r: 03030027 p: 6.704 pid: 88044 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 25A1S26I sr_no_br: 25A1S26I sr_no_br_cl: 25A1S26I sr_cl: RENOLD25A1S26I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 1/4 inch; 6,35 mm Length (pin) 7,9 mm Product line Renold Blue Weight (kg/m) 0,12 kg/m Thickness (outer plate) 0,76 mm Type (ISO/ANSI) 25-1 Height 1,2 Inside width 3,1 mm Breaking strength 3500 N Diameter (pin) 2,3 mm Thickness (inner plate) 0,76 mm Plate height 5,9 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD BLUE 25-1 No. 26 closing link simplex 1/4" - 25A1S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link simplex 1/4" kpn: BLUE 25-1 No. 26 kpn_dash: BLUE 25 kpn_clear: BLUE251No26 bkpn: RENOLD BLUE 25-1 No. 26 bkpn_clear: RENOLD BLUE251No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 25A1S26I sr_ns: RENOLD25A1S26I
r: 02096747 p: 6.675 pid: 87773 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 12B1S4I sr_no_br: 12B1S4I sr_no_br_cl: 12B1S4I sr_cl: RENOLD12B1S4I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Diameter (pin) 5,72 mm Product line Renold Blue Number of the connecting link 4 Weight (kg/m) 1,22 kg/m Length (pin) 21,9 mm Thickness (outer plate) 1,81 mm Inside width 11,68 mm Thickness (inner plate) 1,81 mm Height 2,6 Type (ISO/ANSI) 12B-1 Version (link) Simplex Breaking strength 28900 N Plate height 16 mm Diameter (roller) 12,07 mm n: RENOLD 12B1S4I blue 12b-1 - simplex 3/4 inch - inner link cn: INNER LINK cn2: INNER LINK cn_clear: INNERLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: blue 12b-1 - simplex 3/4 inch - inner link kpn: 12B1S4I kpn_dash: kpn_clear: 12B1S4I bkpn: RENOLD 12B1S4I bkpn_clear: RENOLD 12B1S4I c_path: Home / Drive technology / Chains and sprockets / Chains / Inner link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold inner link sr_no_br_cl_ns: 12B1S4I sr_ns: RENOLD12B1S4I
r: 02096748 p: 6.675 pid: 87994 b: RENOLD q: 0 st: lt: 15 ean: 0673766002641 sr: RENOLD 12B1S107I sr_no_br: 12B1S107I sr_no_br_cl: 12B1S107I sr_cl: RENOLD12B1S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch Thickness (outer plate) 1,81 mm Weight (kg/m) 1,22 kg/m Height 2,6 Breaking strength 28900 N Length (pin) 21,9 mm Inside width 11,68 mm Diameter (pin) 5,72 mm Thickness (inner plate) 1,81 mm Plate height 16 mm Product line Renold Blue Type (ISO/ANSI) 12B-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Blue 12b-1 latch link simplex 3/4 inch - 12B1S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: latch link simplex 3/4 inch kpn: Blue 12b-1 kpn_dash: Blue 12b kpn_clear: Blue12b1 bkpn: RENOLD Blue 12b-1 bkpn_clear: RENOLD Blue12b1 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 12B1S107I sr_ns: RENOLD12B1S107I
r: 02096831 p: 6.617 pid: 89764 b: RENOLD q: 0 st: lt: 15 ean: 0673766042456 sr: RENOLD 40A1S4I sr_no_br: 40A1S4I sr_no_br_cl: 40A1S4I sr_cl: RENOLD40A1S4I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Diameter (pin) 3,97 mm Product line Renold Blue Number of the connecting link 4 Weight (kg/m) 0,6 kg/m Length (pin) 16,4 mm Thickness (outer plate) 1,55 mm Inside width 7,85 mm Thickness (inner plate) 1,55 mm Height 2,1 Type (ISO/ANSI) 40-1 Version (link) Simplex Breaking strength 13900 N Plate height 11,2 mm Diameter (roller) 7,92 mm n: RENOLD 40A1S4I blue 40-1 - simplex 1/2 inch - inner link cn: INNER LINK cn2: INNER LINK cn_clear: INNERLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: blue 40-1 - simplex 1/2 inch - inner link kpn: 40A1S4I kpn_dash: kpn_clear: 40A1S4I bkpn: RENOLD 40A1S4I bkpn_clear: RENOLD 40A1S4I c_path: Home / Drive technology / Chains and sprockets / Chains / Inner link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold inner link sr_no_br_cl_ns: 40A1S4I sr_ns: RENOLD40A1S4I
