r: 02096871 p: 60.165 pid: 87775 b: RENOLD q: 0 st: lt: 15 ean: 6623900525387 sr: RENOLD 100A1S12I sr_no_br: 100A1S12I sr_no_br_cl: 100A1S12I sr_cl: RENOLD100A1S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/4 inch; 31,75 mm Thickness (inner plate) 4,06 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 4,2 kg/m Length (pin) 39,7 mm Height 4,2 Thickness (outer plate) 4,06 mm Plate height 30,17 mm Type (ISO/ANSI) 100-1 Version (link) Simplex Diameter (pin) 9,54 mm Diameter (roller) 19,05 mm Breaking strength 87000 N Inside width 18,9 mm n: RENOLD 100A1S12I reducing link BLUE 100-1 - simplex 1 1/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 100-1 - simplex 1 1/4 inch kpn: 100A1S12I kpn_dash: kpn_clear: 100A1S12I bkpn: RENOLD 100A1S12I bkpn_clear: RENOLD 100A1S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 100A1S12I sr_ns: RENOLD100A1S12I
r: 03030040 p: 58.365 pid: 89577 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 80A2S26I sr_no_br: 80A2S26I sr_no_br_cl: 80A2S26I sr_cl: RENOLD80A2S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 61,9 mm Product line Renold Blue Weight (kg/m) 5,5 kg/m Thickness (outer plate) 3,25 mm Type (ISO/ANSI) 80-2 Height 3 Inside width 15,75 mm Breaking strength 111200 N Diameter (pin) 7,94 mm Thickness (inner plate) 3,25 mm Plate height 24,13 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD BLUE 80-2 No. 26 connecting link duplex 1" - 80A2S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: connecting link duplex 1" kpn: BLUE 80-2 No. 26 kpn_dash: BLUE 80 kpn_clear: BLUE802No26 bkpn: RENOLD BLUE 80-2 No. 26 bkpn_clear: RENOLD BLUE802No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 80A2S26I sr_ns: RENOLD80A2S26I
r: 02097190 p: 58.365 pid: 89528 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 80A2S11I sr_no_br: 80A2S11I sr_no_br_cl: 80A2S11I sr_cl: RENOLD80A2S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 61,9 mm Product line Renold Blue Weight (kg/m) 5,5 kg/m Thickness (outer plate) 3,25 mm Type (ISO/ANSI) 80-2 Height 3 Inside width 15,75 mm Breaking strength 111200 N Diameter (pin) 7,94 mm Thickness (inner plate) 3,25 mm Plate height 24,13 mm Number of the connecting link 11 Version (link) Duplex n: RENOLD BLUE 80-2 No. 11 connecting link duplex 1" - 80A2S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: connecting link duplex 1" kpn: BLUE 80-2 No. 11 kpn_dash: BLUE 80 kpn_clear: BLUE802No11 bkpn: RENOLD BLUE 80-2 No. 11 bkpn_clear: RENOLD BLUE802No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 80A2S11I sr_ns: RENOLD80A2S11I
r: 03030285 p: 58.347 pid: 89690 b: RENOLD q: 0 st: lt: 15 ean: 0673766043040 sr: RENOLD GY100A1S11I sr_no_br: GY100A1S11I sr_no_br_cl: GY100A1S11I sr_cl: RENOLDGY100A1S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/4 inch; 31,75 mm Length (pin) 39,7 mm Product line Renold Synergy Weight (kg/m) 4,2 kg/m Thickness (outer plate) 4,06 mm Type (ISO/ANSI) 100-1 Height 4,2 Inside width 18,9 mm Breaking strength 87000 N Diameter (pin) 9,54 mm Thickness (inner plate) 4,06 mm Plate height 30,17 mm Number of the connecting link 11 Version (link) Simplex n: RENOLD SYNERGY 100-1 S No. 11 closing link simplex 1 1/4" - GY100A1S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: closing link simplex 1 1/4" kpn: SYNERGY 100-1 S No. 11 kpn_dash: SYNERGY 100 kpn_clear: SYNERGY1001SNo11 bkpn: RENOLD SYNERGY 100-1 S No. 11 bkpn_clear: RENOLD SYNERGY1001SNo11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: GY100A1S11I sr_ns: RENOLDGY100A1S11I
