r: 03312286 p: 398.719 pid: 158660 b: FLUKE q: 5 st: 1 lt: 1 ean: 0095969921138 sr: FLUKE 5134758 sr_no_br: 5134758 sr_no_br_cl: 5134758 sr_cl: FLUKE5134758 sr_dash: sold: 5980.785 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery type AA Low battery message Yes With current clamp Yes Max. current AC/DC 200 A Continuity test Yes Measurement Lo-Z No Measurement of noise No Measurement of electrical capacity No Max. frequency 0,066 kHz Measurement voltage Yes Current measurement Yes Measurement resistance No Measurement frequency Yes n: FLUKE T6-1000PRO/EU electrical tester - 5134758 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Voltage and current on one screen The T6-1000 PRO electrical tester measures voltage up to 1000 V AC and current up to 200 A AC, all through the open fork and without the test lead making contact with open voltage. Connect the black test lead to earth using the alligator clip provided for heavy duty use, slide the wire into the open fork and voltage and current are displayed simultaneously. For wires up to AWG 4/0 (120 mm2), with a load of up to 200 A and 1000 V AC. Even with gloves on. It will transform your work. Key features Simultaneous voltage and current display - save time by viewing voltage and current readings simultaneously when troubleshooting motors, pumps or other equipment. Visual Continuity - When checking the passage, the screen automatically turns green when the beeper is on. Ideal for when there is too much ambient noise to hear the beep, when you wear hearing protection or when it is too dark to read the screen easily. No more guesswork when checking passage, thanks to Visual Continuity. True-RMS - Accurate voltage and current measurements, even when measuring complicated signals. FieldSense technology for measuring AC voltage, current and frequency without making electrical contact with active voltage 1 to 1000 V AC or DC 0.1 to 200 A AC Resistance: 1 Ohm to 100 kOhm Frequency measurement: 45 Hz to 66 Hz via open fork Works with most wires up to AWG 4/0 (17.8 mm/0.7 inch jaw opening) HOLD button temporarily freezes the display for easy viewing Easy-to-read backlit display Compatible with the optional Fluke TPAK magnetic meter hanging clip for convenient operation Standard two-year warranty; extendable to 4 years by registering the product within 45 days of purchase ds: dsc: Scope of delivery T6-1000 PRO electrical tester Attached test leads with removable 4 mm test caps Black AC285 SureGrip crocodile clips H-T6 holster User documentation kts: electrical tester kpn: T6-1000PRO/EU kpn_dash: T6 kpn_clear: T61000PROEU bkpn: FLUKE T6-1000PRO/EU bkpn_clear: FLUKE T61000PROEU c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 5134758 sr_ns: FLUKE5134758
r: 02958390 p: 330.748 pid: 71452 b: FLUKE q: 0 st: lt: 9 ean: 0095969723565 sr: FLUKE 4459439 sr_no_br: 4459439 sr_no_br_cl: 4459439 sr_cl: FLUKE4459439 sr_dash: sold: 5953.464 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE A3001 FC iFlex wireless AC power module - 4459439 cn: CURRENT CLAMP cn2: CURRENT CLAMP cn_clear: CURRENTCLAMP d: Key features: The Fluke a3001 FC wireless iFlex AC current module is a fully functional True-RMS current meter that wirelessly transmits readings to other Fluke Connect-enabled main units, as shown below: Fluke 3000 FC DMM Fluke Ti200/300/400 thermal imager PC via optional pc3000 FC adapter Fluke Connect Mobile App The wireless iFlex current module allows measurements to be made on differently sized conductors or in tight spaces and makes wires more accessible: Measurement up to 2500 A AC Use as a stand-alone meter or as part of the system Log function for recording and storing up to 65,000 measured values Inrush current function Magnetic suspension strap Product description: Viewing. Save. Share. All the facts, right on site. The Fluke A3001 FC wireless AC current module is part of a range of wireless measurement tools that allow you to share data using the Fluke Connect app with ShareLive video call function. Fluke Connect wireless measurement tools ensure that instruments and not your body are near live electrical distributors. It's simple. Connect the A3001 FC current module, or one of the other Fluke Connect remote modules, and read results at a safe distance on the Fluke Connect wireless multimeter or a portable computer. The Fluke Connect measuring instruments can send measurement data to your smartphone, so you can store readings on it and share them with your team on site, anytime, anywhere. Detect intermittent electrical faults without getting stuck Timing is all-important when trying to detect an intermittent problem, and the hard part is that the problem doesn't always occur when you have connected your meter. We've solved that problem with Fluke Connect - leave your remote modules plugged in to log readings and leave the site to tackle other problems. You can then download the data for further analysis. Work safely near electrical distributors with less personal protective equipment Personal protective equipment can save your life, but they are bulky, hot and difficult to work in. With Fluke Connect, there is no need to work in front of live open distribution panels or moving/hazardous machinery. Imagine having access to live readings without being exposed to the live distribution panel. It is simple. Simply de-energise the electrical cabinet, open the distribution panel while wearing personal protective equipment and connect one or more A3001 FC modules. Close the cabinet, turn the power back on and let the Fluke Connect system do its job, while reducing the risk of arc discharge by staying away from dangerous measurement situations. Faster and cheaper 3-phase testing Once your electrical cabinet is de-energised, attach a Fluke Connect current clamp to each phase. Close the cabinet, switch the power back on and read the measured values. What previously took hours in total and required expensive equipment can be done in minutes with an affordable Fluke Connect wireless system. Perform 3-phase measurements in 1/3 the time. Add your laptop and go from logging immediately to analysis and diagnosis. You can solve problems faster by seeing