_

TEC7 WP7-402 wall injection cream "Stop Rising Moisture" (3 x 550 ml sausages) - 602060000

• Net volume: 4,4 l
• ADR packing group: Not applicable
• ADR class: Not applicable

Delivery time average 9 days.

92.20

€76.20 excl. VAT

[SEARCH SCORE
Sold desc:
1, 1371.564, 76.198 ]
query took: 1779139586.9685

layer :



r: 03203996
p: 76.198
pid: 154953
b: TEC7
q: 0
st:
lt: 6
ean: 5414195011737
sr: TEC7 602060000
sr_no_br: 602060000
sr_no_br_cl: 602060000
sr_cl: TEC7602060000
sr_dash:
sold: 1371.564
p_range: none
type: standard
act: 1
avo: 1
av: Net volume 4,4 l ADR packing group ADR class UN number EUH-statements EUH208 Physical state Solid Flash point 64 °C
n: TEC7 WP7-402 wall injection cream "Stop Rising Moisture" (3 x 550 ml sausages) - 602060000
cn: SEALANT
cn2: SEALANT
cn_clear: SEALANT
d: Product description WALL INJECTION CREAM Water-repellent barrier in walls Easy application without waste, gun or pressure Even for walls with 95% moisture content Safe, solvent-free and odourless This final solution against rising damp forms a water-repellent, horizontal barrier in walls For all types of brick and rapid construction brick, even hollow ones Can be used as a joint sealant in solid natural stone walls Applicable inside and outside WTCB AAA+ Instructions Remove skirting boards, cover plates of sockets and all plastering up to 25 cm above the visible moisture attack or salt efflorescence Drill a 12 mm diameter hole every 10 cm. The depth is the wall thickness minus 5 cm For fastest effectiveness, drill into the lowest horizontal cement joint, above the ground surface outside Inject double walls and walls thicker than 40 cm inside and outside at the same height For very porous stone such as sandstone, ironstone or some types of limestone: it is best to also inject the stone itself. Follow the lowest joint in natural stone. If there is an old water barrier, drill below that level Drill several star-shaped holes in corners for complete impregnation Remove all drilling dust from the holes Screw the injection hose onto the sausage. Insert the hose into the drill holes to the back and fill with a slow retreating motion Leave the last cm unfilled Seal the holes with Tec7 Filler After a few days to weeks (depending on how dry the wall is) a +/- 10 cm thick water-repellent layer will have been formed across the entire width of the wall. The wall will take longer to dry, depending on the thickness of the wall, the weather conditions and the moisture content If necessary, measure the evolution with a moisture meter If the walls do not dry, or stains appear at normal humidity, there is heavy salt stress. This can be remedied by a wall treatment with WP7-501 Wall + Basement Waterproofing Penetrating driving rain that prevents drying can be remedied by facade treatment with WP7- 401 Facade Waterproof Wait to finish until the walls are thoroughly dry. Good ventilation promotes the drying process. Wait at least two weeks before installing a construction dryer if necessary Do not install a retaining wall to prevent moisture problems in the form of corrosion, deterioration of the walls and severe mould or occurrence of house fungus
ds:
dsc:
kts: wall injection cream "Stop Rising Moisture" (3 x 550 ml sausages)
kpn: WP7-402
kpn_dash: WP7
kpn_clear: WP7402
bkpn: TEC7 WP7-402
bkpn_clear: TEC7 WP7402
c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 sealant
sr_no_br_cl_ns: 602060000
sr_ns: TEC7602060000

_

Click for more items in this promotion!

TEC7 Tecryl professional painting sealant for filling and joints white paintable (310 ml) - 528100000

• ADR packing group: Not applicable
• ADR class: Not applicable
• UN number: Not applicable

Delivery time average 9 days.