r: 03030262 p: 58.347 pid: 89682 b: RENOLD q: 0 st: lt: 15 ean: 6623901323364 sr: RENOLD GY100A1S107I sr_no_br: GY100A1S107I sr_no_br_cl: GY100A1S107I sr_cl: RENOLDGY100A1S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/4 inch Thickness (outer plate) 4,06 mm Weight (kg/m) 4,2 kg/m Height 4,2 Breaking strength 87000 N Length (pin) 39,7 mm Inside width 18,9 mm Diameter (pin) 9,54 mm Thickness (inner plate) 4,06 mm Plate height 30,17 mm Product line Renold Synergy Type (ISO/ANSI) 100-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Synergy 100-1 latch link simplex 1 1/4 inch - GY100A1S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: latch link simplex 1 1/4 inch kpn: Synergy 100-1 kpn_dash: Synergy 100 kpn_clear: Synergy1001 bkpn: RENOLD Synergy 100-1 bkpn_clear: RENOLD Synergy1001 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: GY100A1S107I sr_ns: RENOLDGY100A1S107I
r: 03050168 p: 58.181 pid: 88233 b: RENOLD q: 13 st: 1 lt: 1 ean: 4042279004675 sr: RENOLD GY16B1S12I sr_no_br: GY16B1S12I sr_no_br_cl: GY16B1S12I sr_cl: RENOLDGY16B1S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Thickness (inner plate) 3,1 mm Product line Renold Synergy Number of the connecting link 12 Weight (kg/m) 2,8 kg/m Length (pin) 34,9 mm Height 2,2 Thickness (outer plate) 3,1 mm Plate height 21,08 mm Type (ISO/ANSI) 16B-1 Version (link) Simplex Diameter (pin) 8,28 mm Diameter (roller) 15,88 mm Breaking strength 60000 N Inside width 17,02 mm n: RENOLD GY16B1S12I reducer SYNERGY 16b-1 - simplex 1 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 16b-1 - simplex 1 inch kpn: GY16B1S12I kpn_dash: kpn_clear: GY16B1S12I bkpn: RENOLD GY16B1S12I bkpn_clear: RENOLD GY16B1S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY16B1S12I sr_ns: RENOLDGY16B1S12I
r: 02274428 p: 55.639 pid: 88021 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 60A2SSS26I sr_no_br: 60A2SSS26I sr_no_br_cl: 60A2SSS26I sr_cl: RENOLD60A2SSS26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Length (pin) 48,1 mm Product line Renold Stainless Steel Weight (kg/m) 2,91 kg/m Thickness (outer plate) 2,45 mm Type (ISO/ANSI) 60-2 Height 2,6 Inside width 12,57 mm Breaking strength 60000 N Diameter (pin) 5,94 mm Thickness (inner plate) 2,45 mm Plate height 17,5 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD stainless steel 60-2 No. 26 connecting link duplex 3/4" - 60A2SSS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: connecting link duplex 3/4" kpn: stainless steel 60-2 No. 26 kpn_dash: stainless steel 60 kpn_clear: stainlesssteel602No26 bkpn: RENOLD stainless steel 60-2 No. 26 bkpn_clear: RENOLD stainlesssteel602No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 60A2SSS26I sr_ns: RENOLD60A2SSS26I