live readings from multiple measurement points on a single screen. The A3001 FC current modules enable the following: Take 3-phase measurements in 1/3 the time of previous methods. Send data to your laptop and move immediately from logging to analysis and diagnosis. Log data over an extended period of time to monitor hourly, shift or week-long changes in circuit load. Using the Fluke Connect wireless USB adapter to collect logged data from remote modules by walking past an operating module and downloading logged data. Perform analyses with your PC and share results using Fluke Cloud storage and the ShareLive video call function. View data or graphs to get input from team members. ds: dsc: Scope of delivery True-RMS flexible current meter iFlex flexible current clamp kts: iFlex wireless AC power module kpn: A3001 FC kpn_dash: kpn_clear: A3001FC bkpn: FLUKE A3001 FC bkpn_clear: FLUKE A3001FC c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Current clamp | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke current clamp sr_no_br_cl_ns: 4459439 sr_ns: FLUKE4459439
r: 03180588 p: 798.352 pid: 71494 b: FLUKE q: 0 st: lt: 12 ean: 0095969916653 sr: FLUKE 5111858 sr_no_br: 5111858 sr_no_br_cl: 5111858 sr_cl: FLUKE5111858 sr_dash: sold: 5588.464 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery type AA Low battery message Yes Automatic shut-off Yes With current clamp Yes Diode test No Max. current AC/DC 2500 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance No Current measurement Yes Measurement voltage Yes Max. electrical capacity 1000 µF Max. frequency 0,5 kHz n: FLUKE 377 FC True-RMS wireless AC/DC current clamp with iFlex - 5111858 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Measure voltage and current with your current clamp Faster and safer testing, all without touching a live wire, with FieldSense technology. Complete 3-phase voltage and current testing in three easy steps Complete set calculating phase-to-ground and phase-to-phase values Displayed on your smartphone and stored in the cloud via Fluke Connect software Phase rotation calculated and displayed on Fluke Connect software No more handwritten notes or complicated arithmetic ds: dsc: Scope of delivery 377 FC True-RMS non-contact current clamp iFlex flexible current clamp (18 inches; 48 cm) TL224 test leads with silicone insulation TP175 TwistGuard test probes AC285 earth clamp (black, one piece) TPAK magnetic suspension kit, with 23 cm (9 inches) suspension strap Carrying case Quick guide kts: True-RMS wireless AC/DC current clamp with iFlex kpn: 377 FC kpn_dash: kpn_clear: 377FC bkpn: FLUKE 377 FC bkpn_clear: FLUKE 377FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 5111858 sr_ns: FLUKE5111858
r: 08106982 p: 2778.209 pid: 72118 b: FLUKE q: 0 st: lt: 8 ean: 0195112044575 sr: FLUKE 5353866 sr_no_br: 5353866 sr_no_br_cl: 5353866 sr_cl: FLUKE5353866 sr_dash: sold: 5556.418 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 2062 Advanced Pro cable locator set - 5353866 cn: CABLE LOCATOR cn2: CABLE LOCATOR cn_clear: CABLELOCATOR d: Product description Quickly and accurately locate live and de-energised wires and cables in walls, ceilings and floors Patented Smart Sensor locates and displays live cables on colour display Locate breaks, interruptions and short circuits and easily find circuit breakers and fuses Safety specification CAT IV 600 V Includes i400 AC Current Clamp for creating a trace signal on the cable when you cannot access exposed conductors Designed for your safety The Fluke 2062 Advanced Pro Cable Locator accurately and safely troubleshoots live and de-energised cables in residential, commercial and industrial environments up to CAT IV 600 V. This CAT rating offers the highest protection available on a cable locator. It is designed to protect you from the most dangerous levels of commutation collapse, peaks up to 8,000 V, that can occur in industrial environments. This is especially important for scenarios you may encounter in environments such as industrial plants, factories and hospitals where critical equipment cannot be taken out of service. Smarter tracking saves time With the patented Smart Sensor, only available on the Fluke 2062, you can trace cables faster and easier. It locates and displays live cables in walls, floors and ceilings on a high-resolution 3.5-inch TFT LCD colour display. Integrated on-screen help screens provide extra ease of use, whether you are a beginner or an expert. The point sensor provides an audible tone when locating wires, and the Smart Sensor helps visualise and locate the direction of live cables. Cable tracing adapted to your needs Whether detecting faults in electrical wiring and equipment in homes, commercial buildings or high-voltage facilities, the Fluke 2062 can easily detect breaks, interruptions and short circuits. Its various modes and functions give you the flexibility to detect a wide range of electrical wiring and circuit problems you may encounter on the job. Receiver with four tracing modes The 2062-R receiver detects signal in wires and cables according to two modes: passive tracing without the transmitter for non-contact voltage detection, and active tracing with the transmitter for all other modes. The receiver's point sensor can trace wires in corners, tight spaces and junction boxes. 'Smart Sensor' mode for detection and visualisation of live cables on the large colour LCD screen 'Tip sensor' mode for more accurate detection of a cable 'Circuit breaker' mode for easy identification of circuit breakers and fuses based on the highest recorded signal detected by the transmitter 'Non-contact voltage detection' mode to trace live wires without using the transmitter Three transmitteri power modes The 2000-T transmitter operates on live and de-energised circuits up to CAT IV 600 V and has high, low and loop modes. These modes change the strength of the signal generated and, depending on the circuit you are detecting, can provide more accurate results. 