r: 03030011 p: 6.53 pid: 89557 b: RENOLD q: 8 st: 1 lt: 1 ean: 0673766006571 sr: RENOLD 08B2S26I sr_no_br: 08B2S26I sr_no_br_cl: 08B2S26I sr_cl: RENOLD08B2S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Length (pin) 30,4 mm Product line Renold Blue Weight (kg/m) 1,38 kg/m Thickness (outer plate) 1,55 mm Type (ISO/ANSI) 08B-2 Height 2 Inside width 7,75 mm Breaking strength 31100 N Diameter (pin) 4,45 mm Thickness (inner plate) 1,55 mm Plate height 11,7 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD BLUE 08B-2 No. 26 connecting link duplex 1/2" - 08B2S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: connecting link duplex 1/2" kpn: BLUE 08B-2 No. 26 kpn_dash: BLUE 08B kpn_clear: BLUE08B2No26 bkpn: RENOLD BLUE 08B-2 No. 26 bkpn_clear: RENOLD BLUE08B2No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 08B2S26I sr_ns: RENOLD08B2S26I
r: 03050012 p: 6.28 pid: 89797 b: RENOLD q: 17 st: 1 lt: 1 ean: 0673766034802 sr: RENOLD 06B2S12I sr_no_br: 06B2S12I sr_no_br_cl: 06B2S12I sr_cl: RENOLD06B2S12I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Thickness (inner plate) 1,29 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 0,78 kg/m Length (pin) 23 mm Height 1,3 Thickness (outer plate) 1,04 mm Plate height 8,2 mm Type (ISO/ANSI) 06B-2 Version (link) Duplex Diameter (pin) 3,28 mm Diameter (roller) 6,35 mm Breaking strength 16900 N Inside width 5,72 mm n: RENOLD 06B2S12I reducer BLUE 06b-2 - duplex 3/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 06b-2 - duplex 3/8 inch kpn: 06B2S12I kpn_dash: kpn_clear: 06B2S12I bkpn: RENOLD 06B2S12I bkpn_clear: RENOLD 06B2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 06B2S12I sr_ns: RENOLD06B2S12I
r: 03050014 p: 6.28 pid: 89753 b: RENOLD q: 2 st: 1 lt: 1 ean: 0673766034840 sr: RENOLD 10B2S12I sr_no_br: 10B2S12I sr_no_br_cl: 10B2S12I sr_cl: RENOLD10B2S12I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Thickness (inner plate) 1,55 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 1,69 kg/m Length (pin) 35,4 mm Height 2,5 Thickness (outer plate) 1,55 mm Plate height 14,6 mm Type (ISO/ANSI) 10B-2 Version (link) Duplex Diameter (pin) 5,08 mm Diameter (roller) 10,16 mm Breaking strength 44500 N Inside width 9,65 mm n: RENOLD 10B2S12I reducing link BLUE 10b-2 - duplex 5/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 10b-2 - duplex 5/8 inch kpn: 10B2S12I kpn_dash: kpn_clear: 10B2S12I bkpn: RENOLD 10B2S12I bkpn_clear: RENOLD 10B2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 10B2S12I sr_ns: RENOLD10B2S12I
r: 03030114 p: 5.797 pid: 88057 b: RENOLD q: 0 st: lt: 15 ean: 6623901109289 sr: RENOLD 10B1S11I sr_no_br: 10B1S11I sr_no_br_cl: 10B1S11I sr_cl: RENOLD10B1S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Length (pin) 18,8 mm Product line Renold Blue Weight (kg/m) 0,96 kg/m Thickness (outer plate) 1,55 mm Type (ISO/ANSI) 10B-1 Height 2,5 Inside width 9,65 mm Breaking strength 22200 N Diameter (pin) 5,08 mm Thickness (inner plate) 1,55 mm Plate height 14,6 mm Number of the connecting link 11 Version (link) Simplex n: RENOLD BLUE 10B-1 No. 11 connecting link simplex 5/8" - 10B1S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: connecting link simplex 5/8" kpn: BLUE 10B-1 No. 11 kpn_dash: BLUE 10B kpn_clear: BLUE10B1No11 bkpn: RENOLD BLUE 10B-1 No. 11 bkpn_clear: RENOLD BLUE10B1No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 10B1S11I sr_ns: RENOLD10B1S11I