r: 03030284 p: 55.58 pid: 89685 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD GY80A1S11I sr_no_br: GY80A1S11I sr_no_br_cl: GY80A1S11I sr_cl: RENOLDGY80A1S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 23,7 mm Product line Renold Synergy Weight (kg/m) 2,8 kg/m Thickness (outer plate) 3,25 mm Type (ISO/ANSI) 80-1 Height 3 Inside width 15,75 mm Breaking strength 55600 N Diameter (pin) 7,94 mm Thickness (inner plate) 3,25 mm Plate height 24,13 mm Number of the connecting link 11 Version (link) Simplex n: RENOLD SYNERGY 80-1 S No. 11 closing link simplex 1" - GY80A1S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: closing link simplex 1" kpn: SYNERGY 80-1 S No. 11 kpn_dash: SYNERGY 80 kpn_clear: SYNERGY801SNo11 bkpn: RENOLD SYNERGY 80-1 S No. 11 bkpn_clear: RENOLD SYNERGY801SNo11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: GY80A1S11I sr_ns: RENOLDGY80A1S11I
r: 02097245 p: 55.506 pid: 88167 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 40A3S12I sr_no_br: 40A3S12I sr_no_br_cl: 40A3S12I sr_cl: RENOLD40A3S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Thickness (inner plate) 1,55 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 1,8 kg/m Length (pin) 45,1 mm Height 2,1 Thickness (outer plate) 1,55 mm Plate height 11,2 mm Type (ISO/ANSI) 40-3 Version (link) Triplex Diameter (pin) 3,97 mm Diameter (roller) 7,92 mm Breaking strength 41700 N Inside width 7,85 mm n: RENOLD 40A3S12I reducer BLUE 40-3 - plywood 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 40-3 - plywood 1/2 inch kpn: 40A3S12I kpn_dash: kpn_clear: 40A3S12I bkpn: RENOLD 40A3S12I bkpn_clear: RENOLD 40A3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 40A3S12I sr_ns: RENOLD40A3S12I
r: 03030094 p: 54.876 pid: 87680 b: RENOLD q: 10 st: 1 lt: 1 ean: 0673766039449 sr: RENOLD GY16B2S26I sr_no_br: GY16B2S26I sr_no_br_cl: GY16B2S26I sr_cl: RENOLDGY16B2S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 66,8 mm Product line Renold Synergy Weight (kg/m) 5,5 kg/m Thickness (outer plate) 3,1 mm Type (ISO/ANSI) 16B-2 Height 2,2 Inside width 17,02 mm Breaking strength 106000 N Diameter (pin) 8,28 mm Thickness (inner plate) 4,12 mm Plate height 21,08 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD SYNERGY 16B-2 S No. 26 connecting link duplex 1" - GY16B2S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: connecting link duplex 1" kpn: SYNERGY 16B-2 S No. 26 kpn_dash: SYNERGY 16B kpn_clear: SYNERGY16B2SNo26 bkpn: RENOLD SYNERGY 16B-2 S No. 26 bkpn_clear: RENOLD SYNERGY16B2SNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: GY16B2S26I sr_ns: RENOLDGY16B2S26I
r: 03050079 p: 52.231 pid: 88623 b: RENOLD q: 0 st: lt: 15 ean: 0673766009046 sr: RENOLD GY08B3S30I sr_no_br: GY08B3S30I sr_no_br_cl: GY08B3S30I sr_cl: RENOLDGY08B3S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Thickness (inner plate) 1,55 mm Product line Renold Synergy Number of the connecting link 30 Weight (kg/m) 2,06 kg/m Length (pin) 44,3 mm Height 2 Thickness (outer plate) 1,55 mm Plate height 11,7 mm Type (ISO/ANSI) 08B-3 Version (link) Triplex Diameter (pin) 4,45 mm Diameter (roller) 8,51 mm Breaking strength 44500 N Inside width 7,75 mm n: RENOLD GY08B3S30I reducer SYNERGY 08b-3 - plywood 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 08b-3 - plywood 1/2 inch kpn: GY08B3S30I kpn_dash: kpn_clear: GY08B3S30I bkpn: RENOLD GY08B3S30I bkpn_clear: RENOLD GY08B3S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY08B3S30I sr_ns: RENOLDGY08B3S30I