'High' mode for normal live and de-energised circuits 'Low' mode for accurate searching with a low signal to reduce coupling with nearby wires and metal objects 'Loop' mode for de-energised closed circuits Two transmitter output frequencies The 2000-T automatically detects whether the system is live or de-energised and selects an output frequency of 6 kHz or 33 kHz. Eight receiver sensitivity levels More sensitivity levels mean more flexibility and tracking accuracy. Complete kit The Fluke 2062 advanced Pro cable locator set comes with everything needed to trace cables and circuits. The accessory set includes test leads, test probes, adapters for wall sockets with round and flat pins and alligator clips to connect the transmitter to electrical systems. Connecting the transmitter to a bare conductor with the crocodile clips and test leads provided always gives the most accurate results. However, in situations where a direct connection to a bare conductor is not available, the supplied i400 current clamp can be used with the 'Loop' mode to generate an amplified 6 kHz signal through the insulation. The kit also includes a tape with magnetic hanging clip, batteries and a hard carrying case. ds: dsc: Scope of delivery Fluke 2062R advanced Pro cable locator receiver with Smart Sensor Fluke 2000T advanced cable locator transmitter i400 AC current clamp Fluke 2000ACC test lead accessory kit for 2052/2062 Handy strap with magnetic hanging clip Premium hard carrying case Batteries Quick guide kts: Advanced Pro cable locator set kpn: 2062 kpn_dash: kpn_clear: 2062 bkpn: FLUKE 2062 bkpn_clear: FLUKE 2062 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital detection and inspection instruments / Cable locator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital detection and inspection instruments / Fluke cable locator sr_no_br_cl_ns: 5353866 sr_ns: FLUKE5353866
r: 02957505 p: 679.133 pid: 71331 b: FLUKE q: 0 st: lt: 8 ean: 0095969786676 sr: FLUKE 4637337 sr_no_br: 4637337 sr_no_br_cl: 4637337 sr_cl: FLUKE4637337 sr_dash: sold: 5433.064 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE i17XX-FLEX1500/3PK iFlex current clamp 1500 A AC, 30.5 cm (3 pcs) - 4637337 cn: CURRENT CLAMP cn2: CURRENT CLAMP cn_clear: CURRENTCLAMP d: Product description: The Fluke 17XX 12-inch iFlex flexible current clamps extend the measurement range of the Fluke 17XX Energy or Power Logger to 1500 A AC while offering ultimate flexibility during measurement. The iFlex current clamps connect directly to the Logger and display current measurement values without error-prone scale factors. The 1.80 m (6 ft) long cord allows the Energy Logger to be removed from the measurement point, simplifying reading of the display. ds: dsc: kts: iFlex current clamp 1500 A AC, 30.5 cm (3 pcs) kpn: i17XX-FLEX1500/3PK kpn_dash: i17XX kpn_clear: i17XXFLEX15003PK bkpn: FLUKE i17XX-FLEX1500/3PK bkpn_clear: FLUKE i17XXFLEX15003PK c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Current clamp | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke current clamp sr_no_br_cl_ns: 4637337 sr_ns: FLUKE4637337
r: 02951925 p: 5362.153 pid: 72693 b: FLUKE q: 0 st: lt: 8 ean: 0095969413862 sr: FLUKE 3023328 sr_no_br: 3023328 sr_no_br_cl: 3023328 sr_cl: FLUKE3023328 sr_dash: sold: 5362.153 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 718EX 300G pressure calibrator (from -830 mbar to 20 bar) - 3023328 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 718 series of pressure calibrators (includes 4 models) offers a total pressure calibration solution for transmitters, meters and switches. This compact pressure calibration solution is about two-thirds smaller than comparable instruments and weighs only one kilogram. The unique, easy-to-clean pump is protected against damage and can be cleaned without disassembly, even in the field. Key features: Generates and measures pressure and milliamps for calibrating and maintaining almost all pressure equipment The integrated pump can be easily cleaned if it accidentally comes into contact with liquids, reducing operating and repair costs and enabling maintenance of the pump in the field Error rate calculation for faster pass/fail decisions in the field Highest mA accuracy of 0.015% for greater measurement reliability and wider range of tasks Min/Max/Hold for recording changing measured values Switch test function for faster and more accurate testing of pressure switches New pressure ranges of 1 and 300 psi mean fewer additional instruments needed Ranges of 1, 30, 100 and 300 psi now available ds: dsc: kts: pressure calibrator (from -830 mbar to 20 bar) kpn: 718EX 300G kpn_dash: kpn_clear: 718EX300G bkpn: FLUKE 718EX 300G bkpn_clear: FLUKE 718EX300G c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 3023328 sr_ns: FLUKE3023328
r: 02841297 p: 1044.533 pid: 73141 b: FLUKE q: 0 st: lt: 10 ean: 0095969586696 sr: FLUKE 3947812 sr_no_br: 3947812 sr_no_br_cl: 3947812 sr_cl: FLUKE3947812 sr_dash: sold: 5222.665 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery type AA Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z Yes Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 100000 µF Max. frequency 1000 kHz Max. resistance 500 MOhm n: FLUKE 289/FVF combination kit multimeter 289 + View Forms software - 3947812 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: Compatible with Fluke Connect Mobile App Achieve maximum productivity with the combination kit of the Fluke 289 and FlukeView Forms software. The Fluke 289 with its built-in data logger and TrendCapture feature lets you detect hard-to-find, intermittent faults by monitoring certain equipment functions while performing other work in the meantime. With the FlukeView Forms software, you can overlay data from six different meters or time periods to demonstrate cause-and-effect relationships or for condition monitoring purposes. Turn your data into clear graphs and tables, for professional reporting or for analysing individual readings or series of readings. The 289 is compatible with the Fluke ir3000 FC infrared connector, so you can share live measurements on your iOS or Android device using the Fluke Connect Mobile App. The 289/FVF combination kit offers you a practical and affordable option of performing predictive maintenance. Key features: Compatible with Fluke Connect Mobile App and all Fluke FC-enabled measuring