r: 02096699 p: 3.64 pid: 89544 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 111043S26I sr_no_br: 111043S26I sr_no_br_cl: 111043S26I sr_cl: RENOLD111043S26I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Length (pin) 11,4 mm Product line Renold Blue Weight (kg/m) 0,35 kg/m Thickness (outer plate) 0,98 mm Height 2 Inside width 4,88 mm Breaking strength 8900 N Diameter (pin) 4,09 mm Thickness (inner plate) 1,13 mm Plate height 9,6 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD BLUE 080-1 No. 26 closing link simplex 1/2" - 111043S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link simplex 1/2" kpn: BLUE 080-1 No. 26 kpn_dash: BLUE 080 kpn_clear: BLUE0801No26 bkpn: RENOLD BLUE 080-1 No. 26 bkpn_clear: RENOLD BLUE0801No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 111043S26I sr_ns: RENOLD111043S26I
r: 03030142 p: 3.264 pid: 87697 b: RENOLD q: 2 st: 1 lt: 1 ean: 0673766038237 sr: RENOLD 12B1SSS26I sr_no_br: 12B1SSS26I sr_no_br_cl: 12B1SSS26I sr_cl: RENOLD12B1SSS26I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Length (pin) 21,9 mm Product line Renold Stainless Steel Weight (kg/m) 1,22 kg/m Thickness (outer plate) 1,81 mm Type (ISO/ANSI) 12B-1 Height 2,6 Inside width 11,68 mm Breaking strength 18640 N Diameter (pin) 5,72 mm Thickness (inner plate) 1,81 mm Plate height 16 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD stainless steel 12B-1 No. 26 closing link simplex 3/4" - 12B1SSS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: closing link simplex 3/4" kpn: stainless steel 12B-1 No. 26 kpn_dash: stainless steel 12B kpn_clear: stainlesssteel12B1No26 bkpn: RENOLD stainless steel 12B-1 No. 26 bkpn_clear: RENOLD stainlesssteel12B1No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 12B1SSS26I sr_ns: RENOLD12B1SSS26I
r: 03030038 p: 2.809 pid: 88372 b: RENOLD q: 3 st: 1 lt: 1 ean: 6623900533948 sr: RENOLD 50A2S26I sr_no_br: 50A2S26I sr_no_br_cl: 50A2S26I sr_cl: RENOLD50A2S26I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Length (pin) 38,4 mm Product line Renold Blue Weight (kg/m) 1,98 kg/m Thickness (outer plate) 2,04 mm Type (ISO/ANSI) 50-2 Height 2,7 Inside width 9,4 mm Breaking strength 43600 N Diameter (pin) 5,08 mm Thickness (inner plate) 2,04 mm Plate height 14,6 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD BLUE 50-2 No. 26 connecting link duplex 5/8" - 50A2S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: connecting link duplex 5/8" kpn: BLUE 50-2 No. 26 kpn_dash: BLUE 50 kpn_clear: BLUE502No26 bkpn: RENOLD BLUE 50-2 No. 26 bkpn_clear: RENOLD BLUE502No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 50A2S26I sr_ns: RENOLD50A2S26I
r: 03030083 p: 2.74 pid: 87673 b: RENOLD q: 15 st: 1 lt: 1 ean: 6623901212323 sr: RENOLD 04B1S26I sr_no_br: 04B1S26I sr_no_br_cl: 04B1S26I sr_cl: RENOLD04B1S26I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 6 mm Diameter (pin) 1,85 mm Product line Renold Blue Thickness (outer plate) 0,6 mm Type (ISO/ANSI) 04B-1 Height 9,5 Inside width 4 mm Length (pin) 7,8 mm Thickness (inner plate) 0,6 mm Plate height 5 mm Number of the connecting link 26 Version (link) Simplex n: RENOLD BLUE 04B-1 No. 26 closing link simplex 2 1/2" - 04B1S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link simplex 2 1/2" kpn: BLUE 04B-1 No. 26 kpn_dash: BLUE 04B kpn_clear: BLUE04B1No26 bkpn: RENOLD BLUE 04B-1 No. 26 bkpn_clear: RENOLD BLUE04B1No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 04B1S26I sr_ns: RENOLD04B1S26I