r: 03030008 p: 52.024 pid: 88350 b: RENOLD q: 8 st: 1 lt: 1 ean: 0673766004126 sr: RENOLD 24B1S11I sr_no_br: 24B1S11I sr_no_br_cl: 24B1S11I sr_cl: RENOLD24B1S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/2 inch; 38,1 mm Length (pin) 52,6 mm Product line Renold Blue Weight (kg/m) 7,45 kg/m Thickness (outer plate) 5,08 mm Type (ISO/ANSI) 24B-1 Height 6,8 Inside width 25,4 mm Breaking strength 160000 N Diameter (pin) 14,63 mm Thickness (inner plate) 6,1 mm Plate height 33,4 mm Number of the connecting link 11 Version (link) Simplex n: RENOLD BLUE 24B-1 No. 11 closing link simplex 1 1/2" - 24B1S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link simplex 1 1/2" kpn: BLUE 24B-1 No. 11 kpn_dash: BLUE 24B kpn_clear: BLUE24B1No11 bkpn: RENOLD BLUE 24B-1 No. 11 bkpn_clear: RENOLD BLUE24B1No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 24B1S11I sr_ns: RENOLD24B1S11I
r: 03030307 p: 52.024 pid: 89703 b: RENOLD q: 0 st: lt: 15 ean: 0673766004102 sr: RENOLD 24B1S107I sr_no_br: 24B1S107I sr_no_br_cl: 24B1S107I sr_cl: RENOLD24B1S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/2 inch Thickness (outer plate) 5,08 mm Weight (kg/m) 7,45 kg/m Height 6,8 Breaking strength 160000 N Length (pin) 52,6 mm Inside width 25,4 mm Diameter (pin) 14,63 mm Thickness (inner plate) 6,1 mm Plate height 33,4 mm Product line Renold Blue Type (ISO/ANSI) 24B-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Blue 24b-1 rivet link simplex 1 1/2 inch - 24B1S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: rivet link simplex 1 1/2 inch kpn: Blue 24b-1 kpn_dash: Blue 24b kpn_clear: Blue24b1 bkpn: RENOLD Blue 24b-1 bkpn_clear: RENOLD Blue24b1 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 24B1S107I sr_ns: RENOLD24B1S107I
r: 03050338 p: 52.024 pid: 88672 b: RENOLD q: 0 st: lt: 15 ean: 0673766004188 sr: RENOLD 24B1S4I sr_no_br: 24B1S4I sr_no_br_cl: 24B1S4I sr_cl: RENOLD24B1S4I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/2 inch; 38,1 mm Diameter (pin) 14,63 mm Product line Renold Blue Number of the connecting link 4 Weight (kg/m) 7,45 kg/m Length (pin) 52,6 mm Thickness (outer plate) 5,08 mm Inside width 25,4 mm Thickness (inner plate) 6,1 mm Height 6,8 Type (ISO/ANSI) 24B-1 Version (link) Simplex Breaking strength 160000 N Plate height 33,4 mm Diameter (roller) 25,4 mm n: RENOLD 24B1S4I blue 24b-1 - simplex 1 1/2 inch - inner link cn: INNER LINK cn2: INNER LINK cn_clear: INNERLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: blue 24b-1 - simplex 1 1/2 inch - inner link kpn: 24B1S4I kpn_dash: kpn_clear: 24B1S4I bkpn: RENOLD 24B1S4I bkpn_clear: RENOLD 24B1S4I c_path: Home / Drive technology / Chains and sprockets / Chains / Inner link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold inner link sr_no_br_cl_ns: 24B1S4I sr_ns: RENOLD24B1S4I