5.53

€4.57 excl. VAT

[SEARCH SCORE
Sold desc:
1, 1041.96, 4.57 ]
query took: 1779139586.9686

layer :



r: 02956385
p: 4.57
pid: 155299
b: TEC7
q: 0
st:
lt: 6
ean: 5414195005392
sr: TEC7 528100000
sr_no_br: 528100000
sr_no_br_cl: 528100000
sr_cl: TEC7528100000
sr_dash:
sold: 1041.96
p_range: none
type: standard
act: 1
avo: 1
av: ADR packing group ADR class UN number EUH-statements EUH208 Physical state Solid Flash point > 150 °C Packaging Cartridge Net volume 310 ml
n: TEC7 Tecryl professional painting sealant for filling and joints white paintable (310 ml) - 528100000
cn: SEALANT
cn2: SEALANT
cn_clear: SEALANT
d: Product description PROFESSIONAL PAINTING SEALANT Tec7-quality acrylic sealant Almost odourless Easy to finish Paintable after 1 hour Compatible with all paints and lacquers Highly resistant to moisture and condensation Safe on all building materials Tecryl is a professional acrylic sealant for sealing and filling all building materials The formulation guarantees a perfect finish with all types of paint, stain or varnish: with little or no risk of reactions such as paint cracking or discolouration Tecryl cures to a plastic consistency that perfectly follows the expansion and movement of the substrate, but does not dissolve or crack Instructions Apply to clean and dry to slightly moist substrate Spread dry or wet with spatula Can be repainted after 1 hour, depending on temperature and humidity. Remove any protective tape before skin formation to prevent damage to it Use X-Seal for expansion joints Improve adhesion and strengthen weak substrates such as aerated concrete or plaster by coating with diluted Tecryl (2 parts water to 1 part Tecryl) Test the adhesion on plastics, powder paints, exotic woods, bluestone And bituminous materials The perfect joint is as deep as it is wide (from 5 to 10 mm) The drying time depends on: the temperature of the product, the temperature of the environment, the temperature of the substrate, the layer thickness, the humidity of the substrate Do not use as glass sealant or as adhesive sealant. Not suitable for joints with standing water or with immersion Use XealPro as a sealant for wet joints in showers, baths and sanitary rooms
ds:
dsc:
kts: professional painting sealant for filling and joints white paintable (310 ml)
kpn: Tecryl
kpn_dash:
kpn_clear: Tecryl
bkpn: TEC7 Tecryl
bkpn_clear: TEC7 Tecryl
c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound
sr_no_br_cl_ns: 528100000
sr_ns: TEC7528100000

_

Click for more items in this promotion!

TEC7 535806000 all-glue oak RAL 1011 in cartridge (310 ml)

• Net volume: 310 ml
• EUH-statements: EUH208
• ADR packing group: Not applicable

Delivery time average 4 days.

11.29

€9.33 excl. VAT

[SEARCH SCORE
Sold desc:
1, 783.72, 9.33 ]
query took: 1779139586.9686

layer :



r: 03203844
p: 9.33
pid: 157061
b: TEC7
q: 0
st:
lt: 3
ean: 5414195535868
sr: TEC7 535806000
sr_no_br: 535806000
sr_no_br_cl: 535806000
sr_cl: TEC7535806000
sr_dash:
sold: 783.72
p_range: none
type: standard
act: 1
avo: 1
av: Net volume 310 ml EUH-statements EUH208 ADR packing group ADR class UN number Physical state Solid Packaging Cartridge Colour (manufacturer) Oak
n: TEC7 535806000 all-glue oak RAL 1011 in cartridge (310 ml)
cn: MS POLYMER
cn2: MS POLYMER
cn_clear: MSPOLYMER
d: Product description SEAL, BOND AND ASSEMBLE EVERYTHING Unique adhesion to almost all materials Very high bonding strength Fast strength build-up Cures up to -10°C Highest class in mould resistance Unique adhesion on difficult materials On dry and wet substrates Permanently elastic over the long term Highly UV-resistant and colourfast for indoor and outdoor use Safe on mirrors and insulation materials, no marking on natural stone Free of isocyanates, solvents and phthalates Water- and airtight Instructions Processing temperature between -10°C and +40°C. At temperatures below 0°C, curing will be greatly delayed Apply on clean, stable, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and a perfect finish In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Test the adhesion on plastics, powder paints, exotic woods and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer PT7 primer ensures optimal adhesion to difficult (LSE) plastics and powder coatings Tec7 cures through a reaction with (air) moisture Use Tec7 in lines, not in thick dots. Dots will cure much more slowly When used between two airtight materials, it is recommended to moisten one of the surfaces very slightly Use vertical glue strips to avoid moisture and dust accumulation Ideal adhesive thickness: 0.5 mm to 3 mm Thinner layers = higher strength, Thicker layers = higher elasticity Paintable after skin formation Do not use with alkyd-based lacquers and paints Use Tec7 Cleaner and/or Tec7 Powerwipes for cleaning tools and/or removing uncured Tec7. Clean hands and skin with Tec7 Powerwipes. Cured Tec7 can only be removed by mechanical means. The last residues can be removed with Remove All if the substrate can withstand it.
ds:
dsc:
kts: all-glue oak RAL 1011 in cartridge (310 ml)
kpn: 535806000
kpn_dash:
kpn_clear: 535806000
bkpn: TEC7 535806000
bkpn_clear: TEC7 535806000
c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer
sr_no_br_cl_ns: 535806000
sr_ns: TEC7535806000