r: 02096714 p: 5.797 pid: 87587 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 10B1S107I sr_no_br: 10B1S107I sr_no_br_cl: 10B1S107I sr_cl: RENOLD10B1S107I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 5/8 inch Thickness (outer plate) 1,55 mm Weight (kg/m) 0,96 kg/m Height 2,5 Breaking strength 22200 N Length (pin) 18,8 mm Inside width 9,65 mm Diameter (pin) 5,08 mm Thickness (inner plate) 1,55 mm Plate height 14,6 mm Product line Renold Blue Type (ISO/ANSI) 10B-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Blue 10b-1 rivet link simplex 5/8 inch - 10B1S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: rivet link simplex 5/8 inch kpn: Blue 10b-1 kpn_dash: Blue 10b kpn_clear: Blue10b1 bkpn: RENOLD Blue 10b-1 bkpn_clear: RENOLD Blue10b1 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 10B1S107I sr_ns: RENOLD10B1S107I
r: 02096713 p: 5.797 pid: 89710 b: RENOLD q: 0 st: lt: 15 ean: 6623900922926 sr: RENOLD 10B1S4I sr_no_br: 10B1S4I sr_no_br_cl: 10B1S4I sr_cl: RENOLD10B1S4I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Diameter (pin) 5,08 mm Product line Renold Blue Number of the connecting link 4 Weight (kg/m) 0,96 kg/m Length (pin) 18,8 mm Thickness (outer plate) 1,55 mm Inside width 9,65 mm Thickness (inner plate) 1,55 mm Height 2,5 Type (ISO/ANSI) 10B-1 Version (link) Simplex Breaking strength 22200 N Plate height 14,6 mm Diameter (roller) 10,16 mm n: RENOLD 10B1S4I blue 10b-1 - simplex 5/8 inch - inner link cn: INNER LINK cn2: INNER LINK cn_clear: INNERLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: blue 10b-1 - simplex 5/8 inch - inner link kpn: 10B1S4I kpn_dash: kpn_clear: 10B1S4I bkpn: RENOLD 10B1S4I bkpn_clear: RENOLD 10B1S4I c_path: Home / Drive technology / Chains and sprockets / Chains / Inner link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold inner link sr_no_br_cl_ns: 10B1S4I sr_ns: RENOLD10B1S4I
r: 03050070 p: 5.619 pid: 89813 b: RENOLD q: 25 st: 1 lt: 1 ean: 6623900916048 sr: RENOLD GY06B1S30I sr_no_br: GY06B1S30I sr_no_br_cl: GY06B1S30I sr_cl: RENOLDGY06B1S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Thickness (inner plate) 1,29 mm Product line Renold Synergy Number of the connecting link 30 Weight (kg/m) 0,39 kg/m Length (pin) 12,5 mm Height 1,3 Thickness (outer plate) 1,04 mm Plate height 8,2 mm Type (ISO/ANSI) 06B-1 Version (link) Simplex Diameter (pin) 3,28 mm Diameter (roller) 6,35 mm Breaking strength 8900 N Inside width 5,72 mm n: RENOLD GY06B1S30I reducer SYNERGY 06b-1 - simplex 3/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 06b-1 - simplex 3/8 inch kpn: GY06B1S30I kpn_dash: kpn_clear: GY06B1S30I bkpn: RENOLD GY06B1S30I bkpn_clear: RENOLD GY06B1S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY06B1S30I sr_ns: RENOLDGY06B1S30I
r: 02096687 p: 5.481 pid: 88157 b: RENOLD q: 0 st: lt: 15 ean: 0673766034789 sr: RENOLD 06B1S4I sr_no_br: 06B1S4I sr_no_br_cl: 06B1S4I sr_cl: RENOLD06B1S4I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Diameter (pin) 3,28 mm Product line Renold Blue Number of the connecting link 4 Weight (kg/m) 0,39 kg/m Length (pin) 12,5 mm Thickness (outer plate) 1,04 mm Inside width 5,72 mm Thickness (inner plate) 1,29 mm Height 1,3 Type (ISO/ANSI) 06B-1 Version (link) Simplex Breaking strength 8900 N Plate height 8,2 mm Diameter (roller) 6,35 mm n: RENOLD 06B1S4I blue 06b-1 - simplex 3/8 inch - inner link cn: INNER LINK cn2: INNER LINK cn_clear: INNERLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: blue 06b-1 - simplex 3/8 inch - inner link kpn: 06B1S4I kpn_dash: kpn_clear: 06B1S4I bkpn: RENOLD 06B1S4I bkpn_clear: RENOLD 06B1S4I c_path: Home / Drive technology / Chains and sprockets / Chains / Inner link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold inner link sr_no_br_cl_ns: 06B1S4I sr_ns: RENOLD06B1S4I