r: 03050085 p: 50.578 pid: 88207 b: RENOLD q: 52 st: 1 lt: 1 ean: 0673766031382 sr: RENOLD GY60A2S30I sr_no_br: GY60A2S30I sr_no_br_cl: GY60A2S30I sr_cl: RENOLDGY60A2S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Thickness (inner plate) 2,45 mm Product line Renold Synergy Number of the connecting link 30 Weight (kg/m) 1,47 kg/m Length (pin) 48,1 mm Height 2,6 Thickness (outer plate) 2,45 mm Plate height 17,5 mm Type (ISO/ANSI) 60-2 Version (link) Simplex Diameter (pin) 5,94 mm Diameter (roller) 11,91 mm Breaking strength 31300 N Inside width 12,57 mm n: RENOLD GY60A2S30I reduction gear unit SYNERGY 60-2 - simplex 3/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reduction gear unit SYNERGY 60-2 - simplex 3/4 inch kpn: GY60A2S30I kpn_dash: kpn_clear: GY60A2S30I bkpn: RENOLD GY60A2S30I bkpn_clear: RENOLD GY60A2S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY60A2S30I sr_ns: RENOLDGY60A2S30I
r: 03050105 p: 50.053 pid: 88635 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 12B3S30I sr_no_br: 12B3S30I sr_no_br_cl: 12B3S30I sr_cl: RENOLD12B3S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Thickness (inner plate) 1,81 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 3,59 kg/m Length (pin) 60,9 mm Height 2,6 Thickness (outer plate) 1,81 mm Plate height 16 mm Type (ISO/ANSI) 12B-3 Version (link) Triplex Diameter (pin) 5,72 mm Diameter (roller) 12,07 mm Breaking strength 86700 N Inside width 11,68 mm n: RENOLD 12B3S30I reducer BLUE 12b-3 - plywood 3/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 12b-3 - plywood 3/4 inch kpn: 12B3S30I kpn_dash: kpn_clear: 12B3S30I bkpn: RENOLD 12B3S30I bkpn_clear: RENOLD 12B3S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 12B3S30I sr_ns: RENOLD12B3S30I
r: 03030591 p: 48.749 pid: 87770 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 60A2SNS26I sr_no_br: 60A2SNS26I sr_no_br_cl: 60A2SNS26I sr_cl: RENOLD60A2SNS26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Length (pin) 49,8 mm Product line Renold Syno Weight (kg/m) 3,4 kg/m Thickness (outer plate) 2,45 mm Type (ISO/ANSI) 60-2 Height 2,5 Inside width 12,57 mm Breaking strength 62600 N Diameter (pin) 5,95 mm Thickness (inner plate) 3,23 mm Plate height 17,5 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD SYNO 60-2 SN No. 26 connecting link duplex 3/4" - 60A2SNS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: The Renold Syno nickel-plated chain is ideal for use in applications where hygiene is paramount and lubricant contamination must be avoided. The sintered canister contains a food industry-approved lubricant, which means the chain almost never needs re-lubrication. The roller's coating is also suitable for use in the food industry; a unique feature for any chain. Available in packaged lengths of 3.05 m (10 feet) from 06B to 24B and ANSI 40 to ANSI 100, simplex and duplex with a standard pin diameter. The Renold Syno nickel-plated chain is dimensionally interchangeable with a standard roller chain and even compatible with standard sprockets. The Syno nickel-plated chain offers the excellent wear and fatigue resistance you would expect from a Renold chain and outlasts competitors' products touted as requiring little or no lubrication. The chain has been extensively tested and trialled by major companies in the food industry. If you need to operate with minimal lubrication but don't want to compromise on quality, we can increase your productivity, reduce downtime and save you time and money. Key features: Normally no lubrication required The outside of the chain is completely dry to the touch Nickel-plated links Lubricant in the sintered