instruments with optional ir3000 FC infrared connector (sold separately). Instantly show your team what you see, with the ShareLive video call feature (Fluke Connect Mobile App and ir3000 FC wireless connector required). TrendCapture graphically displays a logged data session to quickly determine if anomalies have occurred. Zooming in on trends offers unprecedented possibilities for viewing and analysing TrendCapture data; up to 14 times zoom in. The selectable AC filter (smoothing mode) allows a more stable reading to be displayed when the input signal changes rapidly or contains a lot of noise. Adjustable recording thresholds and Auto Hold by defining a percentage change for measurements at the start of a new event. Large dot matrix display, 1/4 VGA, up to 50,000 counts and with white backlight. Log function with extended memory for independent monitoring of signals for a defined period of time. With the integrated TrendCapture function, you can view a graphical display of recorded measurement values without a PC. Store up to as many as 15,000 recorded events. Multiple log sessions can be saved before downloading to a PC. Two connections for 50-ohm range with 1 milliohm resolution and 10 mA source current. Useful for measuring the resistance of motor windings and comparing differences in them or for measuring contact resistance. Low-pass filter for accurate simultaneous voltage and frequency measurements in frequency-controlled drives and other devices that cause electrical disturbances. LoZ Volts. Low input impedance, prevents erroneous readings due to 'phantom voltage'. Also recommended for testing for presence or absence of (mains) voltage. Internal auxiliary screens for measurement functions. Uncertain about a function? Go to that function and press the 'i' key. Real-time clock for automatic timing of stored measurement values. Relative mode for eliminating test lead resistance when measuring low-resistance or capacitance values. True-RMS AC voltage and current for accurate measurements on non-linear signals. Measures up to 10 A (20 A for 30 seconds). Capacitance range 100 mF. Peak recording for recording transients at speeds up to 250 ?s. Premium measuring leads and crocodile clips included. Banana plugs included. Optional magnetic hanging clip for easy attachment and reading while leaving your hands free for other tasks. FlukeView Forms software lets you document, store and analyse individual readings or a series of readings, then turn them into professional-looking documents. Limited lifetime warranty ds: dsc: Scope of delivery Fluke 289 multimeter FlukeView Forms software with cable AC175 alligator clips 80BK-A thermocouple probe TL71 silicone test lead kit TPAK magnetic suspension kit C280 carrying case Set of banana plugs Information pack kts: combination kit multimeter 289 + View Forms software kpn: 289/FVF kpn_dash: kpn_clear: 289FVF bkpn: FLUKE 289/FVF bkpn_clear: FLUKE 289FVF c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3947812 sr_ns: FLUKE3947812
r: 02953990 p: 467.442 pid: 71307 b: FLUKE q: 0 st: lt: 8 ean: 0095969798341 sr: FLUKE 4695814 sr_no_br: 4695814 sr_no_br_cl: 4695814 sr_cl: FLUKE4695814 sr_dash: sold: 5141.862 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature Yes Digital Yes Battery type AA Low battery message Yes Automatic shut-off Yes With current clamp Yes Diode test No Max. current AC/DC 600 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency No Measurement resistance No Current measurement Yes Measurement voltage Yes Max. electrical capacity 1000 µF n: FLUKE 902 FC True-RMS wireless HVAC current clamp - 4695814 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: The Fluke 902 FC True-RMS HVAC Current Clamp enables HVAC technicians to create reports and collaborate with colleagues in the workplace. A Fluke Connect-enabled meter, the Fluke 902 FC True-RMS HVAC current clamp increases the productivity of HVAC technicians in the field. The rugged meter with dual safety specification - CAT III, 600 /CAT IV, 300 V - performs the essential measurements on HVAC systems ? microampere for testing pilot light sensors, resistance up to 60 kilo-ohm, AC current, AC/DC voltage, capacitance and contact temperature ? so there is no need to carry several meters around. The small case is easy to hold and the jaw fits perfectly in tight work spaces. As part of Fluke Connect ? the industry's largest system of software and (over 40) wireless test and measurement instruments ? the 902 FC can send measurement results to a smartphone or tablet for later, detailed analysis. These measurement results can be uploaded to the cloud. Technicians can combine measurement data from multiple Fluke Connect measurement tools to create reports on site and share them by email, and then collaborate with colleagues in real-time using the ShareLive video call function or emails, increasing productivity on site. This current clamp reduces the need for technicians to wear personal protective equipment when working on electrical distributors with high voltage/current values. Simply switch off the electrical distributor, check through standard safety procedures that the distributor is de-energised, apply the clamp and synchronise the clamp to a smartphone using the Fluke Connect app, close the distributor, re-energise it and take measurements from a safe distance. Key features: 200 µA DC current measurements for measuring through flame sensors Extended resistance range for measuring through thermistors up to 60 k? Record flue gas temperature Measure starting and operating capacitors of motors Measure the performance of frequency-controlled drives Fluke Connect Fluke Connect connects your meter to your phone via Bluetooth, so you can do more faster and more safely Read read readings from a safe distance on your phone while wearing less personal protective equipment and your meter bears all the risk Find faults better by instantly recording trends live on your phone's screen and monitoring trends Compile and send reports, right from location. Is the report not enough? Fluke Connect has a ShareLive video call feature, which streams live video and measurements in the same screen Don't