r: 02096689 p: 5.481 pid: 87990 b: RENOLD q: 0 st: lt: 15 ean: 0673766000913 sr: RENOLD 06B1S107I sr_no_br: 06B1S107I sr_no_br_cl: 06B1S107I sr_cl: RENOLD06B1S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch Thickness (outer plate) 1,04 mm Weight (kg/m) 0,39 kg/m Height 1,3 Breaking strength 8900 N Length (pin) 12,5 mm Inside width 5,72 mm Diameter (pin) 3,28 mm Thickness (inner plate) 1,29 mm Plate height 8,2 mm Product line Renold Blue Type (ISO/ANSI) 06B-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Blue 06b-1 rivet link simplex 3/8 inch - 06B1S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: rivet link simplex 3/8 inch kpn: Blue 06b-1 kpn_dash: Blue 06b kpn_clear: Blue06b1 bkpn: RENOLD Blue 06b-1 bkpn_clear: RENOLD Blue06b1 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 06B1S107I sr_ns: RENOLD06B1S107I
r: 03030102 p: 5.454 pid: 88388 b: RENOLD q: 11 st: 1 lt: 1 ean: 0673766012589 sr: RENOLD GY60A1S26I sr_no_br: GY60A1S26I sr_no_br_cl: GY60A1S26I sr_cl: RENOLDGY60A1S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Length (pin) 25,3 mm Product line Renold Synergy Weight (kg/m) 1,47 kg/m Thickness (outer plate) 2,45 mm Type (ISO/ANSI) 60-1 Height 2,6 Inside width 12,57 mm Breaking strength 31300 N Diameter (pin) 5,94 mm Thickness (inner plate) 2,45 mm Plate height 17,5 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD SYNERGY 60-1 S No. 26 closing link simplex 3/4" - GY60A1S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: closing link simplex 3/4" kpn: SYNERGY 60-1 S No. 26 kpn_dash: SYNERGY 60 kpn_clear: SYNERGY601SNo26 bkpn: RENOLD SYNERGY 60-1 S No. 26 bkpn_clear: RENOLD SYNERGY601SNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: GY60A1S26I sr_ns: RENOLDGY60A1S26I
r: 03050074 p: 5.454 pid: 88199 b: RENOLD q: 4 st: 1 lt: 1 ean: 0673766006441 sr: RENOLD 06B2S30I sr_no_br: 06B2S30I sr_no_br_cl: 06B2S30I sr_cl: RENOLD06B2S30I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Thickness (inner plate) 1,29 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 0,78 kg/m Length (pin) 23 mm Height 1,3 Thickness (outer plate) 1,04 mm Plate height 8,2 mm Type (ISO/ANSI) 06B-2 Version (link) Duplex Diameter (pin) 3,28 mm Diameter (roller) 6,35 mm Breaking strength 16900 N Inside width 5,72 mm n: RENOLD 06B2S30I reducer BLUE 06b-2 - duplex 3/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 06b-2 - duplex 3/8 inch kpn: 06B2S30I kpn_dash: kpn_clear: 06B2S30I bkpn: RENOLD 06B2S30I bkpn_clear: RENOLD 06B2S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 06B2S30I sr_ns: RENOLD06B2S30I
r: 03050258 p: 5.397 pid: 89846 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 111046S4I sr_no_br: 111046S4I sr_no_br_cl: 111046S4I sr_cl: RENOLD111046S4I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Diameter (pin) 4,09 mm Product line Renold Synergy Number of the connecting link 4 Weight (kg/m) 0,35 kg/m Length (pin) 11,4 mm Thickness (outer plate) 0,98 mm Inside width 4,88 mm Thickness (inner plate) 1,13 mm Height 2 Version (link) Simplex Breaking strength 8900 N Plate height 9,6 mm Diameter (roller) 7,75 mm n: RENOLD 111046S4I synergy - simplex 1/2 inch - inner link cn: INNER LINK cn2: INNER LINK cn_clear: INNERLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: synergy - simplex 1/2 inch - inner link kpn: 111046S4I kpn_dash: kpn_clear: 111046S4I bkpn: RENOLD 111046S4I bkpn_clear: RENOLD 111046S4I c_path: Home / Drive technology / Chains and sprockets / Chains / Inner link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold inner link sr_no_br_cl_ns: 111046S4I sr_ns: RENOLD111046S4I