_

Click for more items in this promotion!

TEC7 XealPro sealant light grey (310 ml) - 528006000

• Net volume: 310 ml
• ADR packing group: Not applicable
• ADR class: Not applicable

Delivery time average 5 days.

7.64

€6.31 excl. VAT

[SEARCH SCORE
Sold desc:
1, 757.2, 6.31 ]
query took: 1779139586.9686

layer :



r: 02786121
p: 6.31
pid: 155276
b: TEC7
q: 0
st:
lt: 4
ean: 5414195002889
sr: TEC7 528006000
sr_no_br: 528006000
sr_no_br_cl: 528006000
sr_cl: TEC7528006000
sr_dash:
sold: 757.2
p_range: none
type: standard
act: 1
avo: 1
av: Net volume 310 ml ADR packing group ADR class UN number Colour (manufacturer) Light grey EUH-statements EUH208 Physical state Solid Fire resistant No Packaging Cartridge Repaintable No
n: TEC7 XealPro sealant light grey (310 ml) - 528006000
cn: SILICONE
cn2: SILICONE
cn_clear: SILICONE
d: Product description THE NEW GENERATION OF SEALING AND FINISHING SEALANT The safe choice for all types of sealing work Very good chemical resistance and cannot be painted over Sanitary sealant for mould-resistant joint sealing XealPro combines the professional Tec7 quality with excellent application qualities XealPro adheres perfectly to almost all building materials and can be used safely everywhere: mirrors, sanitary facilities, kitchen worktops, ... It is fully CE-certified for all these applications. This new generation of sealant is based on environmentally friendly technology Unlike previous generations of silicone, XealPro contains no known toxic or harmful substances and is a completely MEKO-free silicone Instructions Processing temperature between +5°C and +40°C Apply on clean, stable and dry substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 products. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (telescopic piston is recommended) Test the adhesion on plastics, such as PE, PP and silicones, powder paints, exotic types of wood, bluestone and bituminous materials First reinforce weak and/or porous substrates with Poxy Primer Stain formation on natural stone cannot be excluded, therefore use Tec7 Rock as an alternative. Not paintable and not suitable for aquaria and swimming pools
ds:
dsc:
kts: sealant light grey (310 ml)
kpn: XealPro
kpn_dash:
kpn_clear: XealPro
bkpn: TEC7 XealPro
bkpn_clear: TEC7 XealPro
c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Silicone | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 silicone | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Silicone
sr_no_br_cl_ns: 528006000
sr_ns: TEC7528006000

_

Click for more items in this promotion!

TEC7 501903000 Super super superglue 20 ml

• Net volume: 20 ml
• Conseils de prudence (P): P101; P102; P264; P271; P280; P304 + P340; P305 + P351 + P338; P405; P501
• ADR packing group: Not applicable

Delivery time average 8 days.