stop recording results, save them to your phone directly from your meter at the touch of a button Measurement functions 600 A AC current measurement 600 V AC and DC voltage measurement Temperature measurement from -10 °C to 400 °C (14 °F to 752 °F) 1000 µF capacitance measurement DC current measurement up to 200 µA True-RMS voltage and current for accurate measurement of non-linear signals Resistance measurement up to 60 k? Minimum and maximum values for automatic recording of fluctuations Further features Safety specification CAT III 600V, CAT IV 300V The TPAK magnetic suspension strap (optional) allows you to easily hang the meter while using the probes Ergonomic design allows the clamp to sit comfortably in the hand and be used when wearing personal protective equipment Large and easy-to-read backlit display Three-year warranty ds: dsc: Scope of delivery TL75 measuring leads (1 pair) 80BK integrated DMM thermocouple (1) AA alkaline batteries (2) Carrying case User manual kts: True-RMS wireless HVAC current clamp kpn: 902 FC kpn_dash: kpn_clear: 902FC bkpn: FLUKE 902 FC bkpn_clear: FLUKE 902FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 4695814 sr_ns: FLUKE4695814
r: 02958165 p: 602.314 pid: 70189 b: FLUKE q: 0 st: lt: 10 ean: 0095969242721 sr: FLUKE 2098723 sr_no_br: 2098723 sr_no_br_cl: 2098723 sr_cl: FLUKE2098723 sr_dash: sold: 4818.512 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 80PK-27 SureGrip industrial surface temperature measuring probe - 2098723 cn: THERMOCOUPLE cn2: THERMOCOUPLE cn_clear: THERMOCOUPLE d: Product description: The Fluke 80PK-27 SureGrip industrial surface temperature measuring probe is designed for compatibility with any temperature measuring instrument suitable for Type K thermocouples, has a mini connector for thermocouples and reference junction compensation for low temperatures. The innovative SureGrip design makes it easier to hold the probe and concentrate on the measurement. Ideal for surfaces in harsh conditions. Key features Durable ribbon sensor Measuring range: -127 to 600 °C One-year warranty ds: dsc: kts: SureGrip industrial surface temperature measuring probe kpn: 80PK-27 kpn_dash: 80PK kpn_clear: 80PK27 bkpn: FLUKE 80PK-27 bkpn_clear: FLUKE 80PK27 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Thermocouple | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke thermocouple sr_no_br_cl_ns: 2098723 sr_ns: FLUKE2098723
r: 02958452 p: 1171.628 pid: 72248 b: FLUKE q: 0 st: lt: 6 ean: 0095969062565 sr: FLUKE 665091 sr_no_br: 665091 sr_no_br_cl: 665091 sr_cl: FLUKE665091 sr_dash: sold: 4686.512 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 705 loop calibrator - 665091 cn: LOOP CALIBRATOR cn2: LOOP CALIBRATOR cn_clear: LOOPCALIBRATOR d: Key features: Powerful loop calibrator offering a highly cost-effective, integrated solution for calibration, repair and maintenance of milliamp loops. Provides simultaneous mA and % readout for fast, easy interpretation of readings. Delivers mA accuracy of 0.02%. Features push button with 25% steps for quick, easy linearity checks Other features: mA sourcing, simulation and measurement 0.02% accuracy and 0.001 mA resolution Simultaneous display of mA and % Selectable step or ramp outputs 24 V loop power supply with mA measurement 0-28 VDC measurement to monitor loop voltage Easy battery replacement without opening the housing Includes "span check" for quick confirmation of zero and span. Provides selectable slow ramp, fast ramp and step to provide smooth outputs for valve rotation and loop functional testing. Includes a 24-volt internal loop power supply, allowing you to power and read a transmitter simultaneously without a digital multimeter. Operates on a single 9 V battery that can be easily replaced without breaking the calibration seal. Offers 0 - 20 mA or 4 - 20 mA standard start-up modes. Comes with a protective yellow holster with storage for test leads and a three-year warranty. ds: dsc: Scope of delivery Fluke 705 Loop calibrator AC70A alligator clips C10 protective yellow holster with Flex-Stand Instruction sheet TL75 test lead kit designed to safety standards NIST traceable calibration report and data kts: loop calibrator kpn: 705 kpn_dash: kpn_clear: 705 bkpn: FLUKE 705 bkpn_clear: FLUKE 705 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Loop calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke loop calibrator sr_no_br_cl_ns: 665091 sr_ns: FLUKE665091
r: 08107174 p: 2275.991 pid: 166212 b: FLUKE q: 0 st: lt: 8 ean: 0195112050354 sr: FLUKE 5363614 sr_no_br: 5363614 sr_no_br_cl: 5363614 sr_cl: FLUKE5363614 sr_dash: sold: 4551.982 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE FEV300/KIT SCH test adapter set for electric car charging station incl. 1664 fC installation tester - 5363614 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description Safely tests PE conductor for possible presence of hazardous voltage with respect to earth Simulate different current capacities of charging cables Simulate charging status of vehicles Simulate PE fault (earth fault) Includes Fluke 1664 FC for performing installation tests and type 2 connector The FEV300 &1664 SCH kit provides an EV charging station test adapter along with a multi-function installation tester. The adapter simulates the presence of an electric vehicle, allowing the user to perform safety and functionality tests in combination with suitable test instruments, such as a multi-function tester, a digital multimeter or an oscilloscope. Use the FEV300 for station installations and to check that the station is operating correctly after installation, during periodic maintenance or troubleshooting if the station does not provide the appropriate charge. ds: dsc: Scope of delivery FEV300/BASIC test adapter 1664 FC multifunctional installation tester FEV300-CON-TY2 Type 2 plug Carrying case kts: test adapter set for electric car charging station incl. 1664 fC installation tester kpn: FEV300/KIT SCH kpn_dash: kpn_clear: FEV300KITSCH bkpn: FLUKE FEV300/KIT SCH bkpn_clear: FLUKE FEV300KITSCH c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 5363614 sr_ns: FLUKE5363614