r: 02096693 p: 5.093 pid: 89760 b: RENOLD q: 0 st: lt: 15 ean: 0673766001675 sr: RENOLD 08B1S4I sr_no_br: 08B1S4I sr_no_br_cl: 08B1S4I sr_cl: RENOLD08B1S4I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Diameter (pin) 4,45 mm Product line Renold Blue Number of the connecting link 4 Weight (kg/m) 0,7 kg/m Length (pin) 16,5 mm Thickness (outer plate) 1,55 mm Inside width 7,75 mm Thickness (inner plate) 1,55 mm Height 2 Type (ISO/ANSI) 08B-1 Version (link) Simplex Breaking strength 17800 N Plate height 11,7 mm Diameter (roller) 8,51 mm n: RENOLD 08B1S4I blue 08b-1 - simplex 1/2 inch - inner link cn: INNER LINK cn2: INNER LINK cn_clear: INNERLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: blue 08b-1 - simplex 1/2 inch - inner link kpn: 08B1S4I kpn_dash: kpn_clear: 08B1S4I bkpn: RENOLD 08B1S4I bkpn_clear: RENOLD 08B1S4I c_path: Home / Drive technology / Chains and sprockets / Chains / Inner link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold inner link sr_no_br_cl_ns: 08B1S4I sr_ns: RENOLD08B1S4I
r: 03030142 p: 4.793 pid: 87697 b: RENOLD q: 2 st: 1 lt: 1 ean: 0673766038237 sr: RENOLD 12B1SSS26I sr_no_br: 12B1SSS26I sr_no_br_cl: 12B1SSS26I sr_cl: RENOLD12B1SSS26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Length (pin) 21,9 mm Product line Renold Stainless Steel Weight (kg/m) 1,22 kg/m Thickness (outer plate) 1,81 mm Type (ISO/ANSI) 12B-1 Height 2,6 Inside width 11,68 mm Breaking strength 18640 N Diameter (pin) 5,72 mm Thickness (inner plate) 1,81 mm Plate height 16 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD closing link simplex 3/4" - 12B1SSS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: closing link simplex 3/4" kpn: stainless steel 12B-1 No. 26 kpn_dash: stainless steel 12B kpn_clear: stainlesssteel12B1No26 bkpn: RENOLD stainless steel 12B-1 No. 26 bkpn_clear: RENOLD stainlesssteel12B1No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 12B1SSS26I sr_ns: RENOLD12B1SSS26I
r: 02096817 p: 4.505 pid: 70893 b: RENOLD q: 0 st: lt: 15 ean: 0673766042388 sr: RENOLD 25A1S4I sr_no_br: 25A1S4I sr_no_br_cl: 25A1S4I sr_cl: RENOLD25A1S4I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/4 inch; 6,35 mm Diameter (pin) 2,3 mm Product line Renold Blue Number of the connecting link 4 Weight (kg/m) 0,12 kg/m Length (pin) 7,9 mm Thickness (outer plate) 0,76 mm Inside width 3,1 mm Thickness (inner plate) 0,76 mm Height 1,2 Type (ISO/ANSI) 25-1 Version (link) Simplex Breaking strength 3500 N Plate height 5,9 mm Diameter (roller) 3,3 mm n: RENOLD 25A1S4I blue 25-1 - simplex 1/4 inch - inner link cn: INNER LINK cn2: INNER LINK cn_clear: INNERLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: blue 25-1 - simplex 1/4 inch - inner link kpn: 25A1S4I kpn_dash: kpn_clear: 25A1S4I bkpn: RENOLD 25A1S4I bkpn_clear: RENOLD 25A1S4I c_path: Home / Drive technology / Chains and sprockets / Chains / Inner link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold inner link sr_no_br_cl_ns: 25A1S4I sr_ns: RENOLD25A1S4I
r: 03030236 p: 4.464 pid: 87711 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 05B2S107 sr_no_br: 05B2S107 sr_no_br_cl: 05B2S107 sr_cl: RENOLD05B2S107 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 8 mm Thickness (outer plate) 0,76 mm Weight (kg/m) 0,36 kg/m Height 1,5 Breaking strength 7800 N Transverse pitch 5,64 mm Length (pin) 14,3 mm Inside width 3 mm Diameter (pin) 2,31 mm Thickness (inner plate) 0,76 mm Plate height 7,11 mm Product line Renold Blue Type (ISO/ANSI) 05B-2 Number of the connecting link 107 Version (link) Duplex n: RENOLD Blue 05b-2 rivet link duplex 5/16 inch - 05B2S107 cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: rivet link duplex 5/16 inch kpn: Blue 05b-2 kpn_dash: Blue 05b kpn_clear: Blue05b2 bkpn: RENOLD Blue 05b-2 bkpn_clear: RENOLD Blue05b2 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 05B2S107 sr_ns: RENOLD05B2S107