6.39

€5.28 excl. VAT

[SEARCH SCORE
Sold desc:
1, 316.8, 5.28 ]
query took: 1779139586.9686

layer :



r: 02956401
p: 5.28
pid: 155403
b: TEC7
q: 0
st:
lt: 5
ean: 5414195011034
sr: TEC7 501903000
sr_no_br: 501903000
sr_no_br_cl: 501903000
sr_cl: TEC7501903000
sr_dash:
sold: 316.8
p_range: none
type: standard
act: 1
avo: 1
av: Net volume 20 ml Conseils de prudence (P) P101; P102; P264; P271; P280; P304 + P340; P305 + P351 + P338; P405; P501 ADR packing group ADR class 9 UN number UN3334 Principal hazard property GHS07 Harmful or irritant EUH-statements EUH202 H-statements H315; H319; H335 Hazard class GHS07 Harmful or irritant Physical state Liquid Flash point 87 °C Packaging Bottle Color Transparent
n: TEC7 501903000 Super super superglue 20 ml
cn: ADHESIVE
cn2: ADHESIVE
cn_clear: ADHESIVE
d: Product description HARD BROAD-SPECTRUM INSTANT ADHESIVE Cyanoacrylate adhesive Low viscosity and high adhesion For fast bonding and repair Small pot, great strength Super is a fast-curing adhesive based on cyanoacrylate Adhesives are resistant to temperatures from -30°C to +100°C Super bonds have high resistance to shearing forces and are shrink-proof Instructions Single-sided application on clean, dry, grease- and dust-free surface The thinner the adhesive layer, the stronger the bonding Press firmly for a few seconds
ds:
dsc:
kts: Super super superglue 20 ml
kpn: 501903000
kpn_dash:
kpn_clear: 501903000
bkpn: TEC7 501903000
bkpn_clear: TEC7 501903000
c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Adhesive | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 adhesive | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Adhesive
sr_no_br_cl_ns: 501903000
sr_ns: TEC7501903000

_

TEC7 Super Aktivator curing accelerator for Super instant glue (200 ml aerosol can) - 501105000

• Net volume: 200 ml
• Physical state: Aerosol
• Hazard class: GHS02 Flammable; GHS07 Harmful or irritant

Delivery time average 10 days.

7.45

€6.16 excl. VAT

[SEARCH SCORE
Sold desc:
1, 221.76, 6.16 ]
query took: 1779139586.9686

layer :



r: 03056683
p: 6.16
pid: 154920
b: TEC7
q: 0
st:
lt: 7
ean: 5414195003596
sr: TEC7 501105000
sr_no_br: 501105000
sr_no_br_cl: 501105000
sr_cl: TEC7501105000
sr_dash:
sold: 221.76
p_range: none
type: standard
act: 1
avo: 1
av: Net volume 200 ml Physical state Aerosol Hazard class GHS02 Flammable; GHS07 Harmful or irritant H-statements H222; H229; H319; H336 Conseils de prudence (P) P101; P102; P210; P211; P251; P280; P405; P410 + P412; P501 EUH-statements EUH066 Principal hazard property GHS02 Flammable UN number UN1950 ADR class 2 ADR packing group
n: TEC7 Super Aktivator curing accelerator for Super instant glue (200 ml aerosol can) - 501105000
cn: ACTIVATOR
cn2: ACTIVATOR
cn_clear: ACTIVATOR
d: Product description ACTIVATES SUPER Enables bonding on porous surfaces Makes compression unnecessary Increases the filling capacity of Super Super Aktivator speeds up the curing of Super and makes it even more versatile: Super cures in thicker layers after treatment and porous materials can now also be bonded Forms the ideal combination of strength, bonding speed and security, simplicity and perfect durability Also allows porous materials, such as bluestone, wood, chipboard, stone, etc., to be bonded with Super Instructions For gluing: Apply single-sided on clean, dry, grease- and dust-free surface Apply to the least porous surface Apply a fine layer of Super on the other surface Joint together and allow Super to cure For filling holes: Among other things, use dry and clean sand or sawdust as filler Apply Super until the filler is saturated Spray Super Aktivator from a distance of 30 cm The filler can be sanded after curing. Fill deeper holes in several layers to avoid overreaction
ds:
dsc:
kts: curing accelerator for Super instant glue (200 ml aerosol can)
kpn: Super Aktivator
kpn_dash:
kpn_clear: SuperAktivator
bkpn: TEC7 Super Aktivator
bkpn_clear: TEC7 SuperAktivator
c_path: Home / Technical and chemical products / Adhesives and sealants / Accessories and spare parts / Activator | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 accessories and spare parts / Tec7 activator
sr_no_br_cl_ns: 501105000
sr_ns: TEC7501105000

