeve enables a high transverse load capacity and fewer fixing points The optimised geometry intelligently reduces the setting energy and thus ensures a force-saving assembly The international approvals guarantee maximum safety and the best performance. The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2) The countersunk finished screw head allows for flush-mounted fixing The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required The optimised geometry intelligently reduces the energy required for assembly The approval regulates the use of hollow drills Suitable for The FH II is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The black plastic ring prevents rotation when tightening the anchor, and acts as a crumple zone to take the torque slippage so that the fixture is pulled onto the anchor base Available head shapes for flexible design solutions:Countersunk head (type SK), hexagon head (type S), bolt version with nut and washer (type B) and cap nut (type H) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Guard rails Staircases Consoles Steel constructions Ladders Cable trays Machines Gates Façades Gratings ds: dsc: kts: safety anchor with countersunk head electrolytically galvanised kpn: FH II 10/25 SK kpn_dash: kpn_clear: FHII1025SK bkpn: FISCHER FH II 10/25 SK bkpn_clear: FISCHER FHII1025SK c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 503137 sr_ns: FISCHER503137