r: 02096680 p: 2.381 pid: 89541 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 05B1S107 sr_no_br: 05B1S107 sr_no_br_cl: 05B1S107 sr_cl: RENOLD05B1S107 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 8 mm Thickness (outer plate) 0,76 mm Weight (kg/m) 0,18 kg/m Height 1,5 Breaking strength 4400 N Length (pin) 8,6 mm Inside width 3 mm Diameter (pin) 2,31 mm Thickness (inner plate) 0,76 mm Plate height 7,11 mm Product line Renold Blue Type (ISO/ANSI) 05B-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Blue 05b-1 rivet link simplex 5/16 inch - 05B1S107 cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: rivet link simplex 5/16 inch kpn: Blue 05b-1 kpn_dash: Blue 05b kpn_clear: Blue05b1 bkpn: RENOLD Blue 05b-1 bkpn_clear: RENOLD Blue05b1 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 05B1S107 sr_ns: RENOLD05B1S107
r: 02274785 p: 182.413 pid: 88594 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 16B2SNS12I sr_no_br: 16B2SNS12I sr_no_br_cl: 16B2SNS12I sr_cl: RENOLD16B2SNS12I sr_dash: sold: 0 p_range: none act: 1 avo: av: Pitch 1 inch; 25,4 mm Thickness (inner plate) 3,76 mm Product line Renold Syno Number of the connecting link 12 Weight (kg/m) 5,4 kg/m Length (pin) 66,8 mm Height 3 Thickness (outer plate) 3,06 mm Plate height 20,2 mm Type (ISO/ANSI) 16B-2 Version (link) Duplex Diameter (pin) 8,27 mm Diameter (roller) 15,88 mm Breaking strength 106000 N Inside width 17,02 mm n: RENOLD 16B2SNS12I reducer SYNO 16b-2 - duplex 1 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: The Renold Syno nickel-plated chain is ideal for use in applications where hygiene is paramount and lubricant contamination must be avoided. The sintered canister contains a food industry-approved lubricant, which means the chain almost never needs re-lubrication. The roller's coating is also suitable for use in the food industry; a unique feature for any chain. Available in packaged lengths of 3.05 m (10 feet) from 06B to 24B and ANSI 40 to ANSI 100, simplex and duplex with a standard pin diameter. The Renold Syno nickel-plated chain is dimensionally interchangeable with a standard roller chain and even compatible with standard sprockets. The Syno nickel-plated chain offers the excellent wear and fatigue resistance you would expect from a Renold chain and outlasts competitors' products touted as requiring little or no lubrication. The chain has been extensively tested and trialled by major companies in the food industry. If you need to operate with minimal lubrication but don't want to compromise on quality, we can increase your productivity, reduce downtime and save you time and money. Key features: Normally no lubrication required The outside of the chain is completely dry to the touch Nickel-plated links Lubricant in the sintered bushings approved for the food industry Unique roller coating approved for the food industry Dimensionally interchangeable with standard chains Pin diameter with ISO standard, therefore standard fixings to locking links Available in packaged lengths of 3.05 m (10 ft) from 06B to 24B and ANSI 40 to ANSI 100 ds: dsc: kts: reducer SYNO 16b-2 - duplex 1 inch kpn: 16B2SNS12I kpn_dash: kpn_clear: 16B2SNS12I bkpn: RENOLD 16B2SNS12I bkpn_clear: RENOLD 16B2SNS12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 16B2SNS12I sr_ns: RENOLD16B2SNS12I
r: 03050039 p: 38.93 pid: 88614 b: RENOLD q: 0 st: lt: 8 ean: sr: RENOLD 60A2S12I sr_no_br: 60A2S12I sr_no_br_cl: 60A2S12I sr_cl: RENOLD60A2S12I sr_dash: sold: 0 p_range: none act: 1 avo: av: Pitch 3/4 inch; 19,05 mm Height 2,6 Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 2,91 kg/m Length (pin) 48,1 mm Thickness (outer plate) 2,45 mm Thickness (inner plate) 2,45 mm Plate height 17,5 mm Type (ISO/ANSI) 60-2 Version (link) Duplex Diameter (pin) 5,94 mm Diameter (roller) 11,91 mm Breaking strength 62600 N Inside width 12,57 mm n: RENOLD 60A2S12I reducing link BLUE 60-2 - duplex 3/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 60-2 - duplex 3/4 inch kpn: 60A2S12I kpn_dash: kpn_clear: 60A2S12I bkpn: RENOLD 60A2S12I bkpn_clear: RENOLD 60A2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 60A2S12I sr_ns: RENOLD60A2S12I