_

Click for more items in this promotion!

TEC7 FOAMTACK PRO CONSTRUCT spray adhesive foam (880 ml) - 670008000

• Net volume: 880 ml
• H-statements: H222; H229; H315; H317; H319; H332; H334; H335; H351; H362; H373; H413
• ADR packing group: Not applicable

Delivery time average 11 days.

10.72

€8.86 excl. VAT

[SEARCH SCORE
Sold desc:
1, 212.64, 8.86 ]
query took: 1779139586.9686

layer :



r: 03386865
p: 8.86
pid: 178033
b: TEC7
q: 0
st:
lt: 8
ean: 5414195023822
sr: TEC7 670008000
sr_no_br: 670008000
sr_no_br_cl: 670008000
sr_cl: TEC7670008000
sr_dash:
sold: 212.64
p_range: none
type: standard
act: 1
avo: 1
av: Net volume 880 ml H-statements H222; H229; H315; H317; H319; H332; H334; H335; H351; H362; H373; H413 ADR packing group ADR class 2 UN number UN1950 Principal hazard property GHS02 Flammable Number of components 1 Conseils de prudence (P) P101; P102; P210; P211; P251; P308 + P313; P405; P410 + P412; P501 Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS08 Health hazard Physical state Aerosol Based on Polyurethane Curing system Polymerisatie door (lucht-)vochtigheid Colour (manufacturer) Grey Fire resistant No
n: TEC7 FOAMTACK PRO CONSTRUCT spray adhesive foam (880 ml) - 670008000
cn: PU FOAM
cn2: PU FOAM
cn_clear: PUFOAM
d: Product description CERTIFIED ADHESIVE FOAM FOR LOAD-BEARING WALLS KOMO approved for load-bearing walls Fast processing, fast curing No mixing, no water needed No waiting time between brick layers Indoor and outdoor use 1 can of FoamTack Pro Construct = 160 kg mortar = 10 m² aerated concrete blocks Stronger than mortar KOMO-certified adhesive foam for all load-bearing and non-load-bearing constructions made of dimensionally stable materials such as calibrated quicklime brick, sand-lime brick (silicate brick), aerated concrete or concrete blocks (non-load-bearing). This is a strong alternative to bricklaying or use of powder adhesive. Fast curing and prevention of moisture penetration means the wall can be finished almost immediately (plastering, fitting windows, etc.). Work can be done quickly, without mixing and without waiting times between brick layers. 1 can of FoamTack Pro Construct is sufficient for 10 m² of aerated concrete blocks (600 x 250 x 150 mm). FoamTack Pro Construct is a non-intrusive adhesive foam, which ensures optimum contact between the materials to be bonded, even with hollow building blocks. It can be used at ambient temperatures between -10°C and +35°C.
ds:
dsc:
kts: spray adhesive foam (880 ml)
kpn: FOAMTACK PRO CONSTRUCT
kpn_dash:
kpn_clear: FOAMTACKPROCONSTRUCT
bkpn: TEC7 FOAMTACK PRO CONSTRUCT
bkpn_clear: TEC7 FOAMTACKPROCONSTRUCT
c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Pu foam | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 pu foam | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Pu foam
sr_no_br_cl_ns: 670008000
sr_ns: TEC7670008000

_

Click for more items in this promotion!