r: 02958310 p: 1135.442 pid: 71443 b: FLUKE q: 0 st: lt: 8 ean: 0095969586672 sr: FLUKE 3947796 sr_no_br: 3947796 sr_no_br_cl: 3947796 sr_cl: FLUKE3947796 sr_dash: sold: 4541.768 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery type AA Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 100000 µF Max. frequency 1000 kHz Max. resistance 500 MOhm n: FLUKE 287/FVF combination kit 287 multimeter + View Forms software - 3947796 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: Compatible with Fluke Connect Mobile App Achieve maximum productivity with the combination kit of the Fluke 287 and FlukeView Forms software. Designed for today's professionals in R&D, maintenance, manufacturing and design of electronic circuits or systems. With its built-in data logger and TrendCapture function (the graphical display on the meter's screen), the 287 lets you detect hard-to-find intermittent faults or monitor equipment operation using its other features. With FlukeView Forms, you can document, store and analyse individual readings or series of readings, and overlay logged data to demonstrate cause-and-effect relationships, or convert your data into clear graphs and tables for professional reporting. The 287 is compatible with the new Fluke ir3000 FC infrared connector, so you can share live measurements on your iOS or Android device using the Fluke Connect Mobile App. The 287/FVF combination kit gives you a practical and affordable solution for documenting circuit design performance. Key features: NEW ? Now compatible with Fluke Connect Mobile App and all Fluke FC-enabled measuring instruments with optional ir3000 FC infrared connector (sold separately). NEW ? Instantly show your team what you see, with the ShareLive video call feature (Fluke Connect Mobile App and ir3000 FC wireless connector required). TrendCapture quickly graphically displays a logged data session to quickly determine if anomalies have occurred. Zooming in on trends offers unprecedented possibilities for viewing and analysing TrendCapture data; up to 14 times zoom in. The selectable AC filter (smoothing mode) allows a more stable reading to be displayed when the input signal changes rapidly or contains a lot of noise. Adjustable recording thresholds and Auto Hold by defining a percentage change for measurements at the start of a new event. Large 1/4 VGA display up to 50,000 counts, with white backlight. Multiple sets of measurement information can be displayed simultaneously. Log function with extended memory for independent monitoring of signals for a defined period of time. With the integrated TrendCapture function, you can view a graphical display of captured measurement values without a PC. Store up to as many as 15,000 recorded events. Further features Internal help screens for measurement functions. You can store and name measured values on site and recall them later. Multilingual interface. Multiple logging sessions possible without downloading. DC base accuracy of 0.025%. AC voltage bandwidth 100 kHz. Real-time clock for automatic time stamping of stored measured values. True-RMS AC voltage and current for accurate measurements for complex signals or non-linear loads. AC bandwidth specified up to 100 kHz. Measures up to 10 A (20 A for 30 seconds). Capacitance range 100 mF. Temperature function. Relative mode for eliminating test lead resistance when measuring low-resistance or capacitance values. Peak recording for recording transients at rates up to 250 ?s. Premium measurement leads and crocodile clips included. Banana plugs included. With the FlukeView Forms software, you can document, store and analyse individual measured values or a series of measured values, then turn them into professional-looking documents. With the optional magnetic hanging clip, you can hang the meter so you can easily view it while keeping your hands free for work. ds: dsc: Scope of delivery Fluke-287 True-RMS electronic multimeter with logging function and TrendCapture FlukeView Forms software and cable 80BK-A thermocouple probe CAT III 1000 V 10 A modular test leads (red and black) CAT II 1000 V 10 A modular test probes (red and black) and caps CAT III 1000 V 10 A crocodile clips (red and black) C280 carrying case to protect the instrument and store accessories Set of banana plugs TPAK magnet pendant for hands-free use Requires Fluke ir3000 FC infrared connector for Fluke Connect communication (not included in this kit) kts: combination kit 287 multimeter + View Forms software kpn: 287/FVF kpn_dash: kpn_clear: 287FVF bkpn: FLUKE 287/FVF bkpn_clear: FLUKE 287FVF c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3947796 sr_ns: FLUKE3947796
r: 02957841 p: 291.9 pid: 72891 b: FLUKE q: 0 st: lt: 18 ean: 0095969589932 sr: FLUKE 3971252 sr_no_br: 3971252 sr_no_br_cl: 3971252 sr_cl: FLUKE3971252 sr_dash: sold: 4378.5 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE TLK282-1 SureGrip DeLuxe Automotive test lead kit - 3971252 cn: TEST LEAD SET cn2: TEST LEAD SET cn_clear: TESTLEADSET d: ds: dsc: Scope of delivery TP81 insulation piercing probe set TP40 automotive back probes (five pieces) TL224 SuregripTM silicone probe set TP238 SureGripSlim Slim Reach probes AC220 SuregripTM crocodile clip set AC285 SuregripTM crocodile clamp set with large jaw opening AC280 SuregripTM hook clamp set Carrying bag kts: SureGrip DeLuxe Automotive test lead kit kpn: TLK282-1 kpn_dash: TLK282 kpn_clear: TLK2821 bkpn: FLUKE TLK282-1 bkpn_clear: FLUKE TLK2821 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Test lead set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke test lead set sr_no_br_cl_ns: 3971252 sr_ns: FLUKE3971252