bushings approved for the food industry Unique roller coating approved for the food industry Dimensionally interchangeable with standard chains Pin diameter with ISO standard, therefore standard fixings to locking links Available in packaged lengths of 3.05 m (10 ft) from 06B to 24B and ANSI 40 to ANSI 100 ds: dsc: kts: connecting link duplex 3/4" kpn: SYNO 60-2 SN No. 26 kpn_dash: SYNO 60 kpn_clear: SYNO602SNNo26 bkpn: RENOLD SYNO 60-2 SN No. 26 bkpn_clear: RENOLD SYNO602SNNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 60A2SNS26I sr_ns: RENOLD60A2SNS26I
r: 03030055 p: 48.264 pid: 89580 b: RENOLD q: 2 st: 1 lt: 1 ean: 0673766004362 sr: RENOLD 32B1S11I sr_no_br: 32B1S11I sr_no_br_cl: 32B1S11I sr_cl: RENOLD32B1S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 2 inch; 50,8 mm Length (pin) 63,4 mm Product line Renold Blue Weight (kg/m) 10,1 kg/m Thickness (outer plate) 6,35 mm Type (ISO/ANSI) 32B-1 Height 8 Inside width 30,99 mm Breaking strength 250000 N Diameter (pin) 17,81 mm Thickness (inner plate) 7,11 mm Plate height 42,29 mm Number of the connecting link 11 Version (link) Simplex n: RENOLD BLUE 32B-1 No. 11 closing link simplex 2" - 32B1S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link simplex 2" kpn: BLUE 32B-1 No. 11 kpn_dash: BLUE 32B kpn_clear: BLUE32B1No11 bkpn: RENOLD BLUE 32B-1 No. 11 bkpn_clear: RENOLD BLUE32B1No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 32B1S11I sr_ns: RENOLD32B1S11I
r: 03030311 p: 47.066 pid: 89663 b: RENOLD q: 0 st: lt: 15 ean: 0673766007400 sr: RENOLD 20B2S107I sr_no_br: 20B2S107I sr_no_br_cl: 20B2S107I sr_cl: RENOLD20B2S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/4 inch Thickness (outer plate) 3,61 mm Weight (kg/m) 7,8 kg/m Height 2,7 Breaking strength 170000 N Transverse pitch 36,45 mm Length (pin) 76,7 mm Inside width 19,56 mm Diameter (pin) 10,19 mm Thickness (inner plate) 4,62 mm Plate height 26,42 mm Product line Renold Blue Type (ISO/ANSI) 20B-2 Number of the connecting link 107 Version (link) Duplex n: RENOLD Blue 20b-2 rivet duplex 1 1/4 inch - 20B2S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: rivet duplex 1 1/4 inch kpn: Blue 20b-2 kpn_dash: Blue 20b kpn_clear: Blue20b2 bkpn: RENOLD Blue 20b-2 bkpn_clear: RENOLD Blue20b2 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: 20B2S107I sr_ns: RENOLD20B2S107I
r: 03030015 p: 47.066 pid: 89584 b: RENOLD q: 0 st: lt: 15 ean: 0673766007462 sr: RENOLD 20B2S26I sr_no_br: 20B2S26I sr_no_br_cl: 20B2S26I sr_cl: RENOLD20B2S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/4 inch; 31,75 mm Length (pin) 76,7 mm Product line Renold Blue Weight (kg/m) 7,8 kg/m Thickness (outer plate) 3,61 mm Type (ISO/ANSI) 20B-2 Height 2,7 Inside width 19,56 mm Breaking strength 170000 N Diameter (pin) 10,19 mm Thickness (inner plate) 4,62 mm Plate height 26,42 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD BLUE 20B-2 No. 26 connecting link duplex 1 1/4" - 20B2S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: connecting link duplex 1 1/4" kpn: BLUE 20B-2 No. 26 kpn_dash: BLUE 20B kpn_clear: BLUE20B2No26 bkpn: RENOLD BLUE 20B-2 No. 26 bkpn_clear: RENOLD BLUE20B2No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 20B2S26I sr_ns: RENOLD20B2S26I