TEC7 535208000 all purpose slimmer white RAL 9016 in sausage (600 ml)

• Color: White
• ADR packing group: Not applicable
• ADR class: Not applicable

On stock, immediately available.

16.20

€13.39 excl. VAT

[SEARCH SCORE
Sold desc:
1, 160.656, 13.388 ]
query took: 1779139586.9686

layer :



r: 03203834
p: 13.388
pid: 155332
b: TEC7
q: 7
st: 1
lt: 1
ean: 5414195535288
sr: TEC7 535208000
sr_no_br: 535208000
sr_no_br_cl: 535208000
sr_cl: TEC7535208000
sr_dash:
sold: 160.656
p_range: none
type: standard
act: 1
avo: 1
av: Color White ADR packing group ADR class UN number Net volume 600 ml EUH-statements EUH208 Physical state Solid Packaging Cartridge Colour (manufacturer) White
n: TEC7 535208000 all purpose slimmer white RAL 9016 in sausage (600 ml)
cn: MS POLYMER
cn2: MS POLYMER
cn_clear: MSPOLYMER
d: Product description SEAL, BOND AND ASSEMBLE EVERYTHING Unique adhesion to almost all materials Very high bonding strength Fast strength build-up Cures up to -10°C Highest class in mould resistance Unique adhesion on difficult materials On dry and wet substrates Permanently elastic over the long term Highly UV-resistant and colourfast for indoor and outdoor use Safe on mirrors and insulation materials, no marking on natural stone Free of isocyanates, solvents and phthalates Water- and airtight Instructions Processing temperature between -10°C and +40°C. At temperatures below 0°C, curing will be greatly delayed Apply on clean, stable, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and a perfect finish In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Test the adhesion on plastics, powder paints, exotic woods and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer PT7 primer ensures optimal adhesion to difficult (LSE) plastics and powder coatings Tec7 cures through a reaction with (air) moisture Use Tec7 in lines, not in thick dots. Dots will cure much more slowly When used between two airtight materials, it is recommended to moisten one of the surfaces very slightly Use vertical glue strips to avoid moisture and dust accumulation Ideal adhesive thickness: 0.5 mm to 3 mm Thinner layers = higher strength, Thicker layers = higher elasticity Paintable after skin formation Do not use with alkyd-based lacquers and paints Use Tec7 Cleaner and/or Tec7 Powerwipes for cleaning tools and/or removing uncured Tec7. Clean hands and skin with Tec7 Powerwipes. Cured Tec7 can only be removed by mechanical means. The last residues can be removed with Remove All if the substrate can withstand it.
ds:
dsc:
kts: all purpose slimmer white RAL 9016 in sausage (600 ml)
kpn: 535208000
kpn_dash:
kpn_clear: 535208000
bkpn: TEC7 535208000
bkpn_clear: TEC7 535208000
c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer
sr_no_br_cl_ns: 535208000
sr_ns: TEC7535208000

_

Click for more items in this promotion!

TEC7 535706000 all-glue terracotta RAL 3012 in cartridge (310 ml)

• Net volume: 310 ml
• EUH-statements: EUH208
• ADR packing group: Not applicable

Delivery time average 11 days.

11.29

€9.33 excl. VAT

[SEARCH SCORE
Sold desc:
1, 111.96, 9.33 ]
query took: 1779139586.9687

layer :