r: 02021244 p: 1343.476 pid: 95025 b: FLUKE q: 0 st: lt: 15 ean: 0095969107150 sr: FLUKE 1617262 sr_no_br: 1617262 sr_no_br_cl: 1617262 sr_cl: FLUKE1617262 sr_dash: sold: 4030.428 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 707 Loop calibrator with Quick Click button - 1617262 cn: LOOP CALIBRATOR cn2: LOOP CALIBRATOR cn_clear: LOOPCALIBRATOR d: Product description: The fastest, one-handed instrument for loop checks. The Fluke 707 loop calibrator is a high-quality solution for calibration, repair and maintenance of current loops. The new ?Quick Click' button makes the instrument even faster and easier to use. This loop calibrator offers: One-handed user interface with ?Quick Click' dial Generates, simulates and measures mA 0.015% accuracy and 0.001 mA resolution Simultaneous display of mA and % of range Adjustable rise and step functions 24V loop power supply with mA measurements, including 250? HART resistor 0 ? 28 V measurements for loop voltage monitoring Battery can be easily replaced without opening the housing Compact housing with removable protective holster Three-year warranty ds: dsc: Scope of delivery AC70A crocodile clips C10 protective yellow holster with FlexStand Instruction sheet TL 75 fused test lead kit kts: Loop calibrator with Quick Click button kpn: 707 kpn_dash: kpn_clear: 707 bkpn: FLUKE 707 bkpn_clear: FLUKE 707 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Loop calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke loop calibrator sr_no_br_cl_ns: 1617262 sr_ns: FLUKE1617262
r: 02951461 p: 4027.277 pid: 71107 b: FLUKE q: 0 st: lt: 39 ean: 0095969815123 sr: FLUKE 4756054 sr_no_br: 4756054 sr_no_br_cl: 4756054 sr_cl: FLUKE4756054 sr_dash: sold: 4027.277 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 125B/EU/S industrial scopemeter 40MHZ (incl. SCC kit) - 4756054 cn: OSCILLOSCOPE cn2: OSCILLOSCOPE cn_clear: OSCILLOSCOPE d: Product description: Fluke 120B industrial ScopeMeter series handheld oscilloscopes Simpler testing, more insight and faster troubleshooting of electromechanical equipment The compact ScopeMeter Series 120B is the rugged oscilloscope solution for troubleshooting and maintenance of industrial electrical and electro-mechanical equipment. It is a truly integrated tester, with oscilloscope, multimeter and high-speed recorder in one easy-to-use instrument. The ScopeMeter Series 120B can also be integrated wirelessly with the Fluke Connect Mobile App and with the FlukeView software for ScopeMeter, to enable greater collaboration, data analysis and archiving of critical test data. Key features The 120B series of ScopeMeter industrial test tools offer innovative features designed to help technicians find faults faster and get the information they need to keep their systems operational. Display waveforms with Connect-and-View technology for triggering and setting, and automatically view related numeric readings with Fluke IntellaSet technology, all without making manual adjustments. Recorder Event Detect capabilities record and log hard-to-find intermittent events for easy viewing and analysis.[S][0] Digital two-channel oscilloscope and multimeter 40 MHz or 20 MHz oscilloscope bandwidth Two digital true-RMS multimeters with 5,000 counts Connect-and-View triggering for easy hands-free operation IntellaSet technology automatically and intelligently adjusts the numerical readout based on the measured signal Dual-channel recorder for waveform and measured values to establish a trend of data over long periods of time Recorder Event Detect records hard-to-find intermittent signals on repeating waveforms up to 4 kHz Shielded test leads for oscilloscope, resistance and continuity measurements Perform resistance measurements, call-through and diode tests and capacitance measurements Power measurements (W, VA, VAR, PF, DPF, Hz) Harmonics in voltage, current and power Check with BusHealth the physical layer of industrial networks against defined reference levels Store or recall instrument data and settings Save instrument settings defined by a test set for routine maintenance or as most commonly used test procedures. External optically isolated USB interface to send, archive and analyse scope or measurement data Optional WiFi adapter connectable to internal USB port to wirelessly send information to PC, laptop or Fluke Connect Mobile App* FlukeView ScopeMeter software for Windows Rugged design to withstand vibration of 3g and shock of 30g and with protection class IP51 according to EN/IEC60529 Industry's highest safety specification: meets safety specification for CAT IV 600 V Rechargeable Li-ion battery, seven hours of battery power (with a four-hour charge time) ds: dsc: Scope of delivery Fluke 125B handheld oscilloscope Shielded test leads with black earth leads Measure lead black (for grounding) Hook terminals (red, blue) Adapter from banana plug to BNC (black, 2x) 10:1 voltage measuring probe i400s AC current clamp Angled USB adapter WiFi USB adapter* Switching power supply, adapter/battery charger Rechargeable Li-ion battery pack Carrying case Magnetic hanging clip FlukeView ScopeMeter software for Windows Screen saver kts: industrial scopemeter 40MHZ (incl. SCC kit) kpn: 125B/EU/S kpn_dash: kpn_clear: 125BEUS bkpn: FLUKE 125B/EU/S bkpn_clear: FLUKE 125BEUS c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Oscilloscope | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke oscilloscope sr_no_br_cl_ns: 4756054 sr_ns: FLUKE4756054
r: 02957547 p: 3754.343 pid: 71341 b: FLUKE q: 0 st: lt: 8 ean: 0095969801942 sr: FLUKE 4706548 sr_no_br: 4706548 sr_no_br_cl: 4706548 sr_cl: FLUKE4706548 sr_dash: sold: 3754.343 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1732/EUS three-phase energy logger with current probes - 4706548 cn: ENERGY COST METER cn2: ENERGY COST METER cn_clear: ENERGYCOSTMETER d: Product description: The new Fluke 1732 and 1734 three-phase electrical Energy Loggers introduce a new easy way to find the sources of energy waste. Discover where and when energy is consumed within your installation, from the service input to individual circuits. Remotely view and share data with your team via the Fluke Connect app, allowing you to maintain safer working distances and make important decisions in real-time. This reduces the need for protective equipment, site visits and checks. Profiling energy consumption within your plant helps you identify energy saving opportunities and provides you with the data needed to take action. With the new Energy Analyze software package, you can compare multiple data points over a long period of time to get a complete picture of energy consumption. The first step towards reducing energy bills. Key features: Key measurement functions: Automatically measure and record voltage, current, power, power factor, energy and associated values Compatible with Fluke Connect: View data locally on the instrument, via the Fluke Connect mobile app and desktop software or via your building's Wi-Fi network Convenient instrument connection: The instrument is powered directly from the measured circuit Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III approved for service input and downstream circuits Measures all three phases: 3 flexible current clamps included Comprehensive log function: more than 20 individual log sessions can be stored on the instruments. All measured values are even recorded automatically so you never lose measurement trends. They can even be accessed during recording sessions and before downloading for real-time analysis Optimised user interface: quick, graphical settings for which additional information is available allow you to capture the right data every time, and the intelligent monitoring function ensures that the right connections have been made, reducing user uncertainty Bright colour touch screen: Useful analysis and checking of data can be done in the field, with full graphic display Optimised user interface: Always capture the right data with fast, guided graphical installation, and eliminate uncertainty about connections with the intelligent monitoring function Full on-site installation via front panel or Fluke Connect: No need to return to the workshop to download and install or to take a computer to the electrical distributor Fully integrated logging function: Connect other Fluke Connect tools to the Fluke 1734 to log two other measurement parameters at the same time. Choose from almost any parameter on a wireless digital multimeter or module with Fluke Connect* Application software Energy Analyze Plus: Download and analyse every detail of energy consumption using our automatic reports ds: dsc: Scope of delivery 1732 energy logger Power supply Voltage test cables Crocodile clips (4x) 1500A flexible current clamp of 30.5 cm (3x) Carrying case Energy Analyze Plus software Cables Colour coding set Documentation on USB memory kts: three-phase energy logger with current probes kpn: 1732/EUS kpn_dash: kpn_clear: 1732EUS bkpn: FLUKE 1732/EUS bkpn_clear: FLUKE 1732EUS c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Energy cost meter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke energy cost meter sr_no_br_cl_ns: 4706548 sr_ns: FLUKE4706548
r: 02951279 p: 208.487 pid: 72582 b: FLUKE q: 0 st: lt: 6 ean: 0095969840095 sr: FLUKE 4856105 sr_no_br: 4856105 sr_no_br_cl: 4856105 sr_cl: FLUKE4856105 sr_dash: sold: 3752.766 p_range: none type: standard act: 1 avo: 1 av: Min. temperature -30 °C Max. temperature 600 °C Optical ratio 20:1 Power supply 1 x AA Accuracy ± 1 °C n: FLUKE 64 MAX laser dot infrared thermometer - 4856105 cn: TEMPERATURE GUN cn2: TEMPERATURE GUN cn_clear: TEMPERATUREGUN d: Product description: The Fluke 64 MAX thermometer has the precision you need to do your job accurately doesn't exceed your budget. This lightweight, compact infrared thermometer is designed and tested to withstand a 3-metre drop. You can trust this thermometer to work when you need it to, even in the harshest conditions and when you can't be on site yourself. Key features Optical resolution: 20:1 Precise laser technology for more accurate and reproducible measurements Temperature accuracy to ± 1 ? or ± 1% of the reading, whichever is greater, with a 20:1 distance to measurement surface ratio Torch and large, easy-to-read backlit LCD display that is easy to read even in dark environments IP54 protection class for extra protection against airborne contaminants Let your gauge work where you can't - set the time and desired interval between measurements and Auto Capture records spot temperatures unattended Log 99 data points 30 hours of battery life, so your gauge works for as long as you need it to Displays minimum, maximum or average temperature or the difference between two readings Alarms Hi and Lo for too high and too low values indicate when readings fall outside set limits Small and lightweight design; fits easily in your toolbox Powered by one (1) AA alkaline battery ds: dsc: kts: laser dot infrared thermometer kpn: 64 MAX kpn_dash: kpn_clear: 64MAX bkpn: FLUKE 64 MAX bkpn_clear: FLUKE 64MAX c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Temperature gun | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke temperature gun sr_no_br_cl_ns: 4856105 sr_ns: FLUKE4856105
r: 02958466 p: 1732.461 pid: 71456 b: FLUKE q: 0 st: lt: 15 ean: 0095969686402 sr: FLUKE 4387857 sr_no_br: 4387857 sr_no_br_cl: 4387857 sr_cl: FLUKE4387857 sr_dash: sold: 3464.922 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 712B/EN RTD temperature calibrator - 4387857 cn: TEMPERATURE CALIBRATOR cn2: TEMPERATURE CALIBRATOR cn_clear: TEMPERATURECALIBRATOR d: Product description: For the temperature calibration professional who wants a highly accurate, easy-to-use, single-function RTD temperature calibrator, the Fluke 712B is the ideal test instrument. Key features The 712B RTD calibrator can measure and simulate the resistance of (13) different types of RTD?s. Measure signals from 4 to 20 mA and generate a temperature signal at the same time Integrally designed suspension system included with each instrument Configurable 0% and 100% source settings for quick linearity checks in 25% increments Linear rise function and automatic rise function in 25% increments based on 0% and 100% settings Two inputs and backlit display for easy interpretation of measured values Switch-off settings are remembered at switch-on for quick restart of tests 1-year and 2-year specifications plus traceable calibration certificate ds: dsc: Scope of delivery Fluke 712B temperature calibrator Magnetic suspension system Batteries Manual Traceable calibration certificate Measurement leads kts: RTD temperature calibrator kpn: 712B/EN kpn_dash: kpn_clear: 712BEN bkpn: FLUKE 712B/EN bkpn_clear: FLUKE 712BEN c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Temperature calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke temperature calibrator sr_no_br_cl_ns: 4387857 sr_ns: FLUKE4387857
