- Large diameter: 63 mm
- Shank size: MK3
Phantom HSS-E countersink bits to DIN 334 and DIN 335
A Phantom countersink cuts a conical recess or chamfer at the edge of a drilled hole, for countersunk screws and to remove burrs. These countersinks are made of HSS-E and range from a few millimetres to large sizes for heavy work.
Choose the angle first. 90° to DIN 335 is the standard for countersunk screws, and there are also countersinks at 60° to DIN 334 and at 120°. Then look at the cutting edges and the shape: with three cutting edges the tool runs smoothly, while with one cutting edge or an oblique hole in the head the chip is cleared through the tool and the countersink stays clean. The HP2 UNI Vari versions to DIN 335-C come uncoated and with AlTiN-X coating, some with a triangular shank.
For large diameters on a pillar drill or lathe there are countersinks with a Morse taper, MK 1, MK 2 or MK 3, for example 63 mm on MK 3. A TiN coating is an option on part of the range. Drill the hole itself to the right size first with the HSS-E and HM-tip twist drills from Phantom, then let the countersink finish the edge.
- Large diameter: 10 mm
- Shank size: 6 mm
- Large diameter: 50 mm
- Shank size: MK2
- Large diameter: 16,5 mm
- Countersink angle: 90 °
- Number of cutting edges: 3
PHANTOM 425481240 HP2 UNI HSS-E Vari countersink bit DIN 335-C 90°' 3 cutting edges' AlTiN-X 12'4 mm
- Large diameter: 12,4 mm
- Countersink angle: 90 °
- Number of cutting edges: 3
- Large diameter: 20 mm
- Shank size: 10 mm
- Large diameter: 25 mm
- Shank size: 12 mm
- Large diameter: 15 mm
- Shank size: 8 mm
- Large diameter: 30 mm
- Shank size: 12 mm
- Large diameter: 10 mm
- Shank size: 6 mm
- Large diameter: 6,3 mm
- Countersink angle: 90 °
- Number of cutting edges: 3
PHANTOM 425481650 HP2 UNI HSS-E Vari countersink bit DIN 335-C 90°' 3 cutting edges' AlTiN-X 16'5 mm
- Large diameter: 16,5 mm
- Countersink angle: 90 °
- Number of cutting edges: 3
- Large diameter: 25 mm
- Countersink angle: 60 °
- Number of cutting edges: 3
- Large diameter: 10 mm
- Shank size: 6 mm
- Large diameter: 25 mm
- Shank size: MK1
PHANTOM 425482050 HP2 UNI HSS-E Vari countersink bit DIN 335-C 90°' 3 cutting edges' AlTiN-X 20'5 mm
- Large diameter: 20,5 mm
- Countersink angle: 90 °
- Number of cutting edges: 3
- Large diameter: 3,8 mm
- Countersink angle: 90 °
- Number of cutting edges: 3
- Large diameter: 15 mm
- Shank size: 8 mm
- Large diameter: 10,4 mm
- Countersink angle: 90 °
- Number of cutting edges: 3
- Large diameter: 6 mm
- Shank size: 6 mm