r: 03203843
p: 9.33
pid: 155413
b: TEC7
q: 0
st:
lt: 8
ean: 5414195002544
sr: TEC7 535706000
sr_no_br: 535706000
sr_no_br_cl: 535706000
sr_cl: TEC7535706000
sr_dash:
sold: 111.96
p_range: none
type: standard
act: 1
avo: 1
av: Net volume 310 ml EUH-statements EUH208 ADR packing group ADR class UN number Physical state Solid Packaging Cartridge Colour (manufacturer) Terracotta
n: TEC7 535706000 all-glue terracotta RAL 3012 in cartridge (310 ml)
cn: MS POLYMER
cn2: MS POLYMER
cn_clear: MSPOLYMER
d: Product description SEAL, BOND AND ASSEMBLE EVERYTHING Unique adhesion to almost all materials Very high bonding strength Fast strength build-up Cures up to -10°C Highest class in mould resistance Unique adhesion on difficult materials On dry and wet substrates Permanently elastic over the long term Highly UV-resistant and colourfast for indoor and outdoor use Safe on mirrors and insulation materials, no marking on natural stone Free of isocyanates, solvents and phthalates Water- and airtight Instructions Processing temperature between -10°C and +40°C. At temperatures below 0°C, curing will be greatly delayed Apply on clean, stable, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and a perfect finish In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Test the adhesion on plastics, powder paints, exotic types of wood and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer PT7 primer ensures optimal adhesion to difficult (LSE) plastics and powder coatings Tec7 cures through a reaction with (air) moisture Use Tec7 in lines, not in thick dots. Dots will cure much more slowly When used between two airtight materials, it is recommended to moisten one of the surfaces very slightly Use vertical glue strips to avoid moisture and dust accumulation Ideal adhesive thickness: 0.5 mm to 3 mm Thinner layers = higher strength, Thicker layers = higher elasticity Paintable after skin formation Do not use with alkyd-based lacquers and paints Use Tec7 Cleaner and/or Tec7 Powerwipes for cleaning tools and/or removing uncured Tec7. Clean hands and skin with Tec7 Powerwipes. Cured Tec7 can only be removed by mechanical means. The last residues can be removed with Remove All if the substrate can withstand it.
ds:
dsc:
kts: all-glue terracotta RAL 3012 in cartridge (310 ml)
kpn: 535706000
kpn_dash:
kpn_clear: 535706000
bkpn: TEC7 535706000
bkpn_clear: TEC7 535706000
c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer
sr_no_br_cl_ns: 535706000
sr_ns: TEC7535706000

_

TEC7 WP7-202 Roof Tape aluminium sealing tape 50mm x 10m - 603060000

• Width: 50 mm
• ADR packing group: Not applicable
• ADR class: Not applicable

Delivery time average 9 days.

18.95

€15.66 excl. VAT

[SEARCH SCORE
Sold desc:
1, 93.966, 15.661 ]
query took: 1779139586.9687

layer :



r: 03197694
p: 15.661
pid: 122246
b: TEC7
q: 0
st:
lt: 6
ean: 5414195012000
sr: TEC7 603060000
sr_no_br: 603060000
sr_no_br_cl: 603060000
sr_cl: TEC7603060000
sr_dash:
sold: 93.966
p_range: none
type: standard
act: 1
avo: 1
av: Width 50 mm ADR packing group ADR class UN number Roll length 10 m Physical state Solid Thickness 0,7 mm
n: TEC7 WP7-202 Roof Tape aluminium sealing tape 50mm x 10m - 603060000
cn: SEALING TAPE
cn2: SEALING TAPE
cn_clear: SEALINGTAPE
d: Product description SEALING TAPE For permanent repair and protection Butyl tape on aluminium film Very high, immediate adhesion The composition of the butyl rubber mass guarantees a very high initial adhesion to most building materials The highly flexible rubber compound adapts to any shape and fills in unevennesses in the substrate The aluminium substrate is plastic-reinforced, making it tear-resistant, dimensionally stable and extremely weather-resistant Temperature- and UV-resistant Lead-coloured and paintable Instructions Application temperature between +5°C and +40°C Apply to clean, dry and stable substrate Cut to desired length and remove protective film Apply without air inclusions and press firmly
ds:
dsc:
kts: aluminium sealing tape 50mm x 10m
kpn: WP7-202 Roof Tape
kpn_dash: WP7
kpn_clear: WP7202RoofTape
bkpn: TEC7 WP7-202 Roof Tape
bkpn_clear: TEC7 WP7202RoofTape
c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 seals / Tec7 seals on length / Tec7 sealing tape
sr_no_br_cl_ns: 603060000
sr_ns: TEC